How can I operate multi displays on my Imac 21.5 quad core 2.5 and have each display function independently?
how can I operate multi displays on my Imac 21.5 quad core 2.5 using Lion and have each display function independently?
Below are some converters/adapters to look at. If these look like they may work:
USB 2.0 to HDMI Audio Video 1080P Adapter for Windows and Macbook
Matrox DualHead2Go D2G-A2D-IF (or look here)
These should allow you to run multiple displays in extended display mode. Note that these use HDMI as an output so you would need some additional adapter to conver HDMI to whatever your displays require. Of course these suggestions are all academic if such an adapter doesn't exist.
Update:
I just reread your last post and I am confused. Is it only your TV that you are trying to run in extended display mode? I thought you wanted more than two displays. If only the TV it should just work if you are not using mirrored displays. Your Displays Arrangement tab should show both your main screen (one with the little whith menu bar) and the TV. Set the proper resolution and refresh rate for the TV using it's Displays preference window. That is all you need to basically do (ignoring overscan/underscan problems).
Note, if you are using Lion then I have heard that when using full screen mode in Lion additional screens show nothing.
Similar Messages
-
Hi, how can I change my admin password without the reinstall of MAC OXS disk or whatever that is, I bought my macbook privately and cant update my adobe flash without the password which I have never set up. but anything I type in is wrong...... as a password.
ok have read all relivant posts and have tried the restart command+R which does absolutely nothing. My Computer opens up as usual.
I have found another response which suggests command+S and generate an entirely new admin. and password and you are not supposed to loose a single file.
Has anyone done this and been successful? I have just installed a new hard drive in the last 3 months and don't want to do any damage.
Hearing a success story would be nice. Thanks -
How can I promote a field in my form to a SharePoint 2010 list column and have it populated?
Hello,
I have created a form using some jquery, html and <td> tags. I would like to promote the fields that I am having users fill out in the form so that they appear in the list that the submitted form is writing to. Below is the code that I
have written, with some help of a great tool (Forms 7), is there another tag or class that I can input in order for the field names to appear in the list? I'm trying to also create a workflow and without these fields being columns I'm at a loss. Please help
<link type="text/css" rel="stylesheet" href="//ajax.googleapis.com/ajax/libs/jqueryui/1.10.0/themes/start/jquery-ui.css" />
<!-- Reference jQuery on the Google CDN -->
<script type="text/javascript" src="//ajax.googleapis.com/ajax/libs/jquery/1.8.3/jquery.min.js"></script>
<!-- Reference jQueryUI on the Google CDN -->
<script type="text/javascript" src="//ajax.googleapis.com/ajax/libs/jqueryui/1.10.0/jquery-ui.min.js"></script>
<!-- Reference SPServices on cdnjs (Cloudflare) -->
<script type="text/javascript" src="//cdnjs.cloudflare.com/ajax/libs/jquery.SPServices/0.7.2/jquery.SPServices-0.7.2.min.js"></script>
<script type="text/javascript" src="http://www.sharepointhillbilly.com/demos/SiteAssets/jquery.Forms7-0.0.03.js"></script>
<style type="text/css">
.error
{font-family:'Tahoma',sans-serif;font-size:10px;text-align:left;color:red;}
</style>
<script type="text/javascript">
$(document).ready(function() {
//Initialization function. Tells Forms7 which Query String Variable
//has the ID of the form, and the name of the list to read data from
$("#sampleForm").Forms7Initialize({
queryStringVar: "formID",
listName: "Contacts"
//helper function to load a drop downlist
//assumes there is a list called "States"
$("#PassSelect").Forms7LoadDDL ({
listName: "Passengers",
firstOptionText: "Select",
fieldName: "Title"
//apply the jQueryUI calendar to the DepartDate field
$( "#DepartDate" ).datepicker({
changeMonth: true,
changeYear: true,
//apply the jQueryUI calendar to the ReturnDate field
$( "#ReturnDate" ).datepicker({
changeMonth: true,
changeYear: true
//function to load the city drop down list to only show cities for the selected state
function LoadCities(stateID)
//helper function to load a cascading dropdown list
//in this example it would load Cities from a list called "Cities"
//where that list had a lookup field called "State" and it would
//use the ID of the selected State
// $("#CitySelect").Forms7LoadChildDDL({
// parentID: stateID,
// parentField: "State",
// listName: "Cities",
// firstOptionText: "Select City",
// fieldName: "Title"
function SubmitForm()
//When the form is submitted store it to the specified list
