How can I redirect Batch Report Files to a different directory.
I have a custom version of the Batch Process Model that allows for on the fly report updates. At the end of execution the final report is written. I need to redirect this final report to another directory, but I am having trouble identifying where the report directory is specified. Right now, it is writing in the same directory as the sequence file and I need to change this.
Hi Terry,
have a look at the following inside the process model TestUUTs (or Single Pass)
Locals.ModelData.ReportOptions.DirectoryType
set this to "SpecificDirectory"
then in
Locals.ModelData.ReportOptions.Directory
set this to your target directory.
If it's a permanent setting, then I'd suggest updating these values before run time in the report options panel from the Configure menu option.
If it can be determined before the sequence is run, then you could do it as part of the report options callback. Otherwise, slot it in as and when needed, just before the call to the Determine Report File Path and Determine UUT Report File Path steps, although I guess that depends on how much you've modified the process model so far.
Hope that helps
S.
// it takes almost no time to rate an answer
Similar Messages
-
How can I change the report file name depending on which seq file is run in the main seq?
I'm using TestStand 3.0.
I have a main sequence file with a menu option to select one of several sequence files to run.
How can I get TestStand to change report file name to the selected sequence file rather than the main sequence file name?
Thanks
HarminderHi Harminder
Try RunState.Root.Locals.ReportFilePath = "PathToMyFile.xxx"
regards
Juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e= -
What i get is only the directories and files that in other nodes. But i have also files on the root directory and i never
get them. This is a screenshot of my program after i got the content of my ftp. I'm using treeView to display my ftp content:
You can see two directories from the root but no files on the root it self. And in my ftp server host i have files in the root direcory.
This is the method i'm using to get the directory listing:
public IEnumerable<FTPListDetail> GetDirectoryListing(string rootUri)
var CurrentRemoteDirectory = rootUri;
var result = new StringBuilder();
var request = GetWebRequest(WebRequestMethods.Ftp.ListDirectoryDetails, CurrentRemoteDirectory);
using (var response = request.GetResponse())
using (var reader = new StreamReader(response.GetResponseStream()))
string line = reader.ReadLine();
while (line != null)
result.Append(line);
result.Append("\n");
line = reader.ReadLine();
if (string.IsNullOrEmpty(result.ToString()))
return new List<FTPListDetail>();
result.Remove(result.ToString().LastIndexOf("\n"), 1);
var results = result.ToString().Split('\n');
string regex =
@"^" + //# Start of line
@"(?<dir>[\-ld])" + //# File size
@"(?<permission>[\-rwx]{9})" + //# Whitespace \n
@"\s+" + //# Whitespace \n
@"(?<filecode>\d+)" +
@"\s+" + //# Whitespace \n
@"(?<owner>\w+)" +
@"\s+" + //# Whitespace \n
@"(?<group>\w+)" +
@"\s+" + //# Whitespace \n
@"(?<size>\d+)" +
@"\s+" + //# Whitespace \n
@"(?<month>\w{3})" + //# Month (3 letters) \n
@"\s+" + //# Whitespace \n
@"(?<day>\d{1,2})" + //# Day (1 or 2 digits) \n
@"\s+" + //# Whitespace \n
@"(?<timeyear>[\d:]{4,5})" + //# Time or year \n
@"\s+" + //# Whitespace \n
@"(?<filename>(.*))" + //# Filename \n
@"$"; //# End of line
var myresult = new List<FTPListDetail>();
foreach (var parsed in results)
var split = new Regex(regex)
.Match(parsed);
var dir = split.Groups["dir"].ToString();
var permission = split.Groups["permission"].ToString();
var filecode = split.Groups["filecode"].ToString();
var owner = split.Groups["owner"].ToString();
var group = split.Groups["group"].ToString();
var filename = split.Groups["filename"].ToString();
var size = split.Groups["size"].Length;
myresult.Add(new FTPListDetail()
Dir = dir,
Filecode = filecode,
Group = group,
FullPath = CurrentRemoteDirectory + "/" + filename,
Name = filename,
Owner = owner,
