How can I recover files from flash drive?

I've apparently lost a bunch of '.pages' files on a 16GB Lexar flash drive that were present yesterday. The '.pages' files were contained in a sub-folder. The main folder is still there and apparently okay. I am at a total lose as to where the files (and their sub-folder) have gone to. Any suggestions on a program or procedure to try to see if they're still there and recoverable? Any guidance will be GREATLY appreciated! Thanks!
I have a MAC Mini (Mid 2010), Mac OS X (10.6.8), 2.4 GHz Intel Core2Duo 8GB mem.
If I've selected the wrong community to post this question to, please help me find the right one. Thanks, again!

Peter,
Thanks for suggesting Disk Utility. I didn't know it existed, but found it and ran it. I checked 'Verify Disk' and it "Found 335234 orphaned clusters, 25174 files, 6428792 KiB free (803599 clusters)" And, then responded (in Red) "Error: This disk needs to be repaired. Click Repair Disk."
After I checked "Repair Disk" it responded: "Volume repair complete. Updating boot support partitions for the volume as required."
After then checking the flash drive the 'lost' folder and files are still not present.
I've been looking on the WEB for 'recovery programs' for MAC. I'd just as soon find a 'free' application, but would consider purchasing a program if it would work. What do you know about these 'recovery programs':
    http://www.wondershare.net/ad/data-recovery-mac.html?gclid=CKuo48CPn8ICFY_m7Aodx jYABQ
    http://help.cleverfiles.com/usb-flash-drive-recovery/
    http://www.iskysoft.com/disk-recovery/usb-flash-drive-recovery-mac.html
    http://www.easeus.com/mac/mac-data-recovery-resource/recover-mac-usb-drive.htm
Have you had any experience using any of them? There are many more out there including ones that will 'scan' your flash drive ('free') and tell you what files it can recover, then you have to purchase the full program (~$99) to actually recover them. Two of these programs are listed below:
    http://www.macintosh-data-recovery.com/?gclid=CPzujPKOn8ICFQNk7AodqFoAVw
    http://www3.softcity.com/mac-data-recovery/?tracking=SC_EN_PP_GO_SE_MDR&keyword= recover%20lost%20files%20on%20mac&gclid=CN7ArqaPn8ICFe_m7AodtFUAHg
I had even converted 7 of the original '.pages' files to '.pdf' files to eMail some friends in the universal '.pdf' format on Nov. 28th. The '.pdf' files were saved back to the original folder on the flash drive. They, also, cannot be found anywhere!!??
I can re-build the files (~150-200 photo pages from vacation trip back in May), but there were many comments and some special research (maps, etc.) I had included that I would probably not be able to duplicate exactly. Luckily the '.jpg' photos from our trip are still present on the flash drive and also on the camera's memory stick - THANK GOODNESS! However, now I am hoping that one of the recovery programs listed above might solve my problem.
Again, thanks for your help, but I'm not THERE yet!

Similar Messages

How can I recover files from an iPod Touch (4th gen) prior to a required restore?

How can I recover files from an iPod Touch (4th gen) prior to a required restore?
The iPod Touch was working perfectly fine. iTunes suggest that I update the iPod Touch to the latest operating software, and I proceeded to do so. Then a message popped up stating that the iPod Touch needs to be fully restored - and that all data will be lost. The iPod Touch now displays the 'plug into iTunes' screen, and is stuck there. There are irreplaceable family momentos on the iPod Touch. How can I recover files from an iPod Touch prior to a required restore? HELP...

Your only hope is to contact a data recovery company. When it shows the connect to iTunes screen the iPod is essentially deleted.
You can restore from an existing backup

How can I recover files from an iMac 2009 with a broken graphic card.

