How can I organise my projects by date?
How can I organise my projects by date?
Oddly enough, there is no option I know of to organize by date or even by name. Later projects I've created end up between earlier projects I've done.
Maybe something to suggest via the "Create an idea" action? (Go back out to the discussions and you should see it in the upper right.)
Similar Messages
-
How can you open a project file backup if the main project won't load?
This has only started happening in the last couple of weeks. I'm on Logic 10.0.7, OSX 10.8.5. On one particular project, it will be loading seemingly normally, then it just disappears with no crash log, nothing.
Presumably there is some sort of corruption in the project file.
In the old pre package days, you would just go to the project file backups folder and pick a previous one. Bingo, you have only lost a little bit of work.
Now when I show package contents, the project file backups folder has project data files that won't open logic, and are invisible until you have logic open. Which I can't do.
Rue the day I selected the package option rather than folder.
Any suggestions?
Or to put the question another way, how can I convert the project data in the project file backups folder to a file that Logic can recognise and open?Having his install the trial is the way to go. Working between AI versions is a pain and as you are finding out almost impossible with 5 versions between the collaborators.
-
How can I include merged projects in the printed documentation?
I have a master project with several merged projects. This works splendid with online documentation, but when I am asked to provide a printed version, it seems I have to create separate documents for each merged project.
Is there any setting or fix that enables print also of merged projects and topics when I create printed documentation?
Pretty please with sugar on top :-)Hm - there is a contract with the customer, saying that he wants documentation both as word and pdf, and as we now aim at only writing online documentation, these tasks create extra work, as we are delivering updates each month
But yes - two beasts, where only chm is actually needed we think.
-Tone
Date: Tue, 3 May 2011 06:53:04 -0600
From: [email protected]
To: [email protected]
Subject: How can I include merged projects in the printed documentation?
Hi there
I'm a bit curious as to the reasoning behind your "persuation process for using chm-files only".
CHM files and printed documentation are two entirely different beasts.
Cheers... Rick
| http://www.robowizard.com/pc.gif | Helpful and Handy Links
http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
http://www.gooberguides.com/ProductPages/RoboHelp/RoboHelp82Day.htm
http://www.ShowMeSolutions.biz
http://sorcererstone.wordpress.com/
http://www.gooberguides.com |
> -
How can I make a query by date with several TDMS files?
Hi,
I have a project that can write and read TDMS files everyday (a file for each day with date and time). There, I can import those files to excel (I choose a file and load it). But, I have a question: How can I make a query by date with those TDMS files? I'd like make a time stamp for start date and stop date, where I could compare the TDMS file dates and sum the values that are in the channels where these files are similar. For example, I save a file with "02/01/2013" name, in other day "03/01/2013", in other day "04/01/2013"... so, i'd like put in time stamp for start date "02/01/2013" file and to stop date "04/01/2013" file, than, sum all values that range with my TDMS files existing. How can I make that?
Thanks all,
ValHello Val_Auto.
You're Brazilian, no? Me too. = ^ - ^ =
I converted VI to version of your LabVIEW (8.5). Is attached in this reply.
This VI search all your TDMS in a range of dates and join them in a single TDMS. I hope this is what you wanted.
Query TDMS is the main VI. The TDMS VI Search changes the date format that out from calendar control (which is DD / MM / YYYY) to DD-MM-YYYY. This is because you can't name files using "/". I chose "-" but, if necessary, you should change to keep the same format of your TDMS files.
If you have any doubt as to its operation or how to make changes to adapt VI for your application, keep at your disposal.
Thank you for your contact; I hope have helped you and succeed in your application.
Wesley Rocha
Application Engineer
National Instruments Brazil
Visite a nossa comunidade em PORTUGUÊS!!!
Attachments:
Query TDMS.vi 62 KB
tdms search.vi 24 KB -
How can I update the project varibles in OBPM 10.3
Hi All,
OBPM version : 10.3.2 (weblogic Enterprise version)
How can I update the project variables from the External process?
