How can I record a microphone and software instrument at the same time in Garageband 10.0.1? It seems I can record one or the other, but not both at the same time?
I am trying to record a vocal mic and a keyboard (using a software instrument) at the same time using Garageband 10.0.1. It seems that I can't record the mic input and the software instrument at the same time. I can record the mic input by itself, and I can record the software instrument by itself (if I don't have a mic input track created), but I can't record them together.
It seems like this should be an obvious thing to be able to do, but I can't figure out how to make it work.
Can someone help?
Thanks,
Kurt
Kurt1997 wrote:
I am trying to record a vocal mic and a keyboard (using a software instrument) at the same time using Garageband 10.0.1.
you need to "record enable" both tracks:
http://www.bulletsandbones.com/GB/GBFAQ.html#multitrackrecordinggbv10
This FAQ entry offers a Minute GarageBand video tutorial
(Let the page FULLY load. The link to your answer is at the top of your screen)
Similar Messages
-
how do I set up my Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time. I can use one or the other, but not both. From systems Preferences I must select one or the other. I want both to work all the time.
Hi,
I would recommend you to use 0FI_AP_4 rather using both, particularly for many reasons -
1. DS: 0FI_AP_4 replaces DataSource 0FI_AP_3 and still uses the same extraction structure. For more details refer to the OSS note 410797.
2. You can run the 0FI_AP_4 independent of any other FI datasources like 0FI_AR_4 and 0FI_GL_4 or even 0FI_GL_14. For more details refer to the OSS note: 551044.
3. Map the 0FI_AP_4 to DSO: 0FIAP_O03 (or create a Z one as per your requirement).
4. Load the same to a InfoCube (0FIAP_C03).
Hope this helps.
Thanks.
Nazeer -
I want to keep the pages above the section break as portrait, and the ones below I want to change into landscape. Is this possible? I can only get it to be one or the other but not both.
The work around is to do two documents, one in portrait format and one in landscape format. When finished export to Pdf. open in Preview by select both files and use Cmd + O or doubleclick. You can now in Previews thumbnail column the pages from one document into the other and then save.
If you have created only one with i.e. all pages in portrait format but with the content for the landscape pages rotated on the pages, you can rotate the pages in Preview. Two ways to get the same result. -
How do I create both endnotes and footnotes in same doc in Pages? I have iWork 2008. I understand how to create one or the other, but not both.
You have to select one or the other.
Try making two documents and see if you can merge the .pdfs, but their will be problems with page flow, making the pages shift. Can't see it working really.
Pages is not the only solution out there or the best for most jobs (let alone the safest). Try Word for Mac, LibreOffice (free) or any App that has the features you need.
Peter -
Can you check for data in one table or another but not both in one query?
I have a situation where I need to link two tables together but the data may be in another (archive) table or different records are in both but I want the latest record from either table:
ACCOUNT
AccountID Name
123 John Doe
124 Jane Donaldson
125 Harold Douglas
MARKETER_ACCOUNT
Key AccountID Marketer StartDate EndDate
1001 123 10526 8/3/2008 9/27/2009
1017 123 10987 9/28/2009 12/31/4712 (high date ~ which means currently with this marketer)
1023 124 10541 12/03/2010 12/31/4712
ARCHIVE
Key AccountID Marketer StartDate EndDate
1015 124 10526 8/3/2008 12/02/2010
1033 125 10987 01/01/2011 01/31/2012
So my query needs to return the following:
123 John Doe 10526 8/3/2008 9/27/2009
124 Jane Donaldson 10541 12/03/2010 12/31/4712 (this is the later of the two records for this account between archive and marketer_account tables)
125 Harold Douglas 10987 01/01/2011 01/31/2012 (he is only in archive, so get this record)
I'm unsure how to proceed in one query. Note that I am reading in possibly multiple accounts at a time and returning a collection back to .net
open CURSOR_ACCT
select AccountID
from
ACCOUNT A,
MARKETER_ACCOUNT M,
ARCHIVE R
where A.AccountID = nvl((select max(M.EndDate) from Marketer_account M2
where M2.AccountID = A.AccountID),
(select max(R.EndDate) from Archive R2
where R2.AccountID = A.AccountID)
and upper(A.Name) like parameter || '%'
<can you do a NVL like this? probably not... I want to be able to get the MAX record for that account off the MarketerACcount table OR the max record for that account off the Archive table, but not both>
(parameter could be "DO", so I return all names starting with DO...)if I understand your description I would assume that for John Dow we would expect the second row from marketer_account ("high date ~ which means currently with this marketer"). Here is a solution with analytic functions:
drop table account;
drop table marketer_account;
drop table marketer_account_archive;
create table account (
id number
, name varchar2(20)
insert into account values (123, 'John Doe');
insert into account values (124, 'Jane Donaldson');
insert into account values (125, 'Harold Douglas');