My old iMac has a broken graphics card. Instead of getting it replaced or fixed I needed a computer quickly. I decided to get a MacPro. I'm able to boot up the old iMac and my MacPro can now read the files in the iMac. I have been transferring files from the old iMac to the MacPro via ethernet connection as the USB to USB was running slow. Is there a faster way to transfer the files between the two?
Is there a way I can delete the files on the iMac when I'm done transferring the files I wanna keep? Right now it won't let me delete anything from the iMac hard drive especially the locked Files.
Is there a way I can connect another monitor to the iMac if it has a broken graphics card? I'm assuming it's the graphics card cause I researched it on youtube and my iMac has the same screen they're describing when you have a graphics card issue.
Thanks.

What is the iMac model? Does it have Thunderbolt? Do you have Firewire? Can you connect them via any combination of Firewire & Thunderbolt?
Thunderbolt & Firewire support something called 'target disk mode'
How to use and troubleshoot FireWire target disk mode
OS X Mountain Lion: Transfer files between two computers using target disk mode
That will allow you to see the iMac as an 'external hard disk'. They are the fastest way to access the full disk.
At the moment it sounds like you are using file sharing over ethernet - this is not the way to access everything on the iMac's disk & will result in you failing to copy data that you don't have read permission.
You can also erase the iMacs HD over target disk mode if you really want to remove the OS & data.
I don't believe it is possible to connect up two Macs via USB to USB so please clarify what you used. You may have been doing the right thing before you switched to ethernet.
EDIT:
Nevermind about the model, 2009 iMacs didn't have Thunderbolt so you will need to use Firewire 800 to Thunderbolt.

Satellite L40: How do I recover files from Hard Drive

Hi
Can anyone help me please. About one week ago I started experiencing a clicking sound coming from my Satellite L40 laptop. My laptop froze and when I restarted it, I was directed to the system setup with a message at the bottom saying
"Pri Master Hard Drive Disk SMART status bad, Backup and replace.
Press F2 to presume."
I have pressed F2 but I haven't a clue what to do?
Can anyone tell me how to backup my files before my hard drive has completly gone or if it has gone can I use another device to get them off.
I have tried to use the recovery disk but the disk is not responding??
Please help
Pete

Hi
This messages looks like an warning notification from the S.M.A.R.T.
It does mean that your HDD will eventually fail.
It could happen next days or it may not happen for a few months but the SMART capability has detected that the drive is going bad so it should be replaced as soon as possible.
It looks like your notebook is not very old so the warranty should cover all replacements.
I see only one way to access and backup the data. Possibly you could buy an external USB SATA HDD enclosure and could connect the HDD to another computer.
Im not sure if you will be able to access the HDD due to the malfunction but if you want you could try this.
Good luck

How can I recover files from an hard disk that DiskUtility cannot rapair?

When I push the power button of my PowerBook, while the computer is rebooting and you see the gray screen with the apple, the black screen appears saying that I have to restart the computer!
I have connected the Power Book to another Mac BookPro 2.33Ghz, intel Core Duo 2G RAM via firewire.
In the Mac bookPro desktop I cannot see the HD, and disk utility indicates this problem:
+Verify and Repair disk “Macintosh HD”+
+Invalid Volume Header+
+Checking HFS Plus volume.+
+Checking Extents Overflow file.+
+Checking Catalog file.+
+Invalid node structure+
+Volume check failed.+
+Error: The underlying task reported failure on exit+
+1 HFS volume checked+
+ 1 volume could not be repaired because of an error+
+and then:+
+Disk Utility stopped repairing “Macintosh HD” because the following error was encountered:+
+The underlying task reported failure on exit.+
Of course, I didn't try to format it, because the HD contains data that I don't want to lose.
I tried "Data Rescue II", and I can see and scan the HD, but it seems that I can only recover deleted files...
Any suggestions on how to repair the HD without losing the files?
Or a software suggestion that at least lets me first recover the files. If I recover the files, then I will try to reformat the HD.
Ciao!
beppe

Before giving up I would try Alsoft Disk Warrior which may be able to fix the problem:
http://www.alsoft.com/DiskWarrior/index.html
If this doesn't work out you can usually recover most of your files with Prosoft's Data Rescue II:
http://www.prosofteng.com/products/data_rescue.php
Message was edited by: Zlig

How can I recover files from my Windows 7 backup cd's on Windows 8 laptop?

