How can i read the number of lines written - in spreadshee​t array?
hello NI,
I am writing file as spreadsheet format continuously, contains date, time, chanel1, channel 2, channel 3..... etc.
i just want to know how many lines has been written after file write....
Regards,
Balaji DP
You count the number of line termination char. Se example
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)
Attachments:
sample.PNG 25 KB
Similar Messages
-
How can i know the number of lines in field-symbol internal table
how can i know the number of lines in field-symbol internal table
Hi,
If your field symbol has been defined as an internal table :
Use std describe as
Data: l type i.
describe <fs> lines l.
'l' will contain the number of lines as needed.
FYI
The size of this storage area in a field symbols depends on the number of table lines which is not fixed, but determined dynamically at runtime.
Regards,
Amit -
How can I reduce the number of lines in live paint?
I'm trying to use adobe illustrator to color the background of a photograph green while keeping the person in the picture the same color.
I used live trace to get a vector image and then attemped to use live pain to finish the job, but I end up with thousands of blue lines and gaps that are too small to color in. Is there anyway i can reduce the number of gaps so that i can actually paint the background?
I've already tried the gap options and adjusting the settings to small medium or large did nothing.
If this isn't possible, is there any other feature in adobe illustrator that would allow me to achieve my goal?
I have a photograph with a person in the middle; i want the person to remain the same and the background to be changed to green.
Thanks for your time.Would be easiest to fix this when tracing.
You could try the magic wand tool to select them (but you'll have to expand the live paint object) -
I need to produce a dopcument in New times Roman with a minimun of 12 ot font size, single spaced and , with no more than 6 lines of type per inch?
How can I check that I do not have more then 6 lines per inch?
thanks in adavance!!!If this is about Pages for iOs, you can certainly set TNR adn 12 pts, but no, there is no lines per inch settings.
If this is about Pages for OS X, you are in the wrong forum. -
How can I get the number of lines in a string?
I have a lone string with multiples lines (return). How can I find out how many lines in the string?
For the counting of no.of lines, try the Line Counter here http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=506500000008000000BB700000&USEARCHCONTEXT_CATEGORY_0=_49_%24_6_&USEARCHCONTEXT_CATEGORY_S=0&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0
As for extracting data without having worry over the description, you may wanna try using "Configuration File VI" in LabVIEW's File I/O function palletes.
Regards
ian.f
Ian F
Since LabVIEW 5.1... 7.1.1... 2009, 2010
依恩与LabVIEW
LVVILIB.blogspot.com -
How can i count the number of data patches in a numeric array
Hi All
BobLondn wrote:
Can I build a 2d array where I can store on one column the index of each data patch and on the second column to store the length of elements of relevant data patch.
Here's a quick example (LabVIEW 9.0) that stores the start index and length of all negative patches in a 2D array.
(modified from this old code)
LabVIEW Champion . Do more with less code and in less time .
Attachments:
FindNegativeSegments.JPG 30 KB
GetNegativeStretches.vi 16 KB
FindNegativeSegmentsFP.JPG 52 KB -
How do you find the number of lines in a file?
I need to count how many lines there are in a file, I am using a BufferedReader to read in the data, but how can I find the number of lines?
ThanksThat depends. How do you define a line? Is it a specific number of
characters, a String that's terminated by a newline character or some
combination thereof? -
How do I increase the number of lines presented in a drop down list?
When I am entering a single character/number for each of a random selection of three letters in a password verification, I get a drop down list from A to S only, the first 20. Accessing letter T to number 9 means scrolling down. How can I increase the number of lines in a drop down box to 36?
Hi canddski,
If you are taking about an interface on a website, this is up to the ui designer. But there is a reflow that depends on screensize for the Firefox UI.
You can use asp to control the list:
[http://forums.asp.net/t/1970301.aspx?How+can+i+display+selected+no+of+records+from+datatable+using+dropdown+list+without+database+]
but also try asking on stackoverflow.com -
How can I print the "number lines" with the code in Visual Studio?
How can I print the "number lines" with the code in Visual Studio?
Hi BillionaireMan,
What about your issue now?
If you have resolved it, you can share the solution here, which will be beneficial for other members with the same issue.
If you did not, please tell us more information,we will try my best to help you.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How can I limit the number of emails retained on my ipad air?
How can I limit the number of emails that are retained on my iPad Air? Because of legal requirements of a long-term project, I cannot permanently delete emails relating to that project from my ISP's mail server. My gmail account contains over 17,000 emails and, upon setting up my new iPad, and updating to ios 7.1.1, I now have all 17,000+ emails taking up space. I would like to limit the emails by count as I was able to do on my old iPad running ios 5.1.1 OR to retain them based on date range. I have not found any instructions on the support discussions or general iPad blogs that allow me to do that. Any way around this problem?
