How can I print a pdf in the actual size with a page border?

How can I print a pdf in the actual size with a page border? (2 pages per sheet preferred)
I usually print pdfs of books at a copy shop and they turn out fine.
The problem comes when I try to print the same books at home.
I use Adobe Acrobat X with the same settings: "multiple pages per sheet" (2x1) and page border. But the pages are slightly shrunken when printed. I think this is because my printer can't print as closely to the margins. Still, two pages should be able to fit on one sheet in actual size. Are there any layout settings that I can play with to find a better fit, besides portrait and landscape?
If I select page scaling "none," I'm able to print the pdf in actual size, one page per sheet. But there's no option to add a page border.

I have a test with some questions (multiple choice, FIB, matching, etc). I have just one button to submit all the answers, and after submiting the student can see his score and review the test to know where he failed. He can't answer again. However, he can change the answer multiple times before submiting.
"if i turn on success/failure captions the student will see them while answering" - before submitting
"if i turn them off he wont know what's the right answer" - after submitting
My results page is the default. I didn't use any variable. When i go to the results page after reviewing the test all the entry boxes are "wrong".

Similar Messages

  • How can I create one pdf from a FrameMaker Book with mixed page sizes.

    Looking for an easier way to create one pdf from a FrameMaker book that has files with different pages sizes; letter and tabloid.
    So far, I have not been able to find a way to set up the Adobe PDF printer or Distiller to read the page size from the source files in the book and then create one pdf with the appropriate page sizes based on the file sizes in the FrameMaker book. I can create a pdf of the book using a multi-step process where I create a pdf for each page size and then combine them into one file. This is a lot of work.
    Is there a way to set the Adobe PDF printer where it reads page size from the source files and then creates one pdf with a mixed page sizes?
    Using FrameMaker 7 and 10 and Acrobat X Pro.
    Thanks for any suggestions

    http://forums.adobe.com/message/4013068#4013068
    http://forums.adobe.com/message/3519366#3519366
    http://forums.adobe.com/thread/485331?tstart=0

  • How can I combine separate pdf documents into one document with several pages

    I have been using Preview to separate pdf pages into separate pdf documents. How might I do the reverse. Preview appears to have combined the documents in the thumbnail, but will not allow saving this. It just saves the highlighted page.

    Open all the documents. Choose View > Contact Sheet. All the pages will be shown as thumbnails, separated by document. Select the pages you want in the final document and drag them into the desired order, in one document space.

  • How can I print multiple PDF files at once using Windows 7?

    How can I print multiple PDF files at once, on an HP LJ Pro 400 xcolocr printer without opening each
    one separately using Windows 7?

    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/
    I hope this helps.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • How can I print a pdf file in Windows 8?

    I'm new to Windows 8. How can I print a pdf file in Windows 8?

    Well, you can install Adobe Reader XI - not the version for Windows 8 tablets, but the one for regular PCs. This is just the same in Windows 8 as other systems, and can print. The tablet reader, which also runs on PCs, can't print.

  • How can I print a PDF document?

    How can I print a PDF document?

    That states that the PDF touch app doesnt support printing which is a technically true as it doesnt have a button/option to print from the app but doing a crtl-p (this is on a full PC version of win8 not RT) brings up the print dialogue and its prints fine.

  • How can I print to PDF on iPad like I do on laptop?

    How can I print to PDF on iPad like I do on laptop?

    You can probably get deeper answers on the Apple website because what you're asking is a general iPad question, and not particular to a Reader.
    If you have an AirPrint-equipped printer, you should just choose the Share button (arrow out of box icon), then choose Print Document.
    Here's an Apple document about AirPrint:
    AirPrint basics
    If you don't have an AirPrint printer, but another, you may be able to print to it with an app like Printer Pro. You can do a Google search on that.

  • Label Printing Using Address Book - How can I Print multiple labels of the same name?

    Label Printing Using Address Book - How can I Print multiple labels of the same name?

    I used to be able to print multiple copies of the same picture on one page using iphoto. There was a customise button when you went through to print and it was there somewhere. I can't see it anymore - maybe since an upgrade.
    It's gone. But as a work-around, duplicate your photo (⌘D) to create as many versions as you want copies and select all at once. Then use the "Custom" print layout and set the photo size you want.
    After printing, trash the added versions.

