How can I quickly upgrade my plan (without phoning in)?

I exceeded my text limit and need to add-on more texts or upgrade the plan before my billing cycle ends (tomorrow).
Each time I've had to do this previously I phone the support number and wait forever on hold, then plod through
the whole ordeal with a human. This takes way more time than I can afford - how can I modify my plan easily online?
thanks.

This is what comes up in my My Verizon homescreen:
I then select "Change features" under "PLAN". If you cannot find anything about adding texts under "Change features", you may try "Change Plan". As I have stated, I am unsure of where this would be since I am on a Talk and Text plan and don't have an option of adding additional texts since I have unlimited.
After selecting "Change features", you get this:
I would assume that adding texts would be available from this page if you were on just a talk plan. As you can see, at the top of this photo is a step for selecting the effective date. Hope this helps.

Similar Messages

  • Macbook upgraded from 10.5.8 to mountain lion. I lost the update when I tried to restore my old information. How can I get my update back without paying again?

    I took my mac to an iStore in South Africa however my country does not have an iStore. Macbook upgraded from 10.5.8 to mountain lion. I lost the update when I tried to restore my old information. How can I get my update back without paying again?

    Ok, that sounds like a valid approach...but now the question is, when you say you lost the upgrade when you tried to restore, exactly what do you mean?  Restore from a Time Machine backup, or another kind of backup?  What happened to the operating system when you did that?
    If it damaged the operating system, you should be able to recover it by restarting your computer holding either the Option key (should result in a grey screen that shows the macintosh hard drive and a recovery hard drive), or by holding the Command and R keys while starting.
    You can use the recovery hard drive to reinstall Mac OS X either way.  If the Option key restart, click on the recovery hard drive to boot from that.
    Then with either approach you will have a screen with a drop-down that gives you choices, such as install Mac OS X, Disk Utility, Terminal.  You will want to use Install (or Reinstall) Mac OS X...note, you must be connected to the internet from this point on.

  • I downloaded a song from i-tunes.  It plays on my computer, but won't play on my i-phone.  Any suggestions on how to fix this? Or how can I re-download the song without getting charged a second time.  I could not find an option to "report a problem".

    I downloaded a song from i-tunes.  It plays on my computer, but won't play on my i-phone.  Any suggestions on how to fix this? Or how can I re-download the song without getting charged a second time.  I could not find an option to "report a problem".

    I could not find an option to "report a problem".
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the item that is not playing properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
    (Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)

  • How can i quick edit Audio( increase bass) of a single file?

    Hi everyone,
    Im new to FCPX. I have a bunch of videos of music gigs ive played and would like to increase the bass (via equalizer) on most of them. All these videos are already converted into an "Apple Friendly" format and are sitting comfortably in my Itunes Video folder. How can i quickly increase the bass in each video (Without having to tediously export one by one) in FCPX and do a quick overwrite over the original video without having to make an EXTRA file?
    THanks

    ok.
    "Why don't you increase the bass with the equalizer in FCP? Do it to one clip and use paste attributes to apply it to other clips."
    1) How do i copy the attributes after making the changes??
    2) How do i paste the attributes onto the next file?
    Thanks.
    Re: How can i quick edit Audio( increase bass) of a single file? 

  • When i tried to download iOS8 on my iPad Mini it told me that I needed to connect my iPad to iTunes, I have done that and now it says I need to restore my iPad. How can I get my iPad working without losing everything on my iPad?

    When i tried to download iOS8 on my iPad Mini it told me that I needed to connect my iPad to iTunes, I have done that and now it says I need to restore my iPad. How can I get my iPad working without losing everything on my iPad? I don't want to lose my apps and photos!
    Help would be much appreciated!