1. HP ENVY m6 Notebook PC
2. Windows 8
3. No Error Messages
4. No Changes
I had an hp laptop with windows 7 on it. After it crashed a couple of times, I made backup dvds using hp's file backup. It actually came out to 11 dvds. I bought a new hp laptop which came with Windows 8. I tried running the application on the dvd's, but it skips over all the files and installs nothing. How do I recover my files on these dvd's?

Hello thelink484,
To me, it sounds like you recovered your operating system and all the preloaded software, on 11 dvd's. You cannot simply install everything like this, from Windows 7 to Windows 8.
You will need to restore on a windows 7 machine, then backup your user files that you want to move to Windows 8.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

How can I recover files from a hard disk that I erased using the Erase Disk command in Disk Utility?

Thanks for your help!

Kappy wrote:
True but a DVD is a lot less expensive than the cost of commercial recovery software. TestDisk is also free but it is a set of Terminal programs.
Yes, it's not for GUI only using folks.
Free Linux alternatives are awkward. First, you have to download a Linux ISO and burn it to a DVD. Then boot the live demo and install Linux. That requires first partitioning the hard drive. And, on and on. It's nice if you already have a Linux installed.
Linux doesn't have to be installed. It can be loaded into RAM for the duration of the recovery.
Even if PartedMagic can be downloaded with a bootable Linux system it must still be burned to a DVD.
Any computer can be used to burn the ISO to disk, which makes it attractive in that regard.
Once PM is burned and booted off of it's loaded into RAM and flushed upon a reboot.
But the data recovery software in PM requires familiarity of the command line. That's it's drawback unfortunately.
However one can transfer files that were not deleted using this method.
...using recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.
Those "bootable cd's" of Data Rescue, File Salvage, and TechTool are probablly using Linux as it's a free OS.
Apple won't allow their OS to be used, Microsoft charges a huge license fee. So that only leaves Linux.
The user likely won't know that they are using Linux when using the bootable recovery disk, all they see is the recovery GUI.
Data Rescue is likely best downloaded, installed and run from a familiar OS X installed on a new HFS+ formatted external drive, then option booted from.
This would be faster than waiting for bootable disks to arrive in the mails. One has to use a exteranl drive anyway larger than the drive being recovered to hold all the potential recovered data.

How can i recover files from iphone 3gs 4.2.1 while in recovery mode ?

I had tried already multiple ways to get it off recovery mode but nothing works...it went into recovery mode while it was charging :( .. I REALLY DON'T WANT TO LOOSE MY DATA because just a couple of weeks ago my dad deleted EVERYTHING from our computer and now i don't have any of my backups PLEASE HELP ME !!

Did you try using RecBoot to kick it out of recovery mode? Try doing a manual install.
Basic troubleshooting steps.
Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
 MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

How can I access files from a flash drive that were previously saved using a Windows computer? When I attempt to open the file on MacBook Pro, it is asking to "convert file to"; I also have Microsoft Word installed on the Mac as well.

How can I access files from a flash drive that were previously saved using a Windows computer? When I attempt to open the file on MacBook Pro, it is asking to "convert file to"; none of the options I choose work. I also have Microsoft Office (with Word) installed on the Mac as well.

Format the external drive as FAT32 or ExFAT. Both computers will then be able to read and write to it.

How can I transfer files from one external HD (WD My Passport) to another external HD (Seagate Backup Plus)? WD drive was improperly ejected and Finder no longer recognizes it. Tried fixing with Disk Utility but failed.

How can I transfer files from one external HD (WD My Passport 2T) to another external HD (Seagate Backup Plus 2T)? WD drive was improperly ejected (although we did tell it to eject) and now Finder no longer recognizes it. Using MacBook Pro and I just upgraded to Yosemite before this happened. Was told at Apple Store to use Disk Utility to repartition, but it failed. It says to backup files and restore. But how do I backup files? Or would appreciate any other suggestions to repair drive.