I per my knowledge we use termination wait activity and notify the same from the external process. I am successfully do this but I am facing the performance issue with this and sometimes even data sources pool is getting exhausted.
Could you please tell me is there any other way to update the project variables?
Thanks in advance.
Narasimha
Edited by: Narasimha on Mar 2, 2011 4:19 AMI do not disagree with Mark about using Message Waits to update project variables. I'm right in the middle of logic right now that is doing just that.
If you have thousands (or in your case millions) of instances to update all at once, you might want to also want to consider another approach. I obviously do not know your process and sure you've thought of this, but you could use a database to store this same information that you are currently using project variables for. You'd need a table that has the instance's unique id (e.g. case id, loan number, claim number) as the primary key and then have columns to store the information you are currently storing in project variables.
Taking this approach, you'd be updating the milliions of rows in the database very quickly. You could still have project variables in your process, but they would be set at the beginning of a Screenflow or in an Automatic activity using a SELECT statement against the database table using the unique id of the instance as the key.
Dan -
I recently updated my Premiere Pro CC at home to 2014.1 and now can't open my projects at school where they are using Premiere Pro CC 2014. (which was up to date last week) Since I don't know how long it will take for them to update all of the computers, (based on past experience) How can I make my project compatible between these 2014 versions?
I've tried to export the project as a Final Cut XML file, but didn't have luck with that.Hi Benjamino5,
There is no backward compatibility in Premiere Pro. It's not ever been a feature. The only way backward is by using XML but it sounds like you had problems with that. Please let us know your specific issue here: http://adobe.ly/ReportBug
I was speaking about forward compatibility. A number of people have had problems updating the project file with this version. While it should not cause too many issues, it is a general rule of thumb to never update your project file to a new version part way through a project.
It's rather unfortunate that this formerly hardcore stance (to not update project files until done) has been forgotten or is simply not known to many editors, both new and old. Updating a project file should never be done unless absolutely necessary. As a former instructor, I would make sure that all my students were aware of this potential project killing issue.
Backward compatibility is a long standing feature request. Make that in the same place as the bug report. Hope that helps.
Thanks,
Kevin -
How can we get Dynamic columns and data with RTF Templates in BI Publisher
How can we get Dynamic columns and data with RTf Templates.
My requirement is :
create table xxinv_item_pei_taginfo(item_id number,
Organization_id number,
item varchar2(4000),
record_type varchar2(4000),
record_value CLOB,
State varchar2(4000));
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'USES','fever','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'HOW TO USE','one tablet daily','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'SIDE EFFECTS','XYZ','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'DRUG INTERACTION','ABC','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'OVERDOSE','Go and see doctor','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'NOTES','Take after meal','TX');
select * from xxinv_item_pei_taginfo;
Item id Org Id Item Record_type Record_value State
493991 224 1265-D30 USES fever TX
493991 224 1265-D30 HOW TO USE one tablet daily TX
493991 224 1265-D30 SIDE EFFECTS XYZ TX
493991 224 1265-D30 DRUG INTERACTION ABC TX
493991 224 1265-D30 OVERDOSE Go and see doctor TX
493991 224 1265-D30 NOTES Take after meal TX
Above is my data
I have to fetch the record_type from a lookup where I can have any of the record type, sometime USES, HOW TO USE, SIDE EFFECTS and sometimes some other set of record types
In my report I have to get these record typpes as field name dynamically whichever is available in that lookup and record values against them.
its a BI Publisher report.
please suggestif you have data in db then you can create xml with needed structure
and so you can create bip report
do you have errors or .... ? -
How can I open a project made in 2000 on Final Cut Pro to migrate it to a new version?
how can I open a project made in late 2000 on Final Cut Pro to migrate it to a new version to finish editing it? files, timeline and unfinished edit are all stored on hard drive since early 2001, with all the original miniDV tapes still in hand
Do you still have legacy FCP? If you not you need to find someone who will open the project in FCP6.0.6 or later. Export an XML file of the project. Use 7toX to convert it to an XML format that works with FCPX. Import the converted XML file to FCP.
