How can i record 2 channels at the same time?

I want to record a mix using my decks. I would like to record the two channels from the two decks separately (so if I fluff a mix I can have another go at it).
How can I set this up? My mixer only has one channel output, so would I need a different mixer or is there a way I can rig it up with the Mac and GarageBand?
iMac24   Mac OS X (10.4.8)  

sorry if i wasn't clear. Yes it does have a stereo out put but my idea is to record the left deck as one track and the right deck as another. Then if I stuff a mix up I could pay back one track and record the second again.

Similar Messages

  • How far will the extreme reach and how many users can be on there at the same time?

    How far will the airport extreme reach and how many users can be on there at the same time?

    Last question first, since that is the easy one......approximately 50 (fifty) users for wireless depending on how active each user might be.
    The first question is much more difficult, as distance is not really the issue with wireless.....obstructions are the issue.
    A wireless signal can easily travel 300 feet or more with no obstructions in the signal path.
    But, a typical wall of sheetrock or wallboard in a home will absorb....on average....15-20% of the wireless signal. Brick or adobe will obviously absorb much more. A ceiling....because it is thicker....will absorb about 25-35% of the signal.
    So, if the wireless signal must pass through several walls and a ceiling, there won't be much, if any, of the signal left....even though the distance that the signal travels is not great...for example, 20-25 feet.
    Other wireless networks around you at the neighbors can also affect the relative strength of the wireless signal.
    The bottom line....locate the AirPort Extreme where wireless devices will receive a signal with the least amount of obstructions in the signal path. Your actual performance cannot be predicted in advance. You will not know how well the AirPort Extreme works for you until you try it out in your home.
    If you find that the signal does not reach as far as needed,  you will need to add additional "extenders", like an AirPort Express to provide more signal coverage.

  • How can I POST data within the same page if I have a A HREF -tag as input?

    How can I POST data within the same page if I have a <A HREF>-tag as input? I want the user to click on a line of text (from a database) and then some data should be posted.

    you can use like this or call javascript fuction and submit the form
    <form method=post action="/mypage">
    cnmsdesign.doc     
    </form>

  • How can i share photos on the same mac but different users?

    how can i share photos on the same mac but different users? we have different iphoto acounts and just want to be able to look under users in the finder and view another users iphoto.

    You may try moving ur librarie to the folder /Users/shared if and link it to iphoto from there
    You may locate and link libraries from arkiv-->change library in iphoto

  • I have a DAQ Assistant configured to read multiple channels at the same time. When I wire a graph indicator to the output, I see all of my signals jumbled together. How do I split them up into seperate signals?

    I have a DAQ Assistant configured to read 2 channels at the same
    time. When I wire a graph indicator to the output, I see the 2
    signals jumbled together. How do I split them up into seperate signals?
    When I wire any type of indicator it is showing just one output of a single channel.
    I want 2 indicators showing 2 different signals as expected from the 2 channels configured. How to do this?
    I have tried using split signal but it end up showing only 1 output from 1 signal in both the indicators.
    thanks in advance.
    Solved!
    Go to Solution.

    Yes you are right. I tried that but I did not get the result.
    I just found the way. When we launch split signal, we should expand it (split signal icon) from above and not from below. It took me a while to figure out this. 
    thanks 

  • I have an itunes account in Euro. I received iTunes and AppStore Gift Cards in $US. How can I use these on the same iWhatever?

    I have an itunes account in Euro. I received iTunes and AppStore Gift Cards in $US. How can I use these on the same iWhatever and keep together music/apps bought in the 2 currencies?
    Thx

    Barbara Hunt wrote:
    Would it be possible for me to download iTunes in Parallels and get the files into that and then onto my iPod?
    Yes, you can download iTunes for Windows using Parallels. If planning on making purchases here and/or authorizing already purchased tracks (from your Mac iTunes library), you are permitted to authorize five (5) computers as per iTunes Store terms of use, regardless of computing platform. No need to create a separate new iTunes Store account.
    However, judging from what you would like to do, your best bet would be to convert the WMAs to AAC/MP3 in iTunes-Windows (iTunes-Mac cannot import WMA files), and drag the files from the Parallels window to your desktop to add to the iTunes-Mac library. (as the iPod itself is currently linked to your iTunes-Mac library)
    Hope this helps,
    Steve

  • I have 2 accounts in my family and would like to purchase some of the same songs for both accounts, however when I try to purchase a duplicate song from the second account the song says play instead of purchase. How can I get some of the same songs?

