How can I partition an already in use external?

I have a 250gb external that I am using with Time Machine. Its still got plenty of space left, >80gb, and I'd like to see if I can partition it without losing what I already have. I know I can save files on the same disk without having to partition it but I would like to partition it anyways. I got bout 5gb of free space left on my internal HD and I wanna put my videos on the external. As long as I don't need any paid third party software I will do it. So, can disk utility do this? Or is there a way to do this?

You can probably do this. See item #6 in the Frequently Asked Questions post at the top of this forum.
Note that while you can have TM back this partition up along with your internal HD, it will send you a warning, reminding you that it really isn't a good idea. To have reasonably-secure data, you need (at least) two separate copies of everything important in two separate places. Don't trust both your originals and backups to the same physical hard drive -- when it fails (and it will, sooner or later), you risk losing both copies.
If your videos are fairly static, consider archiving them to DVDs.
And/or, get a separate external HD for them, and let TM back up both your internal HD and the new external.

Similar Messages

MBP Late 2010, How can I install Win7 Boot Camp using External Optical Driv

Hello:
I have a new MBP purchased in February. It's not the 2011 model. I replaced the Optical drive with an SSD drive and put the optical drive in an external enclosure. The Optical drive works great, reads, writes, etc. My Windows 7, Pro 64bit DVD works also, tested on a PC.
I use the Boot Camp assistant to create a partition. It them reboots and never starts up from the optical drive. I get an Apple logo alternating with a stop sign.
I have got back to OS X by starting with the Option key and choosing my OS X volume.
I tried booting to the DVD by using the option key, that did not work. I then choose the EFI option which allowed me to hit any key and appeared to boot from the external optical drive. Windows setup screen came up and I hit enter to start the file loading process. It eventually stopped when the progress bar was all the way across the screen. Then nothing.
Questions {Please give definitive answers, not guesses, thanks :)}
1) Is it possible to setup a boot camp Windows installation without an internal optical drive? Yes/No.
2) If yes, how?
3) I see the rEFIt utility has helped some but I read mixed reports. Will this help me boot and run Windows setup from an external optical drive? I don't want to install it if it's not known to be a certain fix.
4) Is my only options to reinstall the optical drive?
I chatted to OWC the vendor that sells the bracket. They had no idea how to install a Windows BC partition without an internal drive.
I am seriously discouraged by what seems to be Apple wanting to control everything. I had a Mac Pro and Air book in my future but now, it's on hold.
Thanks in advance,
Kevin

I tried what you are doing with a 2007 MBP, and could not get any Windows CD s to boot from an external optical drive, firewire or USB.
I think this is fundamental to Windows which won't boot from an external USB drive either even on a Windows machine (although I believe there may be complex ways of achieving this). I don't think this is Apple trying to control the world.
I ended up taking the MCE Optibay out and putting the original optical drive back in.
Just possible that something has changed between a 2007 MBP and 2010 MBP, but I doubt it.
If you want the second internal HD, you have two options:-
1. Put the Apple optical back in, install Windows, then take out the optical and refit the SSD. The external optical will still be able to install windows apps and data etc, just not boot any windows install CDs or utilities (like Paragon rescue disks). You will not be able to do a Windows repair install without refitting the optical.
2. Parallels, which has come a long way in the last two years. I am 99% certain that Parallels will install from an external optical.
Message was edited by: Mike Boreham
Message was edited by: Mike Boreham
Message was edited by: Mike Boreham

How can I open a new page (using "Pages") when I already have another page open? It just keeps reverting to the page I have opened already and won't let me open another one?

How can I open a new page (using "Pages") when I already have another page open? It just keeps reverting to the page I have opened already and won't let me open another one?

To make a new document, go to File > New From Template chooser and choose the type of document you wish to create.
To add a new page to an existing document go to Insert > Sections > Blank.

How can you add a where clause using "OR" with applied ViewCriteria?