Permission = permission,
return myresult;
And then this method to loop over and listing :
private int total_dirs;
private int searched_until_now_dirs;
private int max_percentage;
private TreeNode directories_real_time;
private string SummaryText;
private TreeNode CreateDirectoryNode(string path, string name , int recursive_levl )
var directoryNode = new TreeNode(name);
var directoryListing = GetDirectoryListing(path);
var directories = directoryListing.Where(d => d.IsDirectory);
var files = directoryListing.Where(d => !d.IsDirectory);
total_dirs += directories.Count<FTPListDetail>();
searched_until_now_dirs++;
int percentage = 0;
foreach (var dir in directories)
directoryNode.Nodes.Add(CreateDirectoryNode(dir.FullPath, dir.Name, recursive_levl+1));
if (recursive_levl == 1)
TreeNode temp_tn = (TreeNode)directoryNode.Clone();
this.BeginInvoke(new MethodInvoker( delegate
UpdateList(temp_tn);
percentage = (searched_until_now_dirs * 100) / total_dirs;
if (percentage > max_percentage)
SummaryText = String.Format("Searched dirs {0} / Total dirs {1}", searched_until_now_dirs, total_dirs);
max_percentage = percentage;
backgroundWorker1.ReportProgress(percentage, SummaryText);
percentage = (searched_until_now_dirs * 100) / total_dirs;
if (percentage > max_percentage)
SummaryText = String.Format("Searched dirs {0} / Total dirs {1}", searched_until_now_dirs, total_dirs);
max_percentage = percentage;
backgroundWorker1.ReportProgress(percentage, SummaryText);
foreach (var file in files)
TreeNode file_tree_node = new TreeNode(file.Name);
file_tree_node.Tag = "file" ;
directoryNode.Nodes.Add(file_tree_node);
numberOfFiles.Add(file.FullPath);
return directoryNode;
Then updating the treeView:
DateTime last_update;
private void UpdateList(TreeNode tn_rt)
TimeSpan ts = DateTime.Now - last_update;
if (ts.TotalMilliseconds > 200)
last_update = DateTime.Now;
treeViewMS1.BeginUpdate();
treeViewMS1.Nodes.Clear();
treeViewMS1.Nodes.Add(tn_rt);
ExpandToLevel(treeViewMS1.Nodes, 1);
treeViewMS1.EndUpdate();
And inside a backgroundworker do work how i'm using it:
var root = Convert.ToString(e.Argument);
var dirNode = CreateDirectoryNode(root, "root", 1);
e.Result = dirNode;
And last the FTPListDetail class:
public class FTPListDetail
public bool IsDirectory
get
return !string.IsNullOrWhiteSpace(Dir) && Dir.ToLower().Equals("d");
internal string Dir { get; set; }
public string Permission { get; set; }
public string Filecode { get; set; }
public string Owner { get; set; }
public string Group { get; set; }
public string Name { get; set; }
public string FullPath { get; set; }
Now the main problem is that when i list the files and directories and display them in the treeView it dosen't get/display
the files in the root directory. Only in the sub nodes.
I will see the files inside hello and stats but i need also to see the files in the root directory.
1. How can i get and list/display the files of the root directory ?
2. For the test i tried to add to a List<string> the items in var files to see if i get the root files at all.
This is what i tried in the CreateDirectoryNode before it i added:
private List<string> testfiles = new List<string>();
Then after var files i did:
testfiles.Add(files.ToList()
But this is wrong. I just wanted to see in testfiles what items i'm getting in var files in the end of the process.
Both var files and directoryListing are IEnumerable<FTPListDetail> type.
The most important is to make the number 1 i mentioned and then to do number 2.Risa no.
What i mean is this. This is a screenshot of my ftp server at my host(ipage.com).
Now this is a screenshot of my program and you can see that in my program i have only the directories hello stats test but i don't have the files in the root: htaccess.config swp txt 1.txt 2.png....all this files i don't have it on my treeView.
What i want it to be is that on my program on the treeView i will also display the files like in my ftp server.
I see in my program only the directories and the files in the directories but i don't see the files on the root directory/node.
