How can I  process raw files from lumix GH4 on photoshop elements 12?

How can I  process raw files from lumix GH4 on photoshop elements 12?

Your files should open in photoshop elements 12, since there is only one version of camera raw 8.5
(RC means a release candidate of 8.5, which came before the final version of camera raw 8.5 and was for testing)
In the pse 12 editor if you go to File>Open and select one of the lumix GH4 and then press Open, what happens?
In the pse 12 editor, if you go to Photoshop Elements>About Plug-in and click on the words Camera Raw, what version does it say?

Similar Messages

  • How can I open RAW files from Nikon D7100 in Photoshop Elements 9?

    How can I open RAW files from my Nikon D7100 in Photoshop Elements 9

    Three choices:
    1. Upgrade to PSE11
    2. download the free Adobe DNG Converter and then convert your RAWs to DNG, which will open in PSE9
    3. Use manufacturer's software and convert to TIF (or JPG)

  • How can I process raw files in Aperture from a Sony RX1?

    How can I process raw files in Aperture from my Sony RX1?

    Here is a list of supported cameras
    <http://www.apple.com/aperture/specs/raw.html>
    Your Sony RX1 is not listed. Your best bet would be to use the software, that came with your camera to convert the raw files to tiff and to import the tiff to Aperture. Or to shoot raw+jpeg and to import the pairs and to work with the jpeg versions as original master files, until Aperture supports your camera.
    Regards
    Léonie

  • How can I upload raw files from my canon g7x to lightroom5

    How can I upload raw files from my canon g7x to lightroom

    See this thread in the official Adobe feedback forum: Why doesn't my version of Photoshop or Lightroom support my camera?

  • How can I open raw files from my Nikon D7100 in CS4 or CS5?

    How can I open raw files from my Nikon D7100 in CS4 or CS5?

    Andy,
    In the simple and short form, what happens with the ACR (Adobe Camera RAW) module is that it gets updated with regularity, to accommodate the camera mfgr's. changes for their newer models. That ACR works within the host program, such as Ps, PsElements, Lightroom, etc.. At a point, Adobe ceases to support older host program versions. When that happens, the user has a few options:
    Upgrade the host program version
    Use another host program, such as PsElements or Lightroom
    Use the free DNG converter, per Curt's suggestion. That is not host program dependent
    Glad that the DNG Converter works for you.
    Good luck,
    Hunt

  • How can I import Raw files from a canon eos 6d?

    How can I import RAW files from a Canon Eos 6D into aperture?

    Doesn;t look like the 6d is supported yet. I'm surprised, thought it would have  been in the latest update, 4.02.
    In the meantime you can shot RAW+JPG and use the JPG's now and then switch to the RAW's once it is supported or else you an convert the RAWs to DNG using Adobe's converter and import the DNGs.
    While I can't say for sure  Canon cameras are usually supported fairly quickly so hopefully you won't have to much longer to wait.
    regards
    And in the meantime let Apple now you want this see Aperture->Provide Aperture Feedback

  • Can not open RAW-Files from Nikon D4 in Photoshop cc

    hi. i can not open RAW-Files from Nikon D4 in Photoshop cc. (Camera RAW 6.7) can you help please?

    ACR 6.7 would be for an older product, PS-CS5 or PSE10 or PRE10.
    What does Help / About Plug-ins… / Camera Raw… show in PS-CC for a version for ACR and is there more than one version of ACR in the Help / About Plug-in list.  Help / About Plug-in is what I’d do on Windows; I’m not sure if the menu path is the same on a Mac or not.

  • How do I edit Raw files from a Canon 5D using Elements 9?

    How do I edit Raw files from a Canon 5D mark 111 using Elements 9?

    The 5D mk III is supported in PSE 10 with ACR 6.7 update.
    You could download and install the latest DNG converter and use that to convert the CR2 files to DNG files (still RAW format). Then you can edit the DNG files using PSE 9.
    Brian

  • How can I import raw files from nikon d810 to elements 12

    How ca raw files be imported into elements from a nikon d810

    If the images are in iPhoto for iOS use the Share to iTunes feature. Then connect your iPad to the computer you normally sync with, open iTunes, select your iPad in the left column of iTunes and in the right column select General. Ten scroll down to find the File Sharing area and select iPhoto. You will see a pane where your photos are listed and you can copy them to your computer. I'm not completely sure the copies will be RAW files but at least you have saved a version of the photos.
    I use my iPad to review, display and post photos but I use my computer to actually process RAW files. While I often connect my camera to my iPad to transfer photos I never delete them from the card and ill eventually copy them to more than one hard drive.

  • HT5182 How can I import RAW files from my iPad to my MAC computer?

    iPhoto doesn't recognize RAW files on my ipad and unfortunately, I've deleted the images from the SD card in my camera. I'm concerned that I've lost access to these images for processing. Any advice?

    If the images are in iPhoto for iOS use the Share to iTunes feature. Then connect your iPad to the computer you normally sync with, open iTunes, select your iPad in the left column of iTunes and in the right column select General. Ten scroll down to find the File Sharing area and select iPhoto. You will see a pane where your photos are listed and you can copy them to your computer. I'm not completely sure the copies will be RAW files but at least you have saved a version of the photos.
    I use my iPad to review, display and post photos but I use my computer to actually process RAW files. While I often connect my camera to my iPad to transfer photos I never delete them from the card and ill eventually copy them to more than one hard drive.

