How can I re-locate an audio track?

I moved the audio track that I'm using from iTunes so it shows a yellow hazard triangle within my iMovies project. I have moved the audio clip back to where it was in iTunes but iMovie can't find it, and I can't find an option to re-locate the clip. How do I re-locate?
I could just drag the audio back in and delete the original, but it had lots of editing already with volume and cutting bits out here and there that I don't want to have to repeat if possible.

If you hover your cursor over the yellow triangle, it may give you the path it is looking for.

Similar Messages

When i try to upload a .mts file from my Sony camera to Premiere Pro CC it refuses to play the audio! Ofcourse i could convert every single clip but it takes tons of time. How can i make Pr play audio track properly?

When i try to upload a .mts file from my Sony camera to Premiere Pro CC it refuses to play the audio! Ofcourse i could convert every single clip but it takes tons of time. How can i make Pr play audio track properly?

Does it not play at all or cannot you get the audio in the timeline?
Did you copy the entire card to the hdd and then imported the file via the Media Browser?
Did you source patch the audio tracks?

How can I make a synced audio track match the length of selected clips in a multicam seq?

I have a continuous multicam sequence of about 13 minutes containing a synced master audio track recorded from seperate microphones. I want to rearrange scenes from it into my final sequence, but when I select a range of clips to nest the entire length of audio gets pasted into the new sequence. I want to trim the audio to match just the clips I've selected but not lose sync. Is there a way to do this or is nesting not the way to chop up a sequence and rearrange the scenes in it?
Thanks.
Mike

Me too!!! I have a multicam sequence from 2 cameras with the audio staying on camera 1. I also have a seperate, continuous audio track recorded from microphones which I have synced to the timeline. I'm trying to select a group of sequential clips of different camera angles from the timeline to create scenes which I can insert into a final sequence but in a different order from how they are on the timeline. Let's say I want to take a series of clips that start at 3:30 on the timeline and go until 4:30 on the timeline. It will contain several cuts between the different cameras and I want to use that section as the first scene of my new sequence. If I select all of the clips in that time period and nest them into a new sequence, I only get the audio from camera 1 on the new TL. If I try window selecting those clips to include the continuous audio track, I get a new TL with 3 minutes and 30 seconds of the desired audio, then the video clips, and then the rest of the audio making a 13 minute TL. I just learned, after searching around, about marking in and out points on my multicam seq. and using the trick of "LIFTing" and then "UNDOing" to keep my multiseq intact, and then pasting into a new sequence. That works, but I'm only getting the audio track from off the camera. It won't select and lift the section of the other audio track that I want. I'm rushed for time so that's the way I've ended up finishing the video for now. The camera audio is just going to have to do although the mic recording is much better. The more I try to explain this the more confused I get and I'm sure everybody reading it does too. Any ideas? Thanks!

How can I shorten a single Audio track individually?

Hi!
I have multiple audio files in the same track copied to make a loop. When I try to shorten the last one, all of them get shortened at the same time. How can I only shorten one of them individually?

You probably made *Aliases or Clones* using the Repeat Regions command (⌘-R)...
But I'm not sure...
What do you mean by "multiple audio files in the same track copied to make a loop"? I can't really tell what that looks like... have you made duplicates and spread those over the track? By what method? *Repeat Regions* or ⌥-dragging?

How Can I Replace An Extracted Audio Track?

Yup, after I have extracted an audio track from the video track how can I replace it? Dragging & dropping isn't working neither is cutting & pasting. I wasn't able to find any info on this at all. Please don’t tell me it's irreversible. AAUUUUUUGHH!!
MacPro1,1 Mac OS X (10.4.8) Dual-Core Intel Xeon, Processor Speed: 3 GHz, Bus Speed:1.33 GHz, Memory:2 GB, Number Of Processors: 2,Boot ROM Version: MP11.005C.B04

ibblefum,
The extract audio command copies the audio from the selected clip and place it on the one of the two audio tracks. It then sets the audio in the original clip to zero.
To restore the audio in the original clip, just select it and raise the level back to 100%.
Matt

How can I position my added audio track?

Hi all,
I need to have a delayed start for my added audio track.
The music should only start 30 seconds after the movie starts.
I tried to position it manually to a second movie sequence but it doesn't seem to work... it will only place itself at the beginning.
If anybody has clue?
Thanks in advance.

Apple have made background music rather simple in iMovie.
You are allowed only one track, and it just starts at the top.
I have found the only way to do this is to create multiple projects that later are assembled together as a whole.
Not the nicest solution, but it works.
Duplicate the project,
then delete the 30 seconds you want music free, and add the music track,
save this new video out to the camera roll.
Open the origonal project, delete the bit you just added music to, and insert the other video you just made.
This way you can have multiple music tracks too .
I tend to edit the whole video, and then break it into parts to add music and adjust the edits.
Then assemble all the parts again for a final output.
This is reasonably quick for small home movies.
I realise that everytime you save to camera roll you lose quality of video;
but it is minimal and I also tend to archive out the iMovie Projects just in case I want to edit again later.
I tend to use 'Splice' or 'Voddio' if I want to edit more complex stuff and retain quality.

