How can I re-recognize a misconfigurated usb keyboard?

I got a new USB Keyboard for my Macbook pro for work. I connected and the sistem asked me to press the key next to the left shif key, instead of pressin the "<" key, I press the "z" key next to it (this is so embarrasing ).
I took the keyboard home and connected it to my personal Macbook pro where I press the correct key and there was no problem.
How can I fix this? How can I re-recognize the keyboard... I'm a front-end designer and no having the "<" key where it should be is really frustrating.
Thanks In Advanced...

Hi, Reescs.
Thank you for visiting Apple Support Communities.
You will need to order the print as a new purchase.
iPhoto for iOS (iPad): Order professional prints of your photos
http://support.apple.com/kb/PH14504
iPhoto for iOS: About auto-sized prints
http://support.apple.com/kb/HT6003
Cheers,
Jason H.

Similar Messages

How can I take music from an USB and transfer it to the iPod? It tells me use use itunes to sync but the music is on an USB drive. It had worked in the past. Tks

How can I transfer music from an USB drive to the iPod. I can see the music and play it on the computer, but the iPod tells me to use iTunes to sync. The music is not on iTunes. It has worked in the past.....tks

These are just playlists. The songs there are really not duplicates of the songs. They are just a different location for accessing them. Some playlists can be deleted, some cannot. Ones that are created by iTunes cannot be deleted. Ones that you create can be. The Recently Added and the 90's cannot.

How can I turn off charging via usb of my iphone 4s when I connect it to my computer?

how can I turn off charging via usb of my iphone 4s when I connect it to my computer?

You cannot.
Why would you want such a thing?

How can I re-install lion via usb drive on my new mba(mid-2011)?

how can I re-install lion via usb drive on my new mba(mid-2011)?
I just removed all data from main hd, and my network is not good enough to be able to download the os via recovery hd re-installing way.
in other words, is there a bootable [mac os x lion dmg] for my mba that I can download?

If you are looking for a download link for OS X Lion, I do not know of one. However if you really need the operating system you can buy a USB drive with OS X Lion on it, ready to boot. I think they're $69 at Apple's store. What I would do is contact AppleCare via the Express Lane or just call them and tell them your situation and then they will definantly have an answer for you to point you in the right direction.
Good luck!

How can I access and use the alphabetical keyboard of the phone ?

How can I access and use the alphabetical keyboard of the phone ? I cannot find the answer in the manual of use. Thanks for your help !

Recently I was abroad and tried to contact my voicemail to check my messages. I was asked to enter a password and did not know how to use the letters below the figures on the keyboard. I had to give up and wait until I was back in my country (no password is then needed).

How can i order macbook bro with arabic keyboard

how can i order macbook bro with arabic keyboard from apple store anybody can help me?

Nobody in these forums represents Apple or any store. In order to try to buy something, you must contact the stores directly yourself.
I have heard that retail stores may be able to place a special order for what you want.
http://www.apple.com/retail/

How can I tether my Blackberry over USB cable (to sync info)? [SOLVED]

Firstly, I have to thank all of you for making this such a great community and excellent guide to getting almost anything working on Linux - this is what makes Archlinux the best distro IMHO. I have hardly ever needed to post anything here because the answers are almost always either in the wiki or the forums.
Lately though, I received a Blackberry 8310 and wanted to tether it to use its data plan here in Ecuador. After following http://wiki.archlinux.org/index.php/Blu … GPRS_Howto using a small USB bluetooth adaptor, this has worked well and the connection stays up nicely, though very slow (to be expected). Blueman is a great program! Looking at improving my connection speeds (and reducing my latency), I am now trying to get the phone tethered via a USB cable to the phone, rather than over-the-air (Bluetooth).
The problem I am having is that I cannot establish which device exactly is the USB port connecting to? Before this phone, this worked fine on my Nokia E51 setting the modem to be /dev/ACM0. On Nokia, I would connect the phone, select PCSuite mode and 'sudo wvdial movistar' or my /etc/ppp/peers/movistar script would work fine. Blackberry however is a whole different kind of animal. I connect it with a standard USB cable, select 'no' to mass-storage-mode on the phone, and can see it in lsusb fine but the only device I seem to be able to use is /dev/tty2 but modem not initialising.
How can I be certain which device I am using? Will post some lsusb and dmesg.log out put when I get home to give you more info.
thanks for any guidance you can give me,
Last edited by minimal (2010-11-16 16:18:48)

