How can i photocopy on this printer? it says it can photocopy
Can anyone tell me how do i get the printer to photocopy? i check every menu on the system, and it seems that it does not photocopy
Hi,
The M251nw is a printer only, it is not a multifunction device and does nor provide any copy or scan capabilities.
You may fiind its specification in the following link:
http://store.hp.com/webapp/wcs/stores/servlet/us/en/hp-laserjet-pro-200-color-printer-m251nw?jumpid=...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution
Similar Messages
-
How to set the size of printing subject
I have a deskjet 3520 all in one and my computer is a laptop dv6 with windows7 prof. 64bit.
I want to print out PCB traces so that I can make my own but I don't know to how set the size
with this printer. They take up the whole page when I want them to be 2.35x3.35.
Don't know if this can be done with this printer.
Any help would be apreciated.
This question was solved.
View Solution.Can you post a link to a sample, or upload here a sample? That would make it easier to debug what is going on.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
Lpadmin creates printer, share this printer selected
I have used the following command to install a printer:
/usr/sbin/lpadmin -p "name of printer" -E -v lpd://"printer IP or DNS"/"queue name" -P "path to PPD file" -D "description"
however, after looking at the printer on the computer via sys prefs, the printer has been added with the "share this printer" checkbox enabled.
How do I deselect share this printer via cli? (or, how can I modify my command so that this isn't enabled?)
Thanks in advanceThe only way I get an update of at least printer sharing is: SysPref/Sharing/highlight printer sharing(not checking it/Open print and fax preferences. See below pic.
-
My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?
OK great info!
I found 2 possible ethernet to USB adapters:
By "Plugable": USB 2.0 to ethernet LAN wired network adapter - seems this will work, but I'll contact Plugable.
2. Apple USB Ethernet Adapter
Easily connect your MacBook Air computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your MacBook Air and provides an RJ-45 connector that supports 10/100BASE-T performance. BUT NOT SURE IF THIS WILL WORK ON ANYTHING BUT a MacBook Air…
One person commented:
This little gem used to be the device of choice for adding a second Ethernet interface to a Mac Mini Server and I'd been using one that way for about a year. After doing a software update to 10.6.6 it stopped working. Forewarned is forearmed – it appears that Apple is finally enforcing the MacBook Air system requirement.
Thanks for any additional comments.
Best regards,
Steve Schulte
Sunday 6 January 2013 -
In the new version of Pages, the text in the tables are no long clear and sharp as before, they look embedded on all print outs. How can I change this.
You can do a check for corrupted fonts and other font issues:
*http://www.thexlab.com/faqs/multipleappsquit.html - Font Book 2.0 Help: Checking for damaged fonts
*http://www.creativetechs.com/iq/garbled_fonts_troubleshooting_guide.html -
After upgrading to Mountain Lion 10.8.2 on my iMac, I cannot print to my Samsung B&W Laser printer ML 2525W either by USB or wireless. Any help on how to setup or reconfigure would be apprecaited.
I either print blank pages or prints one time then goes off line, or spits out a bunch of blank paper, etc. Have gone through all the standard fixes, reboot, reset , reload driver, etc.From the link to the Thread you provided, I worked through the one message procedures that were listed.
For ease of reference, I have copied them and printed them below. This was an old thread but the guidance still works with no firmware upgrade required.
I would stress that you MUST delete any and all files relating to USB connection of the printer to the MAC, including all print drivers (from both Apple and Samsung either from CD or web downloads) and all print queues, etc. I was only able to get the printer to properly hand shake with my Mac by setting it up wirelessly after all old files were deleted with hard power off reboots on both the Mac and Printer.
I hope that someone from Apple will pass this note along to their programing department because there is some type of incompatibility in the new ML OS and the Samsung ML2525w print dirvers used for a cable (USB) type connection. Apple needs to be talking to Samsung to get the USB issue resolved. I am going to post this same message on the Samsung site to see if someone from there will contact Apple to work together on a final solution for USB connectivity.