create table marketer_account (
key number
, AccountId number
, MktKey number
, FromDt date
, ToDate date
insert into marketer_account values (1001, 123, 10526, to_date('03.08.2008', 'dd.mm.yyyy'), to_date('27.09.2009', 'dd.mm.yyyy'));
insert into marketer_account values (1017, 123, 10987, to_date('28.09.2009', 'dd.mm.yyyy'), to_date('31.12.4712', 'dd.mm.yyyy'));
insert into marketer_account values (1023, 124, 10541, to_date('03.12.2010', 'dd.mm.yyyy'), to_date('31.12.4712', 'dd.mm.yyyy'));
create table marketer_account_archive (
key number
, AccountId number
, MktKey number
, FromDt date
, ToDate date
insert into marketer_account_archive values (1015, 124, 10526, to_date('03.08.2008', 'dd.mm.yyyy'), to_date('02.12.2010', 'dd.mm.yyyy'));
insert into marketer_account_archive values (1033, 125, 10987, to_date('01.01.2011', 'dd.mm.yyyy'), to_date('31.01.2012', 'dd.mm.yyyy'));
select key, AccountId, MktKey, FromDt, ToDate
, max(FromDt) over(partition by AccountId) max_FromDt
from marketer_account
union all
select key, AccountId, MktKey, FromDt, ToDate
, max(FromDt) over(partition by AccountId) max_FromDt
from marketer_account_archive;
with
basedata as (
select key, AccountId, MktKey, FromDt, ToDate
from marketer_account
union all
select key, AccountId, MktKey, FromDt, ToDate
from marketer_account_archive
basedata_with_max_intervals as (
select key, AccountId, MktKey, FromDt, ToDate
, row_number() over(partition by AccountId order by FromDt desc) FromDt_Rank
from basedata
filtered_basedata as (
select key, AccountId, MktKey, FromDt, ToDate from basedata_with_max_intervals where FromDt_Rank = 1
select a.id
, a.name
, b.MktKey
, b.FromDt
, b.ToDate
from account a
join filtered_basedata b
on (a.id = b.AccountId)
ID NAME MKTKEY FROMDT TODATE
123 John Doe 10987 28.09.2009 31.12.4712
124 Jane Donaldson 10541 03.12.2010 31.12.4712
125 Harold Douglas 10987 01.01.2011 31.01.2012
If your tables are big it could be necessary to do the filtering (according to your condition) in an early step (the first CTE).
Regards
Martin -
Live Recording with mics and Software Instruments
Has anyone used the Software Instruments in GB to play live, while recording the Software Instruments direct and live (Real Instruments) as well?
I'm thinking about getting a FirePod or similar, to record my band live using several mics and playing and recording Software Instruments all at once. I'm concerned that this set up might have too much latency and make the Software Instruments not playable with my band live, and perhaps all this might make my iMac G5 bog down.
Anyone have any experiences with any or all of this kind of use of GarageBand with an audio/MIDI interface?
iMac G5 20" Mac OS X (10.4.6)Hey Hang,
Sorry if I'm talking in circles. That post was early!
I'd like to be able to use the built-in Software Instruments live and record that MIDI as well as the live tracks at the same time. However, I could deal with using my own keyboards for the live sounds and just record the MIDI from them while recording the live tracks too, if that makes the system work. For instance, if the part I wanted was a piano, and the Software Instrument piano used too much processor power, I could "record" with a smaller instrument that wasn't such a hog. Then, in mixing, I'd use the Software Instrument I wanted for the keyboard part. Live, my real keyboard could provide the piano for all to hear.
Am I making sense yet?
I suppose one thing I could do is something I was thinking of doing already. I could get one of the $40 MIDI-to-USB interfaces to record with the band. Right now, I'm just using a stereo mic set up to record stereo into GB. I could add MIDI and see what happens. Heck, I could enable 6 more real instrument tracks at the same time and see what happens! Then I would know it was possible on the iMac at least. -
My Mac mini server has suddenly stopped seeing one or the other bluetooth devices, either the wireless keyboard or the mouse( both apple products) have tried new batteries, at first it was the mouse that stopped responding, but upon rebooting the computer now the keyboard will not respond and the mouse works. Both work fine on an older Mac mini that I hooked back up to check.
There is absolutely no reason why they should not bothe be able to connect to your WiFi network. The easiest place to start would be to reboot your router. Unplug it for about 30 seconds and then plug it back in again. I would also restart both the iPad and the iPhone.
-
I live in Colombia, my apple ID and iTunes account are set in Colombia, but each time I try to register my Colombian credit card it tells me my credit card is not valid for the store. How can I fix this?
credit card it tells me my credit card is not valid for the store.
Hi Don ...
"Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
From here > The Complete Guide to Using the iTunes Store | iLounge Article
The iTunes and Mac App Store are one in the same.
And check out this support article here > iTunes Store: My credit card's security code or zip code does not match my bank's records -
how can i add videos,movies and tv shows episodes to my ipod nano?I want to know whether i can directly add them through my pc or not without downloading them from i tunes store?