How to create a new independent audio track?

okay, probably a stupid question, but how can i create a new audio track that is not a "slave" to an already existing audio track. for example, all of my 8 audio tracks are in use, so when i try to open a new one, it is affected by the highlighted tracks specifications, making it very frustrating. please help and thanks.

Some things are just backward in Logic...we just have to get use too it.....
jord, I agree.. it's not that hard to understand the difference between an arrange track and an audio object. the fact that you can have many tracks in the arrangement that all use the same audio object or midi object is a great thing.
I think if people get their head around the fact that the arrange page _is not_ simply a representation of what is physically available in terms of tracks, then it all becomes clear.
I would recommend all new users to do the following:
click on your arrange window, and select the top track. start hitting delete until you have deleted every single track in the arrangement. you now have a blank page. but, importantly, the environment of available audio tracks/audio instruments/midi channels/whatever has not changed one single bit. you can now assign anything to your arrange page. 55 arrange tracks that are all using audio instrument 1 if you so desire. or, sequentially create new tracks that are all using subsequent channels/instruments by controlshiftreturn (by default).
people often get confused by doing the following: they create a new track in the arrangement - say they had audio instrument 1 and then created another _arrange track_ of audio instrument 1. then, they look in the parameter box for that second arrange track, and change it to audio instrument 2. then they get annoyed that for some reason, both tracks now change to audio instrument 2.. but this is totally normal, because you have changed the assigment of the same audio object, that just happened to be present in the arrangement in the form of 2 arrange tracks. the way to change what object is assigned to an arrange track is to click-hold on the track name (right there where the track is in the arrange list) and then you will see a pop up of all of the available objects, hierarchically presented to represent the environment layers in your song. or, instead of doing this, you can just create an arrange track that uses the next available audio track/instrument by using the key command described above (controlshiftreturn).
it's not at all illogical or backwards! when I am writing a midi part using an audio instrument, I (very) often want multiple arrange tracks of the same instrument so I can test out different ideas or variations.. muting all except the one I currently want to hear. and importantly, they aren't "copies" or "clones" of the same track, nor are they "linked" tracks that change assignment together, as many people seem to think. they are independant arrange tracks that just happen to have the same track or instrument assigned to them. once you get this, you start getting logic.
the way to build new audio objects or midi objects (which is what people mean when they say "new track") is and has always been in the environment. although, now there are shortcuts to do it by using the function 'create multiple tracks' which will produce the objects for you in the arrangement and add them to your arrangement in one operation. you also need to be aware of the setting in your audio prefs (or in hardware and drivers, can't remember which) where you define the maximum number of tracks that the audio engine will allow, this being another stalling point for many new users.
like I said, once you 'get' this architecture in your head, you start realising how powerful and flexible working on arrangements in logic will be. for me, it's a way better implementation than playlists in protools, for example.

How can I Import 2 channel audio from a Sony PMW300 camera?

How can I Import 2 channel audio from a Sony PMW300 camera?

Terry Woolf
Thanks for the reply.
The link to your prior thread is
Audio
I suspect that the issue of no audio for your .mp4 file goes to your conversion method MXF to .mp4.
Please excuse if I am saying what you already know. When you import your video into Premiere Elements (in your case 12 Mac), a project
preset is established, either by you manually or the project automatically. That project preset contains a description of the project settings
for audio as well as video. Unless you select one of the project presets which are described for use with 5.1 channel, your audio in video audio
imports into a stereo project. It is in the export area that you will find your opportunity to customize (if necessary) the settings for audio.
In the project, if applicable to your situation, you can duplicate an audio channel (See Fill Left or Fill Right under fx Effects/Audio Effects).
Please let me ask this to make sure of the details.
If you import your .mp4 with 2 channel audio (derived from your .mxf convert and dragged to Video Track 1/Audio Track 1) and cannot hear the sound....
a. do you see any evidence for an audio file in the Timeline Audio track 1?
b. if you do, how many wave forms do you see, one or two?
c. if you have the audio meters opened while you are playing back the Timeline content in Edit area, do you see 1 or 2 channels and is
there activity in both.
d. when you import the file into Project Assets, do you observe any conforming activity going on in progress bar in the lower right cover of the workspace...if
so, do you wait for it to go to completion before continuing on?
We could also try deleting the conformed audio in the Media Cache Files Folder to force the program to re-conform the audio. See Edit Menu/Preferences/Scratch Disks should show you the location of the Media Cache Files Folder whose contents you will be deleting.
Please review and consider, and then let me know if I targeted your question. If not, please do not hesitate to let me know, and I will rethink my reply based
on your response.
Thank you.
ATR

How can I get netflix streaming audio, the video is fine but the audio coming through is from the TV(dish)

how can I get netflix streaming audio, the video is fine but the audio coming through is from the TV(dish)

It's exactly as I stated. Whenever I try to drag these kinds of loops (ESX24 / software instrument loops? the ones marked in green with the white music note next to them) from the loop browser into the timeline a message comes up saying Audio Not Found for that loop. And a new track is created automatically when loops are dragged into the timeline, so I'm not creating some other random / synth instrument track so I'm not sure what the deal is... But perhaps I'll try creating a software instrument track first and then drag the loop into that track and see what happens - maybe there's something with the default settings that automatically creates audio tracks whenever loops are imported?

