How can I produce a report of the people asked to complete a form and their response?
How can I produce a report of the people asked to complete a form and their response?
Thanks. I cover four different sites. We are using the same questions for the four sites. Each site has a different client base (with different users). So I am inviting persons to complete the form in an ad-hoc basis following training sessions (so far I have trained 10 out of 57). The responses will be viewed by two or three Managers. The problem is that it is difficult to see who has started filling out the form, who has not even looked at it, and those who have completed it. So for example at the moment I have a zero response to my requests to complete the form, although some people may be working on the form?
Russell W H Bulley C.Eng B.Eng MIET
Critical Engineering Manager
MITIE – Delivering FM for Lloyds Banking Group
5 Limeharbour Court, Limeharbour, London, E14 9RH
M: 07900704196
www.MITIE.com<http://www.mitie.com/>
Follow us:
Description: Description: Description: Description: Description: Description: Description: twitter_32<http://twitter.com/mitie_group_plc>[Description: Description: Description: Description: Description: Description: Description: facebook_32]<http://www.facebook.com/mitiepeople> Description: Description: Description: Description: Description: Description: Description: linkedin_32 <http://www.linkedin.com/company/mitie?trk=fc_badge> Description: Description: Description: Description: Description: Description: Description: youtube_32 <http://www.youtube.com/user/MITIEGroupPLC> Description: Description: Description: Description: Description: Description: Description: rss_32 <http://www.mitie.com/rss> Description: Description: Description: Description: Description: Description: Description: flickr_32 <http://www.flickr.com/mitie_group_plc
Similar Messages
-
how can I make two copies of the same picture one with my watermark and one without for printing for clients?
Export the photo twice, once with a watermark and once without a watermark.
-
How can I reset my ipod? The screen is showing it is disabled and my daughter forgot the password.
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Hi,
I lost my computer.
How can I sincronize me Iphone with the new computer without loose my contacts and apps?
Thanks
ThaschorIt has always been very basic to always maintain a backup copy of your computer.
Use your backup copy to move everything to the new computer.
If for some reason you have failed to maintain a backup ( not good), then you can transfer itunes purchases from the iphone: File>Transfer Purchases
If you enter one unique contact and calendar entry on your computer, then when you first sync you should get the option to merge the data. -
How can I produce two outputs of the same project
Dear Sir,
My aim is to produce two outputs of the same master project,
HTML help and Webhelp each one will be used differently in my
compnay.
Producing two outputs is fine but the problem was that
external links are done differently for HTML help and Webhelp and
as I Knew from you that this can be solved using conditional tags.
Actually I am new to conditional tags and I don't know how to
use them. Could you please help me to do this or recommend a link
on how to use condtional tags to produce different outputs.
Thank you very very muchHi there ahlam323
See if the link below helps any. Some goober wrote something
on it.
Click
here to read the goober's guide
Cheers... Rick -
How can I create a Report with the Report Generation Toolkit?
Hi,
I have installed Labview Report Gerneration Tool for Microsoft Office Version 1.1 and now I want to use MS Office Report Express VI but it need the VI "Dflt Data Dir.vi". I don't have this on my computer, why? Where can I get this VI? Can somebody help me?
thanks LabprogHello Labprog
This VI should be located in the file.llb in the folder
..\vi.lib\utility. Thus, it is not part of the report generation
toolkit but of LabVIEW. I am not sure why you are missing that file on
your PC, maybe you just did not find it because it is hidden in a LLB.
Maybe this LLB is not part of your LabVIEW package (Base, FDS, PDS).
Anyway, I'll attatch that little VI, hoping that this is the only one missing.
Ingo Schumacher
Systems Engineer Sound&VibrationNational Instruments Germany
Attachments:
Dflt Data Dir.vi 11 KB -
How can I access PDF-Reports outside the appliance?
If I know the URL
https://1.2.3.4/monitor/reports/system_statusto the HTML-Information, is it possible to get the same informations as a PDF "directly" without pressing the "Printable PDF"-Link to the commandjavascript:PrintReport()
Or do you know another way to schedule such PDF-reports and mail it to my account?You can have scheduled reports that will send you the report in pdf.
The http access you are talking about is the xml reports, these are very restricted in what you can see.
However we do have a Reporting API that your local SE should be able to provide which means you can customise reports and get the information in .csv format. -
oops put the while question in the wrong place!!! but I'm at a loss on how to do this every picture I took everyone looks stretched when I use the crop tool any help would be much appreciated,
I have PS6
thank yousuzukidi wrote:
I have been trying so hard to try and get my head round this since your last comment so what I think I know is with my Nikon d80 having 3:2 aspect ratio pictures that I wanted printed can only be the sizes you mentioned above which is fine as the pictures I got printed were 9x6" but it's from now I'm still bit lost when I use the crop tool and pre set the size to 9x6" with a resolution of 240 and crop out all the bits I don't want it comes back from printers stretched so i'm still lost as I don't know the point where I'm doing something that causes the stretching? thank you for your patience
Lets separate this into topics Aspect Ratio, resolution and size ... etc
Aspect Ratio is just the ratio of an image's two sides. Your camera captures an image with a 3:2 Aspect Ratio. If you want to print the whole image your camera captures it can be printed and image size that has sides the have a 3:2 ratio without distorting the image.