    If you are getting the connect to iTunes screen then it's too late to take a new backup and/or copy anything off it. Prior to starting the update did you take a backup, either to the cloud and/or to your computer's iTunes ? If not then have you recently taken a backup that might have your photos and apps content/settings in it ?
    As long as the apps are still in your country's store then you should be able to redownload them via the Purchased tab in the App Store app (and the Purchased link under Quick Links on the right-hand side of the iTunes store homepage on your computer's iTunes), and if the apps store their content on a server/cloud service then you might be able to get their content back from that - if they store their content on the device then you will need to have a backup.
    For our photos you could try doing a search for programs that claim to be able to recover content from a device - I haven't used any so I can't suggest one.

  • I'd like to know how can u put letters on caps without holding all times the shift key?

    I'd like to know how can u put letters on caps without holding all times the shift key?

    Settings>General>Keyboard>Enable Caps Lock>On. Then just tap the shift key quickly.

  • HT4910 How can I increase my storage space without using a debit/credit card?

    HOw can I increase my iCloud storage without a credit/debit card!!

    Payment methods accepted include iTunes store credit, credit cards, and debit cards. If you do not have enough iTunes store credit to complete your upgrade, you will be charged the remaining amount.
    Purchasing iCloud storage and billing:
    http://support.apple.com/kb/HT4874

  • I've been trying to make an account with iTunes n everytime I get to the part of the credit card that's as far as I get because I dnt have one, how can I make an iTunes account without a credit card??

    I've been trying to make an account with iTunes n everytime I get to the part of the credit card that's as far as I get because I dnt have one, how can I make an iTunes account without a credit card??

    Where are you located?
    Just go and buy an iTunes gift card at any store in your country.
    Then follow all the steps you did, but when it asks you for the credit card number, there shoujld be a GIFT CARD option which will let you load your account witht eh funds form the gift card without providing a credit/debit card #.

  • How can I reset my lock passcode without plugging it into the computer or restoring it or resetting any data?

    I went I to my phone and I tried to unlock my passcode but it did not let me in, how can I reset my lock passcode without plugging it onto the computer on iTunes, or restoring it or deleting any data ?

    You don't. The only way to remove the passcode if forgotten is to restore the device. If you have a backup, you can restore to that last backup, but anything done since that last backup would be lost.Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support

  • How can I quickly view pdf files like I can do with Windows Picture and Fax viewer for jpg files?

    How can I quickly view pdf files like I can do with Windows Picture and Fax viewer for jpg files? I need to look at several thousand PDF files. It takes too long to open each one individually. The only thing I could think of is combining them into large groups and then using the Navigation index. But I like the way windows Picture and Fax Viewer does it because you can keep the files separate. Combining PDFs causes loss of individual file names. That would be a problem since I do need to have the individual file names.

    Windows Picture and Fax Viewer is a DLL and is started via a rundll32.exe call and can't be set as an application to handle images in Firefox 3 and later versions.
    Try to set Windows Picture and Fax Viewer as the default viewer in Windows, then it should be listed automatically in the Mozilla Firefox Browse dialog.
    *http://www.winhelponline.com/articles/115/1/Windows-Picture-and-Fax-Viewer-as-the-default-viewer-in-Mozilla-Firefox.html
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

  • How can I use a new computer without deleting everything on iPod?

    Hey Guys
    I need a bit of help.
    My old computer died, it was running Windows XP. I've got myself a new computer running Windows 7.
    I have a copy of my iTunes folders from my old computer (taken 2 days before it died)
    How can I use a new computer without deleting everything on iPod touch?
    I've imported all the folders (music, apps etc) into the new computer's iTunes, but when I sync my iPod
    I receive a window asking if i want to sync i need to erase and replace with the iTunes library on the computer.
    I particularly don't want to do this.
    My wife also uses my iTunes for her iPhone.
    Any help would be appreciated. Thank you

    Make a backup of the iPod by connecting the iPod to the computer and right clicking on the iPod under Devices in iTunes and selecting Backup. Then restore the iPod from that backup and sync as necessary.

