How can I recover iPhotos from my hard drive?

I screwed up my MacBook Pro by adding a exFAT partition while operating in BOOTCAMP.  Now I cannot start my machine.  I can probably pull my hard drive and enter it as the OS Yosemite was probably not affacted.  Is there a way to retrieve all my photos so when I reinstall everything I will be able to put them back on iPhoto?

If you’re able to access the drive, open your home folder on it, then Pictures, and copy the iPhoto library to another volume formatted as Mac OS Extended.
(120439)

Similar Messages

  • I have deleted my private folder and do not have enough space to reinstall my operating system. How can i transfer files from my hard drive to an USB drive to free up space when the operating system isn't working. or do i need to erase disk?

    i have deleted my private folder and do not have enough space to reinstall my operating system. How can i transfer files from my hard drive to an USB drive to free up space when the operating system isn't working. or do i need to erase disk through disk utilities without erasing data (but will it delete my programs such as photoshop, office, creative suite?

    Connect the computer to another Mac and put it in FireWire Target Disk mode, or use the Disk Utility to clone the drive or image specific folders with the USB drive as the target. After you've copied off everything you want, you'll likely need to erase the drive and reinstall the applications.
    (69695)

  • How can I move music from a hard drive to iphone

    How can I move music from a hard drive to iphone?

    Import it into an iTunes library and then sync the iPhone with that library. If desired, launch iTunes with the Shift key held down and create or choose an iTunes library on that drive.
    (106987)

  • How can i restore info from my hard drive to my new mac

    I have an "old" black macbook, that I have backed up on an external hard drive using time machine.  I recently got a new (aluminum) macbook and i want to transfer my data from my hard drive to my new computer (itunes library, photos, etc...).  I do NOT have ilife or iwork on my new computer, but i have it on my old macbook which (in theory) should be backed up on my external HD.  Is it possible to transfer applications like that to my new computer if I "disable" it from my old computer?  I also just got a new iphone 5 and would like to be able to sync it to my new computer but my itunes library is empty (until i take stuff from my hard drive and put it on my new computer).  Obviously my old macbook will not support the software needed to hook up my new iphone to itunes, but my new computer will.  So I beg the answer to my question...how do i get my stuff from one computer to the new one and can i transfer applications such at iphoto, pages, (ilife, iwork)...legally by disabling from my old computer?????
    PLEASE HELP!

    Have a read here How do I set up a new Mac from an old one, its backups, or a PC?
    Stefan

  • How can I recover files from a hard disk that I erased using the Erase Disk command in Disk Utility?

    Thanks for your help!

    Kappy wrote:
    True but a DVD is a lot less expensive than the cost of commercial recovery software. TestDisk is also free but it is a set of Terminal programs.
    Yes, it's not for GUI only using folks.
    Free Linux alternatives are awkward. First, you have to download a Linux ISO and burn it to a DVD. Then boot the live demo and install Linux. That requires first partitioning the hard drive.  And, on and on. It's nice if you already have a Linux installed.
    Linux doesn't have to be installed. It can be loaded into RAM for the duration of the recovery.
    Even if PartedMagic can be downloaded with a bootable Linux system it must still be burned to a DVD.
    Any computer can be used to burn the ISO to disk, which makes it attractive in that regard.
    Once PM is burned and booted off of it's loaded into RAM and flushed upon a reboot.
    But the data recovery software in PM requires familiarity of the command line. That's it's drawback unfortunately.
    However one can transfer files that were not deleted using this method.
    ...using recovery software such as Data Rescue II, File Salvage or TechTool Pro.  Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.
    Those "bootable cd's" of Data Rescue, File Salvage, and TechTool are probablly using Linux as it's a free OS.
    Apple won't allow their OS to be used, Microsoft charges a huge license fee. So that only leaves Linux.
    The user likely won't know that they are using Linux when using the bootable recovery disk, all they see is the recovery GUI.
    Data Rescue is likely best downloaded, installed and run from a familiar OS X installed on a new HFS+ formatted external drive, then option booted from.
    This would be faster than waiting for bootable disks to arrive in the mails. One has to use a exteranl drive anyway larger than the drive being recovered to hold all the potential recovered data.

  • How can I recover files from an hard disk that DiskUtility cannot rapair?