Images are re-sized two ways:
One way is to keep the pixels your camera captures and print them at different resolutions. Resolution is nothing more then pixel size. Pixels have no size till there is a resolution set. Pixels themselves may have a aspect ratio themselves. These days most devices use square pixel. Some video standards use non square pixels. So if you have square pixels and an image with 1800px by 1200px and set the resolution to 300DPI the print size will be 6" by 4" if you set the to 200DPI the print size will be 9" by 6". Its simple math. 300DPI means pixels are 1/300"x1/300" there are 90,000px/inch 200DPI 1/200"x1/200" 40,000px/inch 100DPI 1/100"x1/100" 10,000. Note how quickly the pixel count climes as resolution increase doubling an image resolution requires four times as many pixels not two timas as many.
The other way is to create a new image using the pixels you camera captures. Your Camera pixels are resampled(interpolated) into a totally new image not a single camera captured pixel remains intact the new image has a different numbers of pixels it a different image. There are different interpolation methods some work better then others depending on image content and the direction of the re-size. Any time you resample an image you loose some image quality. The pixels are generated they are not captured using optics and a sensor.
Normally I do not resample when printing I just set the DPI so the image prints the size I want. In the Image size Dialog I un-check resample and the set the print width or height I want to print. Photoshop will calculate the DPI and set the other side size. If you crop without setting a DPI resolution in the crop tool the crop tool will not resample the crop to a particular DPI it should just set the appropriate DPI.
I resample image for the web Cameras capture more pixels then can be display by displays. So in the image size dialog I check resample and constrain the width and height to the image current aspect ratio then I set the number of pixels I want the width or height to be. Photoshop will calculate the number of pixels the other side will be. The DPI is meaningless for web images for Web images are displayed on screens at the resolution a displays has. Your images will display large on a large Low DPI resolution HDTV screen and small on a high resolution cell phone display.
If you want to print you image a size that does not have a 3:2 aspect ratio without distortion you need to crop you image to the aspect ratio you want to print at. You need to discard part of your image. The Crop Tool does not distort it discards part of you image. It may or may not resample the crop selected. I do not use the crop tool but if I did I would not use it to resample the crop I would not set in a DPI resolution in the crop tool.
Photoshop can also resize an image from one aspect ratio to and other aspect ratio a non constrained resize. The resulting image will be distorted. However Photoshop does have have a content aware re-size that tries to maintain recognizable objects perspective during the distortion process. This process can also be aided by user masking.
Cropping:
A 3:2 aspect ratio image can in theory be cropped to an infinite number of smaller images that have any aspect ratios including an infinite number of images that have a 3:2 aspect ratio. All crops can be resampled to a particular DPI resolution. However digital pixels can not be sliced up so there are a finite numbers of crops you can hack form a digital image -
Hi all,
I use the same applications for work, entertainment and other personal activities, so it's impossible to simply assign different apps to different desktops/spaces. Thus, I have open windows of the same programs (Pages, TextEdit, Preview) arranged on several desktops. If I reboot my laptop, the windows are just crammed on Desktop 1. Can something be done about it?Barney,
many thanks for your efforts and your time (preparing and posting the screenshot, answering to this question,...).
Unfortunately, moving the focus to the next window only works with windows on the same desktop.
btw, using a german keyboard layout and german language settings the shortcut is "cmd+<".
I can switch with this shortcut between different windows of my Safari which reside on the same desktop, but I cannot swith between different safari windows distributed over several desktops.
Thanks,
equi -
I just brought some song in iTunes, and add lyrics in it, can be display in MAC, but can't display in my IOS8 iPad . Please help!
For whatever reason the iPad will not display lyrics, I think its been this way since iOS 7. The iPhone will display them, but not iPad. I don't think its a bug, I think Apple wants it this way for some reason ... give your feedback here:
http://www.apple.com/feedback/ipad.html -
o/s Windows XP Home
vsn of Firefox 6.0.2
Step 1) open firefox
Step 2) copy link from address bar into clipboard
Step 3) compose message in Yahoo
Step 4) paste contents of clipboard into body of the e-mail
result: the pasted value does NOT become a hyperlink
<on same pc, with same contents in clipboard>
Step 5) open IE
Step 6) compose message in Yahoo
Step 7) paste contents of clipboard into body of the e-mail
result: the pasted value becomes a hyperlink ... the fact that the link becomes a hyperlink in the IE browser makes me think that there may be something in the Firefox browser that is controlling whether the pasted value becomes a link.
