How can I override pop-up windows for a specific site?
In Firefox for Mac and Internet Explorer on a PC, you can turn off pop windows, but authorize specific sites to open a pop-up window. Is there a work around in Safari? The simple on/off switch (command-shift-k) is not adequate. I'd like to use just one browser, instead of using one for general surfing, and another for sites I log into that open various pop ups as I navigate.
Safari is fast, but at a functional cost.
Adblock keeps popping up as a suspect in Safari crash logs, so I'm a little nervous about it. Glims seems to have a better rep for Safari-friendliness and I believe it offers selective ad blocking:
Glims for Safari | www.MacHangout.com
You can also try the Camino. browser, From the Mozilla crew, it is Mac-only and much leaner and faster than FireFox. The interface is very close to Safari, unlike FireFox's rather Windows-centric approach. You can selectively block or allow both cookies and pop-ups. It's my backup browser and my wife's primary browser.
Similar Messages
-
hello,
How can i upload two different logos for 2 sub sites [which falls under one super site ] in share point 2013 ?
thanks,
JayHi,
I understand that it applied first logo to all other sub sites.
Please make sure that you change the logos in the subsites.
If we change the logo in the root site, the logos in the subsites will be changed at the same time.
However, we can change the logo in the subsites separately.
We can go to a subsite, click the Site Sitting-> Look and Feel-> Title, description, and logo->Insert Logo->select a picture, then it will has a different logo than the root site.
Then go to the other subsite, click the Site Sitting-> Look and Feel-> Title, description, and logo->Insert Logo-> select another picture, then it will has a different logo that the first subsite.
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
How to Suppress the POP UP window for Print out Device
Hi All,
I have One ALV Grid report and in this report I want to SUBMIT another report which, when executes gives the POP UP window for Printer Device and sends the output to that device. if we give LOCL, sends output to Spool.
So I want to Suppress that POP UP Window and by default that POP UP window should take 'LOCL' as Printer Device.
Thanks in advance,
Helpful answer get awareded.On the submit command is a spool parameters option.
The addition WITHOUT SPOOL DYNPRO suppresses the print dialog box that is displayed as standard when you use the addition TO SAP-SPOOL.
The addition SPOOL PARAMETERS is used to transfer the print parameters in a pri_params structure that belongs to the data type PRI_PARAMS from the ABAP Dictionary.
PRI_PARAMS-PDEST specificies the output device. -
Can not keep pop up window to install adobe flash player. will not allow or allow. what's going on?
What is your operating system & version?
What is your web browser?
Please post a screenshot of that pop-up window.
[topic moved to Flash Player forum] -
How to use one pop up window for multiple buttons and input fields?
Hi Experts,
I have created a pop up window that will be opened from multiple buttons in the same view. There are input fields that the data will be populated from a pop up window. How can I set up which button that a pop up window is opened from? I also would like to populate the data from a pop up window to the input field next to a clicked button. There are 6 buttons and 6 input fields that share the same pop up window. I would very appreciate your responses.
Thank you,
DonHi,
Try creating 2 context attributes, one in your component controller and the other in the pop-up view. Bind the attribute of pop-up view to the component controller attribute.
In the main view, on click of every button set a unique code in the controller's context which helps you in identifying the button clicked. Since u have created a binding to the pop-up view attribute the value flows from the controller.
In the init method of your pop-up view, check the value of the attribute and based on that display which ever UI elements are required.
Eg:
On Button 1 click set value "B1", Button 2 value "B2" etc. In the init() of pop-up view u can check the values and perform the required operation:
if(("B1").wdContext().currentContextElement().getButtonIdentifier()){
else...{
Hope this helps you.
Regards,
Poojith MV -
How can I override the startup window position?
Can I override a compiled labview 7 app with ini settings, command line options, via a registry edit, or other option?
Thanks,
MikeHello Mike
Besides saving the vi in a position, you also have a property node to determine window position at startup app.
Values can be fix, calculated from monitor specs, etc.
See attached doc.
Hope it helps
Alipio
"Qod natura non dat, Salmantica non praestat"
Attachments:
origin.doc 35 KB -
How can we create a popup window for confirmation while clicking of button
HI Friends,
I am creating a application, In which I want to create a popup window for confirmation on clicking of a button.
I also need two buttons on popup window i.e. 'Yes' & 'No'.
On yes i want to perform some operation and on No i want to cancel that operation.Hi Narendra,
try using the following code in ONACTION of ur button for popup :
* Popup
* Generate Popup
DATA lo_window_manager TYPE REF TO if_wd_window_manager.
DATA lo_api_component TYPE REF TO if_wd_component.
