How can I output up to 7 tracks simultaneously?

Hello esteemed GB community.
I have to create a little effect for an upcoming party. For this I need to output the following:
- at least 4 separate audio channels (stereo front and stereo rear)
- one mono combination of these four tracks (to drive a Light organ gizmo - makes the light flicker with the audio)
- and finally one separate track on which I will put pulses to trigger a relay for a fog machine.
Setting up these tracks in GB should be fairly straigth forward (although my GB experience is very limited I've done a fair amount of audio mixing in FCP - which I imagine is similar) but my question is, how can I output all these tracks so I can feed them to their respective recipients? This means to two stereo setups for audio (or would it be easier to do 5.1 Dolby - $$$ ?) and then to the light organ and to the relay trigger for the fogger.
I did a search for multitrack but most answers I found dealt mainly with input, not output. I imagine this will require some kinid of an external box, right?
Budget for this box is very limited, hopefully less than $200. Quality does not have to be very high although a good bass response will be important for the effect.
Thank you very much for any help.
Bo

Thanks for your help, HT. Would Logic be a better choice than ProTools LE for this? (I know next to nothing about them I must confess...)
I was just thinking, in the worst case scenario, I could just create the 6 audio tracks in GB, then output three stereo mp3 files (stereo front, stereo rear, 2 control tracks), dump each on a separate cheap mp3 player and get a controller that can remote start all of them at the same time...
Does anyone know of such a cheap mp3 player that can be remote started via a wire connection to a relay? Is there another forum that deals with this kind of issue?
Thanks again.
Bo

Similar Messages

How can I output text in a browser window in JAVA?

How can I output text in a browser window in JAVA?

"response.getWriter().print()" is the most common method when using servlets

When i try to upload a .mts file from my Sony camera to Premiere Pro CC it refuses to play the audio! Ofcourse i could convert every single clip but it takes tons of time. How can i make Pr play audio track properly?

When i try to upload a .mts file from my Sony camera to Premiere Pro CC it refuses to play the audio! Ofcourse i could convert every single clip but it takes tons of time. How can i make Pr play audio track properly?

Does it not play at all or cannot you get the audio in the timeline?
Did you copy the entire card to the hdd and then imported the file via the Media Browser?
Did you source patch the audio tracks?

How can i output the max average?

