How can I record left track onto right track ?

Hi:
I have an old tape recording that is in mono on the left channel only.
I would like to to record the left channel on the the blank right channel so that there is a natural center channel output .
I have Toast 6 with jam but there is nothing that enables the transfer.
Any help would be welcome thanks, Greg

Ok I got the mono track and transferred it to itunes just fine.
However now I find that I can not do anything to it thru toast or jam
I wanted to clean it up (static) and cut the beginning, Toast 6 will not cut and jam will not accept the file AIFF.
Its not the end of the world because I can go and clean and cut the original and then transfer it thru garage band.
But it is a question in that if you transfer any garage band tune it is in some type of lock position because I also notice that there is no volume info available.
Thanks Greg

Similar Messages

How can I record multiple tracks simultaneously?

How can I record multiple tracks simultaneously? Or rather what hardware do I need to do this? I currently run guitars and mic into a PA and then the PA into Garageband. But this is just one track. I want to record the guitar as one track while simultaneously recording vocals as another track. What hardware do you suggest - keeping it affordable?

if you want to use your two chanel PA, pan 1 channel to the left, and the other to the right, and set one GB track to Mono 1 and the other to mono 2.
if you want better quality, any two channel interface will work:
http://www.bulletsandbones.com/GB/Interfaces.html

How can I record 2 tracks simultaneously in GarageBand for iOS?

I am trying to record 2 tracks at the same time, one, a line in for my guitar and the other a vocal mic. I am using an Alesis i/o Dock with my iPad Air 2, everything is updated, and everything is plugged in correctly. When I select either track from the multitrack screen, I can see that both work appropriately. However, when I hit the record button, the screen goes from the multitrack view to the track that is 'highlighted' and the record process goes from there. So if the 'amp' (guitar) track is highlighted, the app take me from the view with both on it to the 'guitar amp' selection, showing the head that I selected. Now, in the past, I have recorded 2 tracks at the same time. I still have the original recording showing both tracks and their settings. Even when I try to match the setting (both were on Left Channel, for example) it doesn't work. On my recent attempt to record (the one this question is about) I put the mic track on Right Channel and the line in on Left Channel, and vice versa. I tried putting them both on the same thinking that maybe that's what I did before because the app might not be able to do both Channels at the same time. I tried using the Mic track in stereo and the Line In on Left and tried it on Right; nothing. Has GarageBand taken this feature out on iOS? I do see if I had a Mac there is an 'Enable Multirack Recording' box to check, but I don't see anything like that for iOS... Can anyone help??

in one the YouTube Tutorials, it is not possible in iOS. but hopefully in the later version it should be.

How can I record a track off soundcloud so I can add a track?

I've been trying to get a friend's soundcloud into Garage Band so I can add another track. http://soundcloud.com/13-black-productions/tess-barr-blues-band-little-by#play The best I've been able to figure out is go to the download page where safari presents a playback bar. Then I press the play arrow, switch back to GarageBand audio recording, hit the record button, and let the song play. But I always miss the first few seconds of the playback.
If I try to start the GarageBand Audio recording first, then switch to Safari and start the playback, I see a red bar along the top of the Safari screen that says Garage Band is recording, but then the red bar flickers. When I check my recording, I find that GarageBand has stopped recording the playback at that flicker.
Also, the best settings I could figure out for recording from Safari were to add a whole bunch of bars, more than I need, turn of the metronome and count in, so I am ignoring the GB bar structure.

Download from soundcloud just gave me a playback bar with iPad Safari. But on a windows 7 desktop and Firefox, download from SoundCloud saved the SC file to downloads. Then I had to move the audio file from downloads to my music folders, then plug in the iPad to the desktop, sync, then the SC audio file showed up in Music on the IPad. Then GarageBand on the iPad copy from iTunes worked.

How can I record an Audio Instrument (saxophone) and listen to a reference track at the same time?

How can I record an Audio Instrument, and listen to a reference track at the same time?

