How can I prevent my previous login strings from showing when I starting typing. I'd rather the field stay blank and not start to fill in, based on previous entries.

I don't know what setting to change so that when I start typing my login (to an email account, etc), the previous entries do not show up. I want the field to start out and stay blank, and have me type the whoe string
== This happened ==
Every time Firefox opened
== has been, all along

Clear the Search and Form History, under Tools > Clear Recent History.
And, then turn off the Search and Form History so it won't save it anymore, in Tools > Options >> Privacy - select ''Use custom settings for history'', then un-select Search and Form History

Similar Messages

How can I prevent a memory flow error from occuring when using 3D contour plots?

After displaying a single contour plot a number of times, LabVIEW crashes and reports a memory overflow error. I only load a single 2D array, never storing previouls ones. I always index the data for contour plot 0, and don't explicitly store multiple 2D arrays in any buffer, such as appending data to a shift register. There appears to be some sort of memory leak in LV when using this feature. Is there a programatic way to flush the stored data in a contour plot prior to displaying the next 2D array of data?

Hello MicTomReiSr,
Is this in the LabVIEW development environment? Are you making changes to the code and then running the VI? Does the plot contain default data? Is the indicator cleared when the program stops? The Plot Clean Data method may be what you're looking for.
Remember that the development environment maintains an undo history of the changes you've made, and copies both the block diagram and FP contents each time. If you have a lot of data displayed on the front panel you end up copying it multiple times. This isn't a problem unless you're actively editing the VI in question.
If you do need to edit and run the VI at the same time (perfectly reasonable, although you might want to consider a 64-bit installation or more RAM if you commonly work with resource-intensive data types like 3D plots) try reducing the Undo history length (Tools>>Options), although be aware that you won't be able to back up as many steps.
Regards,
Tom L.

How can I prevent my new Mac Air from freezing in Safari

How can I prevent my new Mac Air from freezing in while using Safari?

Hi nainmom,
Thanks for visiting Apple Support Communities.
I recommend starting with these steps if your iPod nano is not recognized by your Mac:
iPod not recognized in iTunes and Mac desktop
http://support.apple.com/kb/ts1410
Best,
Jeremy

HT1338 How can i use my data on windows or mac when i use one of them in the same time?

Hi,
i have a Mac book with 2 operating system, ( Windows& mac). How can i use my data on windows or mac when i use one of them in the same time?
Thank you

The following article(s) may help you.
Resolving duplicate calendars
Resolving duplicate contacts

How can i sync videos to my iphone 5 using Itunes 11. i also tried to convert the videos to mp4 and drag and drop the file in itunes but still i cant see videos in itunes library.

how can i sync videos to my iphone 5 using Itunes 11. i also tried to convert the videos to mp4 and drag and drop the file in itunes but still i cant see videos in itunes library.

Copied from this link.
http://www.apple.com/iphone/specs.html
Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
There are 3rd party utilities available that "rip" content into a compatible format - most include an iPod and/or iPhone format selection. If a video plays in iTunes, iTunes includes an option to convert a selection for iPod/iPhone.

How can I recover a delete accidently genre from my playlist? It's all gone even the genre title

How can I recover a delete accidently genre from my playlist? It's all gone even the genre title

As long as you don't delete the trash, the files should be recoverable.
I suspect using the Put Back command could take a long time, so be patient.
If your Time Machine backups are mixed with your daughter's backups you might want to buy a larger drive and move the Time Machine files to the new drive.
Regarding missing photos in iPhoto...There might be options to rebuild/recover that data from iPhoto rather than trying to revert to a Time Machine backup.
Check out this third party app, iPhoto Library Manager. It has a demo.
http://www.fatcatsoftware.com/iplm/
Options for a larger drive.
I like the Seagate USB 3.0 Backup plus drives. Works on USB 2.0 ports. They come formatted for PC but easy to format in Disk Utility.
I don't recommend Western Digital because of the boot problem with some of their drives.
LaCie makes good drives.
All Mac formatted drives will cost more and it’s easy to reformat with Disk Utility. Do not use the software that comes with the drives. It’s recommended that you use Apple’s Disk Utility.
Prices vary but this gives you an idea of what you’ll find. As you notice the second and third TB is usually only $15 more per TB. Normally, you’ll find these prices but right now the 1T is more than the 2T
Seagate Backup Plus 1 TB USB 3.0 $85
Seagate Backup Plus 2 TB USB 3.0 $99
Seagate Backup Plus 3 TB USB 3.0 $115
I have seen the 3T on sale for $99.
Locally, Best Buy seems to have the best prices.