//also pasas in the x and y offset of error messages for elements
//this allows you to change their location in reference to the form field
$("#minimalForm").Forms7Submit({
listName: "Reservations",
errorOffset"Apple-tab-span" style="white-space:pre;">
errorOffsetnbsp; completefunc: function(id) {
alert("Save was successful. ID = " + id);
window.location = window.location.pathname + "?formID=" + id;
</script>
<div id="minimalForm" >
<table width="100%" cellpadding="10" cellspacing="0" >
<tr bgcolor="white">
<div id="minimalForm" >
<br><img src="http://BannerImage.jpg" width="400" height="160" alt="AltImageName" align="middle">
<font size="6">Vehicle Request Form</font>
<font size="1">Last Modified: 03/21/2014</font></br>
<hr><b></hr></b>
<p>
</p>
<hr>
<br><font size="3"><b>Forms on File</b></u></font></br>
<hr>
<font size="2"><b>NOTE:</font></b> <font size="1">The following forms must be on file with Human Resources before you can use a vehicle. Only fill out the third form if you need to notify HR about any activities
that may affect your eligibility to operate a motor vehicle
</font>
<br><a href="url"><font size="3">1) Driver's History Consent Form </a>
<br><a href="url"><font size="3">2) Driver Qualification Procedure Acknowledgement Form</a>
<br><a href="url"><font size="3">3) Driver Qualification Procedure Notification</a>
<br>
<br><font size="1"><b>These forms must be signed and submitted to Human Resources every 6 months.</font></b>
<br><font size="1">Do you currently have these forms on file with Human Resources?</font>
</font>
<hr>
<table>
<td><font size="3"><b><u>Driver Information</b></u></font></td>
</table>
<table>
<tr bgcolor="white">
<br>
<td class='formLabel'>First Name:</td>
<td class='formLabel'><input title="First Name" id='FirstName' data-displayname="DriverFirstName"class='required formInput' maxlength="40"></td>
<td class='formLabel'>Middle Name:</td>
<td class='formLabel'><input title="Middle Name" id='MiddleName' class='formInput' maxlength="1"></td>
<td class='formLabel'>Last Name:</td>
<td class='formLabel'><input title="Last Name" id='LastName' class='required formInput'maxlength="40"></td>
</tr>
<tr bgcolor="white">
<td class='formLabel'>Email:</td>
<td class='formLabel'><input title="Email" id='Email' class='required formInput' maxlength="40"></td>
</tr>
<tr bgcolor="white">
<td class='formLabel'>Supervisor Name:</td>
<td class='formLabel'><input title="SupervisorName" id='SupervisorName' class='required formInput' maxlength="40"></td>
</tr>
</table>
<hr>
<table>
<td><font size="3"><b><u>Passenger Information</b></u></font></td>
</table>
<table>
<tr bgcolor="white">
<br>
<td class='formLabel'>Passenger Name:</td>
<td class='formLabel'><input title="First Name" id='PFName' class='required formInput' maxlength="40"></td>
<td class='formLabel'>Middle Initial:</td>
<td class='formLabel'><input title="Middle Name" id='PFName' class='formInput' maxlength="1"></td>
<td class='formLabel'>Last Name:</td>
<td class='formLabel'><input title="Last Name" id='PLName' class='required formInput'maxlength="40"></td>
</tr>
<tr bgcolor="white">
<td class='formLabel'>Email:</td>
<td class='formLabel'><input title="Email" id='PEmail' class='required formInput' maxlength="40"></td>
</tr>
<tr bgcolor="white">
<td class='formLabel'>Passenger Supervisor Name:</td>
<td class='formLabel'><input title="SupervisorName" id='PSuperVisorName' class='required formInput' maxlength="40"></td>
</tr>
<tr bgcolor="white">
<td class='formLabel'>Number of Additional Passengers:</td>
<td class='formLabel'><select title="Pass#" id='PassSelect' class='formInput' onchange="LoadPassengers(this.value);"></select></td>
</tr>
</table>
<hr>
<table>
<td><font size="3"><b><u>Reservation Duration</b></u></font></td>
</table>
<table>
<tr bgcolor="white">
<br>
<td class='formLabel'>Depart Date:</td>
<td class='formLabel'><input title="Depart Date" id='DepartDate' class='required formInput' isDate="yes" validate="validDate" onchange="validDate(this.value,this);"></td>
<td class='formLabel'>Return Date:</td>
<td class='formLabel'><input title="Return Date" id='ReturnDate' class='required formInput' isDate="yes" validate="validDate" onchange="validDate(this.value,this);"></td>
</tr>
</table>
<hr>
<table>
<td><font size="3"><b><u>Travel Information</b></u></font></td>
<tr bgcolor="white">
<td class='formLabel'>Please describe reason for request:</td>
<td class='textbox' height='20' width='30'><input title="DestInfo" id='DestInfo' class='required formInput' maxlength="500"></td>
</tr>
</table>
</hr>
<p></p>
</br>
<input type="button" value="Submit/Update Request Form" onclick="SubmitForm();">Hi,
If you want to add fields to a list, as you have written your form in JavaScript, you can take consideration of using JavaScript Client Object Model to add/delete fields dynamically.