    When I push the power button of my PowerBook, while the computer is rebooting and you see the gray screen with the apple, the black screen appears saying that I have to restart the computer!
    I have connected the Power Book to another Mac BookPro 2.33Ghz, intel Core Duo 2G RAM via firewire.
    In the Mac bookPro desktop I cannot see the HD, and disk utility indicates this problem:
    +Verify and Repair disk “Macintosh HD”+
    +Invalid Volume Header+
    +Checking HFS Plus volume.+
    +Checking Extents Overflow file.+
    +Checking Catalog file.+
    +Invalid node structure+
    +Volume check failed.+
    +Error: The underlying task reported failure on exit+
    +1 HFS volume checked+
    + 1 volume could not be repaired because of an error+
    +and then:+
    +Disk Utility stopped repairing “Macintosh HD” because the following error was encountered:+
    +The underlying task reported failure on exit.+
    Of course, I didn't try to format it, because the HD contains data that I don't want to lose.
    I tried "Data Rescue II", and I can see and scan the HD, but it seems that I can only recover deleted files...
    Any suggestions on how to repair the HD without losing the files?
    Or a software suggestion that at least lets me first recover the files. If I recover the files, then I will try to reformat the HD.
    Ciao!
    beppe

    Before giving up I would try Alsoft Disk Warrior which may be able to fix the problem:
    http://www.alsoft.com/DiskWarrior/index.html
    If this doesn't work out you can usually recover most of your files with Prosoft's Data Rescue II:
    http://www.prosofteng.com/products/data_rescue.php
    Message was edited by: Zlig

  • How can I reinstall iphoto on new hard drive?

    Original purchase came with iphoto installed.  After hard drive crash new hard drive does not have iphoto app.  Anyone have any idea how to reinstall without having to purchase?  Had to install original OS X 10.6.8 Snow Leopard

    reinstall from the original source
    Could be
    1 - the restore disks that came with the computer - if it came with CDs and you do not know where they are then contact Apple to see if they can be replaced = probably your case
    or
    2 - the iLife DVD that you purchased
    or
    3 - the app store - log in under the Apple id used to purchase the software or to set up the computer - look under purchases - you might have to unhide or accept the Application first
    LN

  • How to properly recover data from "broken" hard drive?

    Hello Mac users,
    I have a mid 2012 Mountain Lion MacBook Pro. My hard drive recently failed. As I have been working in Thailand, I decided to bring my laptop an Authorized Service Provider (Macintosh Center Co., Ltd.) in Bangkok. Their diagnostic was that my hard drive wasnt working anymore, and I had to change it. The problem is, since I had no backup, I asked them to recover my data and transfer to the new hard drive. But, this Apple Authorized Service Provider told me I had to go somewherelse because they have no software to recover my data! So, I went to the local Joe's repair computer store who retrieved my data from the problematic hard drive to the new one. Now, the problem is that all my "old" data is located in "orphan folders". In other words, counteless files were retrieved without folders and settings.
    So, I would like to know if it is possible to recover my data with all the settings I had and then transfer it to my new hard drive. If it's possible, what software should I use to properly recover my data? If it's not possible, how should I deal with the "orphan folders" and my current settings?
    Thanks in advance for your help.

    First stop using your system, then get a copy of a program that will recover files like Data Rescue 3.  If you have a time machine backup you may be able to restore them. 

  • How can I transfer Itunes from external hard drive to a new computer?

    Hello,
    I had a Dell laptop with Windows XP on it recently crash, but I have everything saved to a Seamagine external 1 terabyte hard drive. I have about 250 gigabytes of media on it, mostly CD's and audiobooks. The setup I had on the XP computer was my Itunes folder saved on the C drive, but I kept all the actual music and audiobooks on the external hard drive, which was labeled the F drive.
    After the crash, a relative sold me their three year old Compaq laptop, with Windows 7 instead of XP as the OS. My relative already had Itunes downloaded on it, but when I opened the Itunes on the new (new to me) laptop, Itunes only recognized their (my relative's) account. So, I uninstalled their Itunes and then I re-downloaded Itunes for 64-bit Windows 7. I then opened the Windows Explorer folder so to drag and drop my backed up Itunes folder and library information from the old C drive to the new Itunes folder in the new C drive. But, it wouldn't do anything. It still wanted the password info from my relative's account. It wouldn't recognize my account, even though I had uninstalled and then reinstalled a newer version of Itunes. Dragging and dropping my backed-up Itunes folder from my external hard drive to the new C drive didn't work because it said it didn't have certain permissions or something like that. I think I might have downloaded a newer version of Itunes, different from what I had saved a couple of days ago, which might be one of the problems here, not to mention that I switched OS's from XP to Windows 7. 
    When I plugged the external hard drive USB into the new laptop no Seamagine manager came up for user-friendly accessibility. I didn't know what to do, so I installed Seagate Dashboard onto the new computer. It didn't do anything for me either. No problem, I thought, I'll just use Windows Explorer to move the Itunes library, and then once I transfer (i.e., drag and drop) the old Itunes folder to the one, all will be as it was. I could then direct my Itunes account to use my external hard drive as the media source folder. I was wrong. It won't let me do that either. It says I don't have permission to do it. 
    How c an I get my old Itunes library info onto the C drive of this new computer, but keep the 250GB of media files on the external hard drive, just like the setup I had on the old laptop before it crashed? If you can help me, then you will be my hero. I'm scared to death that I've lost my library info and afraid to mess with it too much more for fear of erasing it or, worse, losing the 250 GB of media that is on the external hard drive, which has taken me a tremendous amount of time and money to compile. It is, in effect, irreplaceable. I'm very worried and frustrated. I've been working on this for days, to no avail. You're my last hope. Thank you.