I need it to be like in my ftp server i need to see in my program the htaccess 1.txt 2.png and so on.
So what i wrote in my main question is that in the var files i see this files of the root directory i just don't know to add and display them in my treeView(my treeView is treeViewMS1).
I know i checked in my program in the method CreateDirectoryNode i see in the first iteration of the recursive that var files contain this root files i just dont know how to add and display them in my treeView.
On the next iterations when it does the recursive it's adding the directories hello stats test and the files in this directories but i need it to first add the root files. -
How can i redirect to with one button to different pages!
Hi All,
For any application, for the first time,if a new table exists then there will no data in that table.
based on this scenerio,in my application,i am handling apex validation staying that "you have no data. Please click here to go Reset symbol page.
when it redirects to Reset symbol i am providing a text box and with a button. Once there enter a symbol and click on button it will inert in that table and again redirects to Home page for say-39.
simillarly what are the functionality available in home page i had implemented same thing but only it differs page no for say-115.
In both the scenerio's i will be redircting reset Symbol page where there can insert a symbol explained in above scenerio case.
My problem is when i am throwing the error msg from page-39 i am redirecting to Reset symbol and when there enter symbol and click on button again i will be redirection t page -39 because the error had came from page-39.
If the same error comes from page-115 then also i will redirecting to same Reset Symbol where there will be entering symbol and click on button, in this case it should redirect to page-115 instead of page-39 because i have got error from page-115 but not from page-39.
How to handle the above scenerio, please help me out.
Thanks in advance,
Anoo.Hi Andy,
Thanks for your suggestion, it is working fine..But i am facing one problem in page 115, i have two regions and both regiosn have same name but only difference is items names.. when i had tried to rediect to page-115 the umwanted one regions is showing instead of expected region. It is getting failed here bec it is rediecting to differnet region.
Any suggestion on this!
Thanks,
Anoo.. -
How can I load a flat file using a different Work Station
Hi Gurus,
I'm having problems with loading Flat file in our Production Server when it comes to loading a file from another work station. The scenario is all the Info Packages needed are created in oour Dev Server. So the location of the flatfile is already define which is the developer's workstation. Now when the package is transported to the production server any changes to the package is not allowed inlcuding the location of the flatfile needed to be uploaded. Now my question is. is there a way that the location be changed in the production server without adding the package Z_BI because that will mean we can do changes in the production server. Thanks in Advance
- KitDirectly you can not change the info package settings. You need do change the status of Info package to changeable mode and then do necessary changes.
RSA1 => Click on truck symbol (Object changeability) => select info package => right click => click on Switch changeability.
Now do the changes to your Info Package.
With Regards,
Kishore. -
I have very little space left on the hard drive on my macbook, on my storage report it says "other" is taking up more than two thirds of the space on the hardrive. How can I identify what these files are?
Hello,
There is free software you can download that gives you a graphical image of what files are used on your hard drive. http://www.derlien.com/
This may help you clean down your hard drive for more space.
Best of luck -
How can I put the report generated by a program into a File?
Hi all,
How can I put the report generated by a program into a File?It can be in TXT format or excel format which ever is possible.
I need to export this file to memory,How can I do that??
Regards,
Shashank.Hello Shashank,
Please ignore my previous answer... Ofcourse it works...
There are several ways to do this...
two of them are
1. List -> Save -> File and press enter..
it will ask for the format, then path where to save it. Just give the path.
2. Using function module 'GUI_DOWNLOAD'.
I'm giving the example bellow which explains the usage of both GUI_UPLOAD and GUI_DOWNLOAD.
To do this... you need to have folder with name 'TEST' and a .txt file in it with name 'test'. And contents of it are :
TEST1 ,BOT
TEST2 ,BOT
TEST3 ,BUT
with spaces.
REPORT zssr_bdc .
DATA: BEGIN OF g_t_itab OCCURS 0,
matnr LIKE mara-matnr,
maktx LIKE makt-maktx,
END OF g_t_itab.
DATA: g_t_bdcdata TYPE TABLE OF bdcdata.