How to: Create, Update, and Delete Lists Using JavaScript
http://msdn.microsoft.com/en-us/library/office/hh185005(v=office.14).aspx
If you want to achieve it with Form7, it is recommended to post the question to its forum to get quick and confirmed answer.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support -
My iPhone 4 will not open my purchased apps, anyone know what is going on? I just recently bought a new laptop and downloaded iTunes onto and synced my phone. I was also talking on my phone and it died, then I charged it and that is when the apps would no longer open. My mail, and iPod and safari work just not the purchased apps, if anyone know please write back!:)
Try downloading any free app to resync your iTunes account.
-
I am needing to create a line graph with dates consisting of MM/DD/YY along the category axis. I would like to rotate the labels 45 degrees and have them stay when I update the graph. I have read about manually doing it, I even made an action to make it faster, but it still seems inefficient. Is there a setting that I could use to automatically create my labels as rotated? Thanks.
Hi Gravy Train,
I'm curious about why you are using 2 loops. You mentioned one is for monitoring and one is for DAQ....what do you mean by that? What is the overall goal of this piece of code. Also, I noticed that you are not closing the task. Since this is just a subset, I realize you could be closing it in your actual code, but just in case you're not.....it is very important that you close all tasks when you are down acquiring data.
Best Regards,
Starla T -
TS3999 How can I restore deleted items to my iMac which are still in the calendar in my iCloud?
All the events in the Calendar on my Imac have disappeared but are still shown on the Calendar in Icloud. How can I restore the data to my Imac?
Hello there,
It sounds like you have verified that your canlendar data is stored in http://www.icloud.com and would like to get that info back into your calendar application on your computer. I would start by using the troubleshooting in the following article named:
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Make sure that your account was successfully created in Calendar (or iCal) on your Mac. After upgrading to iCloud Calendar, you may need to quit and reopen Calendar (or iCal). To confirm that your account is configured correctly in Calendar (or iCal):
Open Calendar (or iCal).
Open Calendar (or iCal) Preferences.
Click Accounts. You should see an account with your iCloud member name in the Apple ID field.
Turn iCloud Calendars off and back on:
Quit Calendar (or iCal).
Choose Apple () menu > System Preferences, then select iCloud.
Deselect the checkbox next to Calendars (or Calendars & Reminders in Mountain Lion and Lion).
Close System Preferences and wait about a minute.
Open System Preferences and select iCloud.
Replace the checkmark next to Calendars (or Calendars & Reminders in Mountain Lion and Lion).
Close System Preferences.
Open Calendar (or iCal) and test to see if the issue is resolved.
Restart your computer. This may sound simple, but it reinitializes your network and application settings and can frequently resolve issues.
Thank you for using Apple Support Communities.
Take care,
Sterling -
How can I operate my iMac from my Macbook Pro?
how can I operate my IMAc from my Macbook Pro?
Explore Target Display Mode:
https://support.apple.com/kb/PH19038?locale=en_US
Ciao. -
How can I change the display of Inbox in my iPad's mail app- so that it takes up the full screen?
How can I change the display of Inbox in my iPad's mail app- so that it takes up the whole screen, as opposed to just about one third; the other two thirds display the full text of the selected email?
