How can i poster print using my officejet pro 8600plus? my 8500 had this feature.

how can i poster print using my officejet pro 8600plus? my 8500 had this feature.
This question was solved.
View Solution.

Yes, the Officejet 8500 driver works with full capability on the Officejet 8600.
You do not delete the 8600 port, you just right click on the Officejet 8600, select Printer Properties, Ports and just find which port the 8600 is using.  After you write this down click Cancel to exit this part.  I would suggest you leave the Officejet 8600 driver installed, you can install the version with the Officejet 8500 driver and just select the printer you want at print time.
Bob Headrick,  HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

  • HT1893 How can I still print using a 'hp designjet 120nr (C7791B)' with OS X 10.8.3?

    How can I still print using a 'hp designjet 120nr (C7791B)' with OS X 10.8.3? I cannot get the drivers to work?

    bdmorgan wrote:
    Thank you once again Matthew. I understand the importance of being thourough and followed your instruction exactly. I really thought that this would solve it and was ready to click 'This solved my question'. However I still have the same print options as before, no 'A1 on the roll'.
    Although, when I copied:
    'sudo pkgutil --forget org.linuxprinting.foomatic-rip'
    into Terminal it did say somehting along the lines of 'nothing found' (sorry I didnt copy the text). Could this be part of the issue?
    In this case the instructions were incorrect.  I forgot that the uninstaller would run that command.  The reason for that command was to let the system know that foomatic-rip 4.0.6 had been removed.  I am sure that you were able to then install foomatic-rip version 3.43.2.15.  There are two ways to confirm that the older version is now installed.  First, if you can print at all, it is present.  You could also copy and paste the following command in the Terminal.  It should respond with the version that is installed:
    pkgutil --pkg-info org.linuxprinting.foomatic-rip | grep version
    Do I need to change the PPD at all?
    There is no need to change the PPD.  PPDs are reflective of the software (drivers) that are called from the PPD.  You can put anything you want in the PPD.  If that capability is not in the driver, having it in the PPD won't make it work.
    Setting a job to print from A1 Roll Paper is a two step process.  First you select the Paper Size which is A1.
    Then look under the pop up menu below Paper Size for an item called Paper Feed.
    Select Paper Feed.  Then you will be able to select where/how the paper is being fed to the printer.  This is where you can choose Roll Paper (Cut) or Roll Paper (No Cut) among other choices.
    Other drivers may have A1 Roll Paper listed under Paper Size.  Perhaps that is how the HP driver was.  There would still have had to be a place, then to check whether or not you wanted the paper to be cut and/or whether you were feeding sheets of paper from one of the other paths.
    Let us know if you can find all the options now and that you are able to keep your normal workflow.

  • HT4356 My printer is HP Officejet Pro 8000 A809 Series and I don't see it listed. How can I print from iPad?

    My printer is HP Officejet Pro 8000 A809 Series and I don't see it listed. How can I print from iPad?

    You can use 3rd party software such as Print n Share if you have a PC or Printopia if you have a Mac.
    Or you can check HPs site and see what they have available.

  • My setup: iMac hardline to Canon i960 printer. Issue: endless printing of the same document. The printer window states that the pinter is in use and there is nothing listed in the Print Queue.  How can I stop printing the document?

    My setup: iMac hardline to Canon i960 printer. Issue: endless printing of the same document. The printer window states that the pinter is in use and there is nothing listed in the Print Queue.  How can I stop printing the document?

    Soution: Delete the printer and add the same printer back in, therefore creating a new print queue.

  • How can we post data from CRM to SAP using ABAP proxies???

    Hi ,
      Can anyone hep me to create interface for the following scenario How can we post data from CRM to SAP using ABAP proxies???, can I find any document ???????
    Thanks in advance
    Andy

    Andy,
    Please look at these weblogs.
    /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
    /people/ravikumar.allampallam/blog/2005/03/03/creating-purchase-order-idoc-through-xi
    /people/siva.maranani/blog/2005/04/03/abap-server-proxies
    /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
    These should give a good idea about implementing Proxies.
    Regards,
    Ravi

  • How can I download the Printer Manuel for OfficeJet Pro 8500A. Thank You.

    How can I download the Printer Manuel for OfficeJet Pro 8500A.  The easy way.  Thank You.
    This question was solved.
    View Solution.

    Hi,
    You can download the User Guide on the link below.
    http://h10032.www1.hp.com/ctg/Manual/c02668142.pdf
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • How do i get my nokia n8 to print to my officejet pro 8500a?

    Hello
    Can anyone tell me how to get my Nokia N8 mobile phone to print a photo using HP Officejet Pro 8500A?
    I have got the wireless connection enabled, but when I select the photo on the phone and click on Print, via Bluetooth connection, the Printer can't be found.
    Any suggestions would be greatly appreciated!!

    The Officejet 8500a does not support bluetooth, but you can download an app called HP iPrint Photo and use that, here is a link with information on this app.
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c01923321&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US​...
    I was an HP employee
    If I have helped you solve your issue please mark it as solved
    **Say Thanks By Clicking on the Kudos Star**

  • How can i avoid printing full pages?