How can i output the max of the average?
i have this queries...
<cfquery datasource="Intranet" name="GroupStars">
        SELECT execoffice_status, employeedept, COUNT(*) as 'totalstars'
        FROM CSEReduxResponses
        WHERE execoffice_status = 1
        GROUP BY execoffice_status, employeedept
    </cfquery>
    <cfquery dbtype="query" name="GetTotalStars">
        SELECT *
        FROM GroupStars, GetDepartments
        WHERE GroupStars.employeedept = GetDepartments.csedept_id
    </cfquery>
<cfif GetTotalStars.RecordCount gt 0>
    <cfquery datasource="PhoneList" name="GetAllData">
        SELECT dept.csedept_id, COUNT(*) as 'totalcount'
        FROM employee, dept
        WHERE employee.dept_id = dept.dept_id
            AND employee.emp_status = 1
            AND dept.csedept_id is not null
        GROUP BY dept.csedept_id
    </cfquery>
    <cfquery dbtype="query" name="GetDepartmentTotalEmployeesCount">
        SELECT *
        FROM GetAllData, GetDepartments
        WHERE GetAllData.csedept_id = GetDepartments.csedept_id
    </cfquery>
<cfquery name="joinQuery" dbtype="query" >
SELECT *
FROM GetTotalStars
WHERE GetTotalStars.csedept_id = -1
</cfquery>
<cfset QueryAddRow(joinQuery)>
<cfquery name="GetUnion" dbtype="query" >
SELECT *
FROM GetDepartmentTotalEmployeesCount, GetTotalStars
WHERE GetDepartmentTotalEmployeesCount.csedept_id = GetTotalStars.csedept_id
UNION
SELECT GetDepartmentTotalEmployeesCount.*, joinQuery.*
FROM GetDepartmentTotalEmployeesCount, joinQuery
WHERE GetDepartmentTotalEmployeesCount.csedept_id NOT IN (#ValueList(GetTotalStars.csedept_id)#)
</cfquery>
<cfquery datasource="Intranet" name="GroupStarsGiven">
    SELECT execoffice_status, submitterdept, COUNT(*) as 'totalstarsgiven'
    FROM CSEReduxResponses
    WHERE execoffice_status = 1
    GROUP BY execoffice_status, submitterdept
</cfquery>
<cfquery dbtype="query" name="GetTotalStarsGiven">
    SELECT *
    FROM GroupStarsGiven, GetDepartments
    WHERE GroupStarsGiven.submitterdept = GetDepartments.csedept_id
</cfquery>
<cfquery name="joinQuery2" dbtype="query" >
SELECT *
FROM GetTotalStarsGiven
WHERE GetTotalStarsGiven.csedept_id = -1
</cfquery>
<cfset QueryAddRow(joinQuery2)>
<cfquery name="GetUnion2" dbtype="query" >
SELECT *
FROM GetUnion, GetTotalStarsGiven
WHERE GetUnion.csedept_id = GetTotalStarsGiven.csedept_id
UNION
SELECT GetUnion.*, joinQuery2.*
FROM GetUnion, joinQuery2
WHERE GetUnion.csedept_id NOT IN (#ValueList(GetTotalStarsGiven.csedept_id)#)
ORDER BY csedept_name ASC
</cfquery>
and this part is where i calculate the average, but i only get the average for each department, and from here i want to get the max of the average. how can i do that?
<td><div align="right"><cfif totalstars eq ''>–<cfelse><cfset avgstars = totalstars / totalcount>#DecimalFormat(avgstars)#</cfif></div></td>
thanks for your help

1) What is it doing instead?
2) Can you repost your code, but use code tags? If you repaste your formated code and place the tag [code] on top of your block of code and then paste [/code] on the bottom of your block, your posted code will retain its formating and be readable.
Good luck

How can I output RCA video?

How can I output RCA video from the headphone jack of my macbook pro? Is there any software to do this?

I can't broadcast with the built in iSight webcam... how would I zoom in or zoom out? or how would I pan? I've seem people doing it walking with their laptops but that's not an option for me... there's nothing wrong with my USB ports but that's neither an option to stream video because as far as I know through USB you can't connect video in apple operating systems ..you can for sure plug any video cam or photo camera through usb but as a drive to transfer data not as a live video camera... is by firewire an old interface developed by apple that you can connect all sorts of cameras to apple computers... unfortunately my new sony HDR-AX2000 camcorder doesn't have firewire output...
thanx

How can i do to separate many tracks of a video's stream?

How can i do to separate many tracks of a video's stream?

You can retrieve some example codes from sun's sample.
May be the rtp server example.
The file is separated into two tracks automatically.

How can I divide one big long track into several smaller ones?

I have many mp3"s I imported or downloaded in my Library of lectures, sermons and speeches.
How can I divide one big long track into several smaller ones?
Any input would be great.

lakergrl wrote:
How do I split one very long track into several tracks (audio journal split into each day)
http://www.bulletsandbones.com/GB/GBFAQ.html#exportsections
(Let the page FULLY load. The link to your answer is at the top of your screen)

How can one find and remove hidden tracking software on an iphone

How can one find and remove hidden tracking software on an iphone

When folks did not know that it was there, they assume that it is hidden. Even the EU and the US congress got all up in arms about it.

How can I output the alpha channel in Premiere elements 10

How can I output the alpha channel in Premiere elements 10. What format should I use?
Tried outputting to an AVI filet but the file did not contain an alpha channel that After Effects 5.5 would recognize.