You may drag & drop between external hds.
Should you run into trouble.
Take the exernal drive appart. Take out the harddrive. Try reading the data via a usb adapter. Put a household finan on the hd.
http://www.cablewholesale.com/products/usb-firewire/usb-2.0-products/product-40u 2-01000.php?utm_source=Nextag&utm_medium=cpc&zmam=54972865&zmas=1&zmac=4&zmap=4 4 77

I have deleted my private folder and do not have enough space to reinstall my operating system. How can i transfer files from my hard drive to an USB drive to free up space when the operating system isn't working. or do i need to erase disk?

i have deleted my private folder and do not have enough space to reinstall my operating system. How can i transfer files from my hard drive to an USB drive to free up space when the operating system isn't working. or do i need to erase disk through disk utilities without erasing data (but will it delete my programs such as photoshop, office, creative suite?

Connect the computer to another Mac and put it in FireWire Target Disk mode, or use the Disk Utility to clone the drive or image specific folders with the USB drive as the target. After you've copied off everything you want, you'll likely need to erase the drive and reinstall the applications.
(69695)

Can't open files from iCloud Drive on Mac

Hi,
Can't open file from iCloud Drive on my MacBook Air (OS X 10.10.1).
I created new file (in Numbers for example). Then Numbers->File->Open->iCloud Drive->my_file.numbers and it says "Can't open file my_file.numbers".
I can preview the file by pressing Space, but openning from application and double-click on it doesn't work.
Files that were created earlear also not opened.
Does anybody know how to solve this problem? thanks.

Using smtp.mail.me.com - also tried smtp.me.com
SSL yes
port 587
SMTP Authentification Yes
Security SLS/TLS - also tried STARTTLS
User full **@me.com email address - also tried user name without @me.com
I have spoken to apple support this afternoon and we tried the variations shown above.
Support told me to wait for a day and try again!
After the iCloud authentication problem last night I changed all my passwords I wonder if there is an SMTP problem at me.com perhaps not reading the updated passwords?
I'll try and use the old passwords later.

How can i copy files from one external hard disk to another using macbook pro with retina display

How can i copy files from one external hard drive to another using macbook pro with retina display?

That's odd - if you open Disk Utility (Applications->Utilities) and select the disk(s), how are they formatted? If you're only going to be used with your Mac, they should be formatted as "Mac OS Extended (Journaled)".
Clinton

How can i store files from a PC on time capsule

How can i store files from a PC on Time Capsule

Actually although the format on the TC is not NTFS but Mac HFS+, that is irrelevant as far as windows is concerned. The TC offers SMB protocol to the network.. so how the TC stores the files is totally irrelevant.
1. TC is by nature not particularly SMB happy..
Change all names, TC and wireless to SMB compatible. Short, no spaces, pure alphanumeric.
Turn on the guest account to read write access.. assuming you don't have security issues.
Set the workgroup correctly.. don't use wins server.. no body does nowadays.
Note short no space names.. guest access and workgroup all set.
2. Download and install airport utility for windows or just bonjour for windows.. bonjour should be included with the full uitlity but that is not necessary.
3. Just doing the above when bonjour loads it should bring up TC as accessible.. if not, or you need to access it manually.. open windows explorer and type in the address bar.
\\TCName or \\TCIPaddress .. obviously replacing the generic name with the actual one used. In my case. as per the above screen shot. \\TCGen3
You will then see the main root directory of the TC.. data or whatever it is named..
Create a new directory under the root directory for your windows files.. and copy them there.
Note .. some issues can arise if you are using the TC for TM backups.. Please keep a large enough amount of free space available that TM still works.. pondini recommends using disk images.
http://pondini.org/TM/TCQ3.html
As long as you still have plenty of free space this is not an issue but TM may have issues when it fills the drive as it is designed to do.

How can i open file from adobe reader..i already have adobe read

how can i open file from adobe reader..i already have adobe reader installed and cannot open a
file and i cannot convert my file into pdf..

Is the file really a PDF? Where is it? Have you tried opening it from within Reader?

How can I recover files from flash drive?

Similar Messages

Maybe you are looking for