How can I plot multiple channels on the same figure?

My inputs are:
x axis : 1-D array
Y axis : 2-D array consisting of data from several channels, where every row contains data from one channel (1-D array)
I would like to plot several channels vs one with the legend etc..
Attachments:
dummy.vi ‏16 KB

I have created an example which -
- takes an independent X axis data
- takes 2D Y data
- takes 1D Y data
Displays all on an XY Graph
Do Let me know if it helps.
Sandeep
Attachments:
dummy_with_XYGraph.vi ‏46 KB

Similar Messages

How can I save multiple titles under the same DVD?

I use HandBrake to rip DVD's into iTunes. How can I save multiple titles under the same DVD? For instance, I have a Jimi Hendrix documentary that comes with special features, such as concert performances. I would like to have the main feature and the special features saved in my iTunes under the same title, perhaps as different 'tracks' (kind of like how different songs can be saved under the same album).
Is there a way for me to do this, or am I chasing phantoms?

*This response is for iPhoto 11 (v9). If you're using an earlier version, please post back and let us know. Troubleshooting steps are not the same for different versions. To find out which iPhoto you have: iPhoto Menu -> About iPhoto)*
Duplicate the photo first. (Photos -> Duplicate). This means that you will have multiple copies of the master as well as the edited version.
If you use versions like this often and wish to have only one master then you can do this with Aperture.
Regards
TD

Label Printing Using Address Book - How can I Print multiple labels of the same name?

Label Printing Using Address Book - How can I Print multiple labels of the same name?

I used to be able to print multiple copies of the same picture on one page using iphoto. There was a customise button when you went through to print and it was there somewhere. I can't see it anymore - maybe since an upgrade.
It's gone. But as a work-around, duplicate your photo (⌘D) to create as many versions as you want copies and select all at once. Then use the "Custom" print layout and set the photo size you want.
After printing, trash the added versions.

In Elements 7.0, how can I delete multiple photos at the same time?

In Adobe Photoshop Elements 7.0, how can I delete multiple photos at the same time? Please be a little specific so I can follow your instructions as I'm not real smart at computers; I'm an intermediate user. Thank you.

Shift-click the photos or Ctrl-click them to select them, then right-click one of them and choose Delete from Catalog. They will all go together.

How can I combine multiple deliveries of the same address to one shipment.

Hello Friends,
My client is sending multiple deliveires with multiple shipments to the same customer. His cost is increasingm therefore I am lookign to help him to combine all the deliveries to one shipment and one delivery.
How can I combine multiple deliveries of the same address to one shipment.
Please help me.
Regards

Of course, you can combine several deliveries into one shipment. You can set your own selection variant to select deliveries with the same ship-to party.
You cannot combine several deliveries into one delivery. The combination of deliveres is possible only when creating deliveries in VL10*.
Edited by: Harry Wu on Jun 21, 2010 4:30 AM

How can I remove multiple copies of the same song from the iTunes listing?

How can I remove multiple copies of the same song from the iTunes listing. The program seems to be picking up the same songs from, for example, my user area and my public area in the C drive

As above, Apple's official advice is here... HT2905 - How to find and remove duplicate items in your iTunes library, however it is a manual process and the article fails to explain some of the potential pitfalls.
Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created. If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin.
Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve/merge ratings, play counts and playlist membership. See this thread for background and please take note of the warning to backup your library before deduping.
(If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed)
tt2

How can I print multiple copies of the same photo onto one sheet of paper? Do I have to Duplicate the photo in iPhoto and then select them all?

How can I print multiple copies of the same photo onto one sheet of paper? Do I have to Duplicate the photo in iPhoto and then select them all?

no - you simply have to select the option to print mucliples of a photo on a page
select the photo and go to the file menu ==> print - select the printer, paper size and print size and click customize - in the tool bar click on the settings icon (the gear looking thingy) and select "multiple of the same photo per page" and the preview will reflect this option showing a full page of the selected size photos
LN

How can I combine multiple variations of the same library?

While I have become accustomed to the new Library format/function there are still things that boggle my mind. Case in point is that I now somehow have multiple versions of the same event showing up although I didn't create them. And there is also a combination of 2 separate events that I just don't understand. My current main concern/question is how to combine the duplicitous events?:
At the top you'll see "Perlick" as the Library and "Beer Cooler" as the Event. Then down below there is the "Perlick 20140502_1515_CDT". When I opened the media drive that contains the Perlick event I found a total of 3 "extra" libraries with various long titles as the one just listed. So, my question is can I somehow combine all of this into one, all-inclusive Library and if so, how?
Thanks in advance...

Hello There,
Try and use tcode VT01N.
Provide the collective shipment there
and then click on deliveries & select multiple deliveries there.
Hope it can assist you
Thanks & Regards
JP

How can you delete multiple copies of the same songs without deleting one at a time?

I have multiple copies of most of the songes in Itunes. How can I delete multiple copies without doing it one at a time?

Select/highlight more than one at a time followed by selecting Delete.

How can I open multiple instances of the same version of FF?

I understand that if I have multiple profiles, I can run different versions of FF side-by-side (like 3.6 and 4).
However, what I'm interested in is how I can launch multiple instances of the same version of FF (4, for instance) using the same profile. In other words, I want to be able to double-click the desktop icon for FF, and open a new instance, and keep doing that as many times as I want. I don't want to have a different icon and profile for each instance (too much overhead to keep a dozen+ profiles in sync).
I can always launch one FF window instance, and then keep clicking ctrl+N to launch new instances from inside it, which they all share the same profile (as I want). So, basically, I want to be able to do that from my desktop icon, rather than by having to do it with the keyboard ctrl+N sequence.