DATA: path TYPE string,
path1 type string.
path = 'C:\Documents and Settings\ssr3kor\Desktop\TEST\test.txt'.
path1 = 'C:\Documents and Settings\ssr3kor\Desktop\TEST\test1.txt'.
*contents of test.txt *
*TEST1 ,BOT *
*TEST2 ,BOT *
*TEST3 ,BUT *
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = path
TABLES
data_tab = g_t_itab.
LOOP AT g_t_itab.
WRITE:/1(18) g_t_itab-matnr, 20(40) g_t_itab-maktx.
ENDLOOP.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = path1
filetype = 'ASC'
TABLES
data_tab = g_t_itab.
Now you will get one .txt file with name 'TEST1.TXT' in the TEST folder.
<b>REWARD POINTS IF IT IS HELPFUL</b>
Regards
Sasidhar Reddy Matli -
How can we generate the reports in html or text file formats?
Hi,
Is there any package that can help in creating HTMLDB reports in .txt files or .html files? (Similar to TEXT_IO in Oracle Forms)
How can we generate the reports in html or text file formats from HTMLDB?
Thanks in Advance
RenjithHello all.
Bi Publisher is great, but has a very high price tag. It's even more expensive than Forms & Reports Services. We are considering APEX to replace Forms & Reports on the web, but the reporting limitations are still a problem.
I wonder if there is another option.
Thanks -
How can i add my report.rdf file in portal
Hi,
How can i add my report.rdf files in portal .. it's urgent and i have 30 report like to be executed based on user parameters....
can anybody help me please... thanks in advance....
vipin
nullhello,
check the whitepapers on "security walkthrough" at http://otn.oracle.com/products/reports
regards,
the oracle reports team -
How can I convert a report/ ALV in PDF format?
Can you tell me how can I convert a report or ALV in PDF format?
Regards,
Subhasishhi ,
check this..
*& Report ZSPOOLTOPDF *
*& Converts spool request into PDF document and emails it to *
*& recipicant. *
*& Execution *
*& This program must be run as a background job in-order for the write *
*& commands to create a Spool request rather than be displayed on *
*& screen *
REPORT zspooltopdf.
PARAMETER: p_email1 LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_sender LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_delspl AS CHECKBOX.
*DATA DECLARATION
DATA: gd_recsize TYPE i.
Spool IDs
TYPES: BEGIN OF t_tbtcp.
INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
wa_tbtcp TYPE t_tbtcp.
Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
gd_eventparm LIKE tbtcm-eventparm,
gd_external_program_active LIKE tbtcm-xpgactive,
gd_jobcount LIKE tbtcm-jobcount,
gd_jobname LIKE tbtcm-jobname,
gd_stepcount LIKE tbtcm-stepcount,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
gd_sender_type LIKE soextreci1-adr_typ,
gd_attachment_desc TYPE so_obj_nam,
gd_attachment_name TYPE so_obj_des.
Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
gd_destination LIKE rlgrap-filename,
gd_bytecount LIKE tst01-dsize,
gd_buffer TYPE string.
Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
c_no(1) TYPE c VALUE ' ',
c_device(4) TYPE c VALUE 'LOCL'.
*START-OF-SELECTION.
START-OF-SELECTION.
Write statement to represent report output. Spool request is created
if write statement is executed in background. This could also be an
ALV grid which would be converted to PDF without any extra effort
WRITE 'Hello World'.
new-page.
commit work.
new-page print off.
IF sy-batch EQ 'X'.
PERFORM get_job_details.
PERFORM obtain_spool_id.
Alternative way could be to submit another program and store spool
id into memory, will be stored in sy-spono.
*submit ZSPOOLTOPDF2
to sap-spool
spool parameters %_print
archive parameters %_print
without spool dynpro
and return.
Get spool id from program called above
IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
PERFORM convert_spool_to_pdf.
PERFORM process_email.
if p_delspl EQ 'X'.
PERFORM delete_spool.
endif.
IF sy-sysid = c_dev.
wait up to 5 seconds.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDIF.
ELSE.
SKIP.
WRITE:/ 'Program must be executed in background in-order for spool',
'request to be created.'.
