How can I print just a select/highlighted portion of a webpage/email? FF prints EVERYTHING on each page, wasting ink.

I switched form IE to FF. In IE, I could select text (or photos) and print just the portion of web pages and emails that I wanted, thus saving paper and ink. I have not been able to do that with FF. I have to print all of each page, so text, ads, and whatever other extraneous material prints. What a waste! Is there any way to select and print just what I need using FireFox? Currently I have to run both IE and FF to handle my printing and documentation needs. Thank you!

Still happens with Firefox 12. I wish they'd just fix it, the way it used to be in Firefox 10, without the complicated workaround suggested above.

Similar Messages

  • How can I restore the text selection highlight colour to the default black colour in indesign CC ?

    How can I restore the text selection highlight colour to the default black colour in indesign CC ?

    Manish Shama, thanks for your speedy response. I was able to get into my MAC settings and change the background from the black to whatever color I like, so that helps (THANKS!). But the real issue is that the selected text does not turn white (even though that's what's specified in my MAC settings), it remains black. I really want to have the selection reverse out as it always has for years and years going all the way back to PageMaker Any ideas?

  • When i crop a video using FCE, how can i export just the selection?

    When using the cropping tool with FCE 4, say i just crop out a single square from near the top of the video. if i were to export this video now, the new video would consist of the cropped out selection surrounded by black. is there anyway i can export the cropped out selection without the black? i'm not looking to rescale the image, just to remove the selection at it's original size without all the black around it.

    FCE's a fixed-resolution editor and there's no way to export at the resolution of your cropped image unless it matches one of the sequence presets.  In FCP you could set a custom resolution and export as that.

  • When an email contains multiple attachments how can I forward just one of the attachments in a new email?

    I am new to IPAD use and need to forward one attachment from an original email that contains multiple attachments - how can I isolate and forward only one of the attachments?

    Aha! I have been doing just that. However, what has been tripping me up is that I am also used to clicking the Go Online/Go Offline toggle button on the top menu bar when I manually check for messages on Cox. Apparently when you take one inbox offline, that button switches to Off even though the other inbox is still online. If I just ignore that button and go on or off via the cox mailbox listing, it keeps comcast from being reactivated.
    Thanks so much for helping me think this through.
    Edited to add: I removed that dang button from my menu so I can stop clicking it.

  • How can I burn just a selected part of the project to DVD?

    Afternoon all,
    we downloaded a number of clips from our HDV that we wanted to use in making a short movie (1 hour's worth of clips will end up being a movie of about half that length). After doing that, we decided to do a 'preview' of 2 minutes worth of mixed clips (5 in total) with music.....I made a new copy of the whole project and then deleted everything that we didn't want from the original collection of 1 hours worth of downloaded clips so that the project just left 2 minutes worth of clips.
    When we tried to burn this 2 minutes to DVD it seemed to be trying to do the whole project including a whole lot of nothing where I've deleted everything.
    Could you please tell me how to select only the 2 minutes worth of 5 clips and audio so that I can burn only that bit to DVD and also upload it to YouTube.
    A million thanks from a challenged newbie who can't find any instructions for doing this..
    JON

    Jon,
    It sounds like you did, just as you should, Save_As and Delete everything that is unwanted. If you did the Deletion from the Timeline, there should be nothing from the old Project, that should be included. A DVD is Transcoded and burned from the Timeline. If the Assets are not there, they will not included in the DVD, even if you did not Delete anything from the Project Panel.
    Tell us about the Clips now on your Timeline. Also, can you check the Timeline, by hitting the \ (Backslash key), and looking near the end of the Timeline. Do you have any "orphans" out there? Check all Video Tracks, even if you have to scroll to see them all. Does the Duration of the Timeline (viewed in the Program Monitor) match what you think that it should? If not, then you most likely have orphans, that you missed Deleteing.
    Good luck,
    Hunt

  • Why can't I print just a selection of an Apple Mail message?

    I have a MacBook running OS 10.5.8 (with the latest updates). My preferred browser is Firefox 15.0.1. I have always been able to print just a selection of a document, and I can do so in Microsoft Word, Google Mail, everything, it seems except Apple Mail. I have a little HP inkjet printer and a new Brother laser printer (HL-5470DW). I've searched their Help menus and manuals, as well as the Help menu for Mac and have found nothing about printing selections of Apple Mail messages. Is there a way to do that? Or do I have to copy the selection into a different document, like one in Microsoft Word for Mac? Or Google Mail? I prefer not to do that last option. The formatting choices are not the greatest.
    Any help would be greatly appreciated. Thanks.
    Jenny

    Thanks BDAqua. It seems so silly that it's so easy in other contexts, but it's good not to keep on trying something futile
    Best,
    Jenny

  • I cannot print just a selection of a page, what can I do?

    I have seen that other people have asked this question also, but none of the replies on the forum are satisfactory. They all say it is not a good thing what you have done with the print option. I want to print a simple recipe, maybe half a page, I go to print and cannot select the option to print just the selection. It shows 7 pages to print! What a waste of time, paper, and ink!!!
    The only option people seem to have found is to copy the selection and paste it in a word document. Then you end up with a lot of junk in word that is not needed. This is also time consuming.
    My old version of foxfire didn't have this problem. Please fix this issue or I will be forced to switch to another browser, which I don't want to do as foxfire still has the least crashes of any browser I have used.

