How can I release DHCP?

I have verizon FIOS and in order to switch routers (because my VPN is STILL not working, so I run a test, switch back to linksys, etc) I have to release the DHCP with Verizon FIOS. They retain the MAC address and if don't release, then the other router cannot get an IP from them.
The Linksys has a "Release DHCP" button. I can click that, plug into the Airport and all is well.
However Apple, in their infinite wisdom to make a hard task easy, namely neworking, neglected to add a "Release DHCP" button. So once my Aiport grabs an IP, and I have run all of my tests and need to go back to m Linksys, I'm bricked.
I have to call Verizon and ask them to release it.
ugh. Is there any hidden trick to getting th airport extreme N to release the DHCP it got from Verizon?

The Linksys (my old WRT54GS model did) has a 'clone MAC address' feature. Set that to be the *same as the MAC address of your AirPort Extreme Base Station* and then when you switch between the two the Verizon equipment won't know the difference. Should work.
Just be sure not to leave the Linksys at same MAC address as the AEBS if you put both on the same LAN or you'll have problems

Similar Messages

How can i release text from a text box?

How can I release text from a text box? I want the shape of the text box without the text in it.

So all you need is to make a line around the text?
For this you don't need to release the text box from the text. Just apply a stroke to it.

How can I found out the No. of Psocess running and How can I Release them

Dear experts,
How can I found out the No. of Psocess running and How can I Release them.
I have 1GB RAM with oracle 10G. and please tell me How many processes can run with this RAM.

>How can I found out the No. of Psocess running
well, that depends on where you are ? if you are on windows then task manager will tell you what all processes are running. if you are on unix then ps -ef will tell you about all the processes running on a particular machine
How can I Release them.
what do you exactly mean by Release ? if you mean "end" that again has 2 scenarios, first that process ends by itself (ie after completing its job), another can be killing the process , that again will depend upon operating system. in windows you can kill a process from task manager itself, in unix you can use kill -9 PID to kill a process.
How many processes can run with this RAM.
loads of other details required before one can answer this question.no of processes in a very simple manner will depend how much memory is available and how much a process is eating.
Sidhu

How can we release the locked objects..

Hi,
I have created some objects such as pages and iviews in the portal. If i edited any of the object, then when next time when i access the object, I am hgetting a message as object is locked by admin, you canot edit it. Infact, I have logged in as admin.
How can we release the lock of objects?
Your help and suggestins solicited...
Best regards,
Sudhesh...

Login as the Portal Administrator.
Go to System Administration > Monitoring ->Detailed navigation -> Object Locking
Here you can find all the objects that are in locked state.
Now to unlock, tick mark the object that you want to work with & click on the "Unlock" Button.

How Can I Release sessions if these are idle long time Automatically.

Dear Experts,
How Can I Release sessions if these are idle long time Automatically based on some time frame..
So that session memory will be free and when i go to reconnect the session then we will have enough memory for our transaction processing.
I am asking this question because, In my case (Web Load Testing) after completion the processing this parameter still showing 86% Usage.
so How Can I release it.

Change value of IDLE_TIME in profile or better create new profile with less IDLE_TIME and assign to users.
IDLE_TIME Allowed idle time before user is disconnected (minutes)
Below is example if user is idle for 20 min , he/she will disconnect
ALTER PROFILE developer LIMIT idle_time 20;
Cheer,
Virag Sharma

How can I make DHCP Service automatically assign IP addresses?