Here is the steps I followed to get my ML2525w to work in the wireless mode. Again, I cannot stress the need to clean out all the old files (drivers, print queues, etc. - everything) before setting up wirelessly.
As a note, I ran this printer with Lion for almost 2 years and it always worked fine (both wireless and USB). From other comments on the thread, users were good with this printer using Lep. and Snow Lep also. - - no issues from either a USB connection or wireless until Mountain Lion.
Before the fix, I was experiencing many of the same issues as described on user chat threads, printer going offline after a print job. 1st page sometimes printing but all the rest of the pages were garbage. No printing at all. Printer just running a bunch of blank pages out. etc.
I run an iMAC 27" desktop with the ML OS upgrade just installed from Lion.
"I've just installed one of these printers for my parents.
First of all, don't waste your time connecting the ML-2525W as a USB printer. The printer will go offline after each print job. It's hopeless, at least (I assume) until Samsung gets around to publicly releasing a firmware update.
Instead, you have to use the ML-2525W as a wireless printer. In that mode, it works fine.
This is what I did:
(1) First, if you have already attempted to install the Samsung driver software from the included CD-ROM, uninstall it. Get the uninstaller from the Samsung support site:
http://www.samsung.com/us/support/downloads/ML-2525W
Download the "Printer Driver (ver. 4.0)" ZIP file. It unzips to a folder that contains the uninstaller. Likewise, download the "Smart Panel Driver" ZIP file and uninstall the Smart Panel software.
(2) Disconnect the USB cable from the printer, if it is connected. Pull the power plug on the printer and power cycle it.
(3) Restart your Mac.
(4) Go to the "Printer Driver (ver. 4.0)" folder that you previously unzipped. Inside it is a folder named "WirelessSetting". Open the folder and run the "Wireless Setting.app".
(5) The application will ask you to connect the USB cable to the printer. Do so, and the Mac should be able to communicate with the printer to perform the wireless setup.
(6) The application will show you a list of wireless networks. One of them is the wireless interface in the printer (ad-hoc). You can ignore that unless you intend to use the printer without connecting to another wireless network. In my case, I selected the wireless network in my parents' home (infrastructure) and entered the security passphrase. The application then configured the wireless interface in the ML-2525W to connect to the home network.
(7) The Wireless Setting application will then tell you to disconnect the USB cable.
(8) After finishing the Wireless Setting application, go to Word, Textedit, Pages, or Safari, and select a file or page to print. In the print dialog window, you should see the ML-2525W as a "Nearby Printer" (i.e. via Bonjour). Select the ML-2525W, and your Mac will automatically connect to Apple's Software Update and download the latest Samsung driver. If for any reason the Software Update download does not succeed, you can manually download and install the Apple driver using the previously published link in this discussion.
(9) After that, you should be able to print to the ML-2525W whenever you want, without the printer going offline.
(10) If you have a USB printer queue still in your Print & Fax Preferences (from your previous unsuccessful attempt to connect via USB), you can delete it. You only need to keep the Bonjour queue.
Obviously YMMV, but in my case this procedure got the printer working reliably without the need for a firmware update."
MacBook (white 12"), Mac OS X (10.6.5) -
How can I print from my iPad through my Mac Book Pro which is connected to a printer? I was told I could do this when the iPad and Mac Book Pro are synched together.
Antique lady wrote:
So If I download Printopia on my Mac Book Pro, do I go to iTunes to somehow connect the computer and the iPad?
No.
Printopia (running on your Mac) connects the iPad to your printer. -
Does anyone know how to access sms text messages from iphone 5c backup from icloud or itunes? Apparently SMS can be restored so data I need must be stored in backup. I need to print a series of abusive/threatening SMS messages received on my iphone 5c from one sender. I need the time, date & whatever data is stored about source/sender of messages, as well as content. How can I access this data to create a chronological record of the abusive SMS messages and can I preserve the iphone's message log specifically-- so I can access records of these texts without having to restore a back-up? I need to do this to provide evidence for my solicitor and preserve that evidence for future court proceedings, thank you.
http://www.wideanglesoftware.com/touchcopy/index.php?gclid=CMr1..
http://www.ecamm.com/mac/phoneview/ -
Since upgrading to v 4.01 I am unable to print from a .pdf opened in the browser. How can I fix this?