Bill,
I hope you ordered 32 GB or more on that new computer After Effects 5.5 takes up as much as it can.
The Roto Brush tool is really a timesaver over ordinary Rotoscoping. Although, my problem now is: when I try to send a 1 min. And 11 second video from Adobe Premier Pro 5.5 two Adobe Media encoder 5.5, the process hangs in wait state in the Media Encoder. I have filed a request for help on the Media Encoder forum.
I know you will put your new computer to use in helping other people and for this I thank you.

How can I enable session(using url) tracking in home page

i am developing bidding application. How can I enable session(using url) tracking in home page ?
for example :
http://mydomine.com/index.jsp;jsessionid=4A38A4496F6862681DFD09CD6D648485.tomcat75
please help me.

Doubleposted. Please continue here: [http://forum.java.sun.com/thread.jspa?threadID=5308686&tstart=0]
In the future, do not use the back button to edit the message, but use the edit button instead. Otherwise you're reposting the form again. You should know that better as being a web developer.

How can I convert Itunes video albums tracks to ipod tracks

How can I convert Itunes video albums tracks to ipod tracks?

3pg is an odd format... That or I just never seen it before. :P
iTunes just ***** at converting videos. So far all videos I tried converting with iTunes have resulted in the same error you got.
You're better-off using 3rd party apps, and then copying to iTunes, and then copying to the iPod.
Unfortunately I don't know of any conversion programs for Windows.
If you by chance have a mac, this program works great: http://www.apple.com/downloads/macosx/video/flv2itunes.html
The mac version of Handbrake below works great, hopefully the Windows version does, too:
http://handbrake.fr/?article=download
When converting with handbrake, make sure to use the iPod preset for the out-put video.
Hope this helps a little.

How can I output a slideshow so that it fills 16:9 tv screen?

When I output a slideshow to a wmv file I want to burn the file in 16:9 format to play on HD widescreen TV. I cannot view it without bars on sides. How can I output so that slideshow will be border less?

Search for .prx files on your computer and then select them from the Slide Size drop down. e.g. C:\Program Files (x86)\Adobe\Elements 12 Organizer\Assets\locale\en_US\tv_profiles\12 - Widescreen Enhanced Definition.prx.
During the creation of the slide show you can still only work within a 4:3 portion of the screen, but selecting a 16:9 size will output without the vertical bars.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Hp photosmart 7525 paper width guide became loose. How can I put it back on track?

While adjusting my paper width guide it became loose. I have tried everything to reattach it. One part slides into its track, but the front part refuses to stay where it should. How can I put it back on track?

Hello @Pearlb12,
Thank you for visiting the HP Support Forums! I see the Paper Width Guide is loose on your HP Photosmart 7525 and you would like to put it back on the track.
I suggest contacting our technical support at 800-474-6836, as it is the hardware, you may need the piece replaced or printer. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

When copying (importing) a CD with multiple artists to itunes, how can I get all of the tracks to be on one album?

Wen copying (importing) a CD into itunes that has multiple artists or duets with a primary artist, how can I get the tracks to all appear on one album?

Generally all you need to do is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
tt2

How can I tell if someone is tracking me through my iPhone

I have an friend who seems to always know where I am. I think she's using the GPS in my iphone to determine where I am. On top of that, I have seen text messages I have sent from my iPhone to others pop up on her iPad as soon as they are sent. She seems to always know what is written in my emails...personal stuff like emails from my parents discussing my relative's death and subsiquent small inheritance I will be recieving in a private account. She can connect through my wireless and I leave my bluetooth on because I use it for my hands free when I'm talking on the phone. This stuff isn't limited to my Apple products (iPhone & MacBookPro), but also my Dell desktop. Obviously, I've changed my passwords but I think she can track those changes. Is there some tracking software that she could be using? If so, how can I find it and remove it? Thanks

Change your Apple ID password. And all your other accounts while you're at it. She doesn't need any tracking software if she knows your account login information.

How can I output up to 7 tracks simultaneously?

Similar Messages

Maybe you are looking for