How can I raise the audio level of just a PORTION of a clip (not the whole thing)?

Would like to raise the level of one part of my project but NOT the other. This only seems to allow me to raise the entire project, but not individual sections. Earlier versions of iMovie had the ability to crossfade several audio tracks, etc., but this 'new and improved' one doesn't. Am I missing something?
Have tried separating the audio, but that doesn't help.
Thanks,
Cameron

Cameron,
Have a look at this article:
http://docs.info.apple.com/article.html?path=iMovie/9.0/en/mov3b0fb5f2.html
You can adjust only a portion of the audio of a clip without further splitting it.
Matt

Similar Messages

  • HT1212 I was given an ipod and it has been disabled and I have tried to hook it up to itunes but it won't sync....how can I reset the whole thing so I can use it?

    I was given an ipod and it has been disabled and I have tried to hook it up to itunes and it won't sync

    Restore, if iTunes will let you.  Everything except the password will be restored.  Connect via cable to the computer that you use for sync.  Be forewarned that it takes a long time.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • How can I see the whole week with calendar built-in app ?

    How can I see the whole week with calendar built-in app ? My husband has an ipad and he can see the whole week and the whole year... is it possible with iphone 4 ?

    What you see is what is available.
    Turning the iPhone into landscape mode with Month, Day, or List view selected provides the closest thing to seeing an entire week.

  • HT201272 How can I see the whole week with calendar built-in app ?

    How can I see the whole week with calendar built-in app ?  My husband has an ipad and he can see the whole week and the whole year... is it possible with iphone 4 ?

    You have posted in the itunes store forum.  This has nothing to do with the itunes store.

  • When I try to print a photo from iphoto, I select the photo, click print and the preview shows there is a lot of the photo cut off.  It also prints this way.  How can I print the whole picture?

    When I try to print a photo from iphoto, I click print and the preview shows a lot of the photo cut off.  It also prints this way.  How can I print the whole photo?

    After selecting File > Print, a pop-up window should appear. Select "Customize" and this should take you back into a panel within iPhoto. Towards the bottom, you should see an option for "Layout". Select this option and choose the correct photo orientation.
    Hope this helps!

  • How can I copy the whole directory of files from PC to iPad?

    How can I copy the whole directory of files from PC to iPad ?

    Get an app that reads PDF's, such as iBooks or GoodReader or Readdle Docs, then use the file transfer part of iTUnes to get those files to your iPad, through iTunes. ( I have no experience with goodreader, but with ReaddleDocs you can move the files, then create folders to put them in to keep them organized)

  • How can I get the whole URL to my BSP Controller

    Hi,
    I need to build up a html-link with my bsp-url. How can I get the whole url to a specific controller, but without the session-id (sap(id))?
    I need something like the following:
    http://server:port/sap/bc/bsp/sap/<application>/<controller>.do
    Thank You!

    Hi Arne,
    you can create the URL with the method:
    CALL METHOD cl_bsp_runtime=>if_bsp_runtime~construct_bsp_url
       EXPORTING
          in_application_ns = ...
          in_application    = ...
          in_page           = ...
          in_parameters     = ...
        IMPORTING
          out_abs_url    = ....
    Regards,
    Rainer

  • I set up time capsule using a wireless 4g modem.  it's been five hours and it still is saying making backup disk available (4.97 GB of 18.52 GB).  Can I stop the whole thing, get a ethernet cable and start over to increase the speed of the backup?