You can't change the display in the Mail app, if you are holding the iPad in landscape orientation then the left-hand third will be for navigation, and the right-hand two-thirds will be an email. If you hold the iPad in portrait orientation then the navigation section becomes a drop-down section.
-
How Can I get multi column values from dynamic search help?
Hi Gurus;
I'm using dynamic search help in my program.
I want to get multi column values from search help. But I dont know solution for this issue.
I'm using F4IF_INT_TABLE_VALUE_REQUEST FM.
How Can I get multi column values from dynamic search help?
Thanks.Believe it or not, the same FM worked for me in a dynpro. I will try to explain here how it works in custom screen and then you can do your work for other screens or program types. I am not going to write my actual work but will explain in general.
I have 4 fields (FLD1, FLD2, FLD3, FLD4) and i made the search based on FLD2 and when user click on a line (could be any field), then this would bring the line on to the screens.
There are like 3 steps.
You have your value_tab for my fields FLD1, FLD2, FLD3 and FLD4. This is just the data that we pass into the FM. (data: IT_VALTAB type table of ZVAL_TABLE)
Next map the screen fields into an internal table (data: It_dynpfld type table of dselc ). I also have other internal tables defined (just to keep it straight, i will be putting here) data: It_return type standard table of ddshretval.
Next step is to call the function module. Make sure you have values in IT_VALTAB.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
retfield = 'FLD2'
value_org = 'S'
tables
value_tab = It_VALTAB
return_tab = It_return
dynpfld_mapping = It_dynpfld
exceptions
parameter_error = 1
no_values_found = 2
others = 3.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
else.
perform get_selected_fields tables It_return.
endif.
The code within the perform GET_SELECTED_FIELDS - We need to map the result fields after user selects it. The code goes like this. This is step is to update the dynpro fields.
I need a internal table as well as a work area here. like,
data: lt_fields type table of dynpread,
la_fields type dynpread.
field-symbols: <fs_return> type ddshretval.
so fill out LT_FIELDS from the IT_RETURN table
loop at lt_return assigning <fs_return>.
la_fields-fieldname = <fs_return>-retfield.
la_fields-fieldvalue = <fs_return>-fieldval.
append la_fields to lt_fields.
clear: la_fields.
endloop.
Call the FM to update the dynpro
call function 'DYNP_VALUES_UPDATE'
exporting
dyname = sy-repid
dynumb = '1002' "This is my screen number. You could use 1000 for selection screen (hope so)
tables
dynpfields = lt_fields
exceptions
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
others = 8.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
good luck -
How can i adjust my display on videos. Result is dark same as with the camera . Thank you
How can i adjust my display on videos and camera. Result is dark same as with the macbook camera . When i play videos , its dark . Please help.
Thank youSolution may be found if you search in the "More Like This" section over in the right column.
By camera you mean "iSight" try the suggestions in the article http://support.apple.com/kb/HT2090 and on EZJim's Website. If no help, post in the iSight forum area. -
How can I use two displays with my Mac Mini?
How can I connect two displays to my Mac Mini (newest generation with one thunderbold and one hdmi)?
Have you tried connecting one to the HDMI output, and another to the Thunderbolt port (with the appropriate Mini DisplayPort-to-other connection adapter as needed)?
-
How can I add multi columns to a JCombo Box ?
Dear experts,
How can I add multi columns to a JCombo Box ?
Thankx in advance
UniqueWhat do you mean by adding Multiple columns? JCombobox is a component in which you can choose a value from a list(rows) of values. Could you please explain why do you want multiple columns in the JComboBox. I suppose JComboBox is not meant for that.
Thanks,
Jana -
How can I get Sender Display Name using Get-MessageTrackingLog?
Hi, could you please help me. We have got a monitoring system at work which monitors some devices, so if something wrong happening with these devices email is sent from MASTER email (Customer Name <[email protected]>) to us. I'm trying to get a list
of all emails of that monitoring mailbox using PoweShell command
Get-MessageTrackingLog and export them to CSV file. In the end of the day I need CSV file with 3 columns: TimeStamp, MessageSubject and SenderDisplayName! Yes, I need Sender Display Name cause all emails are sent from one MASTER email
(Customer Name <[email protected]>) and only difference between them is sender Display Name which is cexactly what I need.
