How can I output audio to a different output than video?

I am using STP to do some ADR work and I am having the following issue:
Whenever I play back my material which has a 720p video track, both the audio and the video go out of my Kona LHe. I want to be able to separate the audio to go to a different hardware output from the video. Is there a way to do this?

Hi. I'm running STP 2.0.2 with 5.1 audio through an RME Fireface 400 and sending the video via HDMI from a Black Magic Intensity card to an LCD TV. If I can refer you to page 318 of the manual it states that "When you use a video output device that supports both video and audio output, Soundtrack Pro automatically routes your audio output to this device to provide the best possible synchronization of the audio and video". Therefore not a bug, but a default built into STP.
I'm sure they are correct, but cannot see why this was not added as a preference option. My solution has been to run the LCD TV as a second monitor through it's PC input, which works fine but does not give HD image. I have tried many options (All combos of available audio preferences for system and STP) without success. My next plan is to cut the HDMI cable and disable the audio if possible, but this may not work due to the nature of HDMI (System may believe the HDMI output is an audio capable video device even though audio path has been severed).

Similar Messages

How can I make a link a different color than the other links according to the current page?

Hello. I have created a navigation bar. And I would like to style the links to have the current page link a different color than the other links. For example, if all of the links have a black background, I would like to have the current page link to have a white background. The reason that I would like to style them this way is so that the visitor knows what page is being visitied.
I tried different ways but all of them did not show to make any change to the links. This is what I have so far. The links work, but all of them have the same color and background. When on the home page, I would like to have the home page link to have a white background with black letters. I would appreciate your advice.
<head>
ul {
 list-style-type: none;
 text-align: right;
 padding-top: 10px;
 padding-bottom: 6px;
 padding-right: 10px;
li {
 display: inline;
a:link {
 color: #FFF;
 background-color: #000;
 text-align: center;
 padding-top: 8px;
 padding-right: 8px;
 padding-bottom: 8px;
 padding-left: 7px;
 text-decoration: none;
a:visited {
 color: #FFF;
 background-color: #000;
 text-decoration: none;
a:hover {
 color: #000;
 background-color: #FFF;
 text-decoration: none;
a:active {
 color: #FFF;
 background-color: #000;
 text-decoration: none;
a.menu:link {
 color: #000
 background-color: #FFF;
 text-decoration: none;
</head>
<body>
<div class="navigation">
 <ul>
 <li class="menu"><a href="index.html" target="_self">HOME</a></li>
</body>
Thank you very much.

http://www.itworld.com/development/351097/setting-active-menu-item-based-current-url-jquer y

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

My Ipad 2 external speakers does not work and headphones has popping sound. This all occured at the same time as my Iphone and Ipod headphones only played mono (no, the "mono" option is not on). How can there be audio issue for all these devices?

My IPad 2 external speaker does not work and the original headphones have popping sound when used. This all occurred at the same time as my IPhone and IPod headphones only plays mono (and no, the "mono" option is not on) with the original headphones, as well as, other headphones tested. How can there be audio issue for all these devices at the same time?
As you may have noted from the list of Apple devices I own, I believed in the Apple and the products it was producing; but it is hard to believe from my experience and the other voices within the Apple Community that we are all experiencing the same hardware issues. Especially since I recently, I upgraded to an IPhone 4g (no, my faith in IPhone 5 series is very little) and is experiencing the same audio problem as described above. So now, I am off to the Apple store again to be told that it’s a hardware problem on new IPhone. Really? Apple, what happen to the pride in the product you were producing?

Everyone does things a little differently. I love to "jam " along with iTunes ( or old Lp's) . Always have. That's where/how I've learned to play .
I'm sure leonieDF is giving a proper way to jam along on a keyboard with an iTune. He blows my mind all the time with what he knows. Nuff respects to him !
What I do is make a GB project I call "Jam With". I'll make several new tracks that are blank. Just has a few instruments named in the blank tracks. You can change those per song ...
Because I'm not concerned about changing the pitch / key.... of the iTune or the tempo ... I can simply play along with it.
Peace,
P. Dreadie

How can i use audio through hdmi on mac book pro i have video no audio version10.6.8

how can i use audio through hdmi on mac book pro i have video no audio version 10.6.8 in audio it just has internal speaker options

Hello,
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there.