-
how can i get acsess to my data if my iphone is shut and can´t open any more??how can i get acsess to the memory card????please help
You can't. There is no memory card. It uses flash memory that's soldered to the logic board. If you didn't back it up, your data is gone.
-
How can I export a project on an external drive in the latest version of iMovie?
Before the latest release of iMovie I easily managed to export a project on an external usb drive and re-import such project on a different Mac... In the latest iMovie version, however, I cannot see my drive any more..
So, how can I export a project on an external drive in the latest version of iMovie?
Thank you in advanceI'm not sure this is the best way, but you could create a new iMovie Library, move your project to that Library, then close the library. Then move the Library to your USB drive. Then, on the other Mac, in iMovie open the Library.
-
I have no problems copying iMovie Events from one Mac to another, however, how can I copy iMovie Projects from one Mac to another? Any help will be appreciated. Thank you.
This should give you some good insight, I'd probably store them on an External HD on the old machine and then just drag and drop to the new machine.
https://discussions.apple.com/docs/DOC-4141 -
How can I move my project from external hard drive to my macbook pro?
How can I move my project from external hard drive to my macbook pro? every time I try to do some editing, the sequence is very slow, thanks in advance
Try here...
Setting-up a new Mac from an old one, its backups, or a PC -
How can we update the last synchronization date and time..on SUP in sccm 2012 R2
Hi,
Can you any one please guide me how can i update the last synchronization date & time in SUP on SCCM2012 r2 , some how its updated as future date and when ever i try to synch the SUP with disconnected WSUS its shows in the wsyncmgr.log
"Wakeup for a polling cycle " and " Wakeupby inbox drop" and "Wakeup by SCF change"
Thanks
Balaji KYou'll probably have to call CSS on this one as this not normal by any means. The messages you noted above are completely normal but if that's all you are seeing then there's an issue.
Have you reviewed wcm.log and wsusctrl.log?
Jason | http://blog.configmgrftw.com | @jasonsandys -
How can I share a project specific calendar I created on Entourage 2008 ?
How can I share a project specific calendar I created on Entourage 2008 without showing my personal calendar? I created a project specific calendar using Entourage 2008 for Mac. I want to add someone that uses Outlook from a PC. We are in the same exchange network. I have added this person in under the sharing tab, but don't see a way to invite her to view it, and it does not appear on her Outlook list of shared calendars. I was able to invite her to view my main calendar, but not the project specific one. Any suggestions?
http://www.microsoft.com/mac/support
-
How can I import an project .imoviemobile file to imovie 10.0.6 on my mac book for further processing?
You can't. (http://www.macworld.com/article/2057972/imovie-for-ios-projects-no-longer-work-o n-the-mac.html)
Geoff.
Maybe you are looking for
-
IPod cannot be updated because there is not enough free space
iPod cannot be updated because there is not enough free space to hold all of the songs in the iTunes music library. But my iPod does not show any songs. This all strated when I plugged the iPod in to the computer to charge it. I lost my songs on the
-
Help me! I have a new iPad mini that won't turn on. It was working fine this morning then i turn it off and it never turns back on. it doesnt register with iTunes and resetting isnt working either. All I did is download instagram and snapchat and poo
-
Location of Contacts Server Files
Hi, Where are the files placed on the server when a user creates/imports/manages their Contacts on a Mountain Lion Server Contacts Server? Example: I have a Mountain Lion Server running the latest 10.8.2 updates with Contacts sharing turned on in the
-
Excel ActiveX: Server Execution Failed Error
I'm using my own ActiveX VIs to control Excel. I take a text file and create a chart from some of the columns, then print the chart. I'm getting a "server execution failed" error when I call PrintOut on the chart object. I understand this error stems
-
Javascript window.open telephone link not working
Hi, I have an HTML 5 web app that uses Sencha touch for the ipad and iphone. I'm having a problem with some code that use to work, when a user clicks a phone icon it should prompt them to call that person if they are on an iphone. After updating to t