How can I record 2 tracks simultaneously in GarageBand for iOS?

I am trying to record 2 tracks at the same time, one, a line in for my guitar and the other a vocal mic. I am using an Alesis i/o Dock with my iPad Air 2, everything is updated, and everything is plugged in correctly. When I select either track from the multitrack screen, I can see that both work appropriately. However, when I hit the record button, the screen goes from the multitrack view to the track that is 'highlighted' and the record process goes from there. So if the 'amp' (guitar) track is highlighted, the app take me from the view with both on it to the 'guitar amp' selection, showing the head that I selected. Now, in the past, I have recorded 2 tracks at the same time. I still have the original recording showing both tracks and their settings. Even when I try to match the setting (both were on Left Channel, for example) it doesn't work. On my recent attempt to record (the one this question is about) I put the mic track on Right Channel and the line in on Left Channel, and vice versa. I tried putting them both on the same thinking that maybe that's what I did before because the app might not be able to do both Channels at the same time. I tried using the Mic track in stereo and the Line In on Left and tried it on Right; nothing. Has GarageBand taken this feature out on iOS? I do see if I had a Mac there is an 'Enable Multirack Recording' box to check, but I don't see anything like that for iOS... Can anyone help??

in one the YouTube Tutorials, it is not possible in iOS. but hopefully in the later version it should be.

Similar Messages

  • How do I record internal audio to garageband for ipad2? I want to record from a drum machine app to garageband.

    How do I record internal audio to garageband for ipad2? I want to record from a drum machine app to garageband.

    I dont believe you can do that directly. You would need to record the audio separately and then import

  • How can I record in mono useing L for ch1 R ch for 2 and so on

    and have playback uniformed up 40 tracks.?

    Assuming that you are asking about recording in Multitrack view. In the track you just have to click on the input selection box (right pointing arrow) in the track header and select your required mono input there. Ususally the Inputs from your audio interfaced are number, for instance, (01S), (02S) etc for the stereo inputs and (01M), (02M) etc. for the mono halves of stereo inputs.

  • How can I record reading and spelling ages for my pupils?

    Hello!
    I am trying to do quite a simple task in numbers but it is proving very difficult.  I am a special needs teacher who is new to IWorks and I wan to record my students' spelling and reading results as ages in years and months e.g. 8 yrs 11 months.  I cannot find a format to do this.  Once I am able to do this, I then want to be able to subtract their readng age from the previous year from their current reading age to see how much progress they have made in months.  I have found the duration formatting that allows you to record things in weeks and days, but nothing to record data in years and months.  If anyone is able to help, I'd greatly appreciate it.
    Thanks
    Tara

    The brute force approach would be to explicitly list the Yr and Mo in separate columns. The improvement calculation would be done on the Yr and Mo columns using an if statement to handle the arithmetic for the 1 year = 12 months complication.  The following figure shows an example showing the equations for F2 and G2.
    You could also do the improvement calculation by converting everything to months... but then you would have to separate the answer back into Yrs and Mos using the INT and MOD functions.
    One thing... I have not checked the equations to see if they work correctly for a student who has regressed to a lower reading level.

  • How can I record multiple tracks simultaneously?

    How can I record multiple tracks simultaneously?  Or rather what hardware do I need to do this?  I currently run guitars and mic into a PA and then the PA into Garageband.  But this is just one track.  I want to record the guitar as one track while simultaneously recording vocals as another track.  What hardware do you suggest - keeping it affordable?

    if you want to use your two chanel PA, pan 1 channel to the left, and the other to the right, and set one GB track to Mono 1 and the other to mono 2.
    if you want better quality, any two channel interface will work:
    http://www.bulletsandbones.com/GB/Interfaces.html

  • How can i record a song in a karaoke music track via GB?

    how can i record a song in a karaoke music track via GB?

    First plug in some headphones.
    Then drop the karaoke song into garageband. You do this by just draging and dropping the song file into garageband or if the song is in itunes just use garagebands media browser.
    Now create another track (vocal track).
    Put headphones on hit record and sing.
    This is a bit over simplifed but give it a try someone will be here when you have more specific problems.

  • How can I record with GarageBand 1.3 in the background using other app?

    How can I record with GarageBand 1.3 in the background using other app?
    I use iPad 2 with iOS 6 and GarageBand v1.3.
    I'd like to play an other app like Sunrizer synth while the GarageBand is recording in the background in a track.
    By now I can do it only using the build-in mic of iPad, but this is not the point.
    Can I record other apps in a GarageBand track?
    Thanks a lot for your time.

    I suspect you are probably correct about the reasoning, although there are already a myriad of ways to do that.
    Don't get me wrong - I never said I like this. But it is consistent with other Apple applications, that are similar restrictive; you cannot take a screenshot, when dvd-player is running for example.
    That are the moments, when I am glad that MacOS X is a unix system under the hood

  • How can I record an Audio Instrument (saxophone) and listen to a reference track at the same time?

    How can I record an Audio Instrument, and listen to a reference track at the same time?

    Are you using an external audio controller or the line-in and headphone jacks on the side of your computer? You shouldn't have an issue using headphones when you're recording through the line-in but you may want to make sure you have monitoring on and it's going to the right place.
    If you're using an external audio controller, try making an aggregate device combining the controller and the "built-in output" into the same device. Go to Applications/Utilities/Audio MIDI Setup, click the "+" sign at the bottom left to make a new device and check the "use" boxes to the left of the physical devices you want to use as part of that aggregate device. That is how I use the computer's speakers or headphones to monitor my input as opposed to only being able to use the output on my audio controller.
    Now that I see some of the questions on the side of this page I realize that the 13" MBPs seem to have only one combined input/output jack... That is an incredibly stupid feature. What on Earth could possibly justify that design decision? I suppose if that's the problem you're having you'll have to buy some sort of splitter (if they even make them) or get an external audio controller like an Apogee Duet or something along those lines. I would be furious if they combined those two jacks on all of the MBPs.