DATA lo_window TYPE REF TO if_wd_window.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
lo_window = lo_window_manager->create_window(
window_name = 'W_POPUP'
window_position = if_wd_window=>co_center
message_display_mode = if_wd_window=>co_msg_display_mode_selected
button_kind = if_wd_window=>co_buttons_yesno
message_type = if_wd_window=>co_msg_type_none
default_button = if_wd_window=>co_button_yes
DATA: l_api TYPE REF TO if_wd_view_controller.
l_api = wd_this->wd_get_api( ).
" subscribe action for Ok button
lo_window->subscribe_to_button_event(
button = if_wd_window=>co_button_yes
action_name = 'OK_POPUP'
action_view = l_api
is_default_button = abap_true ).
lo_window->open( ).
regds,
amit -
How can i refresh an SSL certificate for a specific page?
i am trying to access my electronic training jacket on Navy Knowledge Online to check the status of my security clearance. the ETJ page requires an SSL certificate. when i initially loaded the page the message window popped up prompting me to add the security exception and get the certificate. i got the certificate and continued to load the page but it came up with HTTP error 403.7 saying that i didn't have the certificate i needed. for some reason NKO isn't recognizing the certificate i got so i need to clear that certificate and get a new one that hopefully the server will recognize. how can i do this?
You can try to remove that certificate here:
Edit > Preferences > Advanced > Encryption: Certificates > View Certificates -
How can i display pop up window
My requirement is, I have 4 columns in my report.
Dept #, Dept Name , Location , Emp Name
We have so many employees in one department. So we have to display first two employees names and if user move arrow on first two employees then one pop up box should appear with list of all employee names with in that department.
Can I achieve this one with OBIEE?
Please help me.
Thanks in advance for your help.check this one...
Pop up (hover) text -
How can I open a new window for a (calculated) PDF?
Hi,
I have a BSP application with MVC. The start page is a HTML/HTMLB page with some buttons. If you click on the buttons, you get a PDF document in the same browser window. I generated the PDF over smart forms from table/Cluster data.
I call the controller in the OnInputProcessing event handler of the page and give it the parameters.
The problem: if you are on the PDF you cannot come back to the start page. I think, it is better, if the PDF gets a new window. The user can open on this way many PDF docs.
I tryed with navigation->next_page(...) or call_view etc. but all this dosn't work. Only the PDF will be show and in the same window!
Do I have to separe the application in two applications and use the CALL_APPLICATION method?
Or does anyone know a better way?
Thank you!
Regards
PatriziaHI Thomas,
I send you a fragment of the code. It does work well.
Thank you for the links!
The data are read, convert into a otf, then in pdf
CALL METHOD me->print_otf_2_pdf
EXPORTING
otfdata = model->otf
response = response
navigation = navigation.
METHOD print_otf_2_pdf .
generated result: PDF format
DATA: l_pdf_xstring TYPE xstring,
linetab TYPE tlinetab,
l_pdf_len TYPE i.
Conversion of output format OTF into PDF format
now convert the final document (OTF format) into PDF format
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
MAX_LINEWIDTH = 132
ARCHIVE_INDEX = ' '
COPYNUMBER = 0
IMPORTING
bin_filesize = l_pdf_len
bin_file = l_pdf_xstring " binary file
TABLES
otf = otfdata
lines = linetab
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
err_bad_otf = 4
OTHERS = 5
IF sy-subrc <> 0.
ENDIF.
CALL METHOD me->open_pdf
EXPORTING
pdf_xstring = l_pdf_xstring
pdf_len = l_pdf_len.
ENDMETHOD.
METHOD open_pdf .
DATA: l_pdf_len TYPE i,
runtime type ref to if_bsp_runtime,
filename type string,
guid type guid_32.
response->set_header_field( name = 'content-type'
value = 'application/pdf' ).
response->set_header_field(
name = 'cache-control'
value = 'max-age=0' ).
l_pdf_len = XSTRLEN( pdf_xstring ).
response->set_data( data = pdf_xstring
length = l_pdf_len ).
navigation->response_complete( ).
ENDMETHOD.
Regards
Patrizia -
How can I search the filter log for a specific string?
I have messages appearing in a sub folder named "2014". The main folder is called "Archives" . I do not know how they ended up there. I read through all my filters, but see nothing that sends messages to that folder. I scroll through the filter log and do not see the message subjects that end up in that folder.
Is there a way to use something like <edit><find> to look for a string?A selected message will be moved to the Archives folder if you press the "A" key. Some people find this annoying, but it's possible to disable this, and other, keystrokes. http://gsfn.us/t/40hkd
-
Pop up window for a single field details..
