How can I pause and continue tests execution?

Hello dev team,
Thank you for the greate tool for running Flex tests. It is very very helpful for me and saved a lot of time. And I'm waiting for new releases.
I wonder how can I pause/restart/continue running tests.
Thanks in advance.
Alexey

Welcome to Apple Support Communities
Simply press the icon of the app you are downloading, and its name will change to Paused. To resume it, press the icon of the app again

Similar Messages

  • HOW CAN I PAUSE AND RECORD DURING ONE VIDEO?

    I WANT TO BE ABLE TO PAUSE MY VIDEO AND START IT BACK UP WHEN MY SITUATION GETS EXCITING AGAIN.

    What kind of video and how did you upload it? Once you upload the video and it transcodes, you should be able to watch the whole video. How fast is your internet?
    Pattie

  • How can I pause the task and resume it in some times?

    Hi all,
      I have been using traditional DAQ for some times and I swtich to DAQmx recently. In traditional DAQ, I can start a task, pause it for a while and then resume the task. But in DAQmx, I didn't see the same function. Is that any way to do the same thingin DAQmx? Thanks.

    Hi PKIM,
    Have you seen this thread?
    http://forums.ni.com/t5/Multifunction-DAQ/How-can-​I-pause-and-resume-analog-output-using-DAQmx/td-p/​...
    The thread details how to create a pause trigger in software. A better option may be to create a pause trigger in hardware. I'm not sure what type of data acquisition task you are doing, but the method should work regardless. Please let me know if you have any questions.
    Best Regards,
    Ian K.
    Applications Engineer
    National Instruments

  • I need to use an earlier version 3.5 for testing something. I have 3.6. How can I download and install 3.5?

    I need to test a new learning management system used by my university in Firefox 3.5. This browser is certified for Blackboard 9.1 wheras 3.6 is not. I already upgraded to 3.6. How can I download and install 3.5?

    My advice is to install the Firefox Portable version that you need for Blackboard on your computer, and use that installation only for Blackboard. Continue to use 3.6 for all other web browsing. <br />
    FP 3.5.x is here: <br />
    http://portableapps.com/apps/internet/firefox_portable/localization#legacy

  • I have result after execution of OperationBinding. How can i parse and store in list.

    I have result after execution of operation binding. how can i parse and store in list

    Hi,
    I Thought u have custom method in AM which returns List Data type. What is the requirement exactly, bcz commit operation have void return type.
    Ex: create custom method in AMimple class
    public List sampleData(){
    // code here to set the values in List object.
    now expose the above method in client interface. Then add the Method action binding in pageDef file and execute the below code in managed bean
    OperationBinding operationBinding = (OperationBinding)bindings.getOperationBinding("sampleData");
                List result =(List) operationBinding.execute();
    Thanks
    Nitesh

  • How Can I Attach and Link an XML file to a 3D Model in a PDF?

    How Can I Attach and Link an XML file to a 3D Model in a PDF?
    What I am trying to do is find out how to have a 3D model and a parts list linked to it within the PDF file.  I would also like to be able to add to the parts list if at all possible once the pdf has been created.  A template to create future PDF's with the 3D model and list might also be useful.
    I am not entirely sure if this is all possible within a PDF file, but I have viewed a PDF (Adidas Trainer) example which has a Excel file attached to it which links to the 3D model.  I have also had a look at partner products such as Lattice, Tetra4D, Anark, which can do animations and all sorts, but frankly it seems a bit overkill for what I am looking to do.
    Please, any help would be appreciated.  Thanks

    AlliCT59 wrote:
    > Shared Object sounds like it would work, but hten agian,
    I'm really stuck!
    >
    > Thanks for any help.
    >
    > Allison
    I wrote about it while ago, let me paste the whole thing.
    This example has simple
    buttons which upon click go to new sites and in the same time
    place record in form
    of *.SOL file on user drive. That record is read when you hit
    the next button and
    based on that the button will be selected as the one last
    clicked.
    You could use the very same thing just instead of suppressing
    button simply gotoAndPlay frame
    to continue the part you need.
    http://groups.google.com/group/macromedia.flash.actionscript/browse_thread/thread/36649453 1f4fd02d/245a57d0cdaa1d29?lnk=st&q=&rnum=3&hl=en#245a57d0cdaa1d29
    The source is in a different place, i re-upload for you :
    http://www.flashfugitive.com/stuff/SharedObj_urlcheck/
    fla file
    http://www.flashfugitive.com/stuff/SharedObj_urlcheck/beentourl.fla
    Best Regards
    Urami
    <urami>
    If you want to mail me - DO NOT LAUGH AT MY ADDRESS
    </urami>

  • How can you hide a Continue button until all clickboxes are clicked?