    Simple answer is - '''don't use the Print button when you want to print a selection'''.
    # Select the text that you want to print.
    # Use '''{ Ctrl + P }''' to open the "native print dialog".
    # 'tick' '''Selection''' under Print Range
    # Hit the Print button in that dialog box to print that "selection".

  • I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash.  When I save the project, the file size is 20Gb.  How can I save just the 33 sec clip?

    I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash.  When I save the project, the file size is 20Gb.  How can I save just the 33 sec clip?

    Non-destructive editing is an important feature of iMovie HD 6.
    iMovie preserves the entire copy of every clip you place into your movie in case you change your mind at a later stage.
    So, if you have cut out one minute from a 45 minute clip, iMovie will have stored two complete copies of that clip. This is why is helps to set import as 3-5 minute clips rather than one huge chunk. As DV runs at 13GB per hour your project files can get very big.
    One workaround is to complete the editing of a section of the movie, then export that to Quicktime: highlight the clip/s, choose Share-Quicktime, turn on Share selected clips only, and choose Full Quality from the pop-ip menu.
    Once you have saved the stand-alone clip to your hard drive, you can re-import it into your project using the File/Import command, and delete the original long clip/s from the project.

  • I downloaded pictures onto my iPhone from computer twice by mistake now when i uncheck/sync then check and sync again  i keep getting two lots of pics..how can i get just the one set again? thnx

    I downloaded pictures onto my iPhone from computer twice by mistake now when i uncheck/sync then check and sync again  i keep getting two lots of pics..how can i get just the one set again? thnx

    You're welcome.
    All photos transferred from your computer are stored in the iPhone's Photo Library regardless if you select a single album or folder of photos to be transferred or multiple albums or folders. The photos on the albums or folders of photos include a pointer to the original photos stored in the Photo Library. The photos are not duplicated taking up double the storage space. This way you can view the photos in an album or folder of photos only by selecting the album or folder, or all photos in all albums or folders by selecting Photo Library.
    Makes more sense when transferring multiple albums or folders of photos which cannot be changed when transferring only a single album or folder of photos.
    The same applies with iTunes and music playlists. A song can't be in a playlist unless it is in the main iTunes library. Placing a song in a playlist does not duplicate the song.

  • How can i extract just documents from time machine backup?

    How can I extract just my documents from a time machine backup?   I had to re-install Lion after the update screwed things up, the Genius Bar guy told me to re-install each App, and then transfer just my data (documents) back but didn't tell me how.   I only see how you can restore the entire snapshot of what was on my MacBook that day, I don't see how to select specifics. 

    Hi,
    Install a fresh Lion OS on your Mac. After this is done, then connect your time capsule. Click on the time machine icon in the dock bar so you will enter in time machine. Select the document folder and any document or all you need. The same thing you can do with iPhoto, Emails, etc.
    Let me know
    Claudio

  • TS1135 how can you correct just a few words on the text in the flap of a iPhoto book? do you have to rewrite it all?

    How can you correct just a few words in the text on the flap of iphoto book?

    Select it and change it - exactly like you edit any text on yoru Mac
    LN

  • How can i filter just te equipment with date to 31129999 ??

    Hi ,
    How can i filter just te equipment with dateto 31129999 ??  i need just the valid equipment with dateto 31129999 but this char i cant take it to filter, how can i do this?

    In the Update tab of the InfoPackage, you can select the Time-Dependent data. In this, if you only want to extract Equipment Master Data Attributes or Master Data Text for effectivity dates of current date through 31-Dec-9999, you can create a routine for the time interval by updating it as such:
      CONSTANTS: c_max_date TYPE d VALUE '99991231'.
      p_datefrom = sy-datum. "Current Date
      p_dateto   = c_max_date. "Max Date

  • How can I turn on "speak" on highlighted text on iPhone 3GS?

    How can I add "speak" option to highlighted text on iPhone 3GS?

    AustinReyes wrote:
    I just need to locate my iPhone but my location services are off, is there any way to turn them on from another device?
    Sorry... No.
    Lost or Stolen iOS device  >  http://support.apple.com/kb/HT5668

  • How can i call the certificate selection dialog box from source code?

    How can i call the certificate selection dialog box from source code?
    NB: Of course if i have more than one certificate in the Microsoft Keystore 'My'.
    Thank You in advance

    I found an example of the "TestStand UI Expression Control.ctl" and it works just the way I need it. (check the link)
    Proper use of "TestStand UI ExpressionEdit Control" in LabVIEW http://forums.ni.com/ni/board/message?board.id=330&requireLogin=False&thread.id=10609 
    The "Expression Browser Dialog Box Button" F(x) stays disable while editing the VI, however it become available when the VI is called from TestStand.
    Thank you,
    Hecuba
    Mfg. Test Engineer
    Certified LabVIEW Associate Developer

  • How can I get just a page border without having a border around every paragraph?

    How can I get just a page border without having a border around every paragraph? I just want a border around the perimeter of the page.

    Assuming you are using Pages 5, you haven't said:
    1. Select multiple paragraphs > Text > Layout > Borders & Rules > choose a line > select a thickness > select the 4th Positon (all around) > Offset
    or
    2. Inseert a rectangular shape > Resize to suit > Format > Fill > No fill > Border > Line > select thickness/color > Arrange > Stay on Page > Text Wrap > None
    If you want that on every page
    Menu > Arrange > Section Masters > Move Object to Section Master
    Pages will not be able to use fonts that are on your PC (I suppose?) if it doesn't have them. Obviously.
    Just as your PC will not be able to use the Mac's fonts.
    Peter

Maybe you are looking for