How can I place good screenshots into InDesign?
This is essentially what I am trying to do as well...Is there a correct answer that was given? How do know which answer is the one correct answer that is noted in the forum? My question is identical to the one below. My screen shots are off a website.
I am working on a guide in InDesign to distribute to our customers that shows step by step instructions on how to use our software. I am taking screenshots of the software and placing them into InDesign. I have tried this many different ways now and I can't get the images to look clear. I have taken the screenshot and pasted it into Illustrator, Photoshop, even Paint and then saved it as many different file types, jpeg, gif, tif, etc. It looks great in Illustrator or Photoshop but after I place the image into InDesign it looks awful. It looks blurry on the screen and after I print.
If I paste the image into Illustrator and then copy from there and simply paste into InDesign the image looks much better. Almost perfect. But I know this isn't the right way to do this and the images aren't saved/linked this way.
Does anyone have any suggestions?
Kitti-girl's Mom wrote:
This is essentially what I am trying to do as well...Is there a correct answer that was given? How do know which answer is the one correct answer that is noted in the forum? My question is identical to the one below. My screen shots are off a website.
I am working on a guide in InDesign to distribute to our customers that shows step by step instructions on how to use our software. I am taking screenshots of the software and placing them into InDesign. I have tried this many different ways now and I can't get the images to look clear. I have taken the screenshot and pasted it into Illustrator, Photoshop, even Paint and then saved it as many different file types, jpeg, gif, tif, etc. It looks great in Illustrator or Photoshop but after I place the image into InDesign it looks awful. It looks blurry on the screen and after I print.
If I paste the image into Illustrator and then copy from there and simply paste into InDesign the image looks much better. Almost perfect. But I know this isn't the right way to do this and the images aren't saved/linked this way.
Does anyone have any suggestions?
This old post from Dov Isaacs
http://forums.adobe.com/message/2938256#2938256
may be helpful. Also the whole discussion in the thread that begins with
http://forums.adobe.com/message/2936631#2936631
is worth at least skimming.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices
Similar Messages
-
How can I place a file in INDESIGN 3 at 100%
I am a novice Indesign user using Indesign 3 on a PC. The other office I work with is using Indesign 3 on a Mac.
When I open their indd files and view them, the placed images indicate 100% when I use the direct selection tool to check the percentage. However, If I design the same page, create a frame and place the same image from the original link they used as well, when I fit the content proportionally, and use the direct selection tool to see the size, it comes in at the percentage from the original file, say 42% if it was decreased by approx. half.
I am sure there is an easy explanation for this, but I cannot find it in my searching. Can someone help me understand what I am missing here.
I appreciate your assistance with this question.
Ginger CreswellSince you have her file, what happens if you open her file and place the image without first making and selecting a frame? Is it the same size as the image in the frame?
>Yes when I make the frame, place the image, fit the image to the frame, it reads 42% -(then 100% when selected with the black arrow tool) this is the way I believe it should be.
Unless the frame you create is exactly the same size as the image you place into it, it will always change size if you fit the image to the frame. If the frame is smaller, the image will have to be made smaller to fit into the frame. The same applies to a larger frame.
I don't get the impression that you are confusing scaling with cropping, but it should be mentioned that you can have a 100% size image in a smaller frame if part of the image is outside the boundries of the frame.
Also, I mentioned in an earlier post that the most likely error would be that the image in the original isn't the same (has the same name, but has been changed in its original program) as the image you are trying to place, even if your San Fran designer sent it to you (she could have sent you the wrong image). If you open her file and package it, it will spit out a copy of the image, which you can try placing to see if you still get the same results. -
How can i import .pmd files into Indesign CC, which where created with pagemaker?
Hello!
i have a problem with a new Installation of indesign cc... i can*t import old .pmd Pagemaker files into it!!
it was possible with Indesign cs6, but apparently no longer..!?