    I have seen similar questions to this one, but none seemed to be the exact situation as mine.
    What I have: Several images on a screen.  When a user clicks an image it is replaced with another image.  I am using clickboxes for this task.  I do not wish for them to toggle back and forth. Once they click the original image it should stay changed.
    What I am trying to do: Once a learner clicks all the images (in no particular order) a Continue button appears that allows them to go to the next screen.
    If anyone has some suggestions on this situation please let me know, thanks.

    I cannot log in on the forum for the moment, so will try by answering by
    mail. I was aware of that problem (have presented those solutions so
    often), thought that since you left all images visible once the click box
    was clicked it wouldn't be a problem.
    Two possible solutions:
       1. Easiest one: add a statement in the Always decision that will Hide
       the click box just clicked. It has no sense to click it another time. That
       will mean that you still can do it with a shared action but that shared
       action will have two parameters now, the second one being the click box
       that has to adapted on each application of the shared action.
       2. If you don't want to make the click box hidden (which means at the
       same time disabled), you'll need a user variable for each click box,
       starting with a default value of 0, and toggle it in the Decision 'Always'
       to 1. The second decision will then need a condition that checks the value
       of all the user variables (with AND) and shows the Next button only when
       all variables have the value of 1.
    Sorry, but have to mail, cannot offer a screenshot in that case.
    Lilybiri
    2014-03-13 5:31 GMT+01:00 Joseph_McDonald <[email protected]>:
        Re: How can you hide a Continue button until all clickboxes are
    clicked?  created by Joseph_McDonald<http://forums.adobe.com/people/Joseph_McDonald>in *Advanced
    Adobe Captivate Users* - View the full discussion<http://forums.adobe.com/message/6205043#6205043

  • I downloaded quick time becausei tried watching a movie i purchased on itunes and and have watched it before on my laptop but paused and continued. i tried opening it today and it said i needed to download quicktime and i did. it still says i need to

    I downloaded quick time because i tried watching a movie i purchased on itunes and and have watched it before on my laptop but paused and continued. i tried opening it today and it said i needed to download quicktime and i did. it still says i need to download it, what do I do

    Hi morgangang,
    Although that message is not listed in the following article, I would still go through it for help.  Things like installing in safe mode may help.
    QuickTime: Windows troubleshooting tips
    Troubleshooting Tips
    Make sure your computer meets the system requirements.
    Try running ScanDisk to verify that the directory is OK. This is an important step to take before installing any software.
    Try running the stand-alone version of the QuickTime installer in "Safe Mode." It is available here. This can help to isolate issues with background applications, and some driver conflicts.
    Make certain you have installed the most recent drivers for your sound and video cards. Even if you have a "brand new" computer, it is not guaranteed to have the most recent software installed. Contact the manufacturer of your sound and video cards for additional information.
    Make certain you have installed a recent version of DirectX.
    Errors are usually related to software conflicts, unusable files, or incompatibilities. They can also be related to specific hardware combinations, and sometimes the way in which the hardware is configured. Keep in mind that an error message does not necessarily point to a particular cause or solution. Since there can be many different causes for a particular symptom, some suggestions may not work, and you may need to discover a solution on your own.
    Note: Please contact Microsoft Corporation or your computer vendor for help configuring Microsoft Windows.
    Thank you for visiting Apple Support Communities.
    Nubz

  • How can I pause the screensaver

    How can I pause the screensaver.
    I am using osx 10.8.2
    Thanks in advance

    My screensaver becomes active after 5 mins and displays photos from my iPhoto library.  Before my update to 10.8.2 I was able to pause on a picture  by pressing I think was the down arrow key (to pause and un-pause) and  scroll through the pictures by using the left or right arrow keys the scroll part works still however I am unable to pause. Once I press the down arrow key or spacebar the screensaver comes off.
    Thanks again
    Chris

  • Can we pause and resume download from the mac store?

    Is it possible to pause and continue the download later?
    For example, the Internet stops to work then still can I resume the download?
    please answer my questions.
    thanks in advance!

    Yes you can :-D

  • How can I open and edit files that were developed and published by ftp to my host on my old macbook, which I can no longer access.

    How can I open and edit files that were developed and published via ftp to my host on my old macbook, which I can no longer access. The HD containing the files cannot be accessed. I want to be able to download the published files to be edited in iweb?

