How can I Refresh the DashBords for every 5 minutes with latest data

Hi,
Here we are Using the DashBoards which are accessing the data from SSAS Data bases to the DashBoards.
From Dash Boards page, we have to refresh the Dash Boards for the latest Data for every 5 minutes.
can any body provide the solution for this.
Thanks,
Supraja.
SUPRAJA'S

Hi Tom,
sorry for late response.
i have Analysis services(AS) Data base. which is configured with ROLAP settings in SSAS.
we are showing this AS Database Information in Dash boards.
once we open the dash board, it will shows the latest information in dash boards obviously. 
but, Mean while if any changes occured in AS data base, if we want to get that changes in dash boards we have to refresh the dash board (OR) we have to close & reopen the same dash board.
apart from this if is there any other solutions technically,  Please suggest me.
Thanks,
SUPRAJA'S

Similar Messages

  • How can I make the iPhone beep every hour ?

    How can I make the iPhone beep every hour ?
    Just a beep not an alarm (alarms require an acknowledgement)

    I wanted this function as well and I just downloaded "BBClendar Free" and it works perfectly for this, better than an inexpensive digital watch!
    Just go to the Advanced section, enable the hourly beep and even set which hours (mine is 8 AM - 10 PM) and what minute of each hour it beeps on. Just be sure to leave the program open when you go on standby or it won't beep.
    As the App's description says, "Hourly Beep helps you to take a moment to rest in a busy day for every hour."
    Enjoy!

  • How can I decouple the pagination for a global region?

    I was having a delightful time using a common region defined on a global page when I determined that pagination setting was begin carried from one page to the next.  Arghhhh!  So for example, if I have paged to the second set (page) of rows (11-20) on Page 1 and then I go to Page 2, the second set (page) of rows (11-20) is displayed there.   If I go to a page which only has a first set of rows (1-10), I get the pagination error "Invalid set of rows requested, the source data of the report has been modified. Reset Pagination".  And when I click to reset, it just repeats the error.  [I suppose it tries to display the second set or rows (11-20) again -- which doesn't exist.  What's that saying about insanity?]  
    How can I decouple the pagination for a global region? I want it to operarate just as it would if it were not sharing a common region.  So if I'm looking at rows (11-20) on page 1, I can go to any other page beginning with rows 1-10 there.  Then return to page 1 where I left off with rows 11-20 displayed.  One solution is NOT to paginate but that's not my preferred solution.
    Howard

    Howard(...inTraining) wrote:
    I was having a delightful time using a common region defined on a global page when I determined that pagination setting was begin carried from one page to the next.  Arghhhh!  So for example, if I have paged to the second set (page) of rows (11-20) on Page 1 and then I go to Page 2, the second set (page) of rows (11-20) is displayed there.   If I go to a page which only has a first set of rows (1-10), I get the pagination error "Invalid set of rows requested, the source data of the report has been modified. Reset Pagination".
    The fact that there are different numbers of rows returned on different pages implies that the reports have some local page dependencies, so why try to use a global component? What's the actual requirement? How many pages does the report have to appear on? (Please say it is a report and not a tabular form...)
    How can I decouple the pagination for a global region? I want it to operarate just as it would if it were not sharing a common region.
    The point is that a global region is just that: a single region that happens to be displayed on multiple pages. It does not create multiple instances of a region on different pages. (Specifically, a region has a single region ID, and this is used to reference it whether it appears on one page or all of them. The region ID is used by the report for the purposes of AJAX refresh, pagination etc.)
    A similar situation was discussed a long time ago. I'm rather surprised that Scott regarded it as a bug: the fact that it doesn't seem to have been "fixed" or have a bug number attached may indicate that the others on the APEX team disagreed with him? I haven't tried the workaround he suggested, however I don't think it's likely to be prove a useful line of attack for your issue, as (1) it resets pagination rather than preserving it; and (2) it doesn't appear to be compatible with the AJAX PPR pagination used in more recent versions of APEX.
    I can't see any straightforward "solution" (largely because I don't think there's really a problem: the exhibited behaviour is exactly how I expect/want global regions to behave). Pagination processing is undocumented. The current 4.2 apex.widget.report.paginate JS method is specifically annotated as "for internal use only". Search the forum for custom pagination techniques. Messy looking hacks for IRs have previously been suggested.
    So if I'm looking at rows (11-20) on page 1, I can go to any other page beginning with rows 1-10 there.  Then return to page 1 where I left off with rows 11-20 displayed.  One solution is NOT to paginate but that's not my preferred solution.
    Assuming that there aren't too many pages involved, the other obvious option is to create unique regions on the required pages. You can achieve some level of reusability by creating SQL Query (PL/SQL function body returning SQL query) reports based on an external function so that there's only a single SQL source to be maintained.
    Explain the requirement in more detail. Pagination is not the only option for reducing the quantity of displayed information. Often it's better to display some of all of the data, rather than all of some of it...