Well, haven't got much further here unfortunately, though I have more logs and debug information now:
First, I connect the blackberry to the USB port and run 'lsusb':
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 0fca:0004 Research In Motion, Ltd.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
so I have my blackberry device listed by the looks of things..
I then run (for more info):
peter ~ $ lsusb -v -d 0fca:0004
Bus 002 Device 002: ID 0fca:0004 Research In Motion, Ltd.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 16
idVendor 0x0fca Research In Motion, Ltd.
idProduct 0x0004
bcdDevice 1.07
iManufacturer 1 Research In Motion
iProduct 5 RIM Composite Device
iSerial 3 8F606BB12465F80D8C6F4F3CA17D9CC896C5F475
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 97
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 8
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 1
bInterfaceProtocol 255
iInterface 2 BlackBerry
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x06 EP 6 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x08 EP 8 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 4 RIM Mass Storage Device
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x89 EP 9 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x0a EP 10 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)
/etc/wvdial.conf :
[Dialer defaults]
Modem = /dev/modem
Baud = 115200
Init1 = ATZ
Init2 = ATE0
;Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
[Dialer movistar]
Modem = /dev/tty2
Init3 = AT+cgdcont=1,"IP","wap.movistar.com.ec"
Phone = *99***1#
Stupid Mode = 1
Username = movistar
Password = movistar
..and the contents of the /etc/ppp/peers/movistar file:
show-password
noauth
#/dev/ttyACM1
# Peter: believe this is the Backberry 8310 device after running 'lsusb':
/dev/rfcomm0
debug
##115200
460800
connect /etc/ppp/peers/movistar-connect
disconnect /etc/ppp/peers/movistar-disconnect
defaultroute
#replacedefaultroute
noipdefault
# Peter: uncommented the following line to debug:
nodetach
usepeerdns
crtscts
local
ipcp-accept-local
#lcp-echo-interval 0
maxfail 10
lcp-echo-failure 0
lcp-echo-interval 0
#lcp-max-configure 0
#lcp-max-failure 10000
#lcp-max-terminate 0
#lcp-restart 30000
novj
nobsdcomp
novjccomp
nopcomp
noaccomp
linkname movistar
mtu 1500
mru 1500
user "movistar"
password "1234"
My /etc/ppp/peers/movistar-connect script :
#!/bin/sh
exec chat \
TIMEOUT 5 \
ECHO ON \
ABORT '\nBUSY\r' \
ABORT '\nERROR\r' \
ABORT '\nNO ANSWER\r' \
ABORT '\nNO CARRIER\r' \
ABORT '\nNO DIALTONE\r' \
ABORT '\nRINGING\r\n\r\nRINGING\r' \
'' \rAT \
TIMEOUT 12 \
SAY "Press CTRL-C to close the connection at any stage!" \
SAY "\ndefining PDP context...\n" \
OK ATH \
OK ATE1 \
OK 'AT+CGDCONT=1,"IP","wap.movistar.com.ec","",0,0' \
OK ATD*99# \
TIMEOUT 22 \
SAY "\nwaiting for connect...\n" \
CONNECT "" \
SAY "\nConnected." \
SAY "\nIf the following ppp negotiations fail,\n" \
SAY "try restarting the phone.\n"
my /var/log/dmesg.log :
Jul 29 21:11:11 el-duro kernel: ACPI: EC: GPE storm detected, transactions will use polling mode
Jul 29 21:11:13 el-duro logger: ACPI action undefined: BAT1
Jul 29 21:11:15 el-duro laptop-mode: Laptop mode
Jul 29 21:11:15 el-duro laptop-mode: disabled, not active
Jul 29 21:11:52 el-duro kernel: usb 3-1: new full speed USB device using uhci_hcd and address 2
Jul 29 21:11:52 el-duro kernel: Initializing USB Mass Storage driver...
Jul 29 21:11:52 el-duro kernel: scsi2 : usb-storage 3-1:1.1
Jul 29 21:11:52 el-duro kernel: usbcore: registered new interface driver usb-storage
Jul 29 21:11:52 el-duro kernel: USB Mass Storage support registered.
Jul 29 21:11:53 el-duro kernel: scsi 2:0:0:0: Direct-Access RIM Blackberry SD 0001 PQ: 0 ANSI: 4 CCS
Jul 29 21:11:53 el-duro kernel: sd 2:0:0:0: Attached scsi generic sg2 type 0