We decided on using OS X Server's DHCP service rather than depend on our router to dole out IPs. Here's the size and shape of our local subnet:
Range: 192.168.0.0 to 192.168.7.255
Mask: 255.255.248.0
Router: 192.168.1.1
DNS: ....etc...
We're trying to have the DHCP block managed as 192.168.2.0 through 192.168.2.255. Maybe I'm missing something, but shouldn't DHCP automatiScally assign IPs in that range every time someone plugs in a computer? Right now we're having to enter MAC + IP static maps manually into Server Admin, which is a major pain. How can we fix that so it becomes automatic?
Here's how DHCP service is set on our quad-Ethernet Xserve Xeon. en0 / en1 / en2 / en3 are all set up the same, but only en0 is checked:
GENERAL:
Subnet Name: Our LAN (en0)
Starting IP Address: 192.168.2.0
Ending IP Address: 192.168.2.255
Subnet Mask: 255.255.248.0
Network Interface: en0
Router: 192.168.1.1
Lease Time: 4 hours
DNS Servers:
192.168.1.100.... etc.
Default Search Domain: ourdomain.private
LDAP:
Server Name: (blank)
Search Base: (blank)
Port: (Leave blank to use the default port)
[ ] LDAP over SSL
URL:
WINS:
WINS/NBNS Primary Server: 10.0.1.20
WINS/NBNS Secondary Server: 10.0.1.21
NBDD Server: 1.0.1.22
NBT Node Type: Not Set
NetBIOS Scope ID: (blank)
I'm stuck.... I thought all I'd have to do is define a suitable range, like the 256 addresses in the middle of our DHCP block, but it's not enough. Your help is certainly appreciated.
- Bert

