How can I remedy losing my wifi signal a hundred times a day at least?
HOw can I remedy losing my wifi signal a hundred times a day?
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom
Similar Messages
-
My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?
OK great info!
I found 2 possible ethernet to USB adapters:
By "Plugable": USB 2.0 to ethernet LAN wired network adapter - seems this will work, but I'll contact Plugable.
2. Apple USB Ethernet Adapter
Easily connect your MacBook Air computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your MacBook Air and provides an RJ-45 connector that supports 10/100BASE-T performance. BUT NOT SURE IF THIS WILL WORK ON ANYTHING BUT a MacBook Air…
One person commented:
This little gem used to be the device of choice for adding a second Ethernet interface to a Mac Mini Server and I'd been using one that way for about a year. After doing a software update to 10.6.6 it stopped working. Forewarned is forearmed – it appears that Apple is finally enforcing the MacBook Air system requirement.
Thanks for any additional comments.
Best regards,
Steve Schulte
Sunday 6 January 2013 -
How can I boost ipad3's antenna signal reception?
My Wifi router name don't appear in wifi networks list when I'm in the bedroom, where as all other devises like laptop, Blackberry can see the wifi router signal very well. If I keep my ipad3 very near to the wifi router it works well.
The distance between wifi router and bedroom is not even 10 meters
How can I boost ipad's antenna signal reception to see my wifi router?
I already reset network settings and toggles airplane mode. Upgraded ios to the lastest version.There's no hardware solution.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
How can i use facetime over wifi on my iphone 4?
how can i use facetime on wifi on my iphone 4?
iPhone User Guide (For iOS 4.2 and 4.3 Software)
iOS: Using FaceTime -
How can i connect ipad mini wifi+celluar to 2g internet plan
Hello Sir!
After weeks of testing, i found the solution of my question. It´s quiet simply!!
1º iPhone (3G Internet acess) connected to Mac mini by USB or BlueTooth or WiFi.
2ª in Mac mini must be activated in "Preferencias", "Compartir", the option "Compartir Internet",
"Compartir Conexión desde": iPhone USB or Bluetooth PAN
"Con otros Ordenadores vía": Ethernet
3º Ethernet cable must be connected from Mac mini to Time Capsule !!
4º In Time Capsule "Internet": connect by: DHCP
"Network": bridged
Nothing more!!! Sooooo simply!!
After this, Windows XP SP3 connect without problem over TC´s WiFi or Ethernet to the Internet!
Also other Devices like IPad, or other iPhone, etc.
Of course it can be a created a WiFi connection (PPP) between the iPhone and the Mac
and it´s working to.
But ALWAYS, by changing the connection mode, must be changed the Thethering mode.
In- and Out-Going!
Thank you for your help, no I made me a "small" TC expert...lol -
My PS cs6 ask me to buy the program. I bought it several years ago. This is the third or 4th time I have had to talk to someone to straighten the program out. How can we remedy this problem PERMANENTLY?
What steps are you following each of those times to get things working again?
The way that Adobe activation and serialization works is kinda like signing into a website. When you log in, a cookie is left on your computer so that you don't have to sign in every time. With Adobe activation and serialization, you get similar cookie files, that way you never have to go through that process again. Adobe never touches those files again, it just checks them to make sure they are there.
You issue you are encountering is the result of this sort of cookie file being deleted, damaged, or invalidated in some way. In most cases, it is because of cleaning software treating it like a website cookie, thinking it is unimportant, and removing it. However, there are many other possibilities including files becoming corrupted due to disk or file handling errors by the system and major system changes.
To take care of the problem permanently, we have to find out exactly what the source of the issue is on your computer and eliminate it (or mitigate it if removing third-party software is out of the question). -
Hi folks, you might know how to fix this: my wifi shows (no hardware installed) then I went to system preferences and deleted the wifi connection, I went also to system information and I can not see wifi listed on Network, how can I create a new wifi or simply solve this, I have tryied shotdown pressing keys like P and R, option, etc. Please help me .
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
Whenever I try to "clear recent history," which I try to do after every browsing session, I get a message saying "A script on this page may be busy or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete. Script: chrome://browser/content/sanitize.js:133" I used to get this periodically before I upgraded to Firefox 6.0 but now I get it every time I try to clear my recent history. This happens on both my home and work computers and I'm using Firefox 6.0 and a Windows XP Professional SP2 operating system on each computer. How can I remedy this?
That can be caused by clearing the cookies via [[Clear Recent History]].
* Firefox/Tools > Options > Privacy > Firefox will: "Use custom settings for history" > [X] Clear history when Firefox closes > Settings
* Firefox > History > Clear Recent History or Tools > Clear Recent History
Try to exclude the cookies to see if that helps.<br />
Let all cookies expire when you close Firefox to remove unwanted cookies and keep the ones with an allow exception.<br />
Make sure that you do not clear the "Site Preferences" as that will remove all exceptions.
* Tools > Options > Privacy > Cookies: "Keep until": "I close Firefox"
If you use [[Clear Recent History]] to clear the cookies then Firefox also tries to clear the cookies from plugins like Flash and starts a plugin-container process for each plugin and that can add extra time and can cause an unresponsive script error to appear. -
Hi guys how can i turn on the WIFI on IOS 6 on a 4S ?
hi guys how can i turn on the WIFI on IOS 6 on a 4S
You'd do that if you wanted to add in all your contacts from facebook - it makes it useful to find out who's using other apps - 4 square - whatsapp, facetime etc. I had many facebook contacts that I don't call, however if they are using other things, I might be talking to them. So yeah, I decided to bring in all my facebook contacts. It has created a mess that I'm trying to clean up though. The mess is that I have a lot of duplicate contacts ( a facebook contact of Mary Smith and a contact on my phone of Aunt Mary). I know that when I go and edit one of the 2, there is an option to link the 2, which will then merge the data (adds email info, birthday, facebook contact info, twitter etc) but it doesn't delete one of the contacts. It should give an option to delete one of the merged contacts.. but it doesn't. I'm not sure how to fix this. I've been asking the boards here, but no solution has been given.