How to display a pop up window for details of one field by click?
hi,
chk this.
report zsha.
type-pools: slis.
data: begin of iku occurs 0,
check type c,
kunnr type kna1-kunnr,
name1 type kna1-name1,
end of iku.
data: ifldc type slis_t_fieldcat_alv .
data: xfldc type slis_fieldcat_alv .
select kunnr name1 into corresponding fields of table iku
from kna1 up to 10 rows.
clear xfldc.
xfldc-reptext_ddic = 'Customer'.
xfldc-fieldname = 'KUNNR'.
xfldc-tabname = 'IKU'.
xfldc-outputlen = '12'.
append xfldc to ifldc.
clear xfldc.
xfldc-reptext_ddic = 'Customer Name'.
xfldc-fieldname = 'NAME1'.
xfldc-tabname = 'IKU'.
xfldc-outputlen = '30'.
append xfldc to ifldc.
call function 'REUSE_ALV_POPUP_TO_SELECT'
exporting
I_TITLE = 'This is the message here'
* i_checkbox_fieldname = 'CHECK'
i_tabname = 'IKU'
it_fieldcat = ifldc
tables
t_outtab = iku
exceptions
program_error = 1
others = 2.
check sy-subrc = 0.
popup_with_table_display.
Usage:
CALL FUNCTION 'POPUP_WITH_TABLE_DISPLAY'
EXPORTING ENDPOS_COL = 41
ENDPOS_ROW = 10
STARTPOS_COL = 1
STARTPOS_ROW = 1
TITLETEXT = TEXT-202
IMPORTING CHOISE = SEL_ROW
TABLES VALUETAB = ITAB
EXCEPTIONS OTHERS = 99.
IF SY-SUBRC EQ 0 AND SEL_ROW > 0.
READ TABLE ITAB INDEX SEL_ROW.
REF_NAME = ITAB-TABNAME.
ELSE.
REF_NAME = SPACE.
ENDIF.
Regards,
Anver -
ITunes 11: Pop-up windows for quick access on iTunes Store?
Anybody know what happend or how to get back pop-up windows for quick access on iTunes 11?
Please see link below for I mean:
itunes-store-adds-pop-up-windows-for-quick-access-to-content-details-and-preview s
Thanks.Sounds like some security software is freaking out, because it's not been set up properly for iTunes.
-
How can I shut off all of the pop-up windows for all the Firefox updates?
How can I shut off all of the pop-up windows for all the Firefox and Thunderbird updates?
Apparently now Mozilla creates new versions of their browser and email apps every two weeks instead of just creating updates... I'm tired of all of the pop-up requests for these constant installation requests and all the problems that the new version installations create... I just want to use the software and be left alone.
I can't find a way to make Firefox and Thunderbird stop with the pop-up requests for new installations... is there a way to do this or has Mozilla just got it rigged so one can't just use the software without re-installing a new version every two weeks and running in to new plugin issues and missing features every time?
Help!
Thanks,
numetroIs it possible that her computer is infected with malware.
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
*AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware:<br>http://www.superantispyware.com/
*Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender:<br>http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked -
How to remove the pop-up window ''Wireless Radio Status" for t430s
Hi, I have owned my t430s for now about 2 years without any major complaints recently I've had to use the fn + f5 function quite frequently, because of my poor internet connection. so that way i can reset which signal I want to choose because the default signal I am connected to is not mine. My problem is similar to what is posted here: https://forums.lenovo.com/t5/X-Series-Tablet-and-Helix/how-to-remove-the-pop-up-window-Wireless-Radio-Status/td-p/1191059 I really want to get rid of the pop up for this feature, I've tried to follow what the other thread user's have done and try out their solutions but it does not work for my t430s i tried changing the pmev thing to what was posted in the thread. Can anyone help me? Thanks!
I already tried that as mentioned in my original post, it doesn't work. I still get the pop up message: this is me pressing fn + f5
Maybe you are looking for
-
Azure SQL Reporting - Installing Fonts - Status after 10/31/14
As Azure is moving reporting service to VM. Is it possible to get fonts installed on SQL Reporting with out migrating to VM until the 2015 deadline? IF so how do we get the fonts onto the SQL reporting environment? Thanks
-
Problem accessing web service, error 2032 Stream Error
I'm building a small flex app hat uses two web services provided by the same coldfusion CFC. I've verified that I can successfully access the web services via HTTP, and one of the web services actually does work when called. Both return structures th
-
hello is there a chance, with out UDF, to translate Date? the translation is for example from: may 07, 2009 to 2009/05/07? or any other games beween words and numbers? is there a way to do it with the date functions or only with the value mapping? Th
-
I've been mailed some pictures in negative form - how do I convert to positives
I've been mailed some pictures in negative form - how do I convert to positives
-
Has anyone had this problem? what should I do ?