  • How can I disable the Keychain for an application?

    How can I disable the Keychain for an application? A window pops up every time I open a page in Safari asking me for a password. I'm using a student laptop, so while I'm an administrator I lack access to a few things, such as the Keychain Access application. Is there any way to deal with this?

    It's possible you may be able to trick it by creating an Applications folder in your Home directory and moving Safari to it.
    I can't test this but it might work. The problem is that you would miss Safari updates, so you'd have to keep an eye out for them. Another solution may be to download another Safari and install in yourname/Applications.

  • ListOptions what event is called on refresh?how can i refresh the sessionB

    Hi everyone, i'm currently starting my studies on this platform ...and i'm now going trough some problems that i hope someone can help me out on them.
    I have a project that involves accessing a xml file , and i managed to put some random values of the file on a ListOptions for a listbox.Now i would like to know how can i refresh the session bean or refresh the listbox when i change something on the file?
    Thanks
    DMS

    Hi everyone, i'm currently starting my studies on this platform ...and i'm now going trough some problems that i hope someone can help me out on them.
    I have a project that involves accessing a xml file , and i managed to put some random values of the file on a ListOptions for a listbox.Now i would like to know how can i refresh the session bean or refresh the listbox when i change something on the file?
    Thanks
    DMS

  • How can i compute the distance between every two strias

    how can i compute the distance between every two strias?The distances between every two strias in an image are almost equal .I have a picture for you in the accessory.there are many trias in all kinds of orientation in an image.fistly,i should find the most consious area,because it is simple to compute . Secondly,To improve precision,i should compute the distance of a group of trias,then conpute its average value.i dont know how to compute .pls teach me,thanks very much!
    Attachments:
    11.jpg ‏12 KB

    there is a typical image.
    Attachments:
    21.jpg ‏23 KB

  • How can I display the range for LastFullMonth in the header of a report

    How can I display the month for LastFullMonth in the header of a report run in the past so that a report that ran sept 1 2009 selecting data for LastFullMonth (august 2009)  displays sept 2009 in the header even if there is no data selected by the report?

    Good,
    Sometimes I answer these questions and completly miss it....
    ( lack of understanding on my part )   

  • How can we specify the Mailbox for Notes?

    In Mail.app, how can we specify the Mailbox for Notes (where the new notes will be resided)? It is now 'On My Mac'. I wish to change to my IMAP Mailbox so it sync with my iPhone by just checking email (not by syncing on iTunes).
    Thanks in advance.
    Message was edited by: Ekapon

    You could use the DecimalFormat or NumberFormat to do the job.
    double number 1234.567;
    DecimalForamt df = new DecimalFormat("###.##");
    String s = df.format(number);or
    double number 1234.567;
    NumberFormat nf = NumberFormat.getNumberInstance();
    nf.setMaximumFractionDigits(2);
    /* if needed.
       nf.setMaximumIntegerDigits(value);
       nf.setMinimumFractionDigits(value);
       nf.setMinimumIntegerDigits(value); */
    String s = nf.format(number);I didn't test the codes but they should work. For more information, please consult the documentations.