I can save the page, open in Adobe Reader and print. When in the browser the File - Print command does nothing. Printer screen does not open.
Windows XP, all updates installed.Hi,
One thing to slow it down: low ink. Please check ink cartridges and replace if required.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
I would like to print architectural plans to scale from a pdf. How can I do this? Even just a section of the plan.
thank-youDid you try Google?
https://www.google.com/search?q=print+architectural+plans -
How can I fix this printer error with Samsung SCX-4300 and SCX-4521f on Windows Server 2008 R2?
I have two printers installed on Windows Server 2008 R2 (64-bit):
1. Samsung SCX-4521f
2. Samsung SCX-4300
There are two computers (Windows 7 Professional, 32-Bit) connected to this server that utilise these shared printers.
The drivers installed are as follows:
SCX-4x21_Win7_Print.exe (Win 2000/XP/2003/Vista/2008/Win 7 3.04.96:03 Print Driver 11 Dec, 2009 12.37 MULTI LANGUAGE)
SCX-4300_Print.exe (Win 2000/XP/2003/Vista/2008/Win 7(32,64bit) 3.04.95:07 Print Driver Jan 19, 2011 53.07 MULTI LANGUAGE)
After printing documents for some time (within a 24 period) the printers no longer respond to print requests.
On the server opening "Control Panel\Hardware\Devices and Printers" shows the two printers with yellow exclamation marks.
The "SCX-4x21" printer shows the "Status" as "Needs troubleshooting" and "Printer: Error".
The "SCX-4300" printer shows the "Status" as "Needs troubleshooting".
Neither will print a test page.
Searching for new drivers automatically returns saying: "The best driver software for your device is already installed".
The error persists and nothing will print.
When double-clicking on the "SCX-4x21" printer (or going to "Control Panel\Hardware\Devices and Printers\Samsung SCX-4x21 Series") you see the following:
"Printer: Error" and "N document(s) in queue".
Clicking on either of these brings up the print queue and shows a document with the status of "Error - Printing".
As each job with an error is cancelled the next one attempts to print and also displays an error like the last.
Once all the jobs are cleared the printer information says "Printer: Ready".
Sending a "Print Test Page" sends the printer into an error state saying "Printer: Error".
With the "SCX-4300", sending a "Print Test Page" displays a bubble saying: "Toner Empty: Replace Toner".
However, I can't see any specific error messages.
How do I find out what exactly "Needs troubleshooting"?
Please can anyone advise further?The printer (SCX-4300) has stopped again.
Since it has been stopped I have done your recommendations:
Unticked the "Enable bidirectional support" option under the "Ports" tab in the printer properties.
Set the "Interactive Services Detection" to Automatic and started it.
Unfortunately the printer did not start printing, the print jobs did not restart or delete.
I decided to check the Operational logs that we enabled.
The first job I see goes like this:
Information: Rendering job 41.
Error: The print spooler failed to delete the file C:\Windows\system32\spool\PRINTERS\00041.SHD, error code 0x2. See the event user data for context information.
Information: The print job 41 was sent through the print processor SSE1MPC on printer Samsung SCX-4300 Series, driver Samsung SCX-4300 Series, in the isolation mode 1 (0 - loaded in the spooler, 1 - loaded in shared sandbox, 2 - loaded in isolated
sandbox). Win32 error code returned by the print processor: 0x0.
Information:Printing job 41.
Information:Spooling job 41.
This job actually printed.
Other jobs printed fine with no error.
There are no other errors in the "Operational" log other than the "print spooler failed to delete" error.