How can I divide one big long track into several smaller ones?

I have many mp3"s I imported or downloaded in my Library of lectures, sermons and speeches.
How can I divide one big long track into several smaller ones?
Any input would be great.

lakergrl wrote:
How do I split one very long track into several tracks (audio journal split into each day)
http://www.bulletsandbones.com/GB/GBFAQ.html#exportsections
(Let the page FULLY load. The link to your answer is at the top of your screen)

With Adobe Premier Elements 13 can I add my own audio tracks by pulling music from my files and by using my UBS microphone?

With Adobe Premier Elements 13 can I add my own audio tracks by pulling music from my files and by using my USB microphone?

larryh
Please remind us on what computer operating system your Premiere Elements 13 is running
Using your own music.....
Yes, with important but.....
Details
If your music is from iTunes, more than likely you will get some sort of error message from the program when you try to import the iTunes music into Premiere Elements (most versions including 13). In that case, please convert the iTunes music to the wav version in iTunes using the following iTunes instructions.
iTunes: How to convert a song to a different file format - Apple Support
If you are getting program error message using Premiere Elements 13 Add Media/Files and Folder with other than iTunes music, please give the source and properties of that music.
Using USB Microphone....Not recommended by Adobe....See Adobe ReMe
Details
As for Premiere Elements narration clips using the its Narration Tool
1. Adobe documentation indicates the USB microphone do not work in Premiere Elements and suggest the use of microphones that connect to the computer via computer jack.
But, there are some scattered cases where the user has found a USB microphone that has worked for him or her.
2. Be sure to check Edit Menu/Preferences/Audio Hardware ASIO settings to assure that Input and Output are enabled.
3. There have been reports (Premiere Elements several versions) where addition of narration using the Narration Tool results in loss of pre-existing
sound on numbered audio track clips and soundtrack.
ATR Premiere Elements Troubleshooting: PE12: Audio Losses After Narration Addition
4. In my particular Premiere Elements 13 on Windows 8.1 64 bit, I have found that I need to set the Mic Sensitivity all the way to the left to avoid
serious audio distortion.
I have tried to give you an overview to avoid surprises if you have not used the features that you pointed to in your thread question. Please let me know if you need further information.
Thank you.
ATR

How can i create a custom Audio Language name for video?

I have create a dvd with menu and vidoe (Audio 1 is sing a song , and Audio 2 is only music)
but i cant define" a audio name for andio that is mute,
my question is How can i create a custom Audio Language name for video?"
Anyone can help , thank you so much for reading !!

Thanks Stan Jones,
Anyone can tell me a soluation and some better show up method to present that the user is changing a audio track in correct name ...
Or Encore can do a pop-up message to show the user's selection or not ?_? (i don't know)

How can i stream video and audio from macbook air to my tv?

how can i stream video and audio from macbook air to my tv?

Wirelessly: you need an AirPlay - enabled device such as an AppleTV.
Wired: if your TV has an HDMI port, you need a Thunderbolt to HDMI adapter such as this one:
Mini DisplayPort to HDMI® Adapter w/ Audio Support
If your TV does not have an HDMI port you will need a converter that will convert HDMI input to whatever input your TV requires.

How can I code to play audio continuously from page to page in iBooks for reflow ePub

Hi,
I have tried and successfully completed the iBooks ambient soundtrack option in Fixed Layout ePub. It works fine.
But while trying the same in Reflow ePub, it is not working in iPad iBooks. I have latest iBooks version and latest iOS version in my iPad.
Please let me know how can I code to play audio continuously from page to page in iBooks for reflow ePub?
Thanks,
Sundaram

As soon as the user turns to the next page, the audio stops.
That's how it works in all cases.
the book is a read aloud book.
See the 'How-To Read Aloud' section in iBA Tips and Tricks 01

How can I extract only the audio as an aiff file?

Using a Sony DSC-N2 Cybershot Camera I recorded video that was saved as “MOV01606.MPG”. The video plays back with sound in Quicktime Pro and iTunes but how can I extract only the audio as an aiff file?

Use MPEG Streamclip (free) to convert your .mpg files to QuickTime formats.
QuickTime can't extract audio from muxed file formats.

How can I re-locate an audio track?

Similar Messages

Maybe you are looking for