How can I print via the AirPort Time Capsule on a Windows 7?

Hey,
First of all, I am really inexperienced about all these things. I have a MacBook from 2009 with OSX Lion and a PC Windows 7 x64. I have got a time capsule (https://www.mikepalmer.net/wp-content/uploads/2011/12/apple-time-capsule.jpg) connected to my router
and then another router in my room (probably working as an acces point) to which I wirelessly connect my Windows 7.
The thing is that I can see the printer (HP Laserjet P1005) from my Mac but I don't know how to add it to my windows. On a previous PC I added a printer to the time capsule's IP 192.168.1.2 and printed with a considerable delay that way.
As you can see I don't understand how networks work, how IP's work, or how ports work in this matter.
Any help will be much appreciated!!

Hi PGMLEBL,
I am not familiar with Mac product, the best way is ask the HP printer support for the detail support, generally if we know the printer IP address we can add it through add
a network printer, you may can refer the following third party article to add the printer:
how to install a network printer using TCP/IP in Windows 7
http://www.jmu.edu/computing/helpdesk/selfhelp/win7tcpipprinting.shtml
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

How can I set up the airport extreme base station with windows computer

how can I set up the airport extreme base station with windows computer

Hi - you need Airport Utility version 5.6.1 for Windows 7 - go to http://support.apple.com/kb/HT1547 to download it to your computer - the setup depends on what kind of modem you have and if you have another router connected - post back with this info to proceed - thanks

HT1178 I have failed to Map the Airport Time Capsule to my windows 7 HP laptop as a mapped drive, error message is "access denied"

I have failed to Map the Airport time capsule to my windows 7 HP laptop, i followed all the installation steps and i get the error message "Access denied, you do not have permission to access this device, contact network administrator"

Did you install the airport utility for windows?
Is the windows computer set to home as network location.. it will not work if it is set to work or public.
Is the TC setup with all SMB type names, short no spaces and pure alphanumeric. No apostrophe.
Can you ping the TC from your computer? Open a command window and type ping and the tc name or its IP.
No response you will never be able to get connection .. it is usually firewall problem. Turn off firewall and internet security.
If it pings then simply type the IP directly into explorer.. \\TCIPaddress. (eg \\10.0.1.1 if the TC is at default)
That is usually the most foolproof method.

How can I make my new AirPort Time Capsule with VOIP?

I purchased an AirPort Time Capsule because of the modem capability. The modem we have from the phone company isn't very good.
Now I have a little problem. I forgot we have our phone over internet and I cannot figure out how to set it all up.
Any ideas for my latest problem? I'd run back to the store/genius bar, but it's a ferry ride away and I'm not sure it would do any good to go back because all my phone "stuff" (cords, etc) wall jacks, is all here.
Current set up is this:
Modem box has ethernet (yellow) cable going from it to imac. It also has blue cable going from it to ATA Router (smaller black box). Each box (white larger "modem" box, and black smaller ATA Router) have a phone cord going from wall (2 separate jacks) to the box. And obviously each has it's own power cord.
I tried moving all plugs from white modem box to AP TC, but there really isn't a phone jack on back of APTC. It clicked in place in one of the <--> ports, but I'm getting a flashing amber light on the front, and no internet connection.
Any ideas for my latest issue?? I know so much more about computers than I ever wanted to know, but it obviously isn't enough.
Thanks!

I purchased an AirPort Time Capsule because of the modem capability.
There is no modem in the airport routers.. they are all plain ethernet routers.
It sounds like you have adsl modem.. and I would just leave it alone.
But if you want to play and your ISP supports PPPOE and the modem allows bridging or bridge mode.. then you can bridge the modem and use TC to establish the link to the ISP.. on the internet tab use PPPOE and put in your ISP username and password.
You can then plug the ATA into one of the LAN ports of the TC.
Overall this is probably not a great idea.
Exactly what modem are you talking about .. make and model from the base please?? Who is your ISP?
What model is the ATA? Actual model numbers from it please.
Generally you will plug the TC into the modem and use simple bridge mode.
Even though the airport wizard might attempt to take over as main router.. please do the setup manually and choose bridge mode.
See Airport Utility shows "unexpected error - please try again" when connecting to Time Capsule

How do you set up the airport + time capsule to a win XP and 7 machines?