How can I send email using two different email address that both link back to my one exchange account on my Ipad mini

How can I send email using two different email address that both link back to my one exchange account on my Ipad mini?
On my PC I simply have a master return email address and use a POP for the secondary address. Both are through the one exchange account without a problem. I need to be able to do the same on my Ipad.

Ah, I should have made that clear. My domain didn't come from google. It was purchased at and is hosted at dreamhost, but I haven't used their email servers in years - I just route everything through gmail. I actually have a bunch of domains (with websites).
Gmail has an option that lets someone with custom domains send (and receive) email through gmail using the custom domain once Google confirms proper ownership of the domain (to prevent spammers and such). Gmail has a setting for "send email as" which allows gmail to be sent using a custom domain as the sender. I'm pretty sure Apple's old mobileme had this feature too, but I didn't use it.

How can I get audio to play from my TV when using hdmi cable? Video looks great, just no sound.

How can I get audio to play from my TV when using hdmi cable? Video looks great, just no sound.
I've tried plugging the hdmi into the TV directly and the receiver.
I get video every time. HBO to Go , Xfinity, ABC, Youtube, etc...
just no audio. Any suggestions?
I've tried starting the apps then plugging in the hdmi cable.
I never tried this before I upgraded to IOS 5.

Claudiamil-
I had not tried it with mine since upgrading to iOS 5, so I just did. I'm using a small Vizio HDTV. I did not try YouTube, but did try several videos and musical numbers. In all cases there was sound, including stereo when the source had it.
I assume you are getting sound from the iPad when the adapter is not connected, so the volume is not turned down. Dah*veed's suggestion to reset may be what you need.
Fred

My husband and I share an iTunes account. We both just got iPads. How can we program them to have different phone numbers for FaceTime and messages

My husband and I share an iTunes account. We both just got iPads. How can we program them to have different phone numbers for FaceTime and messages

Use different email address (gmail?) just for FaceTime and Messages.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
 Cheers, Tom

I have 2 ipods on same account( 2 different kids in household) how can I separate them into 2 different accounts?se

I have 2 ipods on same account( 2 different kids in household) how can I separate them into 2 different accounts?

There are actually a few methods for using more than one iPod on a single computer: How To Use Multiple iPods with One Computer
Just to summarise what's in the link above:
Method one is to have two Mac or Windows user accounts which by definition would give you two completely separate libraries.
Method two is to set your preferences so that either one or both iPods get updated with only certain playlists within one library. If you've had no success with this you can have a look through the guide on this page: Loading songs onto iPod automatically
Another option when using a single library is to set one or both of the iPods to manual update: Managing content manually on iPod
You can read about Windows user accounts here: Using Windows XP User Accounts

How can I stream audio from Apple TV 2 to Airport Express speakers.

how can I stream audio from Apple TV 2 to Airport Express speakers.
I have LCD projector on one wall and connected ATV to it via HDMI.
Speakers on the other wall and connected to APXpress.

To be honest the times we've wanted to have music from more than one set of speakers, I've usually used my mac's iTunes library and controlled it either from the mac or from my phone, since they're not really the times we have any TV on anyway. I've tested AirTunes from the Apple TV but can't recall whether it worked with content from a streaming library.
Now I've got something to do.

How can I transfer songs from two different itunes?

I want to transfer songs from my brother's itunes library to my shuffle, but when I plug it in his computer, a message saying that his library is not linked to my library (or something to that extent) and whether I would like to replace the songs. If I click yes, all my existing songs are replaced with HIS songs. If I click on NO, the Shuffle icon does not appear at all and I cannot transfer any of his songs to my shuffle. How can I transfer songs from two different computers into my shuffle without replacing any of my existing music?
Shuffle Windows XP
Windows XP

You'll have to setup your iPod to manual instead of automatic update (I'm not sure, though, if it works with the Shuffle as well).
Alexander.

