How can i print a scrit to keep in wait for some time then be printed

Hi Experts,
This is sheela reddy.I am new to SDN.
I need your help.
as per my requirement there is a trasaction code .let say X.
So when i excute X and save the data through the Tcode,then it automtically calls script and given for printing
Since the script printing blank values (that means by that time it calls script Data base is not getting updated aftr i save the Tcode),client asked to keep excutin for 5-10 sec then script sould be called .so tha t by that time DB could be updated.But i really not have any idea how and where to include the WAIT statement.My doubts are:
1.How could i know the print program and form name to a standard Tcode.
2.Where i need to include WAIT statement so that the print program calls script for time mentioned.
PLs help me in this regard.
I really appreciate your time .
rewarded with points.
rgds
Sheela

Sheela,
use
AM_PING_AND_WAIT
into your print program some where for getting some delay.
and look at table TNAPR for print program and form.
Amit.

Similar Messages

How can i Delete all foto from my iphone and after some time get them one more time on it but not as a new album :)?

How can i Delete all foto from my iphone and after some time get them one more time on it but not as a new album, i want them in the camera roll ?

How can I delete EVERY THING off my Mac and have it like new?
Boot from the software install DVD and do an "erase and install" when prompted.

Can I have a decreased / cheaper monthly priced membership for some time, by keeping active only Photoshop CC, Illustrator CC, InDesign CC and Acrobat?

Hello, and good evening from Athens, Greece.
I would like to ask a question concerning my CC membership.
I’ve started 1 and a half year ago by paying 29,99 € for the entire CC (all programs). Now, it’s 49,99 € and I’m having a really difficult time to keep it this way. I’m living in a country which is in the middle of crisis and my profession as a graphic designer, is not an exception to reduced spendings on advertising.
My question is, can I have a decreased / cheaper monthly priced membership for some time, by keeping active only Photoshop CC, Illustrator CC, InDesign CC and Acrobat? I don’t need for now the other apps. Can I have a membership plan only for those applications? I would very much appreciate your respond, a help and a solution to my issue.
Thank you very much.
Michael.
P.S. Forgot to tell, that I have a purchased Design Standard CS3 Suite. If this helps.

No... there is a special Photography plan
Special Photography Plan (includes Bridge)
http://helpx.adobe.com/photoshop/kb/differences-photoshop-creative-cloud-photography.html
Every thing else is all or nothing
Cloud Plans https://creative.adobe.com/plans
-and subscription terms http://www.adobe.com/misc/subscription_terms.html
-what is in the entire Cloud http://www.adobe.com/creativecloud/catalog/desktop.html

How can I get (using API) the current sort column for some report

hello,
How can I get (using API) the current sort column for some report ? For example something like "fsp_sort_1_desc" - if the user sorts by the first column ?
I cannot use the :REQUEST for this, sometimes the current sort column is not in the :REQUEST, but it is still active.
I thought it was posssible by using
APEX_UTIL.GET_PREFERENCE (
p_preference IN VARCHAR2 DEFAULT NULL,
p_user IN VARCHAR2 DEFAULT V('USER'))
RETURN VARCHAR2;
function, but I don't really know which preference should I pass as parameter.
looking in WWV_FLOW_PREFERENCES$, i saw preferences_names like FSP4000_P527_R6281510839654570_SORT , I'm not sure how this name is formed.
I'm using generic columns for that complex report (which has a flexible number of columns shown), and the idea is that sometimes I have to overwrite that sort column, in case the user chose the version of the report with fewer columns than the previous one.
Can I get (using API) a list of all preferences set for some user ?
Thank you,

seems that it is FSP<app_number>P<pagenumber>R<regionnumber>_SORT.
is there anyplace where I can get these kind of things documented ?
Thank you.

Do sth for 5 sec. or 5 min.? How does Java wait for some time ?

How can I show a text in a label for 5 sec. and then make it disappear ?
How can I make my app wait for some time ?
What's the command ?
thanx!

The above is correct, but since painting is done in a separate thread, the likely result would be a blank space for 5 seconds, followed by a brief flash of text. You need to look at methods like invokeLater in SwingUtilities. You could also try forcing a paint(Graphics g) rather than a repaint before you wait.

LR6 wait for some time hoping to launch as soon as D750 can not connect!

LR6 wait for some time hoping to launch as soon as D750 can not connect!

RAW is supported for D750 in versions later as 5.7
I suppose tethering will be added with next version, which probably is LR6.