    You CAN'T download published files and then edit them in iWeb because iWeb can't open them - it has no import facility so is unable to open any html or css files - a previously published site.
    You can download these files yes, but you'll need to use them as a guide or to cut and paste text from there whilst you re-build your site in iWeb.
    The only other way is to download the files and then open them with an html editor such as TextWrangler or use one of the other web design programmes out there that is capable of importing html and css such as Dreamweaver of Flux 4.
    These are your only alternatives as iWeb can't import and if you want to continue to use iWeb, then you'll have to re-build your site from scratch.  If you do just remember to back up your domain.sites file this time around - it is found under your User/Library/Applicaion Support/iWeb/domain.sites.

  • Where and how can I place and setup my airport to reduce EMF exposure?

    I want to reduce EMF exposure from the Airport Time Machine which is sitting on my desk right now. Where and how can I place and setup it up?

    What role does the TC have in your network?
    If you do not want EMF (actually RF), exposure, move it as far as possible away. There is no rules.. but the inverse square law.. if you double the distance the radiation will drop by 4times. So for every double distance you drop RF by another 4times. Far more EMF is coming from the computer than the TC. So you should move that away as well if you are worried about EMF. 
    Let me also say, as doubtless others will, the RF exposure from TC or any wifi is tiny.
    Firstly they do not continuously transmit.. it will pole briefly every few seconds but only will transmit during actual file transfer.
    The power output of say a cordless phone is aprox 10x that of the TC. And that is or can be the same microwave freq as wifi or near to.
    The mobile phone in your pocket is doing the same thing.
    There is no proof that microwave radiation at such minute levels will do anything harmful.
    If you have headaches etc which you believe are caused by wireless.. then do not use wireless.. turn it off and cable everything. Shield your house as well.
    As a general principle.. shielding is effective.. If for instance you have a 27" imac on your desk.. place the TC on the wall behind the imac.. the metal of the imac will shield you to some extent.. although of course some radiation will bounce from other objects.
    Any shielding of the TC will reduce its effective wireless range.. ie you can put the TC in a metal cage.. (look up Faraday Cage) which will stop all radiation.. If you open windows in the cage.. it should only get signal in those directions but it is not a neat easy rule. And obviously I can achieve the same thing by simply turning the wireless off.
    The v5 utility has a control of power output on the TC.
    This is just the same as distance.
    Transmit power is able to be set to 10%, 25% and 50%. At the cost of range of course.
    If you run Mountain Lion you will have to use tricks to load it.. but it can be done. Lion you can download it.
    http://support.apple.com/kb/DL1482

  • Is there a way to take a video pause and continue playing on same video so i dont have to start a new video on my ipad 2

    is there a way to start a video on my ipad 2 pause and continue playing on same video so i do have to start another video

    In I movie, load the player with your clip.  Play it until the frame you want is in the viewing window.  Then take a screen shot and the whole screen wil be captured and placed in the camera roll.  You can then crop it down to just the picture, or portion of the picture you want.
    Not elegant, but functional.

  • I haven't get any receipt of purchases since mid January 2014. How can I contact and let the itune fix this? (I live in Thailand, not available to call or find local support.)

    I haven't get any receipt of purchases since mid January 2014. How can I contact and let the itune fix this? (I live in Thailand, not available to call or find local support.)

    Has the ISP modems and routers been power cycled then tested again? 
    Possible ISP connection issues or LinksysSmartWiFi.com service outage maybe...
    Are FW versions on all routers up to date? 
    To safely update FW, I recommend doing the following: Download the FW file from the support site first.
    Disable the auto update feature on the router. <If this was on, possible someting was updated recently. I recommend leaving this OFF.
    1. Save router config to file first using IE or FF with all security add-ons disabled.
    2. Factory reset the router with all other devices disconnected or turned OFF accept for 1 wired PC.
    3. Reload or Update the FW using IE or FF. Just download the FW file to your local wired LAN PC.
    4. Factory reset the router and then set up from scratch first and test with out loading the saved config from file. Check to see if any problems are fixed before loading the saved config from file. Sometimes you need to set up from scratch with out loading the saved config file. Just safer that way.

  • How can I pause resume kernel building

    Hello,
    I have an idea.
    I want to build android kernel, but I afraid I cannot finished, because sometimes I haven't enough time. I need to reboot, or switch off the pc.
    So how can I pause, save state or resume the build process.
    I though about it from virtualbox, but mine problems are. The VB do full virtual pc, I dont want to separate cpu, memory and something, and install new arch linux to guest.
    I want only save and resume the build process.
    How can I do?
    I wait your answer.
    Thanks Gyu..

    If you are compiling kernel "by hand", cancel it with ctrl+c for example, and restart the compilation later, it won't recompile the parts you had already compiled (unless you change your .config or something).
    so basically the kernel building should be resumed automatically.
    this probably won't work if your building the kernel with makepkg though.

Maybe you are looking for