There has to be a way to do this (easily) that is -
HT2523 My TextEdit will not open email attachments ending docx. How can I remedy this?
My TextEdit will not open email attachments ending docx. How can I remedy this?
No, TextEdit cannot read those. You will need to convert them to .doc files first:
Mac users using Word 2004 who receive a Word 2008 for Mac, (or Word 2007 for Windows) document, will not be able to read this without having the Open XML Converter installed, which can be downloaded from Microsoft.
Go to this page:
http://www.microsoft.com/mac/downloads.mspx
and click on the right under Most Popular, 'Open XML File Format Converter for Mac 1.0.2'
This opens a window at the bottom of the page. Scroll that to the bottom and click on English.dmg, and it will download for you as a disk image, which can be installed in the usual way.
After installation you can open and read .xml formatted Word 2008 documents in Word 2004.
Update: This link http://support.microsoft.com/kb/976831 takes you to a newer version 1.1.3 (released Nov 10, 2009). -
IPad freezes, how can I remedy this?
My iPad freezes while on Facebook, how can I remedy this?
Are you using the Facebook App? If not, then try that.
-
How can i switch my att wifi with time capsule
how can i switch my att wifi with time capsule
Sorry I have no idea what you mean.. switch off, switch on, swap over.
Bridge the TC and use same ssid (wireless name), security but different channels..
Or just turn it off.
Please write a question that is a sentence and has sense. -
my i phone is telling me I need to do a restore. Screen shows itunes logo and thats it, even after turning off and on again.
if do this how can I avoid losing all my pictures videos etc?Pictures/Videos in your camera roll? If so, & not backed up or imported to your computer, they are gone. There's no supported way to recover them now.
-
My Pavilion G7 Suddenly Cannot Recognize WiFi Signal For Second Time In A Year
Hi All,
My Pavilion is about two years old and the
motherboard was replaced by HP while under
warranty.
For the second time in about nine months the notebook suddenly cannot recognize my router's
WiFi signal. This time if I do a system recovery I will have to reinstall 50 apps! I am trying to avoid this if possible. I understand that changing the bios settings may fix wifi issue but no idea how this step will affect (delete/save) files. Upgraded from WIN7 to 8 to 8.1. Please help. Thanks so much.
This question was solved.
View Solution.Hi @actionrob
Welcome to the HP Community. I hope you enjoy your experience with us. To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I saw your post regarding the problems connecting to your router. I will be happy to help you with that. I will need to know what the product number is for your notebook as there are a number of models in the g7 series. Try the troubleshooting steps in this HP document Troubleshooting Wireless Network and Internet.
Here are some generic steps that you can try as well:
Power cycle the network: (Do this even if you have other devices that work properly with the router as it will interact with each piece of hardware differently)
1. Shut down your notebook.
2. Unplug the power to your router.
3. Unplug the power to your modem.
4. Wait at least 45 seconds.
5. Plug in the modem, and wait for it to come back online.
6. Plug in the router, and wait for it to come back online.
7. Turn on your notebook, and test your connection.
Reset the TCP/IP settings:
1. Go to your start screen/menu and type CMD.
2. Right click on the command prompt icon and chose Run as administrator.
3. In the window that opens type "netsh int ip reset resetlog.txt" without quotes, and press enter.
4. Restart your PC and test.
Reset the winsock catalogue:
1. Go to your start screen/menu and type CMD.
2. Right click on the command prompt icon and chose Run as administrator.
3. In the window that opens type "netsh winsock reset" without quotes, and press enter.
4. Restart your PC and test.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP -
How can I calculate the waveform integral in a defined time interval?
Hi:
I need your help. How can I calculate the waveform integral in a defined time interval? For example: from "0" to "2pi"?!
Thanks.Hello Clecio,
You might want to try the Integral x(t) VI. The documentation for this VI notes:
Performs the discrete integration of the sampled signal X. Integral x(t) calculates a definite integral. The value of the output array at any value x is the area under the curve of the input array between 0 and x.
You would pass the samples of the waveform that fall between your particular window, then pass 1/number of samples for the d(t) parameter.
Hope that helps.
Wendy L
LabWindows/CVI Developer Newsletter - ni.com/cvinews
Maybe you are looking for
-
How do I sync my iPhone 4S with a new iTunes library without losing data?
Hi, I have been using an iPhone 4S for a few months now. Yesterday my PC crashed and I had to reboot the whole system. So, obviously I had to reinstall iTunes. Now, when I am connecting my phone with iTunes, it is informing me that my phone was synce
-
I have Windows 8 and Itunes 11.1.2. When I click on the Itunes desktop shortcut, Itunes won't open. I just the icon go to the taskbar and nothing more. Please help.
-
Not able to bring livecache instance into online state
Hi Folks, I am trying to do a livecache copy for our scm 4.0 ,from our production system into our dev.. I am following note 457425. I have successfully restored the database using DB gui, and now the instance is in "ADMIN" mode, while bringing it up
-
I am having an argument with a co worker. Can someone please settle this; Are Active Directory Domain Controllers OFFICIALLY supported on VMware??? Yes??? http://www.vmware.com/files/pdf/solutions/Virtualizing-Active-Directory-Do main-Services-on-VM
-
Dreamweaver/Photoshop Photo Album and linking
created a photo album test in Photoshop so that I could include security features such as watermarks. Once I created the album I exported it to Dreamweaver where I have all my website files. I am now having some challenges integrating the Photoshop P