HT201317 New phone: lost old phone in a fire. How can I access my photos on iCloud from my old phone? In settings I see the storage for BOTH phones. They are separate but same account. Can I access iCloud through PC or is the info now useless since phone

New phone: lost old phone in a fire. How can I access my photos on iCloud from my old phone? In settings I see the storage for BOTH phones. They are separate but same account. Can I access iCloud through PC or is the info now useless since phone is gone?

What a crappy design. This is where Android is so much better. It seems to me like you have no control over your iPhone. It does whatever Apple has designed it to do without asking you first. On Android you can actually go in see all folders, document files, photo files etc and you have so much more control of everything. Apple s..cks!

Every time I open Mail it fails to respond, the windows stay blank and I get the beach ball and can only close it by force closing. Any ideas?

Every time I open Mail on my Macbook Pro, which is only a couple of weeks old, it fails to open, the windows stay blank and I get the beach ball. The only way I can get it to close is to force it using the command alt esc buttons. Any ideas?

Hi Elijahcross,
If you are having issues with iTunes freezing shortly after opening, you may find the troubleshooting in the following article helpful:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Regards,
- Brenden

How can I prevent a neighbour's network from knocking mine out?

recently my powerbook has begun to pick up on my neighbour's belkin54g network and at the same time i cannot connect to my own network, or rather my own network appears dead.
how can i remedy this?
could changing the channel used by my airport extreme base station solve it? and if so how do i do it?

You should test out the following channels:
1, 6, 11 (and auto if you're feeling saucy).
Unfortunately, the automatic channel selection isn't a
good solution. If you start up an AEBS without all your
neighbour's wireless network up, then this automatic
selection mechanism won't be able to choose a right
channel.
The best way to build a wireless network running
smoothly on the long run is as follows:
- download iStumbler or MacStumbler on a portable,
- walk with this portable through all the places
where you want to use your wireless network,
- do it again for all the period of times were your
neighbours may also use a wireless network (mine do it
late in the evening),
- once you have collected all the channels your neighbours
use, select one which will be 3 channels away of all of
them if possible. If not select one channel which will be
as far as possible of all of your neighbours channels,
- finally configure your AEBS to use this best channel.
For your information, the rule of channels 1, 6 and 11 is
coming from the original 802.11b (also named Wi-Fi). This
rule was correct for electronic equipment which weren't
exactly clean on the border of their defined bandwidth
(22 MHz).
This rule hasn't to be followed anymore.
A channel use design based on channels 1, 5, 9, 13 does
work perfectly well with a lot of AEBS in the same building
and a lot of Mac and PC connected.
dan

How can i see videos sync with itunes from my computer? Wich appl shoud I use? I have 4S and after synced I can´t find them in my iphone

Olders iphones used the music aplication, but with the new IOS i don´t know how can i play them

Already Solved Fooled myself sorry, with the video app that comes with de iphone and I deleted by mistake!

HT5661 how can i deactivate my dons iphone information from my daughters new touch? if I wipe the touch will the icloud st

The issue is not selling. We bought our daughter a new ipod touch and when i went to activate it i entered ny apple ID whichi is the ID on my sons iphone 5. can I deactivate my daughters account ( earase) her ipod without deleting info from the iphone? For example, contacts are connected. I make a change in one and it streams to the other. we created anew apple ID on the touch but it does not stream across the programs, i.e. facetime, icloud.