ENDIF.
FORM obtain_spool_id *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
INTO TABLE it_tbtcp
WHERE jobname = gd_jobname
AND jobcount = gd_jobcount
AND stepcount = gd_stepcount
AND listident <> '0000000000'
ORDER BY jobname
jobcount
stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
message s004(zdd) with gd_spool_nr.
gd_spool_nr = wa_tbtcp-listident.
MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
MESSAGE s005(zdd).
ENDIF.
ENDFORM.
FORM get_job_details *
FORM get_job_details.
Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
IMPORTING
eventid = gd_eventid
eventparm = gd_eventparm
external_program_active = gd_external_program_active
jobcount = gd_jobcount
jobname = gd_jobname
stepcount = gd_stepcount
EXCEPTIONS
no_runtime_info = 1
OTHERS = 2.
ENDFORM.
FORM convert_spool_to_pdf *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
TRANSLATE it_pdf_output USING ' ~'.
CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
it_mess_att = gd_buffer.
APPEND it_mess_att.
SHIFT gd_buffer LEFT BY 255 PLACES.
IF gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM.
FORM process_email *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
perform send_email using p_email2.
ENDFORM.
FORM send_email *
--> p_email *
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
Default subject matter
gd_subject = 'Subject'.
gd_attachment_desc = 'Attachname'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod = 'Message Body text, line 1'.
APPEND it_mess_bod.
it_mess_bod = 'Message Body text, line 2...'.
APPEND it_mess_bod.
If no sender specified - default blank
IF p_sender EQ space.
gd_sender_type = space.
ELSE.
gd_sender_type = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_mess_bod
it_mess_att
using p_email
'Example .xls documnet attachment'
'PDF'
gd_attachment_name
gd_attachment_desc
p_sender
gd_sender_type
changing gd_error
gd_reciever.
ENDFORM.
FORM delete_spool *
FORM delete_spool.
DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
CHECK p_delspl <> c_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
spoolid = ld_spool_nr.
ENDFORM.
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM send_file_as_email_attachment tables it_message
it_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
t_contents like solisti1 occurs 0 with header line,
t_receivers like somlreci1 occurs 0 with header line,
t_attachment like solisti1 occurs 0 with header line,
t_object_header like solisti1 occurs 0 with header line,
w_cnt type i,
w_sent_all(1) type c,
w_doc_data like sodocchgi1.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
regards,
venkat. -
Urgent....How can i redirect to my jsp page from servlet in init() method..
How can i redirect to my jsp page from servlet in init() method..Becoz that servlet is calling while server startsup..so im writing some piece of code in init() method..after that i want to redirect to some jsp page ...is it possible?
using RequestDispatcher..its not possible..becoz
RequestDispatcher rd = sc.getRequestDispatcher("goto.jsp");
rd.foward(req,res);
Here the request and response are null objects..
So mi question can frame as how can i get request/response in servlet's init method()..Hi guys
did any one get a solution for this issue. calling a jsp in the startup of the servlet, i mean in the startup servlet. I do have a same req like i need to call a JSP which does some data reterival and calculations and i am putting the results in the cache. so in the jsp there in no output of HTML. when i use the URLConnection i am getting a error as below.
java.net.SocketException: Unexpected end of file from server
at sun.net.www.http.HttpClient.parseHTTPHeader(HttpClient.java:707)
at sun.net.www.http.HttpClient.parseHTTP(HttpClient.java:612)
at sun.net.www.http.HttpClient.parseHTTPHeader(HttpClient.java:705)
at sun.net.www.http.HttpClient.parseHTTP(HttpClient.java:612)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLCon
nection.java:519)
at com.toysrus.fns.alphablox.Startup.callJSP(Unknown Source)
at com.toysrus.fns.alphablox.Startup.init(Unknown Source)
at org.apache.tomcat.core.ServletWrapper.doInit(ServletWrapper.java:317)
so plz do let me know how to call a jsp in the start up of a servlet.
Thanks
Vidya -
How can I run the report for different input values at the same time?