    How can I avoid printing full pages when printing a photo from my iphone to my hp envy?

    Hi,
    While pritning with Apple Airprint, the image will print as is..
    You may find some more customization steps by using the HP Print Home & Biz app which allow some more customization of the printout:
    Follow the steps below to find how to get the app:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02775166&cc=us&dlc=en&lc=en&product=3692888&tmp...
    Below you may find some more customization options of the app:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01930282&cc=us&dlc=en&lc=en&product=3692888&tmp...
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • How do I Poster print with photosmart 7520

    I am a poster designer and I have used poster printing with all of my Hp printers, but my Hp Photosmart 7520. How do I Poster print with photosmart 7520 using eprint and if not can I use use the USB cord instead for poster printing?
    This question was solved.
    View Solution.

    The steps are quite the same, beside one different step during the dialog:
    From Devices and Printers click the Add  a Printer button, then select a Local Printer.
    Keep the preseleted LPT port amd click on Next.
    Select HP from the Manufacturer pane and then select the HP Deskjet 6940 Series from the Printers list.
    Note: if the model is not listed, click the Windows Update button, allow it several minutes to complete and then it should be listed.
    Finish the Wizard and confirm the changes.
    Right click teh newly added 6940 and select Printer Porperties, open the ports tab and select the port with the otiginal printer model listed within the Printer column (e.g. HP Photosmart 7520), then click on OK.
    Poster Printing should now be available within the Finishing tab (Under Pages per sheet and Posters) by using the HP Deskjet 6940 printer.
    Please let me know of any issue,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • How can I share printers using a non apple router, imac to ipad?

    Newbie in osx, but experienced in linux.
    My new imac has 3 printers setup for sharing, but ipad 2 / iphone 4 fail to see them.  I am using the belkin router that I owned already, instead of buying an Airport.
    I found a solution at askubuntu.com Q 26130 at http://askubuntu.com/questions/26130/how-can-share-my-printer-so-that-i-can-use- it-with-airprint
    I setup a linux machine on the network, with no physical connection to any printer. The 1st, an hp fax psc has a usb to imac, as the 2nd, an hp psc, the 3rd printer is an epson wireless, which is only connected on the network by wifi to the belkin router. I'm certain the imac "sharing" is properly setup, because the linux machine has no trouble finding the printers.  Only the ipad / iphone have a problem.
    Once I put the linux machine (with the above changes) on the network, everything works as desired.  I can print on the ipad / iphone to any of the 3 printers, using the built in Airport printer routine (not the epson or hp apps). And the imax and linux machines can also print on all 3.
    So, I suspect the imac isn't telling the router to display the printers on the network in a way that iOS can see them. I know it would work if I owned an Airport, but I'd rather not spend that much right now.
    I'm sure someone knowledgable in OSX might have an idea where to stick an Airport definition file, created from the python script in askubuntu, that could solve this without having to run the linux laptop all the time.  Any ideas?
    TIA

    It's possible to use free software (Virtualbox and Ubuntu) to fix the broken iOS 5 Airprint printing with non supported printers.  Here's a fix that works on my imac, but should also work on even a windows pc.
    My setup is a lion imac with 2 non-airprint supported usb printers attached, a belkin wifi router that provides network connectivity for my imac, ipad, and iphone.
    Install ubuntu 11.10 in a virtualbox vm.  Specify to use the "Bridged Adapter" with "en1: WiFi (AirPort)" for the network hardware.  Make sure the imac's usb printers are setup with sharing.  On ubuntu, select System Settings > Printers and add your imac's shared printers to the list.  Then start ubuntu's firefox and set "localhost:631" in the address. On the administration tab, under the Server section, check "Share printers connected to this system" and hit Change Settings button to activate it.  Go back to ubuntu's printer setup, and right click on each printer and check that the properties Policies tab does not have any messages about it being unshared. If so, then go back to firefox and make sure the Server sharing checkbox is enabled. It may help to reboot.
    Fire up virtualbox to be able to use AirPort printing to your imac's usb printers, when you want to print from the iphone or ipad. This also works on iOS 5.
    Only problem is error message from iphone to check the printer for errors, even though it actually prints ok.
    references: 
    http://askubuntu.com/questions/26130/how-can-share-my-printer-so-that-i-can-use- it-with-airprint
    https://lists.ubuntu.com/archives/ubuntu-devel/2011-June/033611.html

  • How can I POST data within the same page if I have a A HREF -tag as input?

    How can I POST data within the same page if I have a <A HREF>-tag as input? I want the user to click on a line of text (from a database) and then some data should be posted.

    you can use like this or call javascript fuction and submit the form
    <form method=post action="/mypage">
    cnmsdesign.doc     
    </form>

  • Re: How can I post an image?