  • How can I manage six email accounts WITHOUT them all appearing (twice) in the Folders column?

    How can I manage six email accounts WITHOUT them all appearing (twice) in the Folders column?
    All I need is ONE INBOX (like Windows Mail used to do) ...
    I can see in the 'Account' column of each message which email account it's using.
    Then, I either junk or read the message, followed by delete or file to one of my created folders.
    As it is, half my page is depth is taken up by 12 lines of Account names !!!

    That still leaves SIX lines of Account names down the side. All I want is ONE INBOX ... (I can see which account each message belongs to in the 'Account' column...)

  • My iPhone has two computers in (iTunes wifi sync), how can I remove one of them without using it ?

    Hello everyone.
    My iPhone has two computers in (iTunes wifi sync) how can I remove one of them without using that computer?
    because that PC stopped working so I had to recover it. Now everything is gone on that PC.
    Also I bought a new computer (MacBook Pro) and I use iTunes on it in the mean time. Now I want to remove the old computer!
    here is a photo of my (iTunes WiFi sync)
    is there any way that I can use to do that?
    Thanks

    Hello,
    Did you ever find a solution for this ?
    I have the same issue and i dont know how to fix it.

  • How can I delete an e-mail without opening it?

    How can I delete an e-mail without opening it?

    You can select another email that is not important/you want to delete then hold down the command key and highlight the email you don't want to open. Then click on delete!

  • My old email address was hacked and I am no longer able to access it. How can i reset my icloud ID without losing all of my pictures and more inportantly contacts? I have created a new ID but i cannot seem to use it until I delete the old account

    my old email address was hacked and I am no longer able to access it. How can i reset my icloud ID without losing all of my pictures and more importantly contacts? I have created a new ID but i cannot seem to use it until I delete the old account

    You need to use the old ID and password to delete the iCloud account. After you delete the old account, you can sign in with the new ID in iCloud.
    Have you seen this.
    http://support.apple.com/kb/HT5796
    iCloud
    iOS 6 and later: Go to Settings > iCloud.
    If you signed out before changing your Apple ID, enter your current Apple ID to sign in. The data from your iCloud account will download to your device.
    If you're still signed in with your previous Apple ID:
    Scroll down and tap Delete Account. Depending on what iCloud options are turned on, you'll be asked to confirm that you want to delete data from your device. To confirm, tap Delete. (If you're using iOS 7 and have Find My iPhone turned on, you'll be asked to enter the password for your previous Apple ID. Enter the password, then tap Turn Off.) The data will be deleted from your device, but not from iCloud.
    Enter your current Apple ID to sign in. The data from your iCloud account will download again to your device.

Maybe you are looking for

  • HT3951 how do you stop a download of a movie if you dont have enough space and how do you get the money refunded to your account

    how do you stop a download of a movie if you dont have enough space and how do you get the money refunded to your account

  • Background job output

    I schedule a job in backgroung proces(smartform). Whwn i click on the spool  to see the output ,  there is  error  "NO FRONTEND AVAILABALE" . how can i see my output of the back ground  job (smartforms). i am executing the process  like  1. tcode run

  • Cannot extract Zip file with Winzip after zipping with java.util.zip

    Hi all, I write a class for zip and unzip the text files together which can be zip and unzip successfully with Java platform. However, I cannot extract the zip file with Winzip or even WinRAR after zipping with Java platform. Please help to comment,

  • Tolerance @ GR

    Gurus, I have a question regarding the quantity tolerance limit at the time of GR. Let's say, if Plant A orders 100 units of Material 1 from Plant B through a STO. And if plant A does the goods issue of 100 units and when plant B tries to receive the

  • Address book... change list of messengers.

    I would like to change list of messenger that is available in Address Book. Now you can choose among these messenger: Jabber, MSN, Yahoo, AIM and ICQ. I would like to add, for example Skype. How can I do? Is there a way to change that list? Thanks