This morning I stumbled onto the solution (at least a partial solution). I noticed in /var/log/system.log that there were warnings to the effect of "Hey -- you've got disabled DHCP ports that have conflicting ranges with your enabled DHCP port." Previously, I hadn't thought this was a major error, but when I deleted the three disabled ports from DHCP (en1, en2, and en3) and restarted DHCP then everything started working correctly. Hosts that were previously not getting IP addresses assigned because they weren't listed in Static Maps are now getting addresses.
The log entries looked basically like this:
Apr 19 09:54:38 myserver servermgrd[50]: servermgr_dhcp:bootp config:Error:Subnets 'My LAN (en2)' and 'My LAN (en0)' have overlapping ranges: '1\
92.168.2.0-192.168.2.255' overlaps '192.168.2.0-192.168.2.255'
Apr 19 09:54:38 myserver servermgrd[50]: servermgr_dhcp:bootp config:Error:Subnets 'My LAN (en2)' and 'My LAN (en3)' have overlapping ranges: '1\
92.168.2.0-192.168.2.255' overlaps '192.168.2.0-192.168.2.255' - 'My LAN (en3)' is not active
Apr 19 09:54:38 myserver servermgrd[50]: servermgr_dhcp:bootp config:Error:Subnets 'My LAN (en2)' and 'My LAN (en1)' have overlapping ranges: '1\
92.168.2.0-192.168.2.255' overlaps '192.168.2.0-192.168.2.255' - 'My LAN (en1)' is not active
Apr 19 09:54:38 myserver servermgrd[50]: servermgr_dhcp:bootp config:Error:Subnets 'My LAN (en0)' and 'My LAN (en2)' have overlapping ranges: '1\
92.168.2.0-192.168.2.255' overlaps '192.168.2.0-192.168.2.255' - 'My LAN (en2)' is not active
Apr 19 09:54:38 myserver servermgrd[50]: servermgr_dhcp:bootp config:Error:Subnets 'My LAN (en0)' and 'My LAN (en3)' have overlapping ranges: '1\
92.168.2.0-192.168.2.255' overlaps '192.168.2.0-192.168.2.255' - 'My LAN (en3)' is not active
: and so on
The next problem I need to work through is why there's huge amounts of DHCP-related traffic in the logs. It's clogging up with stuff like this:
Apr 19 10:33:40 fannxfile bootpd[54475]: DHCP DISCOVER [en3]: 1,0:e:8:eb:47:90 <SipuraSPA>
Apr 19 10:33:40 fannxfile bootpd[54475]: replying to 192.168.2.44
Apr 19 10:33:40 fannxfile bootpd[54475]: OFFER sent <no hostname> 192.168.2.44 pktsize 303
Apr 19 10:33:40 fannxfile bootpd[54475]: service time 0.000404 seconds
Apr 19 10:33:40 fannxfile bootpd[54475]: DHCP DISCOVER [en0]: 1,0:e:8:eb:47:90 <SipuraSPA>
Apr 19 10:33:40 fannxfile bootpd[54475]: replying to 192.168.2.44
Apr 19 10:33:40 fannxfile bootpd[54475]: OFFER sent <no hostname> 192.168.2.44 pktsize 303
Apr 19 10:33:40 fannxfile bootpd[54475]: service time 0.000385 seconds
Apr 19 10:33:40 fannxfile bootpd[54475]: DHCP DISCOVER [en1]: 1,0:e:8:eb:47:90 <SipuraSPA>
Apr 19 10:33:40 fannxfile bootpd[54475]: replying to 192.168.2.44
Apr 19 10:33:40 fannxfile bootpd[54475]: OFFER sent <no hostname> 192.168.2.44 pktsize 303
Apr 19 10:33:40 fannxfile bootpd[54475]: service time 0.000363 seconds
Apr 19 10:33:40 fannxfile bootpd[54475]: DHCP REQUEST [en2]: 1,0:e:8:eb:47:90 <SipuraSPA>
Apr 19 10:33:40 fannxfile bootpd[54475]: replying to 192.168.2.44
Apr 19 10:33:40 fannxfile bootpd[54475]: ACK sent <no hostname> 192.168.2.44 pktsize 303
Apr 19 10:33:40 fannxfile bootpd[54475]: service time 0.000597 seconds
Apr 19 10:33:40 fannxfile bootpd[54475]: DHCP REQUEST [en3]: 1,0:e:8:eb:47:90 <SipuraSPA>
Apr 19 10:33:40 fannxfile bootpd[54475]: service time 0.000103 seconds
Apr 19 10:33:40 fannxfile bootpd[54475]: DHCP REQUEST [en0]: 1,0:e:8:eb:47:90 <SipuraSPA>
Apr 19 10:33:40 fannxfile bootpd[54475]: service time 0.000298 seconds
Apr 19 10:33:40 fannxfile bootpd[54475]: DHCP REQUEST [en1]: 1,0:e:8:eb:47:90 <SipuraSPA>
Apr 19 10:33:40 fannxfile bootpd[54475]: service time 0.000153 seconds
Apr 19 10:33:40 fannxfile bootpd[54475]: DHCP REQUEST [en2]: 1,0:e:8:eb:47:90 <SipuraSPA>
Apr 19 10:33:40 fannxfile bootpd[54475]: service time 0.000134 seconds
Apr 19 10:33:40 fannxfile bootpd[54475]: DHCP REQUEST [en3]: 1,0:e:8:eb:47:90 <SipuraSPA>
Apr 19 10:33:40 fannxfile bootpd[54475]: service time 0.000139 seconds
Apr 19 10:33:40 fannxfile bootpd[54475]: DHCP REQUEST [en0]: 1,0:e:8:eb:47:90 <SipuraSPA>
Apr 19 10:33:40 fannxfile bootpd[54475]: service time 0.000125 seconds
Apr 19 10:33:40 fannxfile bootpd[54475]: DHCP REQUEST [en1]: 1,0:e:8:eb:47:90 <SipuraSPA>
Apr 19 10:33:40 fannxfile bootpd[54475]: service time 0.000174 seconds
This is happening REALLY fast. Every second there's a block of log entries like the above. I don't get it because I've set the lease times to 4 hours. I'll reset the leases back to 12 hours, but I don't understand what's causing the rapid fire log entries.
Perhaps the smart thing to do at this point is to reboot the server.
To answer some of your specific questions:
Q: Have you tried specifying the range as 192.168.0.1 - 192.168.7.254 instead? Please don't take this the wrong way but is the service actually running?
A: Yes, definitely up and running. Hosts that are in the static map were getting addresses. After deleting the three disabled Ethernet ports with conflicting ranges, I'm also seeing hosts that have not been entered into static maps appearing with dynamic IP addresses, which is what we wanted.
Regarding the suggestion to set the network range to 192.168.0.1 - 192.168.7.254: That's the range the way it was originally set, but I thought what the range was supposed to be was the smaller block of addresses you wanted DHCP to draw from out of your total subnet. I may be wrong, but doesn't DHCP service already know your total network size from the network mask? [255.255.248.0 in our case] This implies that our subnet ranges from 192.168.0.0 to 192.168.7.255 (including base and broadcast addresses at both ends).
My thought was that the "Starting IIP Address" and "Ending IP Address" wanted to be the range of addresses in that that I wanted to use as a pool for DHCP. Hence 192.168.2.0 through 192.168.2.255. We have devices with static IP addresses on our network (servers, printers, and our VoIP phone system, mostly) on 192.168.0.xxx, 192.168.1.xxx and 192.168.3.xxx, and if DHCP doubly assigns addresses in these ranges to our workstations, then we're in big trouble.
Q: sudo serveradmin fullstatus dhcp
A: ...that produces the following output now following deletion of the DHCP ports with conflicting ranges:
fannxfile:log root# serveradmin fullstatus dhcp
dhcp:setStateVersion = 1
dhcp:servicePortsAreRestricted = "NO"
dhcp:numConfiguredStaticMaps = 43
dhcp:dhcpLeasesArray:arrayindex:0:timeLeft = 12201
dhcp:dhcpLeasesArray:arrayindex:0:clientID = ""
dhcp:dhcpLeasesArray:arrayindex:0:computerName = ""
dhcp:dhcpLeasesArray:arrayindex:0:macAddress = "00:1b:63:17:a3:bd"
dhcp:dhcpLeasesArray:arrayindex:0:ipAddress = "192.168.2.21"
dhcp:dhcpLeasesArray:arrayindex:1:timeLeft = 12168
dhcp:dhcpLeasesArray:arrayindex:1:clientID = ""
dhcp:dhcpLeasesArray:arrayindex:1:computerName = ""
dhcp:dhcpLeasesArray:arrayindex:1:macAddress = "00:1b:63:17:a3:bd"
dhcp:dhcpLeasesArray:arrayindex:1:ipAddress = "192.168.2.9"
dhcp:state = "RUNNING"
dhcp:logPaths:systemLog = "/var/log/system.log"
dhcp:backendVersion = "10.5"
dhcp:timeOfModification = "2009-04-19 10:05:46 -0700"
dhcp:numDHCPActiveClients = 2
dhcp:numDHCPLeases = 2
dhcp:timeOfSnapShot = "2009-04-19 10:43:09 -0700"
dhcp:timeServiceStarted = "2009-04-19 10:05:46 -0700"
dhcp:readWriteSettingsVersion = 1
dhcp:servicePortsRestrictionInfo = emptyarray
-- Bert Sierra