    Merging the hints, how does this look?
    Showing an image in Apple Discussions requires two things.
    1. The image has to exist and be accessible from a working server somewhere.
    2. Then the image can be referenced in html and will appear in your post.
    1. To achieve the first you need to register on one of the many free web photo hosting sites. An example of one would be Flicker. (If you have your own web site you can of course host your picture there.)
    Having taken a snapshot of the thing in question (the image), perhaps by using the Grab application on your Mac, you upload the image to your photo hosting site.
    You'll then need to get its URL from the site. It might be easy to see or you might have to read the site's FAQ for those details, as there are differences between sites.
    Easier still, if you are using Safari or Firefox right clicking (or Control click with a one button mouse) on the uploaded image will copy the link for you.
    It will have a form like this:
    http://farm3.static.flickr.com/2186/24541163585b68ff68b8s.jpg
    When you find it, open a new tab in your browser and paste it into it, to check that it displays and is therefore the correct URL for the image.
    2. To add this image to your post here on Apple Discussions, place an exclamation point before and after the link, illustrated as,
    !http://farm3.static.flickr.com/2186/24541163585b68ff68b8s.jpg&#033;
    which produces the image in the post.
    !http://farm3.static.flickr.com/2186/24541163585b68ff68b8s.jpg!
    An alternate html format is;
    <img src="http://source.address.of.image.jpg"/>

    How can I post an image? (Revision 2. Thanks to rrcharles)
    Showing an image in Apple Discussions requires two things.
    1. The image has to exist and be accessible from a working server somewhere.
    2. Then the image can be referenced in html and will appear in your post.
    1. To achieve the first you need to register on one of the many free web photo hosting sites. An example of one would be Flicker.
    Having taken a snapshot of the thing in question (the image), perhaps by using the Grab application on your Mac, you upload the image to your photo hosting site.
    You'll then need to get its URL from the site. It might be easy to see or you might have to read the site's FAQ for those details, as there are differences between sites.
    Easier still, if you are using Safari or Firefox right clicking (or Control click with a one button mouse) on the uploaded image will copy the link for you.
    It will have a form like this:
    http://farm3.static.flickr.com/2186/24541163585b68ff68b8s.jpg
    When you find it, open a new tab in your browser and paste it into it, to check that it displays and is therefore the correct URL for the image.
    2. To add this image to your post here on Apple Discussions, place an exclamation point before and after the link, illustrated as,
    !http://farm3.static.flickr.com/2186/24541163585b68ff68b8s.jpg&#033;
    which produces the image in the post.
    !http://farm3.static.flickr.com/2186/24541163585b68ff68b8s.jpg!

  • How can you post comments during signal aquisition?

    How can you post comments during signal aquisition? For example, while acquiring your signal, you want to post a comment which the temperature reads at "30 seconds" from your relative start time (t=34 sec into recording)
    I have the LE package where events, alarms, etc cannot be used. Are there other ways that the user can mark an "event" during recording?

    Hey hkim,
    If you know how long it will be before you want a message to pop up you can simply include a sequence structure and in the first sequence have a wait time of your desired length and have the message pop up and display in the second sequence frame. 
    Hope This Helps,
    Doug B
    Applications Engineer
    National Instruments

  • Can the mac air print to HP OfficeJet Pro 8600 Plus Wireless e-All-in-One?

    Can the mac air print to HP OfficeJet Pro 8600 plus Wireless e-all-in-one?

    AirPrint is an iOS 5 protocol.  It is not used on the Mac or Lion.  What you *can* do is add the wireless printer to you network and print from the mac using that.

  • How can I post a simple message in the User Forum's page, immediately after logging in ?

    I had earlier asked a question re: including Merriam-Webster online dictionary into the list of search engines in the text area to the right of the location bar. I received a very helpful answer from cor-el, using which, I was able to include both the Dictionary and Thesaurus into the said list.
    I WISH TO THANK core-el SINCERELY FOR THIS HELP.
    The question is as follows:
    How can I post such messages directly in the Users Forum's pge?
    - - S.Rajaram

    what is your requirement can you please confirm.
    Regards
    Shobhit S

Maybe you are looking for

  • I cannot open PDF files with my Mountain Lion system. What APP's do I need?

    What Apps do I need  to open PDF files with Mt. Lion installed?

  • How to create rule based on Reply-To address

    Hi, I'm just switching to mac from ubuntu in my workplace. I received two mailing lists, any mail have the same Reply-To: header for each mailing list. It's possible to automatically move that mail to another mail folder in Thunderbird, by using rule

  • Applications/Clean Install Question

    I going to do a clean install. My MB is almost brand new, so there isn't any data I need or any other applications that I downloaded that I need from Tiger. So I don't need to back up my HD right? With clean install, when its finished, will it have a

  • Using new Extreme N in mixed environment, seems slower than plain old G...

    I got a new Extreme N couple days ago. Installed it as the main base, with an older Airport Extreme and an Express as WDS stations. My MacBook Pro does not have N hardware in it (grrrr, don't get me started . But my wife's MacBook does. I got the N b

  • Automatic Movements

    Dears, We have created one plant C000. We use this plant only to take account of some activity of extraction of raw materials. We must move materials from this plant to another plant T000 where we have the production site. But first we have to load i