I also miss the 5.1.1 mail search feature that allowed me to narrow the search by from/to/subject/all. Does anyone know if that feature is available using some little-known ios 7.1.1 feature?
Thanks for your help.jlfcba wrote:
IOS 7.1.1 doesn't show a "days to sync" parameter anywhere in SETTINGS/Mail,Contacts,Calendars/ACCOUNTS/GMAIL Account/ GMAIL Acccount Info. There is nothing in iTunes relating to such an option either. So, it seems I'm back to square one.
If you have a decent mail provider like Microsoft Hotmail or Outlook.com mail it does.
If you have Gmail it does not. Quite right. Gmail is rubbish. -
I have limited space on my new ipad. How can I limit the number of songs from my itunes on my imac from going to my ipad when I connect the two?
you can do this by keeping the external hard drive connected and doing the following
-hold shift key down on computer while opening iTunes and a prompt will appear to choose a library
-select choose library, iTunes should bring up your explorer windows where you can search for the external HD
-after you find the external HD find the iTunes folder you just copied to it
-after opening the iTunes folder look for the file that says iTunes library.itl or if you can't see that extenstion just look for a document looking thing in the iTunes folder that shows up as a database file
-double click the database file and boom iTunes should load your library without having to copy it to the computer
PS: do make sure that if you are going to do it this way, make sure that the external HD is connected at all times, because if you don't then you will get exclamation marks next to your iTunes songs
double PS: if you are unsure how to find out if the iTunes library file is a database file just right click it and choose properties and under the type it should say database file
hope this helps:) -
Hi, how can I limit the number of emails I can see on my iPhone 5. Every time in delete one and older email gets added from my live.co.uk account (where I want to keep my 2500 emails) I just don't want many on my phone. Thanks
You can't. Why on earth would you attempt to manage 2500 emails with setting up a folder structure or some means of doing so? Simply keeping them in an single inbox is not realistic, no matter what email client you use.
-
How can I allow the application to line through a field that has been locked after being digitally signed?
We have multiple sections on a form with some fields being proposed information and other in another section having the approved information. once the approved information is entered we line through the proposed field so the data entry clerk won't pick up the wrong information. However we are receiving an error when attempting to enter data in the field which we have this edit. Error property: line through cannot be set because doing so would violate the document permission setting. any idea how we can get around this issue?You can control which fields are locked down after signing by setting up a collection. Then those that are not locked can be changed after signing. If this is not possible, then the line outs must occur prior to signing.
-
How can i display the Number instead of E
Hello Everyone ;
I am getting confused. How can i display the Number but the Exponential value is coming as E.
SQL> select sum(amount_sold) from sales;
SUM(AMOUNT_SOLD)
1.1287E+11
Table details ..
SQL> desc sales
Name Null? Type
AMOUNT_SOLD NUMBER
i want to change 1.1287E+11 to "numeric"
DB : 10.2.0.4
os : rhel 5.1Just a minor correction on an obvious math/responding too fast error: 1.1287E+11 is a 12 digit number. You move the decimal 11 positions to the right which would add 7 zeroes to the value.
MPOWEL01> l
1 select length(to_char(1.1287E+11)), to_char(1.1287E+11,'999,999,999,999'), 1.1287E+11 "TEST"
2* from sys.dual
MPOWEL01> col TEST format 999999999999
MPOWEL01> /
LENGTH(TO_CHAR(1.1287E+11)) TO_CHAR(1.1287E+ TEST
12 112,870,000,000 112870000000the problem was that the OP failed to alias the sum result to the formatted column rather than the lenght of the data.
HTH -- Mark D Powell -- -
Facetime is using my husband's cell phone number instead of mine. How can I change the number to mine in face time?
You need to set up the accounts in System Preferences/Accounts, then activate Fast User Switching.
That way you can quickly log in to your own account - then back to his.
You should obviously have different passwords.
Maybe you are looking for
-
My ipod touch will no longer download new apps after I updated via apple store.It freezes now when I attempt to download and blanks the app off entirely . How can I reverse the updates or correct the problem moving forward?
-
New HDD + can't boot from anywhere, just Hard Drive
HI I have a HP Pavilion dv6700 laptop with Windows Vista 32-Bit OS. I installed a new harddrive and ordered the original recovery dvds from the hp website for that model, but I can't get it to boot from anything but hdd, even if i change the booting
-
What is the music playing in the background at WWDC video "Thank you"?
What is the music playing in the background at WWDC video "Thank you"?, which starts with the blind man that used his iPhone to walk independently. (at the end of the video, you can hear the music without speech).
-
I have installed and uninstalled several times with no success. I had a previous version installed in April 10 but it will not reinstall or run. This problem started about a month ago, in early July.
-
How can I get my creative cloud membership onto my new computer?
I have logged into my adobe ID but I am only offered to download the free trials, not the programs I purchased? all programs have six months until expiration