Are you using an external audio controller or the line-in and headphone jacks on the side of your computer? You shouldn't have an issue using headphones when you're recording through the line-in but you may want to make sure you have monitoring on and it's going to the right place.
If you're using an external audio controller, try making an aggregate device combining the controller and the "built-in output" into the same device. Go to Applications/Utilities/Audio MIDI Setup, click the "+" sign at the bottom left to make a new device and check the "use" boxes to the left of the physical devices you want to use as part of that aggregate device. That is how I use the computer's speakers or headphones to monitor my input as opposed to only being able to use the output on my audio controller.
Now that I see some of the questions on the side of this page I realize that the 13" MBPs seem to have only one combined input/output jack... That is an incredibly stupid feature. What on Earth could possibly justify that design decision? I suppose if that's the problem you're having you'll have to buy some sort of splitter (if they even make them) or get an external audio controller like an Apogee Duet or something along those lines. I would be furious if they combined those two jacks on all of the MBPs.

How can i record a song in a karaoke music track via GB?

how can i record a song in a karaoke music track via GB?

First plug in some headphones.
Then drop the karaoke song into garageband. You do this by just draging and dropping the song file into garageband or if the song is in itunes just use garagebands media browser.
Now create another track (vocal track).
Put headphones on hit record and sing.
This is a bit over simplifed but give it a try someone will be here when you have more specific problems.

How can i display at JTextArea from right to left

how can i display at JTextArea from right to left?
i try to write setAlignmentX(JTextArea.RIGHT_ALIGNMENT)
but this not help,
thanks for help.

use this
JTextArea.applyComponentOrientation(java.awt.ComponentOrientation.RIGHT_TO_LEFT);

How can I separate Left and right audio channels in labview 8.5 tia sal22

How can I separate Left and right audio channels in labview
8.5 tia sal22
Greetings All
I have a working Labview vi that converts a math formula to an
audio signal. I would like to have the
right and left audio channels playing different math audio signals is this
possible?
Example
Right channel -> plays the audio signal created by a math
formula
Left channel -> plays the audio signal created by another
math formula with adjustable phase control
I’ve included a VI with a working audio and math formula but
I’m not sure how to separate the left and right channels.
I’m using labview 8.5
I looked up a similar question on the
support board and it said” use an instance of the the Sound Output Write that
has a 1D waveform data type input (i.e. Sound Output Write (DBL)). Each
element in the array would correspond to a channel.”
But I’m not exactly sure what he meant. I’m using a formula to generate the wave file
Tia sal22
Attachments:
fixed mathscript formula to sound test.vi ‏680 KB

Sorry it took so long to get back. Here's the new VI with it splitting out the left and right channels.
I'm using a Gigaport HD 8 output usb audio device but I'm experience clicks and pops. I increase the buffers
but I still get the clicks and pops. I know gigaport HD can use ASIO drivers which most likely would solve the problem but one needs to code in C for this which I'm not proficient in. Can someone recommend a work around to prevent this clicks and pops, can I somehow change my VI to fix this? Does anyone have a VI that will allow access to the ASIO latency properties?
I'm using labview 8.5
And a gigaport HD which is a USB audio device which outputs 8 analog signals (it is ASIO compatible)
tia sal22
Attachments:
lvt_audio_realtime-out left right device ID test.vi ‏68 KB

How can i record more then 2 tracks at a time?

I have my m-audio 2626 8 track preamp/interface going to my mac via firewire into le7 and i only can record two tracks at a time... is there a way to record more at on time? like 8???

It would help if you told us which computer you're using, and system software version.
Your interface has 8 x 8 ins/outs +ADAT, so you can certainly record 8 tracks at once (computer/system permitting) and you need to be running at least OS 10.4.10
LE7 was limited to 8 tracks simultaneous recording (or 12 - I don't recall) and you need to select the M-Audio device in Preferences-> Audio -> Driver. Make sure you have the latest drivers from M-Audio.
If you select an input in the I/O section your audio channel strip, how many inputs do you see? If you see more than two, you should be in business - just shift-click the record arm buttons on all your tracks and press record in your transport.
If you're using an Intel machine, you need to be running LE7 version 7.2+, preferably 7.2.3
Hope something here helps, but if you provide more information about your system you'll get some more specific ideas.