..is there an extension or anything else i could use?
thanks in advance for any Tip,
sincerely Sanitest..well, the fact that i can install an older Version of id is an releave...!but! the fact that i cannot open .pmd file in id cc is .. in my humble opinion
a bad sign of things to come.. i mean sooner or later adobe will completely cancel the ability to download/use id cs6 ... and then what?... buy an old version of pagemaker
or id 1..cs6?
if anyone close to adobe has anything substantially to say.. please go ahead..!
best regards Sanitest -
How can I place Tagged Text in InDesign
I use tagged text in the files I place
in InDesign. For example,
<cn>This is the chapter number
<ct>This is the chapter title
<cst>This is the chapter subtitle
<bt>This is the beginning of the body text
<ah>This is an A-level head
and so on. In PageMaker, there was a checkbox in the "place"
dialogue box named "Read tags." I checked that, and when I placed the file in the template (in which I had the styles defined), the whole chapter appeared with the formatting I wanted for each style.
I can't find the equivalent checkbox in InDesign. I can't believe it is no longer there, but search as I do, I can't find it. There is a lot online about exporting tagged text, but where, oh where, is my checkbox for placing tagged text? If someone knows where it is, I'd be very grateful.John Hawkinson wrote:
For reference SuzeiQ's thread in the scripting forum is here: http://forums.adobe.com/thread/908213.
Though I think it really wasn't a scripting question :-).
Also, Peter, post your script!
I presume that last was directed to Mr. Kahrel... -
How can I place a MP4 into Dreamweaver and have it autostart when you load a web page?
Hi All
I am trying to place a MP4 video/music clip into a webpage.
I would like it to auto start once you click on the page, play and then the page loads.
Is this even possible?
Thanks in advance to all those who will be able to helpVideo Streaming Basics -
http://www.mediacollege.com/video/streaming/
Embed Tag Attributes for QuickTime player -
Look at AutoHref and AutoPlay
http://www.apple.com/quicktime/tutorials/embed2.html
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com -
How can I import scanned images into InDesign CS5 using Mac10.6?
I want to be able to import scanned images. What file format must I save the data in?
Greg Parks L.A. wrote:
For example, to print on a press you need images that are CMYK at 300 ppi, 100% scale. If you're just making office-quality documents or PDFs, you can use RGB images at a lower resolution.
You do not need images to be CMYK for print. InDesign can handle the conversion from RGB to CMYK when exporting to PDF. The old rule of thumb that images for print need to be 300 ppi is history. The ideal minimum resolution is halftone screen times the square root of 2 (1.41421356). But you can get away with a lower resolution for most images. -
How can I place an image into an email receipt or confirmation message?
Once a FormsCentral form is completed and submitted, I would like to send the submitter an email receipt or confirmation message that includes an image and a URL link. Is that possible? I know an image can be inserted into the first form they complete, but I'm not seeing that feature in any of the autoresponse options.
Hi,
Currently, only a plain text message may be provided when customizing the email receipt or confirmation message.
Regards,
Brian -
How to import a PSD file into Indesign WITH layers so it can be edited/saved as an InDesign file?
How to import a Photoshop file into Indesign CS6 so that it's layers show in InDesign and it can then be edited/saved as an InDesign file?
MyTienN wrote:
Someone had mentioned the possibility of saving each individual layer in Photoshop as a png file and importing into Indesign and adjusting it in there
What do you mean by "adjust"? Editing of Photoshop images should be done in Photoshop.
Sure, it's possible to save individual layers from an image in Photoshop as inidvidual files in a variety of formats, but what's the point? You could just as easily import the layered file, then copy/paste it into a new layer for each layer in the image and use layer visibility to control which ones show. I don't think that will do you a lot of good, though, if you use adjustment layers or opacity controls on the layer in Photoshop. -
my computer crashed so i had to reformat, but the only problem is i lost my old itunes account, had to download new version. Now i have an ipod full of music but how can i place all my music I have on the ipod into my new itunes account??
Not if you first do a sync and have iTunes make a backup. However, if your only copy of the iTunes data is in the Touch, then you need to first copy the data to a new iTunes Library using third-party software such as Phone To Mac.
-
How do I import a .PDF into inDesign?
How do I import a .PDF into inDesign? Does anybody know how? I need to edit a book in inDesign that is a .PDF. So if anyone know how to do that please tell me.
Bob, Peter, grmg, many thanks for your very helpful comments. Delighted mac/pc not relevant. Will scratch that from list of herrings to chase.