    I have 2 accounts in my family and would like to purchase some of the same songs for both accounts, however when I try to purchase a duplicate song from the second account the song says play instead of purchase. How can I get some of the same songs?

    Drrhythm2 wrote:
    What's the best solution for this? I
    Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

  • HT5622 I own three Apple devices, but my iPad remained associated with my old email address and password. How can I register it with the same new email and password?

    I own three Apple devices, but my iPad remained associated with my old email address and password. How can I register it with the same new email and password?

    If you updated your existing account then try logging out of it on the iPad by tapping on the id in Settings > Store and then log back in and see if that 'refreshes' the account on the iPad. If you created a new account then any content that you purchased/downloaded via the old account will remain tied to that old account, and only that old account can download updates to its apps.

  • How can I merge folder with the same name so that the content does not replace the other

    How can I merge folder with the same name so that the content does not replace the other?

    >
    That's only a good idea if the semantics of sayHello
    as defined in MyInterface suggest that a
    RemoteException could occur. If not, then you're
    designing the interface to suit the way the
    implementing classes will be written, which smells.
    :-)But in practice you can't make a call which can be handled either remotely or locally without, at some point, dealing with the RemoteException.
    Therefore either RemoteException must be part of the interface or (an this is probably more satisfactory) you don't use the remote interface directly, but MyInterface is implemented by a wrapper class which deals with the exception.

  • I want to do banners ,how can we do  when click the same button (next button)  it must show differen

    i want to do banners ,how can we do  when click the same button (next button)  it must show different images . cam any one help

    Check out my blog with samples on Edgehero.
    http://www.edgehero.com/articles/interactivity

  • Iphone 6 airdrop problem can't find or connect to my iPhone 5s to share pic, how i can fix this ? at the same time my iPhone 5s no problem with airdrop to share.

    Iphone 6 airdrop probleme can't find or connect to my iPhone 5s to share pic, how i can fix this ? at the same time my iPhone 5s no problem with airdrop to share.

    hi raz, i don't have problem how to use airdrop , but the iPhone  6 can not find other contact so i can share pic , and i have iOS 8.0.2 on both iphone.and i have the same network .
    with iPhone 5s i can share with airdrop and he find my iPhone 6 name so i share and accept pic, but from iPhone 6 i can't do the same.

  • How to support multiple users at the same time?

    Hi all,
    I have a Labview software which controls a analyzer via GPIB connector. When user A is using the software, user B has to wait until A is done. But actually, the analyzer is not very busy, when user A is using the software.
    I want user A, B, C and D can use the software at the same time. just like we can open Multiple websites at the same time.
    How can I program the software, so that the software can be open multiple times? Do you have any example?
    Thanks a lot.
    Steven
    Solved!
    Go to Solution.

    Are all the users going to be measuring the exact same thing from the same instrument?
    It would be possible to write a separate instrument server application that would handle all the direct interactions with the instrument. When one of the users needed to access the instrument, they would gain access to it through this server.
    The big, Big, BIG caveat is that each interaction with the instrument would need to be atomic. In other words each access would need to configure the instrument, initiate the reading, report the results, and then reset the instrument back to some known default value.
    As Dennis said, not a trivial process, but probably do-able...
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • Microphone and what U hear can not be use at the same time at the same time

    I am using Creative SB X-fi Xtreme Gamer (Creative Model Number: SB073A), sound card and have down loaded the latest drivers (version 2.18.15). What U hear is enabled, which in turned makes the microphone unavailable. If you reverse the settings, then what U hear is unavailable.
    It appears that; microphone and "What U Hear" can't be enabled at the same time. If someone has an answer on how to correct the following settings to achieve; using the microphone and what U hear at the same time would be appreciated.
    My OS is WIN 7x32

    It was possible in Windows XP but due to windows 7 own audio mixer this does not work anymore.

  • Hi,  If I have 1 license for creative cloud, will it possible to install in 2 computers (1 laptop and 1 desktop)?  When I am in the office I can use desktop and at home I can use laptop? At the same time I will be using only one devise. Will that be possi

    Hi,  If I have 1 license for creative cloud, will it possible to install in 2 computers (1 laptop and 1 desktop)?  When I am in the office I can use desktop and at home I can use laptop? At the same time I will be using only one devise. Will that be possible?  Thanks

    Yes. Yes. Yes.
    Mylenium

  • Re: if weblogic can serve two ports at the same time?