  • I no longer want to merge my work laptop with my icloud account on other devices.  How can I change the setting for the laptop?

    I accidentally agreed to set up my work laptop icloud account to merge with my other devices and want to keep the work information separate.  How can I change the setting for the PC at work?

    Sign out of iCloud.

  • How can I change the password for the USER in SAP.

    How can I change the password for the USER in SAP?
    also I want to change the Language and  date Format b/c it's displaying in German language..

    Hi,
    Assuming that User has already his/her user-id and password, and now he/ she wants to change it.
    select the client and provide Log-in credentials. Now, instead of 'ENTER' there is one Tab: 'New Password' (up, left hand). Click it.
    Now, system will ask for new password to change.
    If you are asking from Basis point of view, then T.code: SU01 - User Maintenance.
    Enter User's id and Click Change icon.
    It will lead to Page: Maintain User.
    Here, Select tab: Logon Data
    There is a Sub-Tab: Password.
    Here, key-in change password and SAVE.
    For Language and Date format, contact your Basis-Personnel.
    Best regards,
    Amit

  • Hi, how can i break the value for a row and column once i have converted the image to the array?????​??

    Hi, I would like to know how can i break the value for a row and column once i have converted the image to the array. I wanted to make some modification on the element of the array at a certain position. how can i do that?
    At the moment (as per attachhment), the value of the new row and column will be inserted by the user. But now, I want to do some coding that will automatically insert the new value of the row and the column ( I will use the formula node for the programming). But the question now, I don't know how to split the row and the column. Is it the value of i in the 'for loop'? I've  tried to link the 'i' to the input of the 'replace subset array icon' , but i'm unable to do it as i got some error.
    Please help me!
    For your information, I'm using LABView 7.0.

    Hi,
    Thanks for your reply.Sorry for the confusion.
    I manage to change the array element by changing the row and column value. But, what i want is to allow the program to change the array element at a specified row and column value, where the new value is generated automatically by the program.
    Atatched is the diagram. I've detailed out the program . you may refer to the comments in the formula node. There are 2 arrays going into the loop. If a >3, then the program will switch to b, where if b =0, then the program will check on the value of the next element which is in the same row with b but in the next column. But if b =45, another set of checking will be done at a dufferent value of row and column.
    I hope that I have made the problem clear. Sorry if it is still confusing.
    Hope you can help me. Thank you!!!!
    Attachments:
    arrayrowncolumn2.JPG ‏64 KB

  • I have installed Itunes on my laptop. However, the apple store opens in German language. I need it in English. How can i change the language for istore through the itunes?

    I have installed Itunes on my laptop. However, the apple store opens in German language. I need it in English. How can i change the language for istore through the itunes?

    Go to the bottom of the page, click the flag, then select your country.

  • How can we do the validation for non visible records in table control.

    Hi Experts,
      I have a table control which displays list of material details. I have a button to upload the material details from excel file to table control directly. I have to validate all the customers which are exist in the table. But my item (Material) table control displays only 5 rows i.e only 5 entries are visible in module pool screen. The validation is done for 5 records only in PAI event, but i need to do validation for rest of the records too (Which are not visible on items table), if validation fails then needs to display error message.
      How can we do the validation for non visible records in table control.
    Regards,
    Bujji

    Hi,
    try validating material before displaying it in table control...'
    Rgds/Abhhi

  • How can we write the code for opening the command prompt and closing the

    how can we write the code in java for opening the command prompt and closing the cmd prompt from eclipse (cmd prompt should close when click on the turminate button in eclipse)

    rakeshsikha wrote:
    how can we write the code for opening the command prompt and closing theBy typing in Eclipse (which you seemingly have)?

  • How can i change the font for a theme in iDVD.

    how can i change the font for a theme in iDVD. For example; the text of the rotation theme in the background of the movie. i want to change the font of the rotating text there. How do i do this?

    Have a look at this: http://hints.macworld.com/article.php?story=20080130180258257

Maybe you are looking for