How can I re-install the GarageBand

I think I have accidentally deleted the GarageBand. Is it any way that I can re-install it?

Here you can tap on View in iTunes and download it again on your iPad; http://itunes.apple.com/app/garageband/id408709785?alreadyRedirected=1&mt=8

Similar Messages

  • How can I re-install the app?

    Indesign CC was trashed. Creative Cloud Shows app as "up to date". How can I re-install the app?

    Hi Notebook57,
    You first need to uninstall the application completely.
    In Mac :-- Applications --->Utilities --->Adobe Installers
    in Adobe installers you will find the uninstaller for Indesign CC just run that and complete the uninstallation.
    In window :-- Control panel ---> programs and features --> uninstall Indesign cc.
    After doing this you can launch Creative cloud desktop ---> log out and log back in.
    You should see the option to install the software again.
    Thanks
    Kapil Rupani

  • How can I re-install the last version of iPhoto, I hate this new version.

    How can I re-install the last version of iPhoto. I hate this new version "Photos 1.0" which installed yesterday on my iMac. Please help. My operating system is OS X YOSEMITE 10.10.3. THANKS.

    Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
    If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
    Install the App from the App Store.
    Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

  • How can i re install the OS if the software gets corrupted in OSX 10.8 ?

    how can i re install the OS if the software gets corrupted in OSX 10.8 ?

    If the hard disk is damaged:
    1. Press Command and R keys while your Mac is starting.
    2. Open Disk Uitlity, select Macintosh HD in the sidebar and repair the disk. If it can't be repaired, take your Mac to an Apple Store

  • I have hp 430 laptop,how can i re install the windows 7, if i not have original window on my laptop

    I have hp 430 laptop,how can i re install the windows 7, if i not have original windows on my laptop. i have oem number,
    But i have troubol to finishing installation of window.

    Originally the Notebook will have the Recovery Partition and that would give you an option to create a set of Recovery Disk. If you have not created those Recovery Disks when the Notebook was in working condition we cannot do that right now
    As of now if you need to recover your Notebook with the new Operating System you can check if the Recovery Partition is in a working condition or not, If yes you can easily recover/restore your Notebook
    If Recovery Partition is corrupted
    You need to call HP Technical Support and request for a set of Recovery Disks , So you can recover/restore your Notebook at the earliest
    OR
    You need call up Microsoft and purchase an Operating System with the License Key, So you can recover/restore your Notebook at the earliest
    I strongly recommend you to Contact HP Technical Support over the Phone for further assistance without any delay
    Hope this helps, for any further queries reply to the post and feel free to join us again
    **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    K N R K
    Although I am an HP employee, I am speaking for myself and not for HP

  • I inadvertently deleted and emptied the trash bin on Firefox. I have a MAC OSX-VERSION 10.4.11. How can I re-install the latest version of Firefox that is COMPUTER FRIENDLY for the MAC OSX Version 10.4.11? I appreciate any help.

    I inadvertently deleted Firefox and emptied the trash bin. I believe it was version 3.5. I have a MAC OSX 10.4.11. After several futile attemps how can I re-install the latest version of Firefox compatible to my MAC system? Thanks!

    As of Firefox 4.0 and newer the Firefox builds from Mozilla requires both Mac OSX 10.'''5'''+ and a Intel.
    Either you can use 3.6.19 from http://www.mozilla.com/en-US/firefox/all-older.html
    Though for you 3.6.18 will be safe also as 3.6.19 was to workaround a font crashing issue on 10.7 Lion that was not fixed in time on Lion before release. http://releases.mozilla.org/pub/mozilla.org/firefox/releases/3.6.18/mac/ and pick your language and download the Firefox 3.6.18.dmg

  • How can i re-install the operating system without deleting my files on the computer

    I'm Trying to re-install the operating system on my macbook, and i dont know, if i can only re-install the OS without deleting the Data on the computer.

    If the Snow Leopard version on your Snow Leopard DVD is lower than the Snow Leopard version on your computer, you will NOT in any case be able to re-install the OS the way you want it. You will only be able to erase your disk and then reinstall the OS.
    It will only "upgrade" and keep your files if the Mac OS X version of your Snow Leopard DVD is newer than the Snow Leopard version on your computer.

  • How can I re-install the Creative Cloud softwares on my new computer?

    Hello,
    I bought the Creative Cloud softwares and installed them on my former computer (which is unfortunately dead...). My license is still activated but I can't find how to download them on my new computer without buying them another time.
    Thanks for your help.
    Max

    The process will be identical as it was on your first computer.  Please see http://forums.adobe.com/message/4396277#4396277?tstart=0 for information on how to install the Creative Cloud applications.

  • How can I start install the design on FPGA

    hi ,
    i design a system on the labview 8.2 thats detect some parameter of the ECG signal , now i wnat to install the design on the FPGA kit 
    kown the input signal is real time ECG  signal .
    how can i start doing this ?
    what the needed informaton to do that ?
    thank you

    Hi - I just want to clarify that National Instruments does not make any signal conditioning modules or other products that are designed for direct connection to a human subject (we don't design or certify to the required medical safety standards).  Our products are often used in conjunction with amplifiers or signal conditioners that are designed for these applications that have outputs that are filtered, isolated, and amplified and are ready to be digitized by a DAQ board or other NI product.
    If used on animals, these safety concerns are often not as big an issue, but you still need a specialized signal conditioner that has a relatively high gain and balanced differential inputs (with high common-mode rejection) to acquire a good, low-noise ECG signal.  This is similar to a thermocouple type input module, but with more bandwidth than a typical thermocouple module and AC coupling.
    Bottom line:  you really need to use a specialized biosignal amplifier that has a single-ended analog output to connect to NI DAQ boards or FPGA boards.
    Steve J.
    National Instruments
    Visit the NI Biomedical User Group at:
    www.ni.com/biomedusers

  • My CD doesn't work how can I re-install the product after formatting the PC  , I do have the product key.