    That's not true. WebLogic supports a non-secure and secure listener port at the
    same time. That was one of the selling points for my organization.
    Michael Girdley wrote:
    If, you mean the same port on two different IP addresses, then the answer is
    yes.
    If, you mean two different ports on the same IP address, then the answer is
    no.
    Thanks,
    Michael
    Michael Girdley
    Product Manager, WebLogic Server & Express
    BEA Systems Inc
    fxy <[email protected]> wrote in message
    news:8fdk99$t9$[email protected]..
    <URGENT QUESTION>
    I'd like to know if weblogic can support two ports at the same time.
    thank you in advance.
    <URGENT QUESTION>

    Well, the question was really meant to see if any change was made to WL to support
    this, not because I didn't believe Michael Girdley.
    P.S., this is something Websphere 4.0 let's you do...In case this encourages someone
    to add this support.
    "Mike Reiche" <[email protected]> wrote:
    >
    If you don't believe Michael Girdley, then I don't know why you would
    believe anyone
    else. I believe the answer is still 'no'.
    Why do they 'have to be on different ports'? We block requests by URI
    - so just
    block all requests to /youradminapp/* at the firewall. Or you can block
    them at
    your Web Server. Or restrict them by user in WL.
    Mike
    you"Anil Arora" <[email protected]> wrote:
    Is it still true that WL 6.0 cannot host multiple (non-secure) HTTPports
    on one
    server? We need this capability within one JVM to allow one web application
    to
    be accessed from one port while another through a second port. Forexample,
    we
    have a application to be exposed through the firewall at port 7001.
    Then we have
    another admin application to only be accessed within the firewall. But
    they need
    to be deployed within the same JVM since they may have shared statebetween
    them.
    Thanks,
    Anil
    "Michael Girdley" <[email protected]> wrote:
    I'm sorry, to clarify my statement: I was speaking about nonsecure
    communications. Weblogic can only support one listener port at a time.
    Thanks,
    Michael
    Michael Girdley
    Product Manager, WebLogic Server & Express
    BEA Systems Inc
    Allen Akers <[email protected]> wrote in message
    news:[email protected]...
    That's not true. WebLogic supports a non-secure and secure listenerport
    at the
    same time. That was one of the selling points for my organization.
    Michael Girdley wrote:
    If, you mean the same port on two different IP addresses, then
    the
    answer is
    yes.
    If, you mean two different ports on the same IP address, then theanswer
    is
    no.
    Thanks,
    Michael
    Michael Girdley
    Product Manager, WebLogic Server & Express
    BEA Systems Inc
    fxy <[email protected]> wrote in message
    news:[email protected]...
    <URGENT QUESTION>
    I'd like to know if weblogic can support two ports at the same
    time.
    thank you in advance.
    <URGENT QUESTION>

  • Will Verizon Stop encrypting sim cards for iPhones so users can talk and surf at the same time?

    Will Verizon stop encrypting iPhone sim cards so users can surf and talk simultaneously?

    I can prove that this is not the case. I travel abroad monthly and have sim cards for these 2 countries i frequent and i can surf and talk at the same time. The claim that it needs another antenna does not support my findings. Can we be more transparent please. As a costumer i find it highly inconvenient to have to hang up a call with someone just to access an email.
    >> Personal information removed to comply with the Verizon Wireless Terms of Service <<
    Edited by:  Verizon Moderator

Maybe you are looking for

  • Windows 8 search not working for on particular folder on external HDD

    I have an external HDD which has a library of pdf documents on it (about 11gigs worth) - it's in my index and it used to be perfectly searchable by windows search until I had the files system converted to NTFS from FAT32.  Now it literally will not f

  • Problem in Installing Oracle Enterprise Edition 8.1.6 (Rel 2)

    I am trying to install Oracle8i, in Windows NT with Service Pack 4. After installing product file, In Database configuration assistant, the progress bar is not at all moving. Even I have waited for 4 hours. My system conf. is P200, 128mb RAM with 4 G

  • Raise Application Error on Dynamic Action

    Hi I am using Apex 4.2. On a click of button a Dynamic Action is written, which calls a DB Package. The DB package has exception handlers and also the package has two output parameters Error Code and Error Msg So in my code(Dynamic Code) i make a cal

  • Spry Image Slideshow with Filmstrip controls showing ABOVE images?

    Hi all, I've never used these forums before and apologise in advance for my first discussion being a request for help! I recently added the Spry Image Slideshow with Filmstrip to a page and am not sure which property I need to modify to get the contr

  • PSE 8 backup fails at 70% "error in writing files"

    This problem has existed since I purchased a replacement laptop and reinstalled PSE 8 I have a little less than 8,000 photos and I back up to an External HD I have read the earlier extensive discussion on this topic which seemed inconclusive as to wh