Any ideas what to try now?
Update: Unticking the "Enable bidirectional support", clearing the print queue and then trying again seems to have fixed the problem for now. -
When i bought this iMac i failed to register correctly and as i am trying to install a printer i need to do this when i am logging on. How can i create new password
See
http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/ and
http://osxdaily.com/2011/09/19/change-password-mac-os-x-10-7-lion-without-knowin g-current-password/
which also apply to Mtn Lion and Macericks. -
When I try to print a photo from iphoto, I click print and the preview shows a lot of the photo cut off. It also prints this way. How can I print the whole photo?
After selecting File > Print, a pop-up window should appear. Select "Customize" and this should take you back into a panel within iPhoto. Towards the bottom, you should see an option for "Layout". Select this option and choose the correct photo orientation.
Hope this helps! -
I am shooting with a Nikon D60 on Fine Format and unable to print larger than 11x14. I have been able to print larger pictures. I am told iPhoto reduces the size of the file when uploaded. Is this true? If so how can I change this? I need 16x20's
I am shooting with a Nikon D60 on Fine Format and unable to print larger than 11x14. I have been able to print larger pictures. I am told iPhoto reduces the size of the file when uploaded. Is this true? If so how can I change this? I need 16x20's
-
I installed Mountain Lion. When I try to print on my Epson R3000 I get a notification that rastertoescpll quit unexpectedly. How can I fix this?
Sorry but that's the very driver that I think caused my problem and I'm assuming Elstel's. Yes it's an Epson Stylus Photo R3000. From the posts I've read the new driver is faulty. Driver V9 seems to work temporarily with my Mountain Lion 10.8.4. It worked perfectly when I set up my new printer and installed the provided software. When I started the day to day suddenly it wouldn't print and I had the rastertoescpll error. My assumption is that my "automatic updates" setting updated the software over night and then it woudn't work. I then tried your link from a previous post and installed that upgrade. No change. I've only been able to print this afternoon by re-installing the printer with the provided disk. If pixies come during the night and I wake up tomorrow morning with that error message again, after screaming, I will then use my TM to go back to where it worked! Very confused. I was really hoping that Yuengdog1983's solution for the others would have helped me but as I said I've always had my computer named.
-
I'm using Acrobat XI on Windows. I want to add my company's logotype as a watermark to a PDF document. How can I do this? When I add it as a file (jpeg), the logotype is printed on a white square background. It will be positioned on the PDF document on a light, uniform yellowing color. I want this to show through, as if the logotype was stamped directly on the document. Thanks.age to be completely transparent
The above was truncated and garbled a bit and I can't figure out how to edit it. So just to repeat the question a bit more clearly: "I'm using Acrobat XI on Windows. I want to add my company's logotype as a watermark to a PDF document. When I add it as a file (jpeg), the logotype is printed on a white square background (because the jpeg is square with a white background of course). It will be positioned on the PDF document on a light, uniform yellowish color, which I want to show through. I want it to look as thought the logotype was stamped directly on the document. Thanks.
Maybe you are looking for
-
Can apple tell me if someone else is using my iphone if so can they give me the phone number as I have suspicions
-
Error Handling for Bundled Updates
HI, Runtime errors can occur during execution of bundled updates. How are they handled?
-
Why am i restricted from using the software when trying to download firefox?
after 'running' the download it tells me it's located in setup/install and I am restricted from using the software
-
Hi Friends, My query is what ever we develop in ABAP i.e reportr,BDC,scripts,smart forms,BAPI's etc will be called as objects. why we are calling them as Objects? Regards, Kishore Thanks in advamce
-
Peut-on s'abonner à Indesign CC pour un mois seulement?
Bonjour, Je souhaiterais savoir s'il est possible de s'abonner à Indesign CC pour un mois seulement. J'ai l'impression que même si on annule notre abonnement on est obligé de payer le deuxième mois. Merci pour votre aide. Marine