How can i import tables from a different schema into the existing relational model... to add these tables in the existing model? plss help

how can i import tables from a different schema into the existing relational model... to add these tables in the existing relational/logical model? plss help
note; I already have the relational/logical model ready from one schema... and I need to add few more tables to this relational/logical model
can I import the same way as I did previously??
but even if I do the same how can I add it in the model?? as the logical model has already been engineered..
please help ...
thanks

Hi,
Before you start, you should probably take a backup copy of your design (the .dmd file and associated folder), in case the update does not work out as you had hoped.
You need to use Import > Data Dictionary again, to start the Data Dictionary Import Wizard.
In step 1 use a suitable database connection that can access the relevant table definitions.
In step 2 select the schema (or schemas) to import. The "Import to" field in the lower left part of the main panel allows you to select which existing Relational Model to import into (or to specify that a new Relational Model is to be created).
In step 3 select the tables to import. (Note that if there are an Foreign Key constraints between the new tables and any tables you had previously imported, you should also include the previous tables, otherwise the Foreign Key constraints will not be imported.)
After the import itself has completed, the "Compare Models" dialog is displayed. This shows the differences between the model being imported and the previous state of the model, and allows you to select which changes are to be applied.
Just selecting the Merge button should apply all the additions and changes in the new import.
Having updated your Relational Model, you can then update your Logical Model. To do this you repeat the "Engineer to Logical Model". This displays the "Engineer to Logical Model" dialog, which shows the changes which will be applied to the Logical Model, and allows you to select which changes are to be applied.
Just selecting the Engineer button should apply all the additions and changes.
I hope this helps you achieve what you want.
David

HT204053 My ipad stores my documents on iCloud. How can I find them from a different computer, as I used to do by using a memory stick on my old PC etc ?

My ipad stores my documents in iCloud. How can I find them from a different computer? I used to use a memory stick and could work on my documents on any computer and want to have a replacement system using documents created on my ipad - I can't use a memory stick with it.

How do you know that they are on iCloud, the iPad can (and does) save locally. If they are on iCloud they will be accessible via the application that created them (Pages, Numbers etc) and can be reached from any computer with iCloud access by logging to iCloud.com. But you did that and stated that they are not there, so what makes you think that they are?

How can you get audio for books on the kindle

how can you get audio for books on the kindle

The audio inputs on Macs are line level inputs and not mic inputs. You need a mic with a built in preamp (battery powered) or more conveniently a USB mic or bluetooth headset.

How can i get the Icons in the output of ALV?

Hi,
I am trying to get the Icons in my report output using ALVs.
i am adding the following line
 line_fieldcat-icon = 'ICON_GREEN_LIGHT'. in my field catalog for getting the respective Icon in the list. but the Icon is not getting displayed?
May i know whether the above specified line is correct or not? if not, how can i get the Icons in my output using ALVs?
Thanks and regards,
Ramesh.

Hi,
take idea from this code :
INCLUDE ICONs.
WRITE : / icon_green_light AS ICON.
WRITE : / icon_red_light AS ICON.
write : / icon_yellow_light AS ICON.
OR
add code as per steps below in your ALV report :
FIRST :
INCLUDE ICONs.
Second : in your internal table add :
icon type icon-id,
Third :
add this value in icon field for green light.
itab-icon = '@08@'.
append itab.
Fourth : display
is_fieldcat-tabname = 'IT_FINAL'.
is_fieldcat-fieldname = 'ICON'.
is_fieldcat-col_pos = '1'.
is_fieldcat-outputlen = '12'.
is_fieldcat-seltext_l = 'ICON'.
APPEND is_fieldcat TO it_fieldcat.
CLEAR is_fieldcat.
Reward points, if helpful,
Sandeep Kaushik
Message was edited by:
 Sandeep Kaushik
null

How can I output audio to a different output than video?

Similar Messages

Maybe you are looking for