  • HT2508 How can I record my voice through my Mac?

    How can I record my voice to my Mac?

    Use GarageBand.
    In GarageBand, go to the Track menu and add a New Track to your project. When the box comes up, click "real instrument", then "create". Unless you have external audio hardware connected, the default audio input for the track should be the internal microphone of the computer.
    Or use QuickTime. Open QuickTime, go to File>New Audio Recording.

  • How can I delete empty time in GarageBand?

    How can I delete empty time in GarageBand?

    Thanks,
    I found no Arrange Track command so far, but in my Norwegian version of Garage Band there is something like "Sow/Hide Arrangement track" and it seems I can use this command for the same purpose. It makes it possible for me to mark a section of the time line (with all tracks) and then delete it.

  • How can I record a guitar and my voice (only voice with mic) at the same time ?, how can I record a guitar and my voice (only voice with mic) at the same time ?

    how can I record a guitar and my voice (only voice with mic) at the same time ? I have one interface with Input 1 mic, Input 2 guitar, everything is working correct, but how can I activate multi recording or something like that... thanks

    Set your inputs on your channel strips and make sure you have one set to input 1 and the other input 2.  Arm the 2 audio tracks(the "R" in the track header. They will turn red and flash), then hit the record button. 

  • How can I record an audio sound and convert it to a ringtone?

    How can I record an audio sound and convert it to a ringtone?

    Record your voice using iPhone (for ringtone only 35 secs or under are valid), sync iPhone with iTunes.
    In iTunes the recorded voice is listed under Music as some_numbers.m4a.
    Right click on the item and choose Create AAC version.
    Drag the converted voice onto the desktop.
    Delete the voice copy in iTunes. (important step)
    On desktop, rename the some_number.m4a to something_more_intelligent.m4r
    Drag it back to iTunes and you will find it under Tones.
    Now select it (for sync) and connect your iPhone, do a sync.
    If everything works out, it will be in Settings > Sounds > Ringtone.
    Now choose a contact you want to assign this ringtone, tap Edit and add the ringtone.
    Hope this helps.

  • How can I record an audio file directly from a digital recording device directly to the iMac?

    How can I record audio directly to my iMac from a digital recoding device?

    What digital recording device?

  • How can I get Tracker to find a shared review PDF initiated in another domain?

    I initiated a shared review for a PDF and stored it on a network server in domain X. Subseqauently, the server was moved into a different domain, call it Y.
    Now, Acrobat Tracker can't find the PDF ... and reviewers can no longer  access the PDF.
    How can I get Tracker to find the PDF in the new domain Y?

    No, this is not possible. You need to initiate the review again. This is because the review server information is embedded inside the PDF and when you change the review server, the JavaScript embedded in PDF still refers to the old server. So Tracker is unable to locate the review PDF.
    If the old review has comments by other reviewers, you can save it as an archive and initiate review on new server on this new PDF. This way all the review comments can be retained in the PDF but they will be published "on behalf of" the initiator now.
    Hope that helps.

  • How can I record a video with LAbview?

    Hi,
    I have a question: How can I record a video with labview?
    I have a camera (AXIS 221) connected via rj45 on PC. I see the video of the camera in a browser.
    And I would to acquire the video in labview.
    Could someone help me?
    Thanks
    Raf

    Unfortunately I haven't any experience with this camera. Iguess, you should install API, then crete new VI, place ActiveX container (palette Container->ActiveX) on the Front Panel, then right mouse click, then choose Insert ActiveX object..., then found you camera object and select it and press OK. Then you probably can see image from the on the front panel. Also probably you will be able to get image data in array (how easy is it - depends from the camera API).
    If you able to see image from camera in the Internet Explorer, then another method - you can put Microsoft Web Browser as ActiveX object, then you should also see the image. Disadvantage of this method - you will be not able to get image data.
    Andrey.

Maybe you are looking for

  • Is there a way to run a power pc based application in Lion?

    MyAkai  sampler's USB editor software, 'AkaiSys' won't run since i upgraded my macbook pro to OSX Lion. An alert says that powerpc apps are no longer supported. Can i get around this without reverting back to Snow Leopard?

  • ACS will not save the config changes to reports

    I have configured a very old ACS appliance, 4.1.  At this time this is what I we have to use.   The authentication is working fine, the reports for accounting, TACACS+ accounting is only saving the login and logout of the users and not any config cha

  • Zen Micro/ Vista / Organi

    I have downloaded the organiser for Vista, however I cannot see the songs in the Playing Lists, I can add songs in them but I cannot see them in order to arrange the songs. I was able to do that previously with the Media Explorer. Any clues?

  • G5 won't boot into Leopard

    Hello everyone, I've got a weird issue with my PowerMac G5 and Leopard. My 11 year old was experimenting with the GUI, and it's possible that he ended up interfering with the online OS update, or something along these lines (I wasn't there to see wha

  • Checking register, categories, subcategories

    I am trying to use the Check Register to keep up with our monthly finances. I want to use categories and subcategories to keep track of expense accounts. How do I get the "category" on the Account Categories to read the "category" on the Transactions