How can I put two photos in one 6x4 print??

Hello!! So I want to print out some of my photos for a scrapbook.
I however do not want them all to be 6x4 sized prints and making smaller ones (scrapbook prints) at the photo shops cost too much.
There HAS to be a way to just put two separate photos into one photo jpeg type file right? That way I can print them out normally and just cut them in half so some are smaller?
Any help?
Much appreciated!

Your question is not clear
do you want to
1 - put two separate photos into one photo jpeg type file
Or do you want to print two photos on one sheet of paper so you can
2 - can print them out normally and just cut them in half so some are smaller
For 1 you need an external editor - you can do it in pages for example
for 2 you simply select the two photos, crop them so they will fit and print selecting the printer, paper size and print size (slightly smaller than 3x4 since there needs to be a small border around them and between them), if the priview does not show two photos on the page click customize and in setting select multiple photos per page - the preview will reflect this selection and finish printing
LN

Similar Messages

How can I arrange 6 photos onto one 6x4 print in iPhoto?

I am trying to arrange 6 cropped square photos onto one 6x4 size photo so that I can print them. I am using iPhoto 11 but I can't figure out if I can do this. Any suggestions are appreciated.

Select the 6 photos you want to print and type Command+P. In the print window select paper size as 4x6 borderless and click on the Custom print size. Start with a custom print size of 1.5 x 1.5. That will give you this:
You can up the custom size a little bit at a time till you get the largest 6 photos on that one page.
OT

HELP!!! How can I put two phones on one comp??

So here's the deal, my mom bought an iPhone yesterday and I plugged it into the computer and entered HER account information. Including her appleID & everything. Both of our phones are named differently as well. Then I put some of the apps that I had in the library that I thought she would want. Then when she went to download a new app herself on her phone, it asked for my appleID password instead of hers?! How can I fix this??

You will need to reset her phone but from a new user account on the computer for her exclusive use, her own iTunes library, etc. She can use her own Apple ID but she will need to purchase her own apps.
Create a new user account on the computer for her to use. Then sync her iPhone with iTunes in her account. This will essentially remove everything from her phone - like a reset. She can then populate her iTunes, iCal, Address Book, etc. Once that's done resync her phone.
Please Get the iPhone User Manual for iOS 5

In my class i am suppose to do a before and after shot, how do i have two photos on one page

before and after shots..how do i put two photos on one page?? please help

Good day!
As Photoshop is not a page layout application but primarily image editing software the concept of "page" has limited relevance.
Anyway, you could increase the canvas (Image > Canvas Size) and place the other image (File > Place …) or drag and drop it.
Or create a new image and place both images. Whether doing so as Embedded or Linked Smart Objects makes more sense depends on your workflow, I guess.
File > Automate > Contact Sheet II would be another option.
Regards,
Pfaffenbichler

How can I move a photo from one project to another

How can I move a photo from one project to another without creating a duplicate so I have the same photo in two projects.
I seems to me in the past when I moved the photo from project 1 to project 2, I would get a number showing the # of photos being moved and you could drag and drop in the 2nd folder and the photos would disappear from project 1 and show up in project 2. is there a setting I am missing. Now when I drag and drop the photo no red # shows up and the photo stays in project 1 and also shows up in project 2 apparently creating a duplicate.
Any suggestion?

Now when I drag and drop the photo no red # shows up and the photo stays in project 1 and also shows up in project 2 apparently creating a duplicate.
The projects are the basic containers. Each image and all its versions are in exactly one project.
You can use an image in many albums, without duplicating it, also in many products like books, screensaver, slideshows. But the projects are the basic structure of the library and you cannot have the same image in two different project, without duplicating it by storing the same original image files twice. Use albums to organize your library thematically.
Sorry, I misread your question. Dragging an image file between projects should move the image and all its versions to the other project. Aperture should only duplicate the image, if you hold down the alt/options key while dragging and move the image otherwise.
Which Aperture version are you using? And which MacOS X version? Is your profile signature "MacBook Pro with Retina display, Mac OS 9.2.x, Aperture 3.5.1" still valid?
In Aperture 3.6 on MacOS X 10.10.1 dragging between projects is still working as expected:

Can i put two ipods on one itunes

can i put two ipods on one itunes

The OP didn't ask how. They only asked if it was possible, which would consist of either a yes or no answer, which is exactly what Niel provided.
If the OP wanted more information, they will respond asking for more information.
B-rock

How can I pass the photos from one iphone to another?

how can I pass the photos from one iphone to another?

Use the Beaming feature. See the info at the ? In iPhoto for iOS.

How can I put my photo icon in iMessage on an iPad mini? The is a photo of a wet leaf there now, and I can't get rid of it.

How can I put my photo icon in iMessage on an iPad mini? The is a photo of a wet leaf there now, and I can't get rid of it.

Did you try changing your picture in your contacts.

HT201317 How can I put my photos on ICoud for my computer?

How can I put my photos on ICloud for my computer?