Re PDFs - actually, I'm working in Acrobat (not just a finalized PDF), and Acrobat does of course allow editing of a sort; I'd concluded that since Adobe is willing to tolerate that degree of editing with its product, it should therefore tolerate moving its native format (*.pdf) into another of its own native formats (*.indd). I see that's a misconception.
This morning I tried all flavors I could find of getting my Acrobatted content into ID3, including copy/paste, place, and import (from the ID side); none was satisfactory. Output from Acrobat to Word and then placing Word was fine for English but destroyed the Greek - not just wrong font, but complete gobbledygook and loss of all diacriticals. Names of fonts don't matter for my purposes; the legibility of the English, and the legibility and tonic accuracy of the Greek do matter. Author of this project is not tech-savvy and is using old Greek system as well; nothing he or i can do to fix that.
Current plan is to request author to provide me his native files, which will be Mac files. Am I understanding the Import dialog and your collecitve comments to suggest that with that file resident on my PC (and unopened), I can use the Place dialog, with "Show Options" selected, to get the Mac file into ID?
Chapeaux to those of you with constructive comments - hugely appreciated.
YC -
How can i write a string into a specified pos of a file?
How can i write a string into a specified pos of a file without read all file into ram and write the whole file again?
for example:
the content of file is:
name=123
state=456
i want to modify the value of name with 789
(write to file without read all file into ram)
How can i do it? thank youtake this as an idea. it actually does what i decribed above. you sure need to make some modifications so it works for your special need. If you use it and add any valuable code to it or find any bugs, please let me know.
import java.io.*;
import java.util.*;
* Copyright (c) 2002 Frank Fischer <[email protected]>
* All rights reserved. See the LICENSE for usage conditions
* ObjectProperties.java
* version 1.0, 2002-09-12
* author Frank Fischer <[email protected]>
public class ObjectProperties
// the seperator between the param-name and the value in the prooperties file
private static final String separator = "=";
// the vector where we put the arrays in
private Vector PropertiesSet;
// the array where we put the param/value pairs in
private String propvaluepair[][];
// the name of the object the properties file is for
public String ObjectPropertiesFileName;
// the path to the object'a properties file
public String ObjectPropertiesDir;
// reference to the properties file
public File PropertiesFile;
// sign for linebreak - depends on platforms
public static final String newline = System.getProperty("line.separator");
public ObjectProperties(String ObjectPropertiesFileName, String ObjectPropertiesDir, ObjectPropertiesManager ObjectPropertiesManager)
// System.out.println("Properties Objekt wird erzeugt: "+ObjectPropertiesFileName);
this.ObjectPropertiesFileName = ObjectPropertiesFileName;
this.ObjectPropertiesDir = ObjectPropertiesDir;
// reference to the properties file
PropertiesFile = new File(ObjectPropertiesDir+ObjectPropertiesFileName);
// vector to put the param/value pair-array in
PropertiesSet = new Vector();
// System.out.println("Properties File Backup wird erzeugt: "+name);
backup();
// System.out.println("Properties File wird eingelesen: "+PropertiesFile);
try
//opening stream to file for read operations
FileInputStream FileInput = new FileInputStream(PropertiesFile);
DataInputStream DataInput = new DataInputStream(FileInput);
String line = "";
//reading line after line of the properties file
while ((line = DataInput.readLine()) != null)
//just making sure there are no whitespaces at the beginng or end of the line
line = cutSpaces(line);
if (line.length() > 0)
//$ indicates a param-name
if (line.startsWith("$"))
// array to store a param/value pair in
propvaluepair = new String[1][2];
//get the param-name
String parameter = line.substring(1, line.indexOf(separator)-1);
//just making sure there are no whitespaces at the beginng or end of the variable
parameter = cutSpaces(parameter);
//get the value
String value = line.substring(line.indexOf(separator)+1, line.length());
//just making sure there are no whitespaces at the beginng or end of the variable
value = cutSpaces(value);
//put the param-name and the value into an array
propvaluepair[0][0] = parameter;
propvaluepair[0][1] = value;
// System.out.println("["+ObjectPropertiesFileName+"] key/value gefunden:"+parameter+";"+value);
//and finaly put the array into the vector
PropertiesSet.addElement(propvaluepair);