All my Apple products can connect just fine but none of my windows machines can access wirelessly. I tried different downloads but none of them seem to work any way for me to rectify this?

For those who are running Windows and controlling the Airport Base Station with Airport for Windows. Apple just came out with a firmware update for Airport Extreme (7.7.2). It so happens that this Firmware version requires Airport Software version 6.3 or newer. The Windows version only goes as high as Version 5.6 or so. I was also told that Apple is unlikely to upgrade this software. To make a long story short you need to control (Configure) your Airport Base Station with an iMac, or an iPhone or iPad with the Airport app. This solved my problems. Good Luck :)

How can i use the airport time capsule as a external hard drive?

how can i use the airport time capsule as a external hard drive?

Why do you recommend not place things like iTunes libraries or photo libraries on the drive? It was what I am looking for...
I suggest that you ask the experts over in the iPhoto Support Community about their opinions on placing an iPhoto or Aperture library on the Time Capsule....even if you plan to use a wired connection for your Mac and the Time Capsule.
But, if Terrence Devlin answers, be prepared for a lecture about why you should not ever do this.
If you place the iTunes library on the Time Capsule, be prepared for iTunes to give you messages about not being able to find the library.
In addtion, LaPastenague has the answer for you in a nutshell......corruption problems.
Bottom line....the Time Capsule is for your backups.....not "everyday" files and especially not libraries.

I have 2 macs and 2 PC laptops in my home wireless network. Can I use the Airport/Time Capsule hard drive to back up all 4 machines? I know that I will have to use different back up software on the PCs, but is it possible over the wireless network?

I have 2 macs and 2 PC (Windows 7) laptops in my home wireless network. (The iMac is hardwired via ethernet to the Airport/Time Capsule; the others are wireless connections using Airport). I want to use the hard disk drive in the Time Capsule as a network backup drive for all 4 computers. Is this possible? Could someone help me by telling me how to configure it? I know I will have to use different backup software in the 2 Windows 7 Laptops? Do I need to use the Windows backup software, or can I use a third party program like Acronis True Image? Thanks in advance for the help

It is your fault, pondini.. all your fault.
I read of all the things that go wrong restoring Time Machine backups.. particularly stupid things like mail, photo libraries don't go back.. etc. And looking through the incredible number of issues people have here, when their Mac finally takes a dive how hard it is to restore.
I restored a test hard disk from a TC.. and it takes ages and ages to even make up its mind to start.
I worked in computer support for ages, but not Macs.. so my experience is ghost.. ghost images.. on large commercial server setups, can stream restore to multiple computers at once.. even doing it computer by computer the image is simple as network boot to restore. But ghost went the way of Symantec.. sigh!! And was destroyed.
A product like clonezilla, Free linux boot cd.
http://lifehacker.com/5078397/clonezilla-backs-up-and-restores-your-disks
Can backup a Hard disk in just about any format.. yet to try it on a Mac to a TC.. but I will. Boot from CD.. instead of your lost Lion partition which no longer exists (because the hard drive had to be replaced) and the DVD they no longer give you, and restore the entire hard disk in a couple of hours .. to the exact image at the point you made the clone.. in any format, with any partitions.
My bet is that it will kill TM .. but you could be right.
It is just the prospect of all those permission changes, photos and mail libraries etc that worry me.

The item can't be moved because AirPort Time Capsule can't be modified

have just set up my new airport time capsule done a time machine back up but can not add any files to it to share when i try i get the following message
"The item can’t be moved because AirPort Time Capsule can’t be modified"
how do i change this
many thanks

pooldoc58 wrote:
have just set up my new airport time capsule done a time machine back up but can not add any files to it to share when i try i get the following message
"The item can’t be moved because AirPort Time Capsule can’t be modified"
how do i change this
many thanks
How are you trying to add files??
You cannot add them to the TM backup?
TM owns the sparsebundle and you should not add files to any sparsebundle.. do not even attempt to.
You can create a new directory in the Time Capsule and copy files to that.. as long as you have turned on file sharing and give correct access permissions.
Mixing data and backups does have consequences though.
See Q3 here.
http://pondini.org/TM/Time_Capsule.html

How can I print only the attachment without the email content

How can I print only the attachment without the email content. Every time I send to print, It prints the email itself with the attachment- can I cancel that?