    I set up a new time capsule on a wireless 4g modem.  I started the initial backup.  It's been five hours and it still says "making backup disk available (4.97 GB of 18.52 GB)."  Can I stop the whole thing, connect my computer to the time machine using an ethernet cable and start over to increase the speed of the backup?
    Thanks,
    David

    Bunce wrote:
    oh i already did that. Im working on my imac and looking into this on my macbook. Was able to reproduce the issue again by trying to open TM. Locked out the finder again and had to restart. I checked the serial number and it was an early 2009 purchase with no coverage.
    If you bought a Mac and got AppleCare with it, within 2 years of buying the TC, the TC is covered, too.
    I have to admit that this $500 unit was the first to apparently junk out. The western digital that had my main data on that is my daily external that I store about 2TB of data on is still perfect and the new technology TM appears to already be cashed. Love the computers, not to big of a fan on the externals of the apple TV's. No life expectancy. Neither here nor there.
    suggestions before I either get this looked at or scrap the HD on it and move forward.?
    Reset the TC. See [Resetting an AirPort Base Station or Time Capsule FAQ|http://support.apple.com/kb/ht3728].
    Try a "full reset" of Time Machine, per #A4 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum).
    If all else fails, take it to your local Apple Store or Authorized Repair location, they may be able to determine whether the disk is dead.
    If it is, they might replace the TC for you. If not, they won't repair it, but if the electronics are ok, you can replace the HD yourself, if you want to. See http://discussions.apple.com/thread.jspa?threadID=2542983

  • I download, but always saves files of 1KB.  How can I save the whole file.

    I registered the unlock of QT Pro. I try to download, it tries to save audio file as something.mov, but the file is 1KB in size. It actually does not save the whole thing.
    How can save the whole file from a URL?
    Thanks,
    Juan

    The site is probably using pointer movies which may indicate that the movies are streaming and so cannot be saved. I'd suggest checking with site's support staff and ask if the movies are downloadable or are streaming only.

  • I have a macbook pro 17".  How can I change the way things look?  The page only takes about half of the screen and the fonts are fairly small.  I am sure there is an easy adjustment.  Please clue me in.  Thanks

    I have a macbook pro 17".  I love the big screen, but how can I change the display?  The content takes about half of the screen and the fonts are very small.  I am sure it is an easy fix, so please clue me in.  Thanks

    Look at your >System Preferences>Displays

  • How can I save the whole iphoto on mypassport?

    Hi,
    how can I change the settings of mypassport to save iphoto folders and photos all 5 hours
    on the mypassport?
    Thank's for helping Philipp

    Philipp_T wrote:
    Thanks.
    But is the iphoto library than only on the external drive or is it on the iMac AND on the external drive?
    The old library file will still exist on the internal drive unless you delete it yourself. But iPhoto will not use it once you have selected the copy on the external drive, so nothing you add or remove to the library after you make the move will be reflected in the old copy on the internal drive.
    Regards.

  • How can I raise the volume on a video clip in Premiere Elements 12?

    I want to raise the volume on a video clip in Premiere Elements 12. Can anyone help?

    jcomput
    Always good to give the computer operating system involved in case any computer specific details needed to be included. But here is your
    generalized yet specific answer for Premiere Elements 12 and increasing the volume of a video clip.
    If you are in the Expert workspace...
    a. click and drag upward the orange band that runs horizontally through the middle of the audio clip.
    or
    b. go to Adjust Tab/Adjustments Palette/ Volume Panel expanded on move the volume slide toward +6 dB.
    0 db does not represent no sound. It represents the volume of the sound when it was recorded. 0 to +6 dB increases the sound above the recording level; 0 to infinity symbol decreases the sound below the recording level, finally to muted sound.
    Please let us know if you are OK with the details above. My blog post on PE12: Audio Features may be useful to you.
    ATR Premiere Elements Troubleshooting: PE12: Audio Features
    Thank you.
    ATR

  • I have a orange audio bar that doesn't extend to the end of the video clip. How can I get the whole audio?

    In my video clip there is an orange bar that does't extend to the end of the clip. I think this is an audio bar. How do I get the full audio to play when I move the clip to the project?