Yes, you can add your own videos to iTunes, then sync them to your nano, subject to supported max resolution limit and file type. The specs for the 7th gen nano says (I don't know which nano model you have), Video Format Support
"H.264 video: 720 by 576 pixels, 30 frames per second; Baseline, Main, and High-Profile level 3.0 with AAC-LC audio up to 256 Kbps; 48kHz; stereo audio in .m4v, .mp4, and .mov file formats
MPEG-4 video: up to 2.5 Mbps, 720 by 576 pixels, 30 frames per second; Simple Profile with AAC-LC audio up to 256 Kbps; 48kHz; stereo audio in .m4v, .mp4, and .mov file formats"
http://www.apple.com/ipod-nano/specs.html
(earlier nanos have lower max resolution limits)
So, "HD" video is too high resolution, so iTunes will not sync such videos to the iPod (although they play in iTunes). If you are asking how to set up iTunes to sync videos in general (regardless of source), please post back. -
In the control center I can change the mute or the rotation but not both. In the settings area therefore I can't uncheck the mute and rotation settings at the same time.
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
Cheers, Tom -
How can I work with my adobe Lightroom Version 5 which was added to my Samsung NX3000. If I want to load an .SRW File it is not possible, only the .JPG File. How and from where can I the Module and how is it to install ?
You need Lightroom 5.5 or later (the most current version is 5.7.1). This is a free update if you have already purchased an earlier version of Lightroom 5.
Product updates -
I want to change my primary e-mail address that I use with Apple ID - help guide says Select Edit next to “Apple ID and Primary Email Address.” But there is no 'edit' on that section there is on every other but not that one. Can anyone help?
You can create an alias @icloud.com email address within your current account that will receive email in your current iCloud inbox (see http://help.apple.com/icloud/#/mm6b1a490a). (@me.com addresses are no longer available as new addresses.) Just be aware that you cannot use an alias address later to create a new iCloud account or move it to a different account.
Also, even if you created a new iCloud account with a new ID, your existing purchases would not be lost. They are permanently tied to the original ID you used to purchase them. You can also continue to use the existing ID for the iTunes store; it does not need to be the same as the ID you use for iCloud. -
I am the administrator of my MacBook Pro, which I share with my kids. One of them forgot his password, so as the admin I changed it for his account, but when I try to see his account, it says I need to provide the keychain password. How can i get it? I have no idea how to sort this out...
First, make sure caps lock is not on.
You must back up all data before continuing, unless you've already done so. If you need to back up but can't log in, ask for instructions.
If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise*, boot into Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
*Note: If you've activated FileVault, this procedure doesn't apply. Follow instead the instructions on this page:
If you forget the password and FileVault is on -
How can I get the iTunes music on my phone on my computer as well? Some of it is there but not everything...
I had the similar problem last night and found a solution (although it takes more than a few clicks). Highlight all the album tracks in itunes on the pc and right click "get info". Check the artwork box in this window. I found that the now playing art was showing up in the itunes window, but on songs that were missing artwork showed nothing in the get info box. When I replaced the artwork by using the artwork command, or manually adding it into the "get info" window. It was annoying but my iphone updated every album.
-
I have read the thread about turning off dialpad sounds when calling a number. I used to always be able to do this on my 4S but not so since the latest software on the 5. Keyboard clicks are turned off and still have dialpad sound. I've NEVER had to mute to dial before.
I really do not think it is the iPad or your network connection. Other users have reported this very same issue. Try this and see if it works for you - it may not work - but it's easy to try - harmless - and it has worked in the past for others.
Try signing out of your account and restart your iPad.
Go to Settings>Store>Apple ID and tap the ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. Go back to Settings>Store> Apple ID and sign in again.
Maybe you are looking for
-
Same set of Records not in the same Data package of the extractor
Hi All, I have got one senario. While extracting the records from the ECC based on some condition I want to add some more records in to ECC. To be more clear based on some condition I want to add addiional lines of data by gving APPEND C_T_DATA. For
-
Value of user variable passed in sender/receiver queries
Hello experts, I have to BEx queries, one sender and one receiver, I linked them in RSBBS The problem is that I have InfoObject 0FISCPER as a user variable in the sender query and I fill it with for example "avril 2010" but in the receiver query 0FIS
-
A question about PreparedStatement and ORA-03115 error
Dear all, I have an issue with JDBC and I would appreciate if you could kindly give me a hand. I'm using: - Oracle Database 11g Enterprise (Release 11.1.0.6.0) - JDBC thin driver version: ( 11.1.0.7.0-Production) - JDK 1.6 - Operating system: Linux (
-
b The nicest APEX app / feature /b
Hello, At ODTUG I'm doing the APEX vs ADF Shoot-out, together with Lucas Jellema. The last presentation Lucas and I did last year in the Netherlands. We decided to change some things in the presentation. One of them is to include "the nicest app or f
-
Applying dynamic routing feature on outdoor wireless connection for load ba
Gentlemen, Does the Cisco outdoor wireless unit support dynamic routing (e.g. RIP or others) to do the load balancing between leased line and wireless connection. I am looking to confirm if the outdoor unit has the routing features to apply this scen