[JDeveloper 10.1.3 SU4]
[JHeadstart 10.1.3 build 78]
I am using JHeadstart, but have a question probably more in the ADF area. On the JHeadstart forum I asked:
"I am overriding JhsApplicationModule's advancedSearch in order to be able to search in childtables. I created transient attributes, display those in advanced search and in the overridden method I check if any of these are filled by the user and create a where clause like 'EXISTS (SELECT 1 FROM <childtable> WHERE <column in childtable> = <column in EO's table> AND <another column in childtable> LIKE '<value supplied by user>)'. I add this whereclause using ViewObject.setWhereClause.
So far so good and it works. However, if the user selects 'Result matches any criteria', combining setWhereClause and the normal advancedSearch QueryByExample implementation using ViewCriteriaRow do not provide the desired result, since the ViewCriteria and the setWhereClause are AND-ed together, which is fine if the user selects the (default) "Results match all criteria" (everything is AND-ed) but not the "Result matches any criteria", since then every criterium is OR-ed together, except for the setwhereclause criteria and the set of ViewCriteriaRows, they are AND-ed.
I looked if I could specify that a WhereClause will be OR-ed to existing applied ViewCriteria, but no luck. Do I have to rewrite also advancedSearch's ViewCriteria implementation and write an entire setWhereClause implementation to be able to "OR" every criterium? Or any other suggestions? Can I look at the entire Where clause and rewrite it (after applyCriteria and setWhereClause are called on the VO)?
Toine"
Sandra Muller (JHeadstart Team) told me today: "This sounds like a JDeveloper/ADF issue that is not related to JHeadstart. The question is: how can you add a where clause using "OR" if there are already one or more ViewCriteria applied?
To simplify the test case, you could create a simple ADF BC test client class in a test Model project without JHeadstart (in the test class, use bc4jclient + Ctrl-Enter), in which you first apply a few ViewCriteriaRows to a View Object and also add a where clause.
Can you please log a TAR at MetaLink ( http://metalink.oracle.com/ ), or ask this question at the JDeveloper forum at http://otn.oracle.com/discussionforums/jdev.html ? (This what I am doing now ;-))
Thanks,
Sandra Muller
JHeadstart Team
Oracle Consulting"
Anyone knowing the answer or am I asking for an enhancement?
Toine

Hi,
Can you SET your whereclause as follows ?
('Y' = <isAnd>
and EXISTS (SELECT 1 FROM <childtable> WHERE <column in childtable> = <column in EO's table> AND <another column in childtable> LIKE '<value supplied by user>))
OR ('N' = <isAnd>
AND EXISTS (SELECT 1 FROM <childtable> WHERE <column in childtable> = <column in EO's table> OR <another column in childtable> LIKE '<value supplied by user>))
)

Than how can i get java class by using it's class file?

Hi
After compilation of a java program, it creates a class file.
After getting class file suppose class file has been deleted.
Than how can i get java class by using it's class file?
Thanks in advance.

get a decompiler and run your class file through it--I'll assume you want the source code back and that you are not trying to recover a missing class file by attempting to use the class file that is missing--if it's missing, then I've not a clue on how to get it back by using what is already missing.
BTW: many of your compilers have source control--if it does, just restore your missing file.

How can I install Windows 8.1 using a USB Pen Drive in Late 2011 Macbook Pro with DVD R/W given.

How can I install Windows 8.1 using a USB Pen Drive in Late 2011 Macbook Pro with DVD R/W given.
I have Boot Camp 5.1.2 (497) and there is no option for installing using USB. I have downloaded an image of Windows 8.1 already.
I can't install using DVD R/W because it's not working.
Please help me.
Thank you.

unlocked by myself
thanks

I bought 2nd hand iPhone and was linked with previous owner. I want to contact him but i didn't get any address of him. How can iget his/her email address using that iphone IMEI or you know any idea... Please reply if you know solution .....

I bought 2nd hand iPhone and was linked with previous owner. I want to contact him but i didn't get any address of him. How can iget his/her email address using that iphone IMEI or you know any idea... Please reply if you know solution .....

There is no solution here and you should already have known this as you replied to a thread all about this a few up from your own post and this stated the postition quite clearly and the question was answered.
Why do you ask the same question again? The first answer is not going to change just because you don't like it!!

How can i rename a jar file using only java code

i have tried everything i can think of to accomplish this but nothing works.

ghostbust555 wrote:
In case you geniuses haven't realized I said I tried everything I can think of not that I tried everything. So help or shut up I realize that I didn't try everything but if you can't figure it out either DO NOT POST.
And the question is how can i rename a jar file using java code? As it says in the title. Read.I would tell you to use the File.renameTo method, but surely that would have been obvious, and you would have tried it already? But maybe you didn't. You were kind of lacking in details in what you tried.
And yes, I am a genius. Just don't confuse "genius" with "mind-reader".

How can I create a Online Store using Muse?

How can I create a Online Store using Muse?
I have been looking around for solutions but I can't find one.
I was just hoping that someone else might have known of a way.
Thanks!

