How can I reinstall Bluetooth drivers after loading windows 7 64 bit version on my 2010 iMac?

I have just uninstalled windows 7 32 bit version which I have been using for ages and upgraded to the 64 bit version. I did this from the windows partition in my bootcamp divided hard drive. I then reinstalled the drivers using the application DVD which came with my machine but the Bluetooth driver is missing. One thought I have is whether I would be able to use the driver DVD which came with my 2011 MacBook Air (which has been running fine on windows 64bit version since I bought it)
Would this work or any other ideas?

moirl wrote:
5. I can not get anything off the Blackberry (photos etc.).
As was stated above:
1. Go to Options >> Media Card (or Memory)
(some themes or BlackBerrys may call this "Settings >> Media Card")
2. Check the following settings (if they are not listed this way, then change to reflect the following:
a) Media Card Support: On
b) Mass Storage Mode Support: On
c) Auto Enable Mass Storage: Yes
3. Save the settings and exit
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

How can I reinstall Photoshop CS6l after system restore

I downloaded and installed the trial version of CS6 a few days ago and everything was working wonderfully. Yesterday, some adware found its way through my firewall and installed itself on my system. The only restore point I had available predated the CS6 installation, and after the system recovered, PhotoShop was gone. I attempted to install it again to continue the trial, but got an error that directed me to a site that is no longer maintained by Adobe. How can I fix this? I'm sure the time limit on the trial hasn't stopped counting down, but I'm unable to install and check out the software. Any advice would be greatly appreciated!
Sciguy77

you're probably out of luck and cannot resume your trial.
however, you can download a trial and test your luck,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

How can I partition internal HDD after installing Windows 7 Professional via Boot Camp 4.0?

I recently purchased MacBook Pro 13" (Late 2011) model with OS X v10.7.2 Lion installed. I've upgraded to OS X v10.7.3 Lion and updated all other software.
I require Windows 7 for some Windows based softwares that do not support Mac OS X. Therefore, used Boot Camp 4.0 to install Windows 7 and then tried partitioning single internal HDD to have 3 partitions (4 total including BOOTCAMP partition). Disk Utility created a 648.5MB partition and then I was able to create 3 other partitions of custom sizes. After applying these changes, I got an error message that said selected volume size is too small. I resized this 648.5MB partion to a custom size and had total 4 partitions, including BOOTCAMP.
After reapplying these changes, BOOTCAMP partition was removed and I was left with only 3 partitions and empty space.
I've tried several different ways to partition the disk, all in vein. Is there a way I can partition my single internal HDD after installing Windows 7 Professional via Boot Camp 4.0?

You can't do what you want with GUI utilities, which will only allow a total of 4 partitions due to the limitation of MBR needed to support Windows. Those four partitions: EFI System (hidden), Mac OS, Recovery HD (hidden), Windows. So with Lion, you only get two visible partitions if you're going to use Windows with BootCamp. You can't make anymore with the included graphical tools.
If you need more partitions you'll need to use something like GPT fdisk (gdisk) to create the partitions in the GPT first. Then add the Windows partition only to the MBR and flag it as bootable. gdisk can be googled and downloaded for Mac OS X off sourceforge. It is not a GUI tool.
You should read this:
http://www.rodsbooks.com/gdisk/
And this:
http://www.rodsbooks.com/gdisk/hybrid.html

How can i reinstalling pdf printer after acrobat XI evaluation installation ?

Hi ,
Sorry for my bad english ....
Having a lot of problem with acrobat 8 pro (unable to desinstall/reinstall), i fanally decides to install the evaluation version acrobat XI .
Now i can open my pdf files and also save as pdf files my office files but i can't directely print on my adobe pdf printer ( i can't see it on my printers list).
I 've tried to reinstall this printer (new port) but it doesn't work .
Doesn't anybody have a (good) idea ?
Note : the 'save as' is very long (almost 3 mns for a file ).....
Thanks .
Hervé

Moving this discussion to the Creating, Editing, & Exporting PDFs forum.

HT1338 how can I reinstall the email application as well as the original applications to IMac

I was moving things around and all, and every application disappeared from the "Dock". However, a "?" sing appears on every spot of where there were an application, if I run the mouse over the "?" symbol the name of an application appears on the location where it was previously posted with its Icon. I have reinstalled Moutain Lion, and the Disk. I cannot find any applications on the "application folder/tab", I can not retrieve it from an all files search, I cannot open "time capsule"

Double-click on your hard drive's Desktop icon. It will be shown in the Finder window that opens. If it does not then you have removed it or moved it. Search for it otherwise, you need to reinstall OS X.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Next time don't go moving things around when you don't know what you are doing.

While installing Lion my Bluetooth module disappeared. How can I reinstall it?

While installing Lion my Bluetooth module disappeared. How can I reinstall it?

You ought to get a dialog asking to install the first time you run an app that needs it
Details here:
http://www.macworld.com/article/1167855/installing_mountain_lion_what_you_need_t o_know.html
The relevant bit is this:
Note that the first time you try to load a webpage or run an app that requires Java, Mountain Lion will prompt you to download and install the Java runtime, even if you upgraded from Snow Leopard or Lion and you’d previously installed Java. This is normal—you shouldn’t worry that installing Mountain Lion somehow “lost” any of your data or apps.
Or you can go to the Apple Downloads page and search for Java

How can i reinstall itunes 10.5.2 on windows xp, after i deleted the older version? help please!

it's been painfull not to get the answer for this issue, since i did update every single apple features that works with my pc windows xp, thi's the 1rst time that i have this problem! anyone out there can help pleeeaasseee?????