Reports version: Report Builder 6.0.8.13.1
Oracle version: Oracle8i Enterprise Edition Release 8.1.7.0.0
I want to run the same report for different input parameter values and spool each o/p to different file and ftp to a server. For this, as a first step, I am spooling different input values in to a file, reading those values through a loop and calling the report for that input values. Each report run/execution is taking 15 minutes. Total report execution is taking approximately 4 hours (assuming 16 different input values) to complete. So I have to wait 4 hours to see ALL outputs.
I would like to run the report parallel for ALL the input values and I should be able to see the ALL outputs with in 15 or 16 minutes.
In my shell script, I added & symbol at the end of the report call to start/run the job in the background. Due to this the control passed to the next step after the report call. At this place I have an ftp command to send the output file to a different server and it is giving error some thing like o/p file is not available/created yet". This is due to the fact that report writer is NOT yet completely started/initiated or it is NOT completed the spooling.
How can I run the report at the same time for all the input values and save the time?
Thanks in advance.
Kishore.Increase the number of server engines running right now it seems there is only one engine running ,increase it to 4 or 6
and then atleast 4 or 6 reports will run simultaneously.
For FTPing the output add to your sript to check whether it is locked and if not then only try to ftp .
Also for more better functionality read the document (chapter 15 ) for 10g reports for its new fuinctionality.
http://download.oracle.com/docs/cd/B14099_17/bi.1012/b14048/toc.htm
Thanks
Subodh -
How can I print a report in JDev 11g TP4
I am using JDev 11g TP4 .. in ADF application how can I print a report?
Thank you
Sameh ShokryYou do file->print from your browser's menu I guess.
There is also this:
http://one-size-doesnt-fit-all.blogspot.com/2008/03/creating-printer-friendly-jdev-adf.html -
How can we put the report which is generated by the program into spool??
How can we put the report which is generated by the program into spool??
I had generated a file in Unix which had the report but now the requirement has changed.
Regards,
Shashank.Hi Shashank,
If the program is executed in the background and it has the write statement then the spool will automatically generated.
Reward points if useful.
Regards,
Atish -
How can I print to a file? Msg: "Could not open the file, access denied"
How can I print to a file? Printing itself works fine, but I get this error message when I select the "print to file" box.
Hi gag5212, the "Print pages to PDF" extension does not use the normal print dialog. Instead, right-click the page and look for its menu there, or you can add its button to one of your toolbars.
I'm surprised by your results with the other sites.
The http://www.primopdf.com/ page layout is completely whacky. The product was acquired by the NitroPDF people, but what is going on here? Probably best to ignore that one for now.
On http://www.pdfforge.org/ you should get something like the attached on the download page. I'm alarmed to hear you got something strange. Do you have any extensions that you don't recognize? You might be infected with something that redirects your downloads in some way. Although Norton is generally a solid product, you should consider some supplemental scans. This article lists tools that other Firefox users have found helpful: [[Troubleshoot Firefox issues caused by malware]]
Maybe you are looking for
-
Itouch calendar - how do i repeat an event every 3 weeks?
I've just bought an itouch. I previously had a palm tungsten. On the palm, I had the flexibility to repeat events on a particular day of the week every number of weeks/months. eg every 3rd Saturday of the month or the 20th of each month, every 3 week
-
How to get standard view or table for the standard inforsource
Hi all: According to business reqirement, we are going to use standard inforsource 0CO_OM_CCA_10, we need to know the standard view or table in order to corresponding DataSource? could you please tell me how to get the standard view or table o
-
Management of SonicMQ5.0.2 on Solaris(Non GUI)
Please provide me help regarding management of SonicMQ5.0.2 from console. (Admin.sh file was there in earlier versions but in this version i dont find anything from where i can manage SonicMQ) as i want to install it on a Solaris Machine. one file wi
-
I installed Maverick, now I can't open iPhotos v9.2.3. What can I do?
I installed Maverick, now I can't open iPhotos V9.2.3. What can I do?
-
I think I trashed my user folder in the /Users directory. Is this folder supposed to have the same content as my usernamer icon on my HD? If so, how do I recover... cause they are not the same now.