How can i package my project to exe

dear members
my project is composed of 30 fmx file in addition to
60 rdf file
my question is
is it possible to make my project executable package (setup file that runs under winows98 or xp)
and how?

Use the free Burn
http://www.bestmacsoftware.org/

Similar Messages

  • How can you open a project file backup if the main project won't load?

    This has only started happening in the last couple of weeks. I'm on Logic 10.0.7, OSX 10.8.5. On one particular project, it will be loading seemingly normally, then it just disappears with no crash log, nothing.
    Presumably there is some sort of corruption in the project file.
    In the old pre package days, you would just go to the project file backups folder and pick a previous one. Bingo, you have only lost a little bit of work.
    Now when I show package contents, the project file backups folder has project data files that won't open logic, and are invisible until you have logic open. Which I can't do.
    Rue the day I selected the package option rather than folder.
    Any suggestions?
    Or to put the question another way, how can I convert the project data in the project file backups folder to a file that Logic can recognise and open?

    Having his install the trial is the way to go. Working between AI versions is a pain and as you are finding out almost impossible with 5 versions between the collaborators.

  • How can i create a project with my exisiting java code

    Hi All,
    I have a source code of one project and i want to execute this in jdeveloper 10.1.3.1.0 version.
    can u please suggest me how can i execute that project
    its using struts and ejb's
    i need clear steps of this.
    Thanks in Advance.
    Regards,
    588872

    Under file->new->Projects you'll find two options that are relevant to you:
    One is called project from WAR file - this will allow you to point to a project that has been packaged as a WAR and will create a JDeveloper project for it.
    The other option is called "Project from existing source" this will allow you to point to your existing code directory and will create the JDeveloper project for this.
    After you created the project, you might want to do a bit of tweaking under the project properties->content and sub categories for Web content, resources etc...
    And you might also need to add any missing JAR files you are depending on to the libraries node of your project properties.

  • How can i use the project code instead of project xml?

    hello
    i use the sessionbean+toplink structure,after i finish the o-r mapping by using the mapping work bench,i generate the project xml file,then in the "session.xml" file,i refer to the project xml,then i can use it from sessionbean.
    i hear that if i use the project code instead of project xml file,it will be more performant,is that true?
    otherwise,how can i use the project code instead of project xml file?i mean, in "session.xml", i can use the "<project-xml>" tag to refer to the project xml file,then in my session bean,i get the server session by read the "session.xml" file.but if i use the project code,how can i refer it from the "session.xml"?the examples that come with the toplink installation only tell me how can i use the project xml file within the session bean,it don't give me any clue about using the project code in the sesion bean,who can give me a step-by-step instruction and code snippet?
    thank you very much?

    There is a slight performance gain during session load at startup but there is no difference at runtime. The choice of which to use is dependent upon you build process. Whether it is easier to submit a new version of the class into the comile build process vs an XML file. In most cases it is just a preference of the development team.
    When you use the project-class you'll need to generate the source code and compile it into your system. Typically it is packaged with the persistent classes. You may need to configure your environment so that the class-loaders have access to these classes (same for the XML case).
    When using the project-class you simply replace the project-xml entry like this:
    <project-class>oracle.toplink.demos.employee.relational.EmployeeProject</project-class>
    The DTD for the session.xml file is found at <TOPLINK_HOME>\core\sessions_4_5.dtd. It is also in the documentation at:
    http://otn.oracle.com/docs/products/ias/doc_library/90200doc_otn/toplink.903/b10064/a-sessio.htm#634246
    Doug Clarke
    Product Manager
    Oracle9iAS TopLink

  • Hi! How can I continue my project in iMovie 10.0.1 in another Macbook?

    Hi! How can I continue my project already started in iMovie 10.0.1, in another Macbook?

    You need to make sure first that all the media is in your library and it does not contain links to external media that will break when you move your library.  You do this by choosing selecting the library in the libraries pane and choosing File - Consolidate Library Media.
    If your library is on an external drive you can simply reconnect that drive to the other mac; otherwise you will have to copy the library package (it looks like a file with the extension .imovielibrary) to the other mac.   Launch iMovie 10.   The first time iMovie won't know where the library is so you will have to choose File - Open Library - Other and navigate to the library location. 

  • How can I open a project made in 2000 on Final Cut Pro to migrate it to a new version?

    how can I open a project made in late 2000 on Final Cut Pro to migrate it to a new version to finish editing it? files, timeline and unfinished edit are all stored on hard drive since early 2001, with all the original miniDV tapes still in hand

    Do you still have legacy FCP? If you not you need to find someone who will open the project in FCP6.0.6 or later. Export an XML file of the project. Use 7toX to convert it to an XML format that works with FCPX. Import the converted XML file to FCP.

  • How can I export a project on an external drive in the latest version of iMovie?