"how can i reinstall itunes 10.5.2 on windows xp, after i deleted the older version?"
Go to apple.com/itunes/download
Download the current version.
Install it.
When installing, are specific errors being generated?

How Can you reinstall Photoshop Elements12 to a computer that its was there but loss it after installing windows 8.1

How Can you reinstall Photoshop Elements12 to a computer that its was there but loss it after installing windows 8.1

Reinstalling Mavericks depends on several factors:
if you erased your recovery partition
what OS originally came on your Mac.
I'll assume you don't have a backup available that you made before your mishap, because you didn't mention it.
That's really the take home message here: have a backup!
If you still have your recovery partition:
boot into the recovery partition (command R at restart)
use the recovery partition to reinstall Mavericks. see: OS X: About OS X Recovery
if you do not still have your recovery partition, then it depends on whether your Mac originally came with installer disks or not.
If it originally came with installer disks, you would boot from the installer disks, erase your HD, and then reinstall the OS that is on the installer disks, and then upgrade as necessary until you get to Mavericks.
If your mac did not originally come with installer disks, but you managed to erase your recovery partition, then you can try to boot into internet recovery (option-command-R at restart), and use internet recovery to erase your HD and reinstall the OS that originally came with your computer, and then upgrade to Mavericks if you need to. See: Hands on with Mountain Lion's OS X Recovery and Internet Recovery | Macworld
(the reference refers to ML but it applies just as well to Mavericks).

The office suite shows up twice on the bottom--I need to uninstall and reinstall it but now it still shows up twice; documents act funky and load again when I pick the other icon--how can I reinstall completely so just one office suite in indeed installe

I put office for MAC on my macbook air--it somehow shows up twice and documents load out there depending on which one you pick. I need to get all of the office installiations off and reinstall but it appears to leave one out there. When I go to applications I cannot see it but I can see it on the icon line on the bottom of the screen. How can I reinstall Office for Mac so there is only one installation on my computer ?

Unfortunately the information given to you by r8er is incorrect, deleting the Office folder from Applications only partially uninstalls Office.
Here are the correct uninstallation instructions for you.
And the icons at the bottom are just shortcuts.

How can i redownload snow leopard after reinstalling an old version of leopard from disks

Hi;
how can i redownload snow leopard after reinstalling an old version of leopard from disks
I have a mobileme account and an icloud account
Marcia

If you have Leopard installed, you can't download anything to get to Snow Leopard.
In order to do that you must have a Snow Leopard DVD.
Allan

Hi, how can i reinstall iOS 5 In My iPad after install iOS 6?

Hi, how can i reinstall iOS 5 In My iPad after install iOS 6?

You can't. It's not supported by Apple.

After iOS 6 upgrade, the YouTube app is missing. How can I reinstall it?

After iOS 6 upgrade, the YouTube app disappear. I have already checked Restrictions but it is disabled. How can I reinstall it?

No YouTube in IOS 6.
In the mean time you can use the iPhone version of YouTube or Jasmine
http://itunes.apple.com/sg/app/youtube/id544007664?mt=8
https://itunes.apple.com/sg/app/jasmine-youtube-client/id554937050?mt=8

How can I reinstall Mountain Lion (already bought before) after I restore my MacBook unibody (restores it to snow leopard)?

Originally I had upgraded my MacBook unibody to mountain and used time machine to back up my data. I then wanted to restore my MacBook so I did but it restored my MacBook to snow leopard. After restoring to an old time machine backup some of the apps aren't compatible because they require mountain lion but my system got restored to snow leopard. How can I reinstall my already purchased mountain lion if snow leopard doesn't have an App Store?

10.6 Snow Leopard will get the App Store when you update it to 10.6.8. Download the 10.6.8 combo updater to bring it up to 10.6.8. http://support.apple.com/kb/DL1399

HOW can I make a .SWF default load after its first load?

When you have the SAME parent API on every page of an (X)HTML website, can a .SWF tell itself to load from a default position when a website user navigates to different HTML pages?
Here's my parent API as it stands:
http://www.playingthepoet.com/
HOW can you tell the .SWF to load from a default position once the .SWF has loaded a first time? AND from any page of the website, not just the Home page? This is an advanced .SWF networking issue. And I'm not sure if the best solution is a Javascript of if there's a direct AS3 programming solution.
The blurs and fade-ins are a bunch of timer variables and timer event methods timer event listeners. I want that intro ONLY ONCE. And NOT every time a user changes HTML pages. Please help, and MANY thanks for your time!!
NT

Hi ,
You can set a variable say "count" on stage composition ready -
sym.setVariable("count" , 0);
On stage click , you keep checking the value of this variable -
if(sym.getVariable("count") == 5)
sym.$("Symbol_2").show();
//Here "Symbol_2" is the next button that you want to appear on screen(which is initially invisible) when the symbol_1 is clicked say 5 times.
Now, on click of a button , you keep updating the variable count -
var countnew = sym.getVariable("count");
countnew = countnew+1;
sym.setVariable("count" , countnew);
Attaching the sample for reference.
Thanks and Regards,
Sudeshna Sarkar

How can I reinstall Lion after putting in a new hard drive?

Hi, I recently had a new hard drive put on my imac27. When I rebooted it I noticed that the Apple store had set it back to Snow Leapard. How can I reinstall Lion without making a new purchase, Thanks.

Log into the Mac App Store with your original Apple ID. The redownload is free.
(68116)

How can I reinstall Bluetooth drivers after loading windows 7 64 bit version on my 2010 iMac?

Similar Messages

Maybe you are looking for