Hello Riklama,
When you first open the attachment (e.g. on your phone) than you can mail only that attachment. Works fine with my husbands blackberry.
Elsy

HT4356 I don't have wireless printer. How can I print out the document?

I don't have a wireless printer. How can I print out the document from regular printer?

iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
iPad Power: How to Print
http://www.macworld.com/article/1160312/ipad_printing.html
Check out these print apps for the iPad.
Print Utility for iPad ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
Print Agent Pro for iPad ($5.99) http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8 Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
FingerPrint turns any printer into an AirPrint printer
http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
 Cheers, Tom

How can I delete everything from my Time Capsule? Disk Utility only gives me the choices of First Aid and Restore.

How can I delete everything from my Time Capsule? Disk Utility only gives me the choices of First Aid and Restore.

How can I delete everything from my Time Capsule?
Disk Utility would be used for an internal hard drive on your Mac, or for a drive that was attached directly using USB or FireWire.
The Time Capsule is a network drive. Disk Utility cannot be used for this type of drive.
Open Macintosh HD > Applications > Utiltiies > AirPort Utility
Click Manual Setup
Click the Disks icon
Click the Disks tab below the icon
Click Erase
The "Quick Erase" option will only take a minute or so. This would be fine if you plan to keep the Time Capsule yourself.
If you plan to sell the Time Capsule, you would want to use a more secure erase, like "Zero Out", which will likely take 4-6 hours or so since everything on the drive will be replaced with zeros.

How can I print ONLY the active document?

Whenever I go to File/Print the darn PSE 9 program sends all of the working files in the bin to the printer. I've searched online for 2 hours now looking for an answer.
I like to work with having several to many files in the 'bin' and prefer to only print the active file I'm currently working on without having to close the 'working files' before I can print. How can I print ONLY the active document or file in the project bin? Please help, I've upgraded from PSE 3 to PSE 9 and really like the updated features, but this one pain in the neck default is getting the best of me.

Thanks for your help, that works nicely. It is good to have control of the printer again.

How can i print out the waveform chart?

hello everybody,
how can i print out the "waveform chart". can i do it just push the button. ( example; stop button is stop the program etc..)
i checked the NI examples but i can't understand. i'm new to the Labview.
pls help me.
i added the my program
look forward your reply
regards from turkey...
Message Edited by hknmkt on 05-29-2008 04:15 AM
Attachments:
29.05.2008_11.vi ‏37 KB

hi jim,
i tried the program but it's not running. When i run the program, it's print out without run the program
i added the printed file.
look forward your reply
hakan
Attachments:
error8.JPG ‏8 KB

How can I print with the black and white cartridge only?

I am trying to print using the black and white cartridge only because magenta is out of ink but I'm getting the following error message in HP Photosmart C7200 series print dialog:
The printer is out of ink.
The following ink cartridges are empty: Magenta. Replace these ink cartridges to resume printing.
How can I print with the black and white cartridge only?
Mac OSX 10.7.3
HP Photosmart C7280 (7200 series)
This question was solved.
View Solution.

I am absolutely disgusted by this; clearly a scam from HP to make more money by selling extra ink cartridges!! I will make sure to never buy any products from the shoddy rip off merchants at HP ever again!!
You should be ashamed!!

How can i print all the contect of the code in sapscript window ? ?

how can i print all the contect of the code in sapscript window ? ?

Hi,
Do you mean that you want to print the ABAP code to SAPscrip form ?
Svetlin

How can I print via the AirPort Time Capsule on a Windows 7?

Similar Messages

Maybe you are looking for