// error handlig
catch (IOException e)
System.out.println("ERROR occured while reading property file for: "+ObjectPropertiesFileName);
System.out.println("ERROR CODE: "+e);
// System.out.println("in ObjectProperties");
// function to be called to get the value of a specific paramater 'param'
// if the specific paramater is not found '-1' is returned to indicate that case
public String getParam(String param)
// the return value indicating that the param we are searching for is not found
String v = "-1";
// looking up the whole Vector
for (int i=0; i<PropertiesSet.size(); i++)
//the String i want to read the values in again
String s[][] = new String[1][2];
// trying to get out the array from the vector again
s = (String[][]) PropertiesSet.elementAt(i);
// comparing the param-name we're looking for with the param-name in the array we took out the vector at position i
if (s[0][0].equals(param) == true)
//if the param-names are the same, we look up the value and write it in the return variable
v = s[0][1];
// making sure the for loop ends
i = PropertiesSet.size();
// giving the value back to the calling procedure
return v;
// function to be called to set the value of a specific paramater 'param'
public void setParam(String param, String value)
// looking up the whole Vector for the specific param if existing or not
for (int i=0; i<PropertiesSet.size(); i++)
//the String i want to read the values in again
String s[][] = (String[][]) PropertiesSet.elementAt(i);
// comparing the param-name we're looking for with the param-name in the array we took out the vector at position i
if (s[0][0].equals(param) == true)
//if the param-names are the same, we remove the param/value pair so we can add the new pair later in
PropertiesSet.removeElementAt(i);
// making sure the for loop ends
i = PropertiesSet.size();
// if we land here, there is no such param in the Vector, either there was none form the beginng
// or there was one but we took it out.
// create a string array to place the param/value pair in
String n[][] = new String[1][2];
// add the param/value par
n[0][0] = param;
n[0][1] = value;
// add the string array to the vector
PropertiesSet.addElement(n);
// function to save all data in the Vector to the properties file
// must be done because properties might be changing while runtime
// and changes are just hold in memory while runntime
public void store()
backup();
String outtofile = "# file created/modified on "+createDate("-")+" "+createTime("-")+newline+newline;
try
//opening stream to file for write operations
FileOutputStream PropertiesFileOuput = new FileOutputStream(PropertiesFile);
DataOutputStream PropertiesDataOutput = new DataOutputStream(PropertiesFileOuput);
// looping over all param/value pairs in the vector
for (int i=0; i<PropertiesSet.size(); i++)
//the String i want to read the values in
String s[][] = new String[1][2];
// trying to get out the array from the vector again
s = (String[][]) PropertiesSet.elementAt(i);
String param = "$"+s[0][0];
String value = s[0][1];
outtofile += param+" = "+value+newline;
outtofile += newline+"#end of file"+newline;
try
PropertiesDataOutput.writeBytes(outtofile);
catch (IOException e)
System.out.println("ERROR while writing to Properties File: "+e);
catch (IOException e)
System.out.println("ERROR occured while writing to the property file for: "+ObjectPropertiesFileName);
System.out.println("ERROR CODE: "+e);
// sometimes before overwritting old value it's a good idea to backup old values
public void backup()
try
// reference to the original properties file
File OriginalFile = new File(ObjectPropertiesDir+ObjectPropertiesFileName);
File BackupFile = new File(ObjectPropertiesDir+"/backup/"+ObjectPropertiesFileName+".backup");
//opening stream to original file for read operations
FileInputStream OriginalFileInput = new FileInputStream(OriginalFile);
DataInputStream OriginalFileDataInput = new DataInputStream(OriginalFileInput);
//opening stream to backup file for write operations
FileOutputStream BackupFileOutput = new FileOutputStream(BackupFile);
DataOutputStream BackupFileDataOutput = new DataOutputStream(BackupFileOutput);
// String content = "";
String line = "";
// do till end of file
while ((line = OriginalFileDataInput.readLine()) != null)
BackupFileDataOutput.writeBytes(line+newline);
// error handlig
catch (IOException e)
System.out.println("ERROR occured while back up for property file: "+ObjectPropertiesFileName);
System.out.println("ERROR CODE: "+e);
System.out.println("this is a serious error - the server must be stopped");
private String cutSpaces(String s)
while (s.startsWith(" "))
s = s.substring(1, s.length());
while (s.endsWith(" "))
s = s.substring(0, s.length()-1);