How can I record an audio sound and convert it to a ringtone?

How can I record an audio sound and convert it to a ringtone?

Record your voice using iPhone (for ringtone only 35 secs or under are valid), sync iPhone with iTunes.
In iTunes the recorded voice is listed under Music as some_numbers.m4a.
Right click on the item and choose Create AAC version.
Drag the converted voice onto the desktop.
Delete the voice copy in iTunes. (important step)
On desktop, rename the some_number.m4a to something_more_intelligent.m4r
Drag it back to iTunes and you will find it under Tones.
Now select it (for sync) and connect your iPhone, do a sync.
If everything works out, it will be in Settings > Sounds > Ringtone.
Now choose a contact you want to assign this ringtone, tap Edit and add the ringtone.
Hope this helps.

How can I record a video with LAbview?

Hi,
I have a question: How can I record a video with labview?
I have a camera (AXIS 221) connected via rj45 on PC. I see the video of the camera in a browser.
And I would to acquire the video in labview.
Could someone help me?
Thanks
Raf

Unfortunately I haven't any experience with this camera. Iguess, you should install API, then crete new VI, place ActiveX container (palette Container->ActiveX) on the Front Panel, then right mouse click, then choose Insert ActiveX object..., then found you camera object and select it and press OK. Then you probably can see image from the on the front panel. Also probably you will be able to get image data in array (how easy is it - depends from the camera API).
If you able to see image from camera in the Internet Explorer, then another method - you can put Microsoft Web Browser as ActiveX object, then you should also see the image. Disadvantage of this method - you will be not able to get image data.
Andrey.

How can I alter the track sequence of an album? It used to be possible through Get Info on old iTunes, but it doesn't seem to be an option in the new version.

How can I alter the track sequence of an album? It used to be possible through Get Info on old iTunes, but it doesn't seem to be an option in the new version.

Right click - get info.

How can I record with GarageBand 1.3 in the background using other app?

How can I record with GarageBand 1.3 in the background using other app?
I use iPad 2 with iOS 6 and GarageBand v1.3.
I'd like to play an other app like Sunrizer synth while the GarageBand is recording in the background in a track.
By now I can do it only using the build-in mic of iPad, but this is not the point.
Can I record other apps in a GarageBand track?
Thanks a lot for your time.

I suspect you are probably correct about the reasoning, although there are already a myriad of ways to do that.
Don't get me wrong - I never said I like this. But it is consistent with other Apple applications, that are similar restrictive; you cannot take a screenshot, when dvd-player is running for example.
That are the moments, when I am glad that MacOS X is a unix system under the hood

How can I merge 2 tracks into one track with iTunes 11? I used to do it with iTunes/Advanced/Join Tracks, but iTunes 11 does not have an "Advanced" button.

How can I merge 2 tracks into one track with iTunes 11?

Thanks for your reply, Jim. I imported a CD that I had burned previously with the 2 tracks of sound effects that I had downloaded from the internet (MP3 files), but I did not see an option to join the tracks when I imported the CD. In the upper right corner there were three buttons: Options, CD Info, and Import CD. When I click on Options, the drop-down menu has two choices: "Get Track Names" and "Submit CD Track Names". I cannot find an option to Join Tracks. Help!

How can I record videos on my iphone on the new iOS ?!

I've just recently updated my iOS after restoring my phone and I've lost the video icon in the camera app where it normally was! Im panicking! How can i record videos again?
Many thanks guys

Not sure what your were on before, as I'm not sure anything has changed.
You can see Photo Video , etc right above the button. Just slide it to video

How can I record left track onto right track ?

Similar Messages

Maybe you are looking for