  • How can I print multiple copies of the same photo onto one sheet of paper?  Do I have to Duplicate the photo in iPhoto and then select them all?

    How can I print multiple copies of the same photo onto one sheet of paper?  Do I have to Duplicate the photo in iPhoto and then select them all?

    no - you simply have to select the option to print mucliples of a photo on a page
    select the photo and go to the file menu ==> print - select the printer, paper size and print size and click customize - in the tool bar click on the settings icon (the gear looking thingy) and select "multiple of the same photo per page" and the preview will reflect this option showing a full page of the selected size photos
    LN

  • How can i print logo in all the page

    i've created a form(SAP script) which have  five page.pls can anybody tell me how can i print logo in all the five page?

    hi,
    u can try this in
          windows
    change window type as CONST or MAIN.
    cheers,
    sam

  • Preview; How can I open multiple PDF's in one window with Preview?

    How can I open multiple PDF's in one window with Preview?
    I have gone to Previews preferences and selected 'Open groups of images in the same window' and have tried every setting imaginable and nothing works. What am I doing wrong?

    Hi, a few ways..
    http://www.monkeybreadsoftware.info/Freeware/CombinePDFs.shtml
    http://www.monkeybreadsoftware.info/Freeware/CombinePDFs.shtml
    http://www.macosxhints.com/article.php?story=20060327192826493&lsrc=osxh

  • How can I make a PDF file from each folders with layers, where each page is a each folder?

    How can I make a PDF file from each folders with layers, where each page is a each folder?

    I found an answer to my own question. A work around of sorts.
    Download Photoshop Elements 6 for Macintosh. With PSE6 I made a slide show with 550 images 1920x1200, without thumbs. I ran into one problem making the slide show. My images contained 4 images which had not ben created by Photoshop and could not be included in the slide show. Opening the images in Photoshop CS4 and re-saving them still did not make then acceptable. Not a big deal. I probably could have fixed the four images by stripping all EXIF data before opening them in Photoshop. BTW, PSE6 made the slide show in demo mode.
    I hope the bug in Photoshop CS4 will be fixed in Photoshop CS5.

  • How can I sync my contact on the macbook pro with icloud?

    How can I sync my contact on the macbook pro with icloud? iPhone & iPad sync with no problems, but not with the MacBook Pro.

    Go to iCloud in System Preferences and make sure the appropriate box is checked. You also need to be signed in.

  • My old iPad 2 is updated to ios 7.1.2 but I have a new 4 which is only compatible with 7.0.4 from setup. How can I backup my account to the new iPad with this incompatibility?

    My old iPad 2 is updated to ios 7.1.2 but I have a new 4 which is only compatible with 7.0.4 from setup. How can I backup my account to the new iPad with this incompatibility?

    What you need to do is temporarily set up your new 4. Just long enough to update the operating system. Then you can erase all content and settings - which puts it back to its out of box state, then set it up again, this time restoring it from the backup of your two.
    So, using the same Apple ID on both - just to keep things easy - set up your 4. Just basically choose 'set up as new' to activate it, then immediately update the iOS to 7.1.2.
    then erase all content and settings, which puts it back to 'llike new'...but the operating system will not reset, it'll remain 7.1.2
    Then set it up again, this time choosing to 'restore from the backup' of your 2 and your 4 will be a near clone of your two.

  • How can I write new objects to the existing file with already written objec

    Hi,
    I've got a problem in my app.
    Namely, my app stores data as objects written to the files. Everything is OK, when I write some data (objects of a class defined by me) to the file (by using writeObject method from ObjectOutputStream) and then I'm reading it sequencially by the corresponding readObject method (from ObjectInputStream).
    Problems start when I add new objects to the already existing file (to the end of this file). Then, when I'm trying to read newly written data, I get an exception:
    java.io.StreamCorruptedException
    at java.io.ObjectInputStream.readObject0(Unknown Source)
    at java.io.ObjectInputStream.readObject(Unknown Source)
    Is there any method to avoid corrupting the stream? Maybe it is a silly problem, but I really can't cope with it! How can I write new objects to the existing file with already written objects?
    If anyone of you know something about this issue, please help!
    Jai