I'm not sure, but I believe the update to firefox 6.0.2 was with the past few days.
I'm not sure, but I do not believe the symptoms from steps 1 - 4 were present a few days ago
Questions:
1) could this feature have been introduced in 6.0.2?
2) I would prefer it if the pasted value would become a
hyperlink when working in firefox; what steps do I need to take to make this happen?
Thank youNow Tony, I know you can't hear my tone on a forum post but I was not complaining, simply stating facts . This change brought several people in my office to a grinding halt in a long established workflow that is really rather simple (and I thought was already assumed from the original post above ):
1) Select a set of records in FileMaker Pro 12 and export only their e-mail addresses as a CSV file.
2) Open that CSV file in Excel.
3) Copy the column of e-mail address.
4) paste into the appropriate recipient field in Mail.
5) Send
If I were to complain it would be about Apple's typically opaque approach to updates. There is no granular explanation of why changes were made or even "what" changes were made.
Complaining is futile since Apple is Apple and is unlikely to change, but sometimes it is cathartic to "shout into the void" .
I had thought about doing something with a formula in Excel and your suggestion was simple and helpful. Again, however, it is only a workaround for a long established helpful behavior that Apple has inexplicably broken/removed in Mavericks Mail.
I, and the other posters here, would love to have the capability back rather than have to add previously unneeded steps to our workflows.
Ultimately we may add scripting steps to the FileMaker side to export the address lists with commas inserted already if Apple ends up having permanently removed this feature. -
How can I delete a app from the Mac App Store completely?
I have a apllication which had a error. I delete it and download the app from the Mac App Store again, but the error wasn't delete. My iMac had stored it and the Error wasn't deleted so I can't youse the app.
What can I do to delete the app complete?
Please answer.If your App was faulty in some way you should write to iTunes support. If you simply want to delete it, most Apps carry uninstall (not delete) instructions.
Incidentally, I believe you cannot delete the record of your purchase from iTunes. That will always stay on your purchases list and be marked with a dark grey square as INSTALL.. -
My wireless keyboard disconnects and reconnects within seconds but all text that was typed during the time offline is missing. i have to go back and retype missing parts. What can I do to troubleshoot this. The computer is only about six month old. This problem is new in the last couple weeks. Thanks for suggestions.
Beat me to it, Donald. But there is a possible alternative. If the batteries have been replaced since new, were they replaced with the same batteries or another make. There are examples around which do not fit perfectly and leave a certain amount of movement inside the battery housing. That could lead to instability such as the OP describes.
-
How can I print a list of the apps I have on my iPad and iPhone ?
I had to reinstall all my apps when I upgraded to the new iOS - while some were listed in my 'purchased' list a lot weren't and I had to go through all my iPhone apps to see what was missing. And my folders all vanished as well! Any hints or tips before I upgrade the iPhone ?
Sheila BrowninTake a photo of each page of your Phone's Home screen with your iPad's camera. This will not only give you a record of the apps but what page of the screen you had them on!
I do not have an iPhone but if it gives the facility of storing multlple apps in a folder then make sure that they are ungrouped before taking the photographs. -
How can I get iCloud to use the same Apple ID on my Mac and iOS devices
I have an Apple ID that syncs between my iPhone and iPad. The Apple ID on my Mac is different and I cannot change it so it uses the same Apple ID and iCloud account.
Sign out of the Apple ID on your Mac and sign in to the one you want to use. Go to System Preferences>iCloud>Sign Out
Then sign in to the Apple ID you use with your iPhone and iPad.
Maybe you are looking for
-
How can i get all the tabs i had last time?
when i closed my browser and all tabs, then opened the browser it didn't restore my session or give the option to restore it, i have restore tabs from last time checked. I really need to restore that session, there were very important tabs that i don
-
IPod Shuffle mount problem in 10.4.3 ??
My iPod Shuffle was last updated on my girlfriends iBook (10.4.2), when I try to mount it on my PowerBook (10.4.3) the yellow lamp just blinks, but it dosn´t show i finder, iTunes or system.log The system update to 10.4.3 is the only diference from w
-
I received the following error message when installing the software for Nomad Jukebox Zen Xtra: "Sonic update manager has encountered a problem and needs to close." Microsoft window appeared to report the problem. I reported it and its message was: "
-
Why is the LaCie copy silent on DVD player?
Friends, After several frustrating hours (LaCie's readme only tells me how to connect to LaCie's readme--it should say, "if you are reading this don't bother to read this.") I finally burned a DVD. It was made from a videocam film that we had copied
-
Does PDFMaker damage a template Normal.dot?
I have installed Adobe Acrobat 9 Standard and noticed that editor MS office Word has a strange exit. It will now always asks and offers to save Normal.dot with next message. =========================================== "The general template "Normal.do