    Did you try to set it up "as new ipod" without using the latest backup? The backup might contain damaged data causing your problem. If setting up "as new" does not work, you'll have to get it serviced.
    Setting up as new device and transferring data before doing this is covered here: http://support.apple.com/kb/HT4137

  • How can I customize the whole oracle webcenter portal

    We have a project that uses oracle webcenter portal. I want to customize it starting to its landing page til the content. I tried using extending webcenter spaces project but my build.xml has an error in clicking clean-stage. I followed the instructions correctly but still not working. I also tried following the tutorial about customizing at runtime, it works but its only for a specific tab. Is there any other way in customizing the product?
    here is the error in build.xml:
    Buildfile: C:\Users\Admin\Documents\JDeveloper\mywork\ExtendWebCenterSpaces\CustomWebCenterSpacesWAR\build.xml
    [taskdef] Could not load definitions from resource net/sf/antcontrib/antcontrib.properties. It could not be found.
    [taskdef] Could not load definitions from resource net/sf/antcontrib/antcontrib.properties. It could not be found.
    clean:
    [echo] ----------------------------
    [echo] ----Cleaning deploy directory ---
    [echo] ----------------------------
    init:
    pre-compile:
    [echo] ----------------------------
    [echo] ----Updating the manifest file with the
    correct version specification and implementation version
    [echo] ----------------------------
    BUILD FAILED
    C:\Users\Admin\Documents\JDeveloper\mywork\ExtendWebCenterSpaces\CustomWebCenterSpacesWAR\internal-targets.xml:85: Problem: failed to create task or type if
    Cause: The name is undefined.
    Action: Check the spelling.
    Action: Check that any custom tasks/types have been declared.
    Action: Check that any <presetdef>/<macrodef> declarations have taken place.
    Total time: 1 second
    can you help me in configuring config.properties to an application server?
    check if my configuration is right:
    #My properties
    #Fri Jul 30 00:00:00 PDT 2010
    ############ User Inputs Required ###################
    ## Enter the base directory where JDeveloper is installed.
    ## For example:
    ## On Windows, if JDeveloper is installed in the directory
    ## C:\MYJDEV, enter the path as: C:\\MYJDEV
    ## On Linux, if JDeveloper is installed in the directory /scratch/MYJDEV,
    ## enter the path as: /scratch/mywork/MYJDEV
    ## Note that the JDeveloper directory contains other folders such as jdeveloper,
    ## wlserver_10.3, modules, and so on.
    #jdeveloper.install.home.directory=C:\\rohit\\jdev\\ps2\\jdevfinal
    jdeveloper.install.home.directory=C:\\Oracle\\Middleware\\jdeveloper ---------------------->my jdeveloper path
    ## Enter the wlst executable
    ## For example:
    ## On Windows, wlst.cmd
    ## On Linux, wlst.sh
    #wlst.executable=wlst.cmd
    wlst.executable=wlst.cmd ---------------------->my wlst executable
    ## Enter the absolute path of the ExtendWebCenterSpaces project.
    ## For example:
    ## On Windows, enter the path as:
    ## extending.spaces.home.dir=C:\\JDeveloper\\mywork\\ExtendWebCenterSpaces
    ## On Linux, enter the path as:
    ## extending.spaces.home.dir=/scratch/mywork/ExtendWebCenterSpaces
    #extending.spaces.home.dir=C:\\rohit\\jdev\\ps2\\jdevfinal\\ExtendWebCenterSpaces_ps2\\ExtendWebCenterSpaces
    extending.spaces.home.dir=C:\\Users\\Admin\\Documents\\JDeveloper\\mywork\\ExtendWebCenterSpaces #my extendwebcenterspaces path
    ## Enter the path for ojdeploy.exe.
    ## For example:
    ## On Windows, enter the path as:
    ## oracle.jdeveloper.ojdeploy.path=${jdeveloper.install.home.directory}\\jdeveloper\\jdev\\bin\\ojdeploy.exe
    ## On Linux, enter the path as:
    ## oracle.jdeveloper.ojdeploy.path=${jdeveloper.install.home.directory}/jdeveloper/jdev/bin/ojdeploy
    #oracle.jdeveloper.ojdeploy.path=${jdeveloper.install.home.directory}/jdeveloper/jdev/bin/ojdeploy
    #oracle.jdeveloper.ojdeploy.path=${jdeveloper.install.home.directory}\\jdeveloper\\jdev\\bin\\ojdeploy.exe
    oracle.jdeveloper.ojdeploy.path=${jdeveloper.install.home.directory}\\jdeveloper\\jdev\\bin\\ojdeploy.exe ---------------------->is this right?
    ## Enter the port number on which the WLS Administration Console is running.
    ## The URL of the Administration Console contains the port number.
    ## For example: http://<host>:<port>/console
    wls.port=7001 ---------------------->my application server port
    ## Enter the WebCenter host machine on which you intend to deploy the
    ## custom.webcenter.spaces.jar shared library.
    wls.host=my.bir.gov.ph ---------------------->my application server
    ## For security purposes, administrator user name and password details
    ## are stored in secure files.
    ## Obtain the location of these secure files from your systems administrator
    ## or run WLST commands to generate these files as follows:
    ## 1. Navigate to: WC_ORACLE_HOME/common/bin