You can delete the existing iCloud account from the iPod touch by going to Settings>iCloud, scroll down and tap Delete Account, then provide the password when prompted and choose Delete from My iPod to delete your son's iCloud data from her iPod Touch. This only deletes the account and iCloud data from her iPod, not from iCloud. Your son's iPhone will not be effected by this. You can then sign back in with a separate ID to create a separate iCloud account for her iPod.
If you need to change the ID for iMessage, go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with a separate ID. Then do the same thing in Settings>FaceTime. This will keep them from getting each other's text messages and FaceTime calls.

When rotoscoping, how do I delete the background of a video so that when I import it into final cut, the background is transparent and not black or white?

Hello there,
I am new to after effects.
I'm currently working on some footage of a face talking. I have used the rotobrush to single out just the lips moving and have deleted the background. However, when I delete the background it automatically changes the background to a solid black.
The effect i'm looking for is more something of the effect of a PNG in photoshop - no background so that when it is imported into a movie, the lips with be free standing over other footage so that the oner footage will be shown behind the moving image of the lips..
I have looked at multiple tutorials and threads and found nothing that helps with my problem - if there is one, I apologise, I have just spent so long looking and thought here was the best place to come.
If anyone can give me any advice it would be very greatly appreciated - Thankyou!
BJH

First, check to make sure you actually HAVE transparency by doing one of three things: change the comp's background to something other than black, click on the button at the bottom of the comp window to view the alpha channel, or click the button on the bottom of the comp window to reveal the familiar Photoshop checkerboard background.
Next, select a codec that supports alpha channels -- in Quicktime-Land, that would be Animation, PNG or Prores 4444. For FCP, use ProRes if you can.
After that add the comp to the AE Render Queue. In the output module, select RGB+Alpha, Millions (or trillions) Of Colors +, and Straight, i.e. not premultiplied. If you absolutely MUST have audio (I personally have little use for it), check the appropriate check box.
Finally, save the project and hit the render button. DO NOT save the project again after rendering; instead, go file>Revert. That way, if you have one of those Homer Simpson "DOH!" moments where you realize you made a mistake, you simply delete the rendered file, make corrections, and you're all set to re-render.

How can I prevent my Camera Archive import from being interrupted by timecode breaks?

I'm trying to create Camera Archives from my old mini-dv tapes. I have a Sony Handycam DCR-TRV22 connected via FireWire. When I start the Camera Archive import process, everything is fine for a while but then the process stops with a message about a break in the timecode preventing the archiving from completing.
Solutions to this problem I've seen online relied on changing import preferences in Final Cut 7. Unfortunately, I only have Final Cut Pro X and I'm not sure how to control this setting.
I don't really care about timecodes, I just want to dump the entire tape to disk so I have a backup of the tape but the timecode break is interrupting the process and making me get involved a lot more often during the import process.
Does anyone know how to force Final Cut Pro X to push through timecode breaks in a Camera Archive import?

To clarify, this problem is not simply making me get involved more, but is preventing the Camera Archive operation from completing.

How can i prevent my Cinema Display 23in From disconnecting my external hard drive?

I have a mid 2010 Macbook pro 13'' connected to a 23'' Cinema Display and i have an external harddrive connected to the computer through the display to keep cord and clutter clear and also that way i dont have to hook up more than one USB cable when connecting. Every time the computer goes to sleep the external hard drive gets disconnected improperly without ejecting. This is annoying because if i have a document open that is drawing from the harddrive when it does to sleep i risk loosing the file. Is there any setting i can change or way that i can get around this? maybe i shouldnt let it sleep or the display cant turn off? Any input is greatly appreciated. THANKS!

You copy the library that holds the events and projects.

How can I prevent my iOS 7 phone from hitting buttons on my face when I'm talking?

I love iOS 7 but I am having one major recurring issue. My hardware is an iPhoen 4S and I have updated to iOS 7.0.2. While making calls my face is regularly hitting the number key, or the speakerphone key, face time, etc...
This is probably less of a support issue and more of a request for a bug fix. The old iOS turned down the sensitivity automatically when a user put the phone to their face, obviously that's not happening here.
Thanks!

http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
Read the user guide

How can I prevent my previous login strings from showing when I starting typing. I'd rather the field stay blank and not start to fill in, based on previous entries.

Similar Messages

Maybe you are looking for