Since you can access the Alpha File Manager it means the option to "Enable online content editing (incompatible with Muse)" is ticked up under your profile details. With this enabled you can create Web Forms under Site Manager. Once you create the contact form open the Alpha File Manager (AFM), select the page where you want to insert this and choose the Web Forms from the right hand column. On the pop-up window select the web form to insert and click Insert.
Regarding the upgrade, as long as the site is in trial mode you can choose any plan for the site, see my answer #7. Create a new trial site, choose the link to the new trial site created from PP and publish your site there for testing purposes so you will have ecommerce included and available for you to try out.
If things go well you can request an upgrade to your current site to have the ecommerce included (the only situation in which this upgrade won't be available is when the site is published on one of the 5 sites received with the CCM subscription, they are webBasics and cannot be upgraded: http://www.adobe.com/products/creativecloud/publish-anywhere.html under "Publish websites" section, and the option will be to create the site from partner portal and publish the content from Muse)
At this moment indeed there's little documentation on how to integrate the two but this is because Muse is just not ready to take advantage of BC capabilities. It was never intended for CMS features of BC to be available in version 1 of Muse. This has already been mentioned a few times (one relevant example: http://forums.adobe.com/message/4355214#4355214#4355214)
Regards,
Cristian

We have a large family, 5 kids and two adults all with iPads, iPhones, Mac Books, Servers.... How can we combine our purchases to use on all our devices. We have two Apple ID's and sometimes buy multiple copies because of how we are limited...

We have a large family, 5 kids and two adults all with iPads, iPhones, Mac Books, Servers.... How can we combine our purchases to use on all our devices. We have two Apple ID's and sometimes buy multiple copies because of how we are limited...

Hello Halfback71,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Frequently asked questions about Apple ID
http://support.apple.com/kb/ht5622
I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
If you are wondering how using multiple Apple IDs relate to iCloud, see Apple IDs and iCloud.
Best of luck,
Mario

How can i create multiple accounts but use the same itunes?

how can i create multiple accounts but use the same itunes?

Hi iCloud is Making Me Go Crazy,
You will need to create a new Apple ID for your GameCenter and iCloud services. You can continue to use the current Apple ID you share with your Mom for access to iTunes Store purchases if you wish.
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
Frequently asked questions about Apple ID
http://support.apple.com/kb/HT5622
Cheers,
- Judy

How can I change excel column header using Labile.

Dear Experts,
                      How can i change excel column header using LabVIEW.
Thanks for any and all help!
M.S.Sivaraj.
Sivaraj M.S
CLD

As I said in my previous post, column headers in Excel are merely row 1 cells. May be I missing something here, so please be more explicit with your question.
I guess you are using the Excel Report tools, and you want to modify an existing sheet. From my limited experience with the Excel Report tools, it is not possible to open an existing woorkbook (except as template...), so the answer to your question should be "Forget it"...
The work around is to use the example I pointed for you before, and either to write the whole new colum headers as a string array, starting in A1, or to write a single string to a given cell in row 1.
Hope this helps
Chilly Charly    (aka CC)
         E-List Master - Kudos glutton - Press the yellow button on the left...

I want to download an audiobook, but my daughter has a giftcard credit on the account. How can I download my audiobook without using the money from her giftcard?

I want to download an audiobook, but my daughter has a gift card on the account. How can I download my audiobook without using the money from her gift card?

go directly to your ibook app. and you're going to find it. it's only with ibooks app.
best
Olivier
<Edited by Host>

How can we get ADFSecurity work when used in OC4J, OID and OAM?

I am getting error in http server log "mod_oc4j: Response status=499 and reason=Oracle SSO, but failed to get mod_osso global context."
But I am not using Oracle SSO and my client doesn't want to use it either, I am using OAM SSO(CoreIDSSO) in my configuration. Please read the details below.
I am using ADFSecurity in an app that is protected by OAM. To migrate ADFSecurity permissions from
system-jazn-data.xml to OID, I used JAZNMigrationTool to populate OID with Grantees and Permissions. OAM gives login page, and authentication works fine.
But ADFSecurity is not working. ADFComponent Delete button is enabled even for roles that dont have permissions for the iterator delete.
- The app works fine when I use without OAM. ADF Security permissions work fine.
- The app works fine when used with OAM, but with ADFSecurity disabled (enforce=false).
- When I enforce ADFSecurity alongwith OAM, ADFSecurity is not working.
In the doc "Oracle Containers for J2EE Security Guide b28957", there is a mention of use of CoreIDPrincipal for permissions. Our OID Permissions entries show
LDAPRealmRole for attribute orcljaznprincipal. I am not sure if this could be the reason.
We have configured AccessServerSDK for the SOA instance and have policy for the urls in the policy manager. We have entries in orion-application.xml, orion-web.xml and system-jazn-data.xml as per the documentations.
How can we get ADFSecurity work when used with OID and OAM?

Have you been able to successfully integrate OAS with OAM & OID? We have similar requriement and so far we have not been able to get it working.
We have application specific roles which we map to OID roles using orion-application.xml.
Any pointers to achieve this would be greatly appreciated.
thanks,
Dipal

How can I create a new label using Pages and Avery Labels products?

How can I create a new label using Avery LAbels and PAges on an imac?

Contacts prints to Avery labels.
Otherwise just open the appropriate Word template from Avery's website, in Pages.
Peter

How can I partition an already in use external?

Similar Messages

Maybe you are looking for