    Here is a piece of sample codes. You can save the bytes read from the object by invoking save(byte[] b), and load the last inserted object by invoking load.
    * Created on 2004-12-23
    package com.cpic.msgbus.monitor.util.cachequeue;
    import java.io.File;
    import java.io.FileInputStream;
    import java.io.FileOutputStream;
    import java.io.IOException;
    import java.io.RandomAccessFile;
    * @author elgs This is a very high performance implemention of Cache.
    public class StackCache implements Cache
        protected long             seed    = 0;
        protected RandomAccessFile raf;
        protected int              count;
        protected String           cacheDeviceName;
        protected Adapter          adapter;
        protected long             pointer = 0;
        protected File             f;
        public StackCache(String name) throws IOException
            cacheDeviceName = name;
            f = new File(Const.cacheHome + name);
            raf = new RandomAccessFile(f, "rw");
            if (raf.length() == 0)
                raf.writeLong(0L);
         * Whne the cache file is getting large in size and may there be fragments,
         * we should do a shrink.
        public synchronized void shrink() throws IOException
            int BUF = 8192;
            long pointer = getPointer();
            long size = pointer + 4;
            File temp = new File(Const.cacheHome + getCacheDeviceName() + ".shrink");
            FileInputStream in = new FileInputStream(f);
            FileOutputStream out = new FileOutputStream(temp);
            byte[] buf = new byte[BUF];
            long runs = size / BUF;
            int mode = (int) size % BUF;
            for (long l = 0; l < runs; ++l)
                in.read(buf);
                out.write(buf);
            in.read(buf, 0, mode);
            out.write(buf, 0, mode);
            out.flush();
            out.close();
            in.close();
            raf.close();
            f.delete();
            temp.renameTo(f);
            raf = new RandomAccessFile(f, "rw");
        private synchronized long getPointer() throws IOException
            long l = raf.getFilePointer();
            raf.seek(0);
            long pointer = raf.readLong();
            raf.seek(l);
            return pointer < 8 ? 4 : pointer;
         * (non-Javadoc)
         * @see com.cpic.msgbus.monitor.util.cachequeue.Cache#load()
        public synchronized byte[] load() throws IOException
            pointer = getPointer();
            if (pointer < 8)
                return null;
            raf.seek(pointer);
            int length = raf.readInt();
            pointer = pointer - length - 4;
            raf.seek(0);
            raf.writeLong(pointer);
            byte[] b = new byte[length];
            raf.seek(pointer + 4);
            raf.read(b);
            --count;
            return b;
         * (non-Javadoc)
         * @see com.cpic.msgbus.monitor.util.cachequeue.Cache#save(byte[])
        public synchronized void save(byte[] b) throws IOException
            pointer = getPointer();
            int length = b.length;
            pointer += 4;
            raf.seek(pointer);
            raf.write(b);
            raf.writeInt(length);
            pointer = raf.getFilePointer() - 4;
            raf.seek(0);
            raf.writeLong(pointer);
            ++count;
         * (non-Javadoc)
         * @see com.cpic.msgbus.monitor.util.cachequeue.Cache#getCachedObjectsCount()
        public synchronized int getCachedObjectsCount()
            return count;
         * (non-Javadoc)
         * @see com.cpic.msgbus.monitor.util.cachequeue.Cache#getCacheDeviceName()
        public String getCacheDeviceName()
            return cacheDeviceName;
    }

Maybe you are looking for

  • Attachments and history of my emails are not seen by Windows users

    attachments and history of my emails are not seen by Windows users

  • SQL Loader - need help - any thought!

    I have a datafile with info like this, tag1,f01,f02 tag2,..... tag3,...... tag4,info1,info2,.... tag4,info1,info2,.... tag4,info1,info2,.... tag4,info1,info2,.... tag1,f01,f02 tag2,..... tag3,...... tag4,info1,info2,.... tag4,info1,info2,.... tag4,in

  • Be able to track costs and re-cost a certain material based on a serial #

    Client wants to sell a material+serial# with a certain cost, lets say $1000 If the same material+serial# is bought after 5 years at $500, then that becomes the acquisition value for that material. They would then recost that material+serial # with al

  • Help on stuck thread

    Hi, From my server log I noticed that there are some stuck threads. After looked at the thread dump thread 18 is blocking. MainPortalServlet.java is extends PortalServlet and line 96 is super.service(request,response); Please help me to analyse why i

  • HT204088 Find out how much a failed payment was for

    I have my card set up for payment but my bank declined the payment, my own fault as I hit a paid app I didn't want Want to know how much this was for but can't find out what I do owe.....