But I don't understand why whatever Firefox does when you click ctrl+N can't also be done (with some sort of command-line switch) from a desktop icon?
In other words, I clearly can create many FF instances (even if they are the same FF.exe process) by doing ctrl+n a bunch of times. Why then can't this behavior be done from a desktop icon with some parameters?
As far as I know, FF is the only browser that doesn't directly allow multiple browser instances from desktop icons. IE, Chrome, Safari, Opera, etc... all let me launch a new instance (even if they are all single process and the instances are shared within the process).

How do you plot multiple curves on the same graph when using a while loop?

I am writing a program that will plot the IV Output chracterisitcs curves for a MOSFET transistor. I have two sweep variables Vg and Vd. For each Vg valve selected, Vd is swept from its start to stop voltage creating a graph for that Vg valve. Both of the sweeps are done using while loops. Ideally I would like to display all of the Vg plots on the same graph while having the ability to do real-time graphing. Can anyone help me figure this problem out? I have attached my program. Thanks!!
Tammy
Attachments:
outputfin2.vi ‏165 KB

Hi Tammy & Tica T,
As far as I see it - this thread is a very bad version of already existing bad version......
http://forums.ni.com/ni/board/message?board.id=170&message.id=127857
I expected, that an Applications Engineer from NI knows something about a Transistor and how an Output characteristic looks like !! Take a look to a typical Transistor Datasheet ( e.g. n-channel MOSFET) - you will see, that there is no relation of ID vs Time like in your example ( values vs time ) but IDrain vs VDrain at different VGate's ( no relation to Mr. Bill Gates ).
Find attached a vi, that in general does what you need - drawing of curves vs x-axis (XY-graph in use) - in test_sweep.zip. And that you geet an impression, how it might be done ...... dynamic Output characteristic of a Transistor with Standard Equipment of a Lab ( Scope + Generator + Power Supply ) find in addition a Frontpanel - picture. One of the interesting points here is - the self-heating effect; visible on ch3 of scope - 5µs Pulse is already a very long time...... This measurement was done in order to compare with our own Transistors.........
Hope this helps a little bit to understand, what we are talking about.
Regards
Werner
Attachments:
test_sweep.zip ‏358 KB
dynamic Transistor char.png ‏65 KB

How can I have multiple users edit the same calendar?

I work on a team of about a dozen people. We already share individual work calendars through iCloud. We want to create a master iCal calendar that allows us to display our various deadlines on a given project. We want the people to be able to edit their own deadlines.
How can I create a calendar that offers multiple user Edit permission?
Thanks!

Go to this page:
http://help.apple.com/icloud/#mm6b1a9479
and expand 'Share a calendar privately'.

How can I map multiple sourcelines of the same position into 1 targetline?

Hi all,
I have a mapping problem in XI. I have no idea how to do the following mapping in the IR. My inputfile contains of 1 headerline and mulitple positions, and it has got multiple lines per position (with different data in it). The targetfile has got 1 headerline and multiple positionslines in which I have to "merge" the data from mulitple source-positionlines. It looks like this:
source structure:
headerdata
position1 part1 (posnr, article number, quantity, articletype,...)
position1 part2 (posnr, article price, payment conditions,...)
position1 part3 (posnr, route,...)
position2 part1
etc
target-structure:
headerdata
position1 (posnr, articlenr, quantity, articletype,price, payment conditions, route)
position2 (same)
position3 (same)
etc
Now I have to map part1,2 and 3 of the source structure to the 1 and the same target-line. I guess I would need some kind of lookup of the positionnumber in my message-mapping. But how do I do this? Copying the targetline 3 times is not an option as the target-utility only accepts the structure as described above....
Hope anybody van help
Thanks,
William

Hi,
U can do it with UDF but it is more simpler with normal graphical mapping refer the following steps.
1) To map header node for your example (position1) refer the following steps,
posnr --> RemoveContext --> sort --> splitByValue(valueChange) --> CollapseContext --> position1
2) for posnr in target side also u can use same mapping with some change i.e.
posnr --> RemoveContext --> sort --> splitByValue(valueChange) --> CollapseContext > splitByValue(EachValue)>posnr.
3) For other node like articlenr, quantity, articletype,price, payment conditions, route refer the following mapping.
1st do this.
posnr --> RemoveContext --> sort --> splitByValue(valueChange) --> CollapseContext --> splitByValue(EachValue).
then take IfWithOutElse function give 1st input as output of CollapseContext
2nd input is value like articlenr, quantity, articletype,price, payment conditions or route(one of it) --> FormatByExample(using posnr --> RemoveContext --> sort --> splitByValue(valueChange)) node
Output of IfWithOutElse give to splitByValue(EachValue)
Then give it to Target field.
Regards,
Rohit.
reward points if helpful

How can I print multiple photos on the same page from iPhoto?

I want to print multiple pictures on one paper. How can I do that from iPhoto? If I select multiple photos they are printed on separate pages.

Select the photos and click print - select the printer, paper size and print size (be sure that they will physically fit on the paper) and click customize - on the resulting page click on the settings icon - the gear looking thingy at the bottom - and in the selection window set print multiple photos on a page - the preview should reflect this change - and click print again to continue
LN

How can i record 2 channels at the same time?

I want to record a mix using my decks. I would like to record the two channels from the two decks separately (so if I fluff a mix I can have another go at it).
How can I set this up? My mixer only has one channel output, so would I need a different mixer or is there a way I can rig it up with the Mac and GarageBand?
iMac24 Mac OS X (10.4.8)

sorry if i wasn't clear. Yes it does have a stereo out put but my idea is to record the left deck as one track and the right deck as another. Then if I stuff a mix up I could pay back one track and record the second again.

How can I plot multiple channels on the same figure?

Similar Messages

Maybe you are looking for