    ## 2. Enter the command: wlst.sh
    ## 3. At the WLST command prompt, connect to the Administration Server
    ## for Oracle WebCenter:
    ## connect('<admin_user>','<admin_pwd>', '<host>:<port>')
    ## Where admin_user is the user name of the administrator, admin_pwd is
    ## the administrator's password, host is the WebCenter instance, and port is
    ## the Administration Server port.
    ## 4. Run the following command to create a user configuration file and key file
    ## in a specified location:
    ## storeUserConfig('<userConfigFile>', <userKeyFile>')
    ## Where userConfigFile is the name and location of the file storing user details
    ## and userKeyFile is the name and location of the file storing passwords.
    ## For example:
    ## storeUserConfig('C:/myFiles/myuserconfigfile.secure', 'C:/myFiles/myuserkeyfile.secure')
    ## For example:
    ## On Windows, enter the path as:
    ## wls.userkey=C:\\JDeveloper\\mywork\\ps1userkeyfile.secure
    ## wls.userconfig=C:\\JDeveloper\\mywork\\ps1userconfigfile.secure
    ## On Linux, enter the path as:
    ## wls.userkey=/scratch/myfiles/ps1userkeyfile.secure
    ## wls.userconfig=/scratch/myfiles/ps1userconfigfile.secure
    ## Use the wls.userconfig property to set the userConfigFile path and
    ## the wls.userkey property to set the userKeyFile path.
    wls.userkey=C:\\JDeveloper\\mywork\\ps1userkeyfile.secure ---------------------->i dont know how can i configure this
    wls.userconfig=C:\\JDeveloper\\mywork\\ps1userconfigfile.secure ---------------------->i dont know how can i configure this
    ## Enter the targets on which the custom.webcenter.spaces.war file is deployed.
    ## Obtain this information from your systems administrator or from the
    ## WLS Administration Console as follows:
    ## 1. Login to WLS Administration Console.
    ## 2. Navigate to Deployments>custom.webcenter.spaces>Targets
    ## The list of servers display here.
    wls.target=WLS_Spaces,AdminServer ---------------------->application server target
    ## Enter the targets on which the webcenter.ear file is deployed.
    ## Obtain this information from your systems administrator or from the
    ## WLS Administration Console as follows:
    ## 1. Login to WLS Administration Console.
    ## 2. Navigate to Deployments> custom.webcenter.spaces>Targets
    ## The list of servers display here.
    wls.webcenter.app.target=WLS_Spaces---------------------->application server deployment target
    ## Enter the name of the WebCenter Spaces application.
    ## Obtain this information from your systems administrator or from the
    ## WLS Administration Console as follows:
    ## 1. Login to WLS Administration Console.
    ## 2. Navigate to Deployments> webcenter>Overview
    ## The application's name displays here.
    webcenter.app.name=webcenter ---------------------->name of my webcenter portal
    ## Use the restart.implementation.version.suffix property to override the next default
    ## implementation version number for custom.webcenter.spaces.war.
    ## You can obtain the current implementation version from your
    ## systems administrator or from the WLS Administration Console as follows:
    ## 1. Login to WLS Administration Console.
    ## 2. Navigate to Deployments> custom.webcenter.spaces>Overview
    ## The version number displays here. For example: 11.1.1.2.5
    ## The current implementation version is the last number, that is, 5 in this example.
    ## By default, the implementation version increments by 1 each time that you rebuild
    ## custom.webcenter.spaces.war (using Run Ant Target>clean-stage).
    ## You can restart at a higher value if necessary. For example, if the current value is
    ## 11.1.1.2.20 and you want the next new version to be 11.1.1.2.41 rather than
    ## 11.1.1.2.21, do so by resetting the restart.implementation.version.suffix property to 40.
    ## Note:
    ## The first time you run Run Ant Target>clean-stage, the manifestImpl.properties file
    ## is created and the manifest.implementation.version property is set to
    ## 11.1.1.2.1. This initial version number is derived from the default.implementation.version
    ## set in build.properties (11.1.1.2) and appended with the restart.implementation.version.suffix property below.
    ## For example, if the restart.implementation.version.suffix is set to 1, the initial
    ## manifest.implementation.version will be 11.1.1.2.1.
    ## During subsequent builds, the restart.implementation.version.suffix and the lastNumber property
    ## in manifestImpl.properties are compared, and the higher of the two numbers is incremented by 1.
    ## If, for any reason, the manifestImpl.properties file is deleted, the file is recreated the next time
    ## that you run Run Ant Target>clean-stage, and the implementation version resets using the
    ## restart.implementation.version.suffix only (as if for the first time). For example, 11.1.1.2.1,
    ## if the restart.implementation.version.suffix=1
    restart.implementation.version.suffix=3
    help me pls thx