return s;
public String createDate(String seperator)
Date datum = new Date();
String currentdatum = new String();
int year, month, date;
year = datum.getYear()+1900;
month = datum.getMonth()+1;
date = datum.getDate();
currentdatum = ""+year+seperator;
if (month < 10)
currentdatum = currentdatum+"0"+month+seperator;
else
currentdatum = currentdatum+month+seperator;
if (date < 10)
currentdatum = currentdatum+"0"+date;
else
currentdatum = currentdatum+date;
return currentdatum;
public String createTime(String seperator)
Date time = new Date();
String currenttime = new String();
int hours, minutes, seconds;
hours = time.getHours();
minutes = time.getMinutes();
seconds = time.getSeconds();
if (hours < 10)
currenttime = currenttime+"0"+hours+seperator;
else
currenttime = currenttime+hours+seperator;
if (minutes < 10)
currenttime = currenttime+"0"+minutes+seperator;
else
currenttime = currenttime+minutes+seperator;
if (seconds < 10)
currenttime = currenttime+"0"+seconds;
else
currenttime = currenttime+seconds;
return currenttime; -
How can I import iPhone contacts into Mac Address book
I recently purchased a MacBook Pro and am in the process of trying to dump my Windows PC.
All of my important contacts are on my iPhone. How can I get those contacts into my Mac Address Book?
The same question goes for the music (ripped from CD) and my video files that are on my iPhone? The media is not that big of a deal because I can easily transfer it from my PC to my Mac but I assume I am not the only one in the world trying to do this and that Apple would make it very easy for MSFT Windows users to easily migrate to Macs.
I must be an idiot but I don't see any option in iTunes to transfer the data from my iPhone into iTunes and/or the Address Book.
ThanksThe iPhone's primary function is NOT a word processor or a spread sheet analyzer.
I didn't say, nor was I trying to imply ANYTHING of the sort. You should read what I provided again a little slower and in it's entirety, not taking this out of context, which you made into Apples and Oranges.
It IS an iPod, a device designed to store and play music (in addition to being a browser and a phone).
It is a phone, an iPod, and an internet device, which supports transferring iTunes content from iTunes on a single computer ONLY.
Making it difficult to transfer my legal music from my iPhone to my Mac does not make me want to go out and buy more Apple products or Apple software.
Good, then don't - no skin off my back. I couldn't care less if you want to remain a Windows sufferer. All this doesn't come from Apple. Much of it comes from those who OWN the distribution rights for content sold thru the iTunes Store.
All of Apple's commercials imply how easy the user experience is over Windows. Well, in this case, they missed the boat BIG TIME!
Everyone is entitled to their opinion, but let me get this straight. You will likely need to transfer much more than just music from your Windows PC to your Mac and if so, how do you plan on accomplishing this? If you are transferring Word and Excel files, photos, and any other data, you won't be using an iPhone for this, so I don't see the big deal with transferring your iTunes library along with all other data being transferred.
I understand that the iPhone was not designed to be used as a backup. However, you allow the contacts to be merged in but not the music that I legally installed (but didn't purchase from the iTunes store).
I don't allow anything - this is a user to user help forum only.
As I provided in my first post in this thread - the sync process for contact information, calendar events, and bookmarks with an iPhone is bidirectional with the supported application on your computer. This is a sync process by definition of syncing - which is not the same for other data such as iTunes content and photos transferred from your computer to your iPhone.
http://support.apple.com/kb/HT1296
Apple wants to make it difficult unless I purchased the music from iTunes.
No, Apple or really those who own the distribution rights or the copyright holders for content sold thru the iTunes Store wants to make this difficult. Content sold thru the iTunes Store is set up by Apple to be a break even - which is included with the Apple stockholder's report. Apple makes their profit via sales of the iPod and iPhone. The bulk of the iTunes Store revenue goes to those who own the distribution rights or the copyright holders for the content.
In addition, if my hard disk suffered a crash and I lost all my music it just seems stupid not to be able to pull it off my iPhone (yes, I know data should be backed up on a different drive, and mine is, but I am sure a lot of people do not back up their data).