This is the code I'm using:
Get-MessageTrackingLog -EventId Receive | Select Timestamp, MessageSubject, Sender | Export-CSV C:\NagiosAlerts.csv
–NoTypeInformation
So how can I get sender Display Name(Customer Name) using Get-MessageTrackingLog insted of Sender email (<[email protected]>)?The DisplayName is not recorded in the Logs only the EmailAddresses are so there Is nothing you can do with Message Tracking to get this the way you want. You need to look at another property may soureIP or include something in the Subject
of the Email (eg a customerId in the Subject is a much better option) to give you some differentiation. Otherwise you need to access the Email directly from the Mailbox it was sent to and then extract the DisplayName from the message (or use a journaling
on those emails etc)
Cheers
Glen -
How can I get Multi-color text it a swing componet?
How can I get Multi-color text it a swing componet?
I've tryed JTextPane and JEditorPane.
If they support having text in more then one color then I don't see how.
I want to make a color-coded Java editor in Java, but I can't color-code if I can only have one color.
JComponent.setForeground(Color fg)
is not what I need.
maybe Java doesn't support it yet.
but I hope it does.
Please help, thanks.Hi,
I've made you a little example with a coloured JEditorPane and JTextPane:
import javax.swing.*;
import javax.swing.text.*;
import java.awt.*;
import java.awt.event.*;
public class ColorDemo extends JFrame {
public ColorDemo() {
super("ColorDemo");
// coloured JEditorPane
JEditorPane editorPane = new JEditorPane("text/html",
"<FONT color=red> This </FONT>"+
"<FONT color=blue> is </FONT>"+
"<FONT color=green> a </FONT>"+
"<B> JEditorPane </B>");
editorPane.setPreferredSize(new Dimension(250, 150));
// coloured JTextPane
JTextPane textPane = new JTextPane();
textPane.setPreferredSize(new Dimension(250, 150));
Document doc = textPane.getDocument();
Style def = StyleContext.getDefaultStyleContext().
getStyle(StyleContext.DEFAULT_STYLE);
try {
StyleConstants.setForeground(def, Color.blue);
doc.insertString (0, "This ", def);
StyleConstants.setForeground(def, Color.red);
doc.insertString (5, "is ", def);
StyleConstants.setForeground(def, Color.green);
doc.insertString (8, "a ", def);
StyleConstants.setBold(def, true);
StyleConstants.setForeground(def, Color.black);
doc.insertString (10, "JTextPane", def);
} catch (Exception e) {}
JPanel contentPane = new JPanel();
contentPane.add(textPane);
contentPane.add(editorPane);
setContentPane(contentPane);
public static void main(String[] args) {
JFrame frame = new ColorDemo();
frame.addWindowListener(new WindowAdapter() {
public void windowClosing(WindowEvent e) {
System.exit(0);
frame.pack();
frame.setVisible(true);
}Hope this helps,
Kurt. -
how can I get a display of all running programs in lion like I used to get when I did a 4 finger swipe in snow leopard?
I liked to turn off running programs without a window that I was no longer using
thanks.
Best I can do now is to open the "force quit" window and click on programs I want to stop and then send each one a "command-Q" and then repeat as necessary
JeffCommand + Tab is what you are after i think
Maybe you are looking for
-
Hi, In Microsoft Test Manager I am trying to add a link in the expected reults tab, so the person testing the test case can click on the link without closing down anything. I am able to add the link in the expected results area, but there is no hyper
-
Hashtable with more than two columns??
Hi. i'm trying to make a cache in java. the cache neeeds to have three values per index location, Flag,Tag and Data. Is there anything in java that can have three values?? I know hashtables can have two (one key, and one value), but i need one more,
-
SRM 7.0 - customizing for print forms
Hi gurus, we want to use adobe forms for print forms. In customizing we are able to switch from smartforms to adobe forms (sap note 1264423). While we are encountering problem in configuring differents output actions for certain documents: i.e. pri
-
IMovie '13 - v.10.0 - exporting in SD (640 x 480)???
The new version of iMovie lost a lot of its features and is clearly focused toward the social media side of things. After importing using SD cameras that import video in a *square* PiP format, I am finding it impossible to update any of my settings t
-
i want to unlock my ipod with a computer that i am using using now i have synced it with a pc which is now in another country , so what should i do now ?