    It assumes that you have this file available in your jdev
    ${jdeveloper.install.home.directory}/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar
    Add ant-contrib.jar into jdeveloper\modules\net.sf.antcontrib_1.0.0.0_1-0b2\lib directory. You can download it from http://ant-contrib.sourceforge.net/.
    Other useful advice:
    http://jwebcenter.blogspot.com/2011/05/how-configure-webcenter-space.html

  • How can I play the whole album, when I double click on the album it only plays the first track?

    How can I play all tracks on an album, when I double click on the album it only plays the first track?

    Make sure all the tracks are check-marked.

Maybe you are looking for

  • Check the code - URGENT!

    HI All, To fetch the fallowing required fields from the related tables by the selection criteria Material No and Posting dates. Using ALV. I have written code for that but its not showing any results..plz go through my code and if possible rectify it

  • Want to break down a date into 4 lines in one field

    Hi all, In report 10g , when a date value mask is like 'DY. MON. DD,YYYY' in a field, it will be display whole date 'Mon. Apr.14,2008' in one line but in the report i want it shows like below in one field (break in every word, four lines) because the

  • Add-on connection error (-105) Access to company database is not permitted

    Good day, One of our clients have upgraded to 8.8 PL 11 (from 2007A PL 41). Somehow the SBO-Common became corrupt and SAP suggested that we reinstall the SBO-Common. The problem is that now the add-on (developed by us) is not connecting. The add-on c

  • Java applet writes to file on client, no signing necessary

    Hi, I wonder if this is a feature or bug: I download and execute in my browser an unsigned applet/jar myCharts.jar from server. The applet references classes from package org.jfree.chart, which are not packed in myCharts.jar downloaded from server, b

  • How to make HtmlSelectManyCheckBox scrollable

    Hi, I have a requirement like , have to create the checkbox list dynamically. I am doing it through the binding. But i want to make the HtmlSelectManyCheckBox should be scrollable. I am doing as belwo HtmlPanelGrid innerGrid = new HtmlPanelGrid();