Maintaining a backup of your data is important for this very reason, and for other reasons which is not Apple's responsibility. I believe iTunes includes an occasional warning message to backup your iTunes library (which can be turned off), and iTunes includes an option to transfer content purchased from the iTunes Store from an iPod or iPhone - since the overwhelming majority of this content includes DRM protection required by those who own the distribution rights or the copyright holders.
The iPhone was not designed as an external storage device or as a backup device - end of story. If someone chooses not to maintain a backup, they are playing Russian roulette with their data. Maintaining a backup is important regardless the platform, but even more so when running Windows with constant virus, adware, and spyware concerns. -
Hello..
"what are the tools to create a digital magazine for ipad version and how can be place it in newsstand?"
I am very tired after done a week of R&D on this issue..
But i doesn't get any fair solution for this one..
I hope this is best option to place my issue here to get quick solution..
Thanks and Regards..We are all users here.
There is no one here from Apple.
In order for you to develop and distribute content for the iPad, you need to become an apps developer.
Not sure where you sign up for this or who you have to call.
There should be a place on Apple's site that refers to a section of the site if you want to be an Apple iOS content developer.
It cost, I believe $99 U.S. to become an Apple apps developer. You'll agree to Apple's Non-disclosure rules. You'll receive Apple's app/software developers kit,and access to Apple's app developer site.
No one here is going to be able to help you.
Good Luck. -
How can we place a F4 help in a parameter in selection screen
Hi,
How can we place a F4 help in a parameter in selection screen. Can we do add a Process 0n Value request similar to a module pool prg in stadard report program.
sajiHello Saji,
Try below attached report.
Regards,
Naimesh.
Reward, if it is useful..!
REPORT ZTEST_NP_1.
DATA: HELPVAL1 LIKE HELP_VALUE OCCURS 0 WITH HEADER LINE .
DATA: VALUE_TAB LIKE PDTASK-OTEXT OCCURS 2 WITH HEADER LINE.
DATA: VALUE LIKE FEBMKA-BANKN,
GIVEN_VALUE LIKE HELP_INFO-FLDVALUE.
DATA: IT_T005T LIKE T005T OCCURS 0 WITH HEADER LINE,
IT_T002T LIKE T002T OCCURS 0 WITH HEADER LINE.
SELECTION-SCREEN: BEGIN OF BLOCK BLK1 WITH FRAME TITLE ABC.
PARAMETERS: P_SPRAS LIKE T002T-SPRAS,
P_LAND1 LIKE T005T-LAND1.
SELECTION-SCREEN: END OF BLOCK BLK1.
INITIALIZATION.
ABC = 'Selection Criteria:'.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_LAND1.
PERFORM VALUE_REQUEST_LAND1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_SPRAS.
PERFORM VALUE_REQUEST_SPRAS.
*& Form VALUE_REQUEST_land1
FORM VALUE_REQUEST_LAND1.
*---- Reading the Screen values.
DATA: LT_DYNPFIELDS LIKE DYNPREAD OCCURS 0 WITH HEADER LINE,
LV_DYNAME LIKE D020S-PROG,
LV_DYNUMB LIKE D020S-DNUM.
*-------Append field which you want to read from the screen
LV_DYNAME = SY-REPID.
LV_DYNUMB = SY-DYNNR.
LT_DYNPFIELDS-FIELDNAME = 'P_SPRAS'.
APPEND LT_DYNPFIELDS.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = LV_DYNAME
DYNUMB = LV_DYNUMB
TABLES
DYNPFIELDS = LT_DYNPFIELDS.
SELECT * FROM T005T
INTO TABLE IT_T005T
WHERE SPRAS = P_SPRAS.
REFRESH: HELPVAL1, VALUE_TAB.
CLEAR: HELPVAL1, VALUE_TAB, GIVEN_VALUE, VALUE.
*---- Append field name for the columns in the help popup
HELPVAL1-TABNAME = 'T005T' .
HELPVAL1-FIELDNAME = 'LAND1' .
HELPVAL1-SELECTFLAG = 'X' . " will return the value on the screen
APPEND HELPVAL1 .
CLEAR HELPVAL1 .
HELPVAL1-TABNAME = 'T005T' .
HELPVAL1-FIELDNAME = 'LANDX' .
HELPVAL1-SELECTFLAG = ' ' .