    Before the latest release of iMovie I easily managed to export a project on an external usb drive and re-import such project on a different Mac... In the latest iMovie version, however, I cannot see my drive any more..
    So, how can I export a project on an external drive in the latest version of iMovie?
    Thank you in advance

    I'm not sure this is the best way, but you could create a new iMovie Library, move your project to that Library, then close the library. Then move the Library to your USB drive. Then, on the other Mac, in iMovie open the Library.

  • I have no problems copying iMovie Events from one Mac to another, however, how can I copy iMovie Projects from one Mac to another?

    I have no problems copying iMovie Events from one Mac to another, however, how can I copy iMovie Projects from one Mac to another?  Any help will be appreciated.  Thank you.

    This should give you some good insight, I'd probably store them on an External HD on the old machine and then just drag and drop to the new machine.
    https://discussions.apple.com/docs/DOC-4141

  • How can I move my project from external hard drive to my macbook pro?

    How can I move my project from external hard drive to my macbook pro? every time I try to do some editing, the sequence is very slow, thanks in advance

    Try here...
    Setting-up a new Mac from an old one, its backups, or a PC

  • How can I share a project specific calendar I created on Entourage 2008 ?

    How can I share a project specific calendar I created on Entourage 2008 without showing my personal calendar? I created a project specific calendar using Entourage 2008 for Mac. I want to add someone that uses Outlook from a PC. We are in the same exchange network.  I have added this person in under the sharing tab, but don't see a way to invite her to view it, and it does not appear on her Outlook list of shared calendars. I was able to invite her to view my main calendar, but not the project specific one. Any suggestions?

    http://www.microsoft.com/mac/support

  • How can I import an project .imoviemobile file to imovie 10.0.6 on my mac book for further processing

    How can I import an project .imoviemobile file to imovie 10.0.6 on my mac book for further processing?

    You can't.  (http://www.macworld.com/article/2057972/imovie-for-ios-projects-no-longer-work-o n-the-mac.html)
    Geoff.

  • How can I publish a project so that the link to embedded flv is not lost?

    When publishing an Adobe Captivate 3 project, the embedded flv file does not play.
    How can I publish a project so that the link to embedded flv is not lost?

    I am not really sure, if I understand you right. But try this:
    Don’t place a picture, but draw a box and use the "Fill" command to put a picture into it.
    (Don’t click onto the color swatch, but onto the blue link "Fill".)
    In this case responsivness should work.

  • I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?

    I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?
    I have a sony handicam and I imported the clips to iMovie and they lost quality and converted the audio to stereo. I want to import the project to final cut X and import the AVCHD in 1080p and surround sound and export the movie in bluray. Can I relink the clips without editing everything again?
    thanks!

    Only photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad - either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view.
    Photos that were synced from a computer are deleted by moving/removing/de-selecting them from where they were synced from and then re-syncing. If you want to remove them all then normally you could just sync an empty folder (in terms of photos) to the iPad, but as you don't want to sync at the moment you can't do that.
    You can reset the iPad back to factory settings and start from scratch with it : Settings > General > Reset > Erase All Content And Settings

  • How can I include merged projects in the printed documentation?

    I have a master project with several merged projects. This works splendid with online documentation, but when I am asked to provide a printed version, it seems I have to create separate documents for each merged project.
    Is there any setting or fix that enables print also of merged projects and topics when I create printed documentation?
    Pretty please with sugar on top :-)

    Hm - there is a contract with the customer, saying that he wants documentation both as word and pdf, and as we now aim at only writing online documentation, these tasks create extra work, as we are delivering updates each month
    But yes - two beasts, where only chm is actually needed we think.
    -Tone
    Date: Tue, 3 May 2011 06:53:04 -0600
    From: [email protected]
    To: [email protected]
    Subject: How can I include merged projects in the printed documentation?
    Hi there
    I'm a bit curious as to the reasoning behind your "persuation process for using chm-files only".
    CHM files and printed documentation are two entirely different beasts.
    Cheers... Rick
    | http://www.robowizard.com/pc.gif | Helpful and Handy Links
    http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
    http://www.gooberguides.com/ProductPages/RoboHelp/RoboHelp82Day.htm
    http://www.ShowMeSolutions.biz
    http://sorcererstone.wordpress.com/
    http://www.gooberguides.com |
    >

  • How can I split a project. In iPhoto one could choose that option from the Events dropdown on the toolbar

    How can I split a project? In iPhoto I could use the Event tab in the tool bar and there was an option to split the event but I can't find it on Apeture 3.

    Hi Wayne.  Aperture and iPhoto differ in many -- perhaps all -- ways.  They were designed (afaict) with radically different users in mind.
    To move images into a new Project, select them, then execute "File→New→Project" and check "Move selected items to new project".

Maybe you are looking for