    Hi,
    I have formatted my PC , then when I tried to re-install the Adobe x standard , I noticed that the CD is damaged , I do have the product key so how can I retrieve the installation.
    Regards,

    Download the installer from Download Acrobat products | Standard, Pro | XI, X
    If you need more help, you better ask in the Acrobat forum (this is the Acrobat.com forum).

  • How can I re-install the OS with Deskstop Manager for Mac

    I just downloaded the Deskstop manager for Mac, tried to upgrade by BB software and it gave me the JVM Error 513. Luckily I backed up all info cause I know that means the whole thing is erased. How do I on a Mac re-install the software? When I connect it to the computer it does not recognize it?

    Hmm.. that is kind of weird. 
    I did a quick search and came up with this:
    http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB13003&sliceId=SAL_Pub...
    You should be able to restore software onto your BlackBerry by disconnecting and then reconnecting it. BlackBerry Desktop Manager will have show "Connecting" at the bottom of the window, and then it should eventually recognize that software needs to be releases onto it. 

  • How can i re-installed the update

    I use asha 308. I installed the new update 8.13. But the problem is that most of feature not working ;-( now plz somebody advise can i re-installad the update via my phone?

    Reinstalling the current SW version is not possible via the phone (only SW updates), but you can reinstall the phone SW with Nokia Suite. http://www.nokia.com/global/support/software-updat​e/asha-software-update
    http://www.microsoft.com/en/mobile/nokia-x-updates/
    http://www.microsoft.com/en/mobile/nokia-x2-update/
    http://www.microsoft.com/en/mobile/asha-software-update/
    http://www.microsoft.com/en/mobile/support/software-update/wp8-software-update/
    http://www.developer.nokia.com/Community/Wiki/Nokia_firmware_change_logs
    https://twitter.com/LumiaSWUpdates

  • How can i manually install the swz files in the assetcache!

    I have a computer that has no internet connection, and since i use components from SDK 4.1 and want to run my application anywhere,
    i need to do a "manual update of flash" and have it register the external swz files.
    If this is not possible, then maybe it could be possible to have all components compiled into one, and only one, swf file, so i can copy that file
    to the "offline" pc.
    I really believed, that the "merge into code" actually compiled everything into the code, but i must have misunderstood.
    I have tried to "reset" the swc components, so they do not use the download url, from adobe, but it makes no difference, and i have edited the flex-config.xml file in the SDK's framework folder, but no luck so far.
    Any hints are welcome,
    TIA
    Allan

    Hi Gurdeep
    I removed the fpdownload references, and set the use-network=false and the static-link-runtime-shared-libraries=true.
    i use the rpc_xx.swz, sparkskins_xx.swz, spark_xx.swz, texlayout_xx.swz, framework_xx.swz and osmf_flex_xx.swz libs.
    I have a master swf file, compiled in flash builder, and a child-swf that is loaded from the master (using the mx.swfloader), and the child is compiled using the mxmlc commandline compiler.
    I am investigating, if the child could be the culprit.
    I have tried to find a way to "install" the required components in the assetcache, but found no other way than "copying the swz and heu files" there myself.
    It actually works, but it would be nice to do this "the proper way"
    Thankx

  • How can you simple install the LabVIEW Toolboxes with LabVIEW 7.1

    Hello, yesterday was a nice day, I have receved the NI Developer Suite Professional Control Edition with the new LabVIEW 7.1, RT 7.1, DSC 7.1 etc.
    I still use Labview 7.0 (Developer Suite Professional Control Edition)
    Unfortunately I can't install the Toolboxes from the toolbox cd into the right directory!
    Always when I try to install a toolbox, it will be installed into the LabVIEW 7.0 directory. It is not possible to change the directory (exeption: SPC-Toolbox) Even if you change the name of your LabVIEW 7.0 Directory, the toolbox produce a new folder LabVIEW 7.0 and is getting instaled into this directory!!
    So please dear LabVIEW Developper think a bit more, when you release new software the nex
    t time...
    I know, there are always work around's but nobody does realy like them...

    Something is wrong about the registry keys of LabVIEW on your machine. Specifically the path string under "HKEY_LOCAL_MACHINE\SOFTWARE\National Instruments\LabVIEW\7.1" should point to the LabVIEW 7.1 directory on your machine.
    On VIAnalyzer and Report Gen Toolkit, when you install them, pick LabVIEW 7.1 directory on "Destination Folder" dialog. See attached screenshot. That should install it in proper location.
    A Rafiq
    Attachments:
    vianalyzer.JPG ‏44 KB

  • How can I un-install the Trial software?

    There is a glitch in the trial software I have been using, so I would prefer to un-install it and then buy the software for a fresh install. How do I make sure all the associated files are removed?

    MAC OS 10.8.2
    Pamela Clark
    [email protected]

Maybe you are looking for