Hello JCohee,
Doing so will require installing the iCloud Control Panel, which can be downloaded from the following link.
iCloud Control Panel 3.1 for Windows
http://support.apple.com/kb/DL1455
Once the iCloud Control Panel is installed, the following article will step you through the process of setting up and using your Photo Stream.
iCloud: Set up Photo Stream
http://support.apple.com/kb/PH2605
Cheers,
Allen

How can I make two Canvas in one Window ?

I want in the main window ( that is only window in the module ) press button to appear another canvas.
but that I can't make it , I just made two window until the another window appear.
that's all
I tried with :-
show_view('canvas_name');
but didn't work with me Sad
the another canvas made it stacked Canvas .... but also didn't work Sad
so please , How can I make two Canvas in one Window only ?
and thanks in advance

this code work with me :-
show_view('canvas name');
go_block(block_name');
execute_query;
for HIDE button u have to write...
hide_view('canvas_name');
but
that not exactly what I want ...... I want the stacked canvas appear like second window , and could control on it like window .... it could be possible ????

How can i put 2 photos or more in one (Aperture 3)?

I am using aperture 3 and I am planning to make an album where i can put many photos in one page, in different styles. I hope someone can help me with this. Thanks!

Hi,
Someone asked a similar question a few days ago. You can of course use the book or light table tools within Aperture. You can also use the method I described here:
"Another option no one talked about: for a simple sequence or grid of images don't forget Aperture's Print window. You can combine images in many different ways and save your layouts as presets.
I use the Save PDF to Aperture print workflow that's incredibly useful in this case. Here's an example:
1) I select the images I want to use in my layout. If I'm doing a triptych I choose three. The trick is to select them in the order I want them to appear on the page (Aperture follows that order).
2) In the Print window I choose my triptych layout and preview the results. I hit Print.
3) In the print dialog I click on the PDF button and select Save PDF to Aperture.
The workflow processes the file and at the end gives me a choice of format (JPEG, TIFF or PDF), destination project and name.
It also applies all the image adjustment options and the selected colorsync profile from the Print window to the results, which opens up several possibilities.
What this won't allow is any sort of overlap/transparency. The images are on a grid. But it's very convenient."
The entire thread can be found here
Best

How do I put two songs in one movie

I was wanting to know how to put two songs in one movie because I am making a holiday movie so I was wanting to know

You can only use one audio track per movie. If your movie is shorter than the audio track, then the audio track fades out automatically. If your movie is longer than the audio track, then the audio track loops automatically.
Also note that only non-DRM music can be added to a project.

How can I put my podcasts in one place and my music in another?

How can I put my playlists on my NAS media server (Buffalo Linkstation mini) so I can access them through Home Sharing and Sonos? FYI, right now I run my iTunes with media location on my laptop's c: drive so I can manage podcasts while on the go and map a lettered network drive to the media server device when I connect up at home.

Duplicated: https://support.mozilla.com/en-US/questions/886179

How do I put two strings in one "string dialog box"

example:
testing connection.....Pass
testing speed..........Pass
testing motors.........Failed
I send a string to a device and receive a string from this device.
it is easy to print the string in a dialog box. but the problem is that the next string I get from the device overwrites the previous string.
how can I put all incoming strings under oneanother?

If you are using a while loop you can put a shift register inside, what else you need is a concatenated string input which will accept your string in the first input and the EOL char in the second.
If you have a subvi, connect the string to the subvi's input and take the concatenated string at the output
Take a vi in 6.1 as an example
There are 10 kind of persons. Those who understand binaries and the others.
Attachments:
test1.vi ‏16 KB

How do I put two photos side by side with no space so I can order a 16x20 posterusing adobe photo elements 6.0 on my Mac

I have two photos that I want to merge side by side so I can order a 16x20 poster using adobe photo elements 6.0. Someone did it for me before, but I have tried to no avail.

Hi Neale,
Thanks for replying. The painting was scanned at a resolution of 300 dpi both times. I assume that's ample for this purpose?
Yes, one image shows glare in one direction and the other image another direction and I'm trying to blend the non-glare elements of both images.
Using a mask to paint in the non-glare elements is likely what I'll need to do.
Here are some screenshots of the scanned oil sketch that show how far I've gotten and the problem.
Above is a detail showing what I mean about the glare from the brush strokes. In a good artist grade print you wouldn't see so much of the glare.
I've got a backround and a layer - one is the 'top to bottom scan' and one is the 'side to side scan'.
When I put the one layer over the other it's a blurry mess. The only thing I can think of is that one scan is ever so slightly tilted causing it to distort.
Let me know what you think. If it helps, the scanner is the 'Canon Canoscan 9000F Mark II'.
Sorry if I'm a bit of a newcomer at this. I've had Photoshop Elements 7 for a while now but have only been using it for common purposes and I'd really like to learn how to take advantage of all the features and tricks it can do.
Cheers,
Andrew

How can I put two photos in one 6x4 print??

Similar Messages

Maybe you are looking for