    Hmm, I think we should start over...
    Here are the typical layouts for the iTunes folders:
    In the image above the red outline denotes the "media folder", that is the folder listed under Edit > Preferences > Advanced. In the standard layout where the "media folder" is inside the "library folder" the iTunes library has the advantage of being self-contained and portable. Since you've lost the "library folder" from your old computer you're going to have to start over so you might as well get organized properly.
    If the folder curently holding your media files is called G:\iTunes then rename it as G:\Media.
    The support doc How to open an alternate iTunes Library file or create a new one explains how to create a new iTunes library where you want it. In short click the icon to start iTunes and immediately press and hold down the shift key. Keep holding until asked to choose or create a library, click Create and browse to G:\, make sure the folder is going to be called iTunes and click save.
    Move the folder that actually holds the media inside the folder G:\iTunes\iTunes Media. We're going to let iTunes reorganize everything (unless you have a collection of .wav files in which case stop and tell me because they require a different approach).
    Use File > Add folder to library and select the folder G:\iTunes\iTunes Media. iTunes will search through the whole series of subfolders adding all media files into the library and reorganizing them into the correct artist & album folders.
    Again, for data security, you really ought to obtain a second external drive at some point and backup your library to it. Only having one copy, as you have found, leaves you vulnerable to failure. External drives are no less prone to it.
    A) Windows uses \ as a folder separator in path descriptions, Mac uses /.
    B) Do you have a backup of the iTunes folder that was on drive C:\ or are you simply referring to the location of your media as a "backup" when it really the only copy? If you have a backup copy of your "original" iTunes library you could move/copy that to G:\iTunes shift-start-iTunes to open it, and then I can offer tools or techniques for fixing the links that will be broken becuase the drive letter has changed.
    C) Use Store > Sign out and then Store > Sign in to sign into your iTunes account. You will also need to use Store > Authorize the computer to allow playback and transfer of any protected content. If your new library contains protected content from any other accounts then you will have to authorize the computer for those too.
    tt2

  • How can I rescue data from bad hard drive

    My imac stop working last night. The imac goes to the apple logo and then it shut itself. I had ubuntu on my other partition, so when there and I was able to see the Macintosh HD. I called Apple care and they asked me to do a repair disk from my installing DVD, but I was getting repair failed. After couple of time he told me that the only way to fix this is by installing from the beginning, like erasing everything. I had a back from last year and I had some picture that I hadn't backup. So, I decide to buy an hard drive. When I came back, I when to ubuntu and I was still able to see the Macintosh HD. I was having problem on ubuntu, so I decide to reboot and then I didn't have neither Mac partition nor Ubuntu. I insert the leopard dvd and when I check my hard drive on disk utility, I don't see any partition. I would like to know if there is a way to recover the data that I had on my mac partition. By the way everything happen after I upgraded Safary.

    Hi
    If you can't access the drive using the normal methods (DU) you might be struggling? You could have a go and use something like Data Rescue:
    http://www.prosofteng.com/
    As long as the drive is spinning you might stand a chance? If you can physically hear the drive whirring/clicking or making cricket/scratching like noises or a slight hum when its powered up you might be wasting your time?
    If the drive sounds 'normal' you might want to try:
    http://www.alsoft.com/
    If you were so inclined and able you could set up your own highly controlled and engineered environment. Physically take the drive apart and try to read the platters themselves. You would need specialized software (expensive) or you could develop something suitable yourself.
    Tony

  • How can I restore bookmarks from a hard drive?

    I had a hard drive problem and could not run windows in the hard drive.I was able to copy the drive to another drive.
    Now what I would like to do would be to find a file that has the bookmarks on that drive at included on the new hard drive.
    Can this be done?
    We would I find the files?