  • How can I access RAW files from a Canon 650D on PSE 9 or 10?

    We have versions 9 and 10 of PSE to install on two computers, upgrading from version 6 on one of them.
    We have two Canon cameras - a 450D and a 650D - and have taken RAWs on both. The 450 works fine with PSE6, but we can't get PSE 9 to take a RAW converter new enough to read the 650 files.
    We don't really understand the difference between CR2 and DNG so don't know what we might lose if we used the DNG converter for the 650 RAW files.
    Pat & Mike

    You'll have to upgrade to PSE11 to get native support for the 650D, or use the DNG converter to make your files compatible with an earlier version.
    FAQ: Will Photoshop Elements work with my camera, or Why won't my raw files open?

  • How can i convert Raw files from Nikon D 800?

    Any ideas on converting Raw files on Nikon d 800 to Jep in Aperture? I get an invalid file message.

    Install the Camera Raw update
    http://support.apple.com/kb/DL1513
    Regards
    TD

  • How to view the raw files from Canon 7D MII in elements 10

    I have elements 10 but it does not support my canon 7D MII raw files

    The Canon 7D Mark II requires Camera Raw 8.7 which is not compatable with Photoshop Elements 10.
    You have a few choices
    1) Upgrade to Photoshop Elements 13
    2) Download and Install the free Adobe DNG Converter. Use the converter to convert the CR2 files to DNG files which can then be used in Photoshop Elements 10
    3) Use the Canon software (DPP) to convert the Cr2 files to TIF files which can then be used in Photoshop Elements 10
    Note: If you are on an old operating system like XP or Vista then you need to upgrade your system.
    For the DNG converter see here.
    Mac – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5858
    Win – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5864
    http://www.youtube.com/watch?v=0bqGovpuihw
    Brian

  • Unable to import raw files from a99 in to photoshop elements 10

    All worked fine with a77. Have downloaded new adobe raw 7.2  Can import for sdhc card to LR and then edit in PSE10 but unable to download from card into PSE10

    Hi,
    The SLT-A99V is supported by LR from version 4.2.
    You do need ACR 7.2 or later for that camera, however PSE 10 only supports up to ACR 6.7 and not ACR 7.2.
    Since you have LR, the best approach would be to use LR to convert the RAW to a TIF and import that into PSE 10.
    Alternatively, you could download the latest DNG converter and use that to convert the RAW files to DNG files and then import the DNGs.
    Out of interest, if you use LR, why do you want to import them into PSE? I use LR as my organizer and only use the PSE editor as an external editor when I want to do more complex editting - I don't need the PSE organizer.
    Brian

  • Uploading RAW files from Canon SL1 using photoshop elements 10

    I have photoshop elements 10 and a Canon SL1 camera.  My friend has photoshope elements 12 and the same camera.  She can "open in RAW" under her drop down "file" menu but I don't find that in my elements 10 program?  What gives?  How do I open my RAW files in photoshop elements 10?

    “What gives” is your PSE10 is too old to deal with SL1 raw files, directly.  The ACR 7.4 plug-in was the first camera-raw version to support SL1 raw files.  I don’t think PSE11 ever got the ACR 7.4 update, but PSE12 comes with ACR 8.0 which is new enough.
    You can try converting your SL1 CR2 files to DNGs using the DNG Converter 8.3 available at http://www.adobe.com/downloads/updates.html or you can upgrade your PSE to one new enough to support your new camera’s raw files,  natively.
    Or you can use a different Adobe product such as Lightroom or subscribe to the PS-CC+LR-CC for $10/month.

Maybe you are looking for

  • Need to develop a calibration report

    Hi experts, i need to develop a report for calibration input screen parameters are equipment no. date output screen Equipment no. equipment description Functional location order no. inspection lot no. inspection reading before calibration inspection

  • Financial Reporting 11.1.1.3 Client "Access Denied" connecting to HFM

    Hi, I have installed Financial Reporting 11.1.1.3 Client on a PC running Windows Vista 32 bit SP1. When I try to access to a report created form another PC that connects to HFM, it says "Error connectiong to server" and "Cannot connect to database "X

  • Conventions: creating a new constructor and calling a method on it

    Hello, recently i had a little discussion about the following: should we do it like this: MyClass c = new MyClass(); c.doSomething(); or new MyClass().doSomething(); now i also wanted to know if you should avoid one of the following, like do they use

  • Can Anyone Help?

    Hello Forum I have a Satellite P305 S8844 with Windows 7 a few weeks ago I found that my sound was not working properly. When I play Music, Sounds and Games the system tries to normalize the volume, that's how I can call it..The volume is not reachin

  • Field Desc Not appearing in SE16 in NL language

    Hi, My Problem is as follows I have a table with some fields. When I goto Se16 and display the data of the table the Column heading doesn't come for one field with Login Language NL. The field is attached to a data element and the data element has th