APPEND HELPVAL1 .
CLEAR HELPVAL1 .
LOOP AT IT_T005T.
VALUE_TAB = IT_T005T-LAND1.
APPEND VALUE_TAB.
VALUE_TAB = IT_T005T-LANDX.
APPEND VALUE_TAB.
ENDLOOP.
GIVEN_VALUE = P_LAND1.
CALL FUNCTION 'HELP_VALUES_GET_WITH_VALUE'
EXPORTING
DISPLAY = SPACE
GIVEN_VALUE = GIVEN_VALUE
IMPORTING
SELECT_VALUE = VALUE
TABLES
FIELDS = HELPVAL1
VALUETAB = VALUE_TAB.
IF NOT VALUE IS INITIAL.
P_LAND1 = VALUE. " Assing value to the parameter
ENDIF.
ENDFORM. " VALUE_REQUEST_land1
*& Form VALUE_REQUEST_SPRAS
FORM VALUE_REQUEST_SPRAS.
REFRESH: HELPVAL1, VALUE_TAB.
CLEAR: HELPVAL1, VALUE_TAB, GIVEN_VALUE, VALUE.
HELPVAL1-TABNAME = 'T002T' .
HELPVAL1-FIELDNAME = 'SPRSL' .
HELPVAL1-SELECTFLAG = 'X' .
APPEND HELPVAL1 .
CLEAR HELPVAL1 .
HELPVAL1-TABNAME = 'T002T' .
HELPVAL1-FIELDNAME = 'SPTXT' .
HELPVAL1-SELECTFLAG = ' ' .
APPEND HELPVAL1 .
CLEAR HELPVAL1 .
SELECT * FROM T002T
INTO TABLE IT_T002T
WHERE SPRAS = SY-LANGU.
LOOP AT IT_T002T.
VALUE_TAB = IT_T002T-SPRSL.
APPEND VALUE_TAB.
VALUE_TAB = IT_T002T-SPTXT.
APPEND VALUE_TAB.
ENDLOOP.
GIVEN_VALUE = P_SPRAS.
CALL FUNCTION 'HELP_VALUES_GET_WITH_VALUE'
EXPORTING
DISPLAY = SPACE
GIVEN_VALUE = GIVEN_VALUE
IMPORTING
SELECT_VALUE = VALUE
TABLES
FIELDS = HELPVAL1
VALUETAB = VALUE_TAB.
IF NOT VALUE IS INITIAL.
P_SPRAS = VALUE.
ENDIF.
ENDFORM. " VALUE_REQUEST_SPRAS -
Please suggest how can we place chart series label evenly in Pie Chart of SSRS 2008
Could you please suggest how can we place chart series label value evenly so that it doesnot overlap with each other and user can view the data properly.
Please find the attached screenshot for the same.Hi SubhadipRoy,
As Satish posted, the solution can achieve your goal. In addition, you can right click the Chart Series Labels and Series Label Properties, and then select Number in the left pane, finally select Scientific below the Category option. The data label may not
overlay. Or you can enlarge the chart.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support
Maybe you are looking for
-
External Display wil not work when I close my MacBook Pro
Help! I'm using a Vizio LCD with Bluetooth Keyboard and Mouse and I'm trying to use just the display with the MacBook Closed and Powered, but as soon as I do that the Screen on the VIzio dies. I worked for a while but now it won't work anymore. I can
-
How to manage a large podcast page on a non-Apple hosting service?
Hi, I host a webpage that I built for my church with DreamHost. My question is not about how to get the site there (It has been up and running for quite a while now), but how to keep from uploading a very large podcast page every consecutive time I u
-
Need a safe free file converter
Adobe supprt has told me that my Adobe slideshow that was completed on a XP windows computer and saved as a dvd is not compatile with my new Window 7 computer. It is a .dat file. They told me to get a free file converter on the internet but did not m
-
Changing over to a different computer
Ok so heres the deal. My laptop that housed all of my itunes music files came across some trouble and we sent it in to the local computer store to be fixed. They told me they had to wipe clean my computer for whatever reason and promised to back up m
-
I can't see the raw thumbnail image when in download them to bridge. what is wrong
I can't see the raw thumbnail images when I download them into bridge what is wrong?