How can we release the lock

hi
my sap user has been locked, anybody can sugges me how can i unlock my user
rajini

hi,
you can use this and try "BAPI_USER_UNLOCK".
hope it helps.
thanks
syed

False error message as "paper jam" on CP1215 Color Laser Printer. How can I release it?

On Color Laser Printer CP1215 the False Paper Jam warning message is continuously on.
How can I erase it?

Thank you for visiting the HP Support Forums.
Just a reminder that this is a peer-to-peer community of HP customers, and not a venue to contact HP directly. Most of the users here are consumers like yourself who are offering solutions because they like to help others, and any HP employees you see are here on their own capacity and not representing the company.
If you have additional or direct feedback for HP about their products or services, or questions about repair, you can use the link below for contact information.
http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
If you have other questions and concerns about using the forum, please feel free to send me a private message.
semads wrote:
There was a time not so long ago that the info one received from HP's tech support et al was helpful and relevant, Unfortunately, those days have become rare. This reply is evidence of that. It's almost as if you have a program that scans user's submissions for certain keywords and then posts a reply with a link to a solution that may apply based on the keyword. In the case of the CP1215, the paper jam error is FALSE!!! No one who is complaining about this issue has a paper jam!! You can post replies with your condescending link to your Paper Jam Resolution site all day long and it will NEVER rectify the situation hundreds of people are having with this printer! In my case, I have 2 printers with this exact same issue. My CP1215 as well as my 2200D both are completely useless due to a false "Paper Jam" message that won't allow the printer to print. Neither printer has printed more than 500 pages!!!!!
Thank you HP for transitioning from one of the best tech companies in the world to just another company that has no time or money to be concerned with the problems its customers are having with one of their products. I used to be proud that I owned HP printers if for no other reason than the quality of the products and the reputation - I even recommended your products to everyone who would listen. Not any more. Maybe one day one of the revolving-door CEO's will do a Google search for problems customers are having with your products and will see that the company's status quo isn't acceptable and do something to fix the problems internally that are affecting so many of your customers and also help the thousands of individuals who have basically hit a wall with regard to finding any kind of solution to the problems they have with their printers.
OrnahP
HP Support Forums Moderator
Clicking the "Kudos Star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking "Accept as Solution" to help other members in the future!
Rules of Participation

I got creative cloud and want to sell lightroom 5. How can I release the license?