Jul 29 21:11:53 el-duro kernel: sd 2:0:0:0: [sdb] Attached SCSI removable disk
Jul 29 21:12:04 el-duro dnsmasq[2316]: reading /etc/resolv.conf
Jul 29 21:12:04 el-duro dnsmasq[2316]: using nameserver 208.67.222.222#53
Jul 29 21:12:04 el-duro dnsmasq[2316]: ignoring nameserver 127.0.0.1 - local interface
Here are my logs..
=============
/var/log/kernel.log :
Jul 29 21:11:11 el-duro kernel: ACPI: EC: GPE storm detected, transactions will use polling mode
Jul 29 21:11:52 el-duro kernel: usb 3-1: new full speed USB device using uhci_hcd and address 2
Jul 29 21:11:52 el-duro kernel: Initializing USB Mass Storage driver...
Jul 29 21:11:52 el-duro kernel: scsi2 : usb-storage 3-1:1.1
Jul 29 21:11:52 el-duro kernel: usbcore: registered new interface driver usb-storage
Jul 29 21:11:52 el-duro kernel: USB Mass Storage support registered.
Jul 29 21:11:53 el-duro kernel: scsi 2:0:0:0: Direct-Access RIM Blackberry SD 0001 PQ: 0 ANSI: 4 CCS
Jul 29 21:11:53 el-duro kernel: sd 2:0:0:0: Attached scsi generic sg2 type 0
Jul 29 21:11:53 el-duro kernel: sd 2:0:0:0: [sdb] Attached SCSI removable disk
/var/log/messages.log :
Jul 29 21:11:11 el-duro kernel: ACPI: EC: GPE storm detected, transactions will use polling mode
Jul 29 21:11:13 el-duro logger: ACPI action undefined: BAT1
Jul 29 21:11:15 el-duro laptop-mode: Laptop mode
Jul 29 21:11:15 el-duro laptop-mode: disabled, not active
Jul 29 21:11:52 el-duro kernel: usb 3-1: new full speed USB device using uhci_hcd and address 2
Jul 29 21:11:52 el-duro kernel: Initializing USB Mass Storage driver...
Jul 29 21:11:52 el-duro kernel: scsi2 : usb-storage 3-1:1.1
Jul 29 21:11:52 el-duro kernel: usbcore: registered new interface driver usb-storage
Jul 29 21:11:52 el-duro kernel: USB Mass Storage support registered.
Jul 29 21:11:53 el-duro kernel: scsi 2:0:0:0: Direct-Access RIM Blackberry SD 0001 PQ: 0 ANSI: 4 CCS
Jul 29 21:11:53 el-duro kernel: sd 2:0:0:0: Attached scsi generic sg2 type 0
Jul 29 21:11:53 el-duro kernel: sd 2:0:0:0: [sdb] Attached SCSI removable disk
Jul 29 21:12:04 el-duro dnsmasq[2316]: reading /etc/resolv.conf
Jul 29 21:12:04 el-duro dnsmasq[2316]: using nameserver 208.67.222.222#53
Jul 29 21:12:04 el-duro dnsmasq[2316]: ignoring nameserver 127.0.0.1 - local interface
/var/log/everything.log :
Jul 29 21:11:11 el-duro kernel: ACPI: EC: GPE storm detected, transactions will use polling mode
Jul 29 21:11:13 el-duro logger: ACPI action undefined: BAT1
Jul 29 21:11:15 el-duro laptop-mode: Laptop mode
Jul 29 21:11:15 el-duro laptop-mode: disabled, not active
Jul 29 21:11:52 el-duro kernel: usb 3-1: new full speed USB device using uhci_hcd and address 2
Jul 29 21:11:52 el-duro load-modules.sh: 'usb:v0FCAp0004d0107dc00dsc00dp00icFFisc01ipFF' is not a valid module or alias name
Jul 29 21:11:52 el-duro kernel: Initializing USB Mass Storage driver...
Jul 29 21:11:52 el-duro kernel: scsi2 : usb-storage 3-1:1.1
Jul 29 21:11:52 el-duro kernel: usbcore: registered new interface driver usb-storage
Jul 29 21:11:52 el-duro kernel: USB Mass Storage support registered.
Jul 29 21:11:53 el-duro kernel: scsi 2:0:0:0: Direct-Access RIM Blackberry SD 0001 PQ: 0 ANSI: 4 CCS
Jul 29 21:11:53 el-duro kernel: sd 2:0:0:0: Attached scsi generic sg2 type 0
Jul 29 21:11:53 el-duro kernel: sd 2:0:0:0: [sdb] Attached SCSI removable disk
Jul 29 21:12:04 el-duro dnsmasq[2316]: reading /etc/resolv.conf
Jul 29 21:12:04 el-duro dnsmasq[2316]: using nameserver 208.67.222.222#53
Jul 29 21:12:04 el-duro dnsmasq[2316]: ignoring nameserver 127.0.0.1 - local interface
Maybe the blackberry required 'usb_modeswitch' - though I could not work out how to use this command
Any ideas out there? Is there a simple way for me to probe USB devices in use? As far as I can tell it IS /dev/tty2 but I need to confirm this.
Many thanks,
Last edited by minimal (2010-07-30 14:55:19)