    The bookmarks, along with the history is stored in a file called places.sqlite inside the profile folder. In Windows 7 the default location for the profile folder is:
    C:\Users\<Windows user name>\AppData\Roaming\Mozilla\Firefox\Profiles\<profile folder>
    The profile folder name will typically be xxxxxxxx.default, where xxxxxxxx is a random set of characters. The profile folder is normally hidden, to display it see http://kb.mozillazine.org/Show_hidden_files_and_folders
    With Firefox closed you can copy the places.sqlite file from this location into your current profile folder. You can recover more than just the bookmarks, for details see [[Recovering important data from an old profile]].

  • Can I recover data from a hard drive that has crashed?

    My computer had frozen up so I had to restart it by holding down the power button. After I had done this, I kept getting a recurring kernel panic error. I had taken my MacBook the Apple Store and the tech who looked at it said that my hard drive was no longer good and that I would either have to replace it or purchase a new laptop. Regardless of whether I replace my hard drive or just purchase a new laptop, would there be any way to get my data that I lost off my old hard drive. I have some stuff backed up, but not recent data.
    I appreciate any advice. Thanks

    You could try putting the old hard drive into an external hard drive case since it sounds like the drive isn't completely dead.
    Here's a cheap SATA external hard drive case on Amazon. http://www.amazon.com/SATA-Hard-Drive-Case-Enclosure/dp/B001AAVA08/ref=pd_cp_e_0

  • IPhoto 11 - How can I import photos from my hard drive keeping the folders the way they are?

    I recently went from PC to Mac.  I transferred thousands of photos, many of which I had in albums.  When I imported them into iPhotos, it didn't seem to preserve my albums, unless I'm not seeing something.  Is there a way to do that?

    To begin with we only have words to communicate with on this forum so it is critical that we use the same ones
    in iPhoto you have a library which can be views as events, photos, places or faces  --  events and photos view show all photo in your library and faces and places show only thos that have faces or places assigned
    albums are logical entities that are pointers to the photos in the library and are used for organization
    folders are logical entities that hold albums or other folders and also are used for organization
    The photos (by default and recommended) are copies into th eiPhoto library with is a SQL database. you ony access the photos using the iPhoto program or the media browser which is in the lower left hand corner of each open/attach/upload window
    If you drag a folder of photos onto the open iPhoto window it will import them and create an event names the same as the folder  if you drag the foldr of photos to the source pane on the left it will import them into an event and create an album
    The biggest problem most windows users have is thinking of managing their photo with a database rather than the old way of managing files with  a file manager
    iPhoto is much more powerful since you can serach the database on any criteria
    Hope this helps
    It also would be helpful to watch the iPhoto tutorials under getting started - http://www.apple.com/support/iphoto/
    LN

  • How do i transfer iphoto from external hard drive?

    I had a macbook, i purchased a macbook pro.
    I put my 32K photos and i photo on an external harddrive "Seagate goflex desk 2tb")
    This went well, on this external harddrive all files/ photos and events/subfolders are stored perfectly just like original.
    Now...
    I want to bring all of the photos and events/subfolders, to my macbook pro from the external harddrive. I have viewed them on my pro, but i have not brought them over.  I have read all the problems, so i want to make sure i do it exactly right when i transfer in, keeping all of the folders etc intack.
    Please give me very specific instructions.
    I have MAC OS X 10.7.4
    The iphoto is Iphoto 11 Vs. 9.3.2
    I appreciate you taking the time!

    Are you running a Managed or a Referenced Library?
    A Managed Library, is the default setting, and iPhoto copies files into the iPhoto Library when Importing. The files are then stored in the Library package
    A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. (You unchecked the option to copy files into the Library on import) The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management. 

  • I had a power mac g4 into which i put 3, 320 gb PATA hard drives in a raid slice config so that it worked as one drive needless to sat that i lost the g4 to a surge but the drives are good. now i have an imac, how can i recover the info off those drives

    i had a power mac g4 into which i put 3, 320 gb PATA hard drives in a raid slice config so that it worked as one drive needless to sat that i lost the g4 to a surge but the drives are good. now i have an imac, how can i recover the info off those drives. can i put the drives in external cases and plug them all in, will the imac see them as a raid slice then  help please

    Before you have another accident:
    Buy a UPS of good quality and sufficient to your needs.
    I would have to assume that the drives were connected to a PCI PATA card, hopefully. Otherwise, well RAID and having drives on the same bus (master and slave).
    And no backup, none at all...
    Get your hands on a G4.
    Data Rescue 3 from Prosoft maybe.
    If they were SATA and running on PCI SATA controller, very popular and common really in G4s, more options would be open.

Maybe you are looking for