I don't know how to do this, but I want to make sure that the new buyer can use the software properly. I bought this and a month later, uninstalled it when I upgraded to creative cloud. I don't know how to release the license so I can sell this software to a third party. Maybe that isn't needed, but I need to make sure they can license it on their computer. Please help since I don't know how to find out and my buyer is waiting to hear. Thanks so much!
-Marit

I was just about to ask the same question.
Any clarification would be much appreciated.
Edit: In my case, I haven't uninstalled the box version of LR5, I just let the CC App install the LR CC version (i.e. just changed the license type to CC)according to this official FAQ: http://helpx.adobe.com/lightroom/kb/lightroom-creative-cloud-faq.html#id_81567

How can I release Focus?

Ok..maybe it's a dummy question, but I can't figure out an easy way to release the focus from my node and traverse it to the next node in the scene.
I have node inheriting from Region that requests the focus...I want it to release the focus when the user presses 'Tab'
Node provides a requestFocus() , but there's no releaseFocus()?
...I guess another option is to create a custom Behavior implementation and to call traverseNext() but that is too complicated for such a trivial task.
What would be the easier way to release the focus from my Node on pressing the 'Tab' key?

You need to call requestFocus() on the node you want to tab to.
In the future there may be an API that can help you with is, but afaik it is not currently accessible.

My iphone is stuck because of the icloud how can I release it?

My Iphone is stucked with the iclous remark about "Not enough storeage" and I cant release it.

Try a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

How can I release (or abort) a download which has stuck at Processing?

I have a music download (which I have been charged for) which has been stuck at Processing for over 10 days.
Unable to cancel or abort from iTune Store. My Music is now locked and unavailable. (VERY frustrating)
Unable to fully open iTune Store as it freezes part way and all I get is the text and boxes with no graphics or interaction
One discussion suggested that my modem may need re-flashing. As it was over 6 years old, I replaced it - but still can't clear the download.

Hi, Philipp,
Thank you very much for your prompt reply and support. The IE icon disappeared immediately after I downloaded MF. I tried to download IE again but without success. In the end all my icons on my start page disappeared, although I do not think this was to do with MF. I had to resort to restoring my lap top to factory settings for the umpteenth time and I have now got IE back but no MF. I will keep your advice and will try again when I am feeling brave enough and have sufficient time to try and download MF again. I am not confident with technical problems and greatly appreciate your help and support.
Kind regards, K.

Ashley wants to know. How can you release new iPad Air with no flash??? That's crazy.

Why doesn't iPad Air have a flash for the camera?

Probably for the same reason it doesn't do panorama photos or have the Passbook app.....it seems in Apple's version of the world, flashes are needed on portable, pocket devices. And that's not an iPad.

I have a 16 GB ipad2, and the "others" memory usage is in 2,8Gb. Does somebody know what is this about? How can I release space from that "others" issue?

Please help me to use better the available memory of my iPad2

Yeah, that's high.
First, try a system reset. I don't have too much confidence that it will help but it does cure many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

How Can I Include a Transaction in Maintenance View

Hi All,
Can anybody help me on how can I release transactions to be available to the end user by putting it in maintenance view? There is a request to include the transaction S_ALR_87001487 into the maintenance view put I need to know how can I achieve this.
Thanks,

Hi Ahmad,
Can you please explain clearly.
Are you asking us on how to create a maintenance view for transaction S_ALR_87001487 . You can create a Z transaction of similar attributes as that of standard one and give authorizations for the ztransactions for which user will be allowed to edit.
Regards,
Gautham Paspala

How can I release DHCP?

Similar Messages

Maybe you are looking for