How can I create a non-EFI USB installation media

Hi fellows,
I usually create a non-EFI installation CD via this procedure
https://wiki.archlinux.org/index.php/Un … ical_Media
But now my optical drive is broken, so I need to create an USB non-EFI installation media.
How can I do ???

Hello nTia89,
I'm in a similar situation to yours. I have an ancient MacBook Pro (1,1) with a broken optical drive, and any attempts to get EFI boot working with Linux have resulted in no graphics.
My solution has been to first install Mac OS X via USB, then install Refind. After that, Refind will recognise Arch USB media during boot and you can install.
I'm only booting Linux, so my solution has been to use MBR on the hard drive. That forces the machine to use the BIOS compatability mode.
Don't hesitate to ask if you have any further questions!

How can I convert a l7680 from USB to wireless

I have a L7680 setup to print via a USB connection. How can I change that to a wireless connection without un/reinstalling the whole program.
Thx
Dave
WinXP SP3 IE8 MDE all updates
This question was solved.
View Solution.

Hi,
Your printer has a NIC (wired) therefore you can add it to your home network thru a router which has LAN port(s) using CAT5 or CAT5e or CAT6 cable. Please use this book as a guide how to connect:
http://h10032.www1.hp.com/ctg/Manual/c00389927.pdf
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How can my MacBook recognize its serial number again?

My MacBook (duo intel core) will not recognize its serail number.
I had the logic board exchanged last year because the old one broke down. I learned just recently that the serial number was not reinstalled again, because I want to use automatic DHCP to get an IP in our new local network. There the MacBook is registered with its serial number. But it can't get the IP-address since it doesn't recognize its serial number. Instead the system profiler will show (language is german):
Seriennummer: SystemSerialNumb
How can I reinstall the serial number?

Hi
You can't, unfortunately - this should have been done at Apple.
The network has no way to find out the serial number of attached computers, even if it did have one. More commonly, a machine's MAC address (ethernet or wireless ID) is used to identify it. You can find out this information through System Profiler.
Matt

How can I upload photos from my USB to my ipad

How can I transfer photos from my computer to my ipad?

There are several ways.
iOS and iPod: Syncing photos using iTunes
http://support.apple.com/kb/HT4236
Another way. You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive (works the same with an SD card) into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
Using The iPad Camera Connection Kit
http://support.apple.com/kb/HT4101
 Cheers, Tom

How Can i Charge 5130 XM with USB cable

Dear all
i want to ask that how can i Charge m 5130 XM with supplied USB cable is it posible ?
Knowledge sharing is better to earn
IF YOU FIND POSTS HELPFUL CLICK THE BIG ORANGE KUDOS BUTTON

You could use a CA-100 adapter. It has a USB type-A plug on one end and a 2mm charger port plug on the other. The downside is that you need 2 USB ports available if you want to transfer data and charge the phone at the same time: one for the CA-100 and one for the provided CA-101 data cable.
Alterntatively you could use a CA-126 charging/data cable, which is like a CA-100 and CA-101 in one cable. Type-A USB plug on one end and both a 2mm charging port connector and a microUSB plug on the other.
Message Edited by grschinon on 29-May-2009 10:02 AM
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

How can I install Windows 7 by USB? MacBook late 2008 10.6.8 Boot Camp 3.0.4

Someone please help...
I have tried software update and no luck. I think my Boot Camp on Mac 3.0.4 is not showing me the right option on creating a USB installation. It asks me to load Windows 7 CD when I don't have it, I bought it online... Every download I tried from Apple is .exe and I am losing hope on this one...

You can only install Windows from a USB with one of these Macs:
- MacBook Pro with Retina display.
- Mac mini (Mid 2010 and later).
- iMac (Late 2012).
- MacBook Air.
If you bought Windows in Internet and you got it in a ISO image, you can burn it into a DVD. Simply double-click the ISO image, open Disk Utility, right-click the ISO image in the sidebar and burn it

How can I change from useing an english keyboard to a French one

how can I change from english to french

Take your stylus and tap and hold on the analog clock and you will get a drop down list with two choices analog or digital. Choose digital.
Post relates to: Centro (Sprint)

How can I get rid of this white keyboard, it's extremely hard to use it?

I just got update a little bit ago and the keyboard went back to this crappy white which is extremely hard to use, it's like staring at snow all day and getting white out. The black keyboard before this one was perfect, easy to use. How can I get the black keyboard back or how can I go back to the previous version? This keyboard is useless the way it is.

The keyboard has been white since iOS 7 first came out. Now at least with 7.1, the letters are much better looking. And you can reduce the white a little. You can't get another keyboard and you can't go back to a previous version.
You can do the following in Settings > General > Accessibility Bold Text - Increase Contrast - Darken Colors - Reduce White Point
That should help you with the keyboard.

How can I re-recognize a misconfigurated usb keyboard?

Similar Messages

Maybe you are looking for