My mbp always hang (black screen but still keyboard light)(snow leopard and lion) and self hang and restart(mountain lion), How can I do? (I report problem to apple for 100 times but no reply)

I use mbp late 2010 (MacBook Pro (15-inch, Mid 2010) Serial Number: W802627ZAGZ)
(core i7 2.66GHz. 15" 4GB 1067 MHz DDR3) and change display to highres (1920x1080)
it has problem that the screen go blank (or black screen) but keyboard still light. seems to display driver stop working.
I send my mbp to service but they said no problem about hdd.??? I'm not sure that they take care just only hd problem but not handle another problem that I tell him.
I use it and it still hang up (not it reach 100 times errors) how can I do with this problem?

baltwo wrote:
Can't recall which I used to do the dynamic repartitioning.
I'm betting that it was originally Partitioned with Snow Leopard.
As a test I just added a second Partition with Mountain Lion to a FireWire HD and it would not let me Install Snow Leopard from my System or Retail Disc into the Partition.

HT1338 Hi I have an Imac with I5 processor.It was working perfectly and i didnt use for about 2 months.The AC was unpluged.Then week ago when i want to start the Imac, it didnt start.But if i keep holding or pressing the power button for some times then i

Hi I have an Imac I5 21.5 inch.It was working perfectly.Then i didnt use that for about 2 months. Week ago when i want to start the Imac ,it didnt start.
When press and hold or keep on pressing the power button then i hear the fans are working and i get a continuous beep( but low freqency tone).
But screen does not turn on.Please help me to rectify this problem.Best Regards. By the way I am an electronic technician.So if there are any technical things to be done, Pls let me know.I can do it my self.

Hey terremo,
Thanks for the question. From the information you provided, it sounds like the iMac is successfully turning on, however video is not displayed. These symptoms can usually be isolated further by the troubleshooting steps in this article:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Thanks,
Matt M.

How can I use a Counter in a Card 6601 for several times in the same VI

When I try to use a Counter two times for read and for write, I get always a error (no. 50103). What should that mean.

From the menu Help-->Explain Error...
"The specified resource is reserved. The operation was completed by ignoring or overriding the specified resource."
If you are using one particular counter for both read and write operations, you'll need to clear the read task before configuring the write task and vice versa. To clear the task in traditional NI-DAQ, pass in the task id to "Counter Control.vi" with a control code of 'reset'. When using DAQmx wire the task into "DAQmx Clear Task.vi".
Do you really need to use the same counter in both a read and write mode at various times? Are the other three all tied up? Maybe I or someone else can help more if you describe the app and/or post some example code.
-Kevin P.

HT5012 How can i know when my iphon is turend on for first time

I want to know when my iphon is turend on for the first time , tnx

Call Apple and ask them. 1800-MY-APPLE

I am trying to delete pages I have crated in numbers, but can only see them in print preview. Without print preview I do not see them. How can I delete these pages, but keep others before and after?

I am trying to delete pages I have crated in numbers, but can only see them in print preview. Without print preview I do not see them. How can I delete these pages, but keep others before and after?

Hi Crushed,
Numbers doesn't have pages. It has a canvas that holds objects such as tables and charts.
Drag the objects from the bottom of the canvas onto the white space above. That will reduce the number of "pages" (sheets of paper) that will print.
Regards,
Ian.

How can I delete the video and keep the Audio in a few frames using Imovie 11

How can I delete the video and keep the Audio in a few frames using Imovie 11?

I've met the problem too before. but i solved it with Audio Converter Mac instead of iMovie. If you have similar situation that just want to keep audio but not video, and if your file format is not workable in iMovie, you can use the Audio Converter for help too. it can easily help to extract audio soundtrack from any video format. Or if you need to convert one audio format to another, it is a good choice too, because it supports many common audio output formats.
<Link Edited By Host>

How can I access my parents iCloud account remotely to assist with photo management and printing?

How can I access my parents iCloud account remotely to assist with photo management and printing?

I tried that without any luck. I was hoping I could get Apple to reset it for me or delete the account so I could recreate it or at least tell me what is listed as my birth date, the security question answer.

How can I hide the borders and keep it as an option?

How can I hide the borders and keep it as an option? I had someone go into the css I believe, and make it so there were no borders visible on the page (I could see the dotted outline while working on it, but when pushed, it wasn't visible (which is what I wanted). They called it "noborders." Since I had to reinstall, it went away. Help?
I have Dreamweaver CS5.5

Try this site: CSS Border
Add code then type in a zero. Later add border size you want.
examples: border: 0px solid black;
or
border: 1px 000000;
or
     border-top-style: solid; 0px 000000;
     border-right-style: dotted; 0px 000000;
     border-bottom-style: solid; 2px 000000;
     border-left-style: dashed; 1px 000000;

How can I clear star up disk - keep getting message that it is almost full

How can I clear star up disk - keep getting message that it is almost full

Move the videos and pictures stored on the device to your computer and create more room on the device.

How can i print a scrit to keep in wait for some time then be printed

Similar Messages

Maybe you are looking for