How can I remove admin rights to a mobile user group

Hi Every one.
I am using Snow Leopard in an environment of about 1200 users. I need to strip the admin rights (i presume by a script accessing DCSL) from a group of Mobile Account users.
Does any body have suggestions on how to do this?
thanks
Matt

Sorted out using DSCL in a script.

Similar Messages

How can we set Admin rights to access all user mailboxes in IMAP server exchange 2010?

Hi,
IMAP is in exchange 2010..
as per guide:
http://technet.microsoft.com/en-us/library/jj200730%28v=exchg.150%29.aspx
CSV Files for IMAP Migration Batches`
Use super-user or administrator credentials. This requires that you use an account in your IMAP messaging system that has the necessary rights to access all user mailboxes.
In the CSV file, you use the credentials for this account for each row. To learn whether your IMAP server supports this approach and how to enable it, see the documentation for your IMAP server.
How can we set Admin rights to access all user mailboxes in IMAP server exchange 2010?
thanks?

Hi,
Do you mean assigning a user full access permission to all other mailboxes? If so, we can try the following command:
Get-Mailbox -Server “Exchange 2010” | Add-MailboxPermission -User AdminUserName -AccessRights FullAccess
Thanks,
Winnie Liang
TechNet Community Support

How can we provide access/provide permissions to a user/group for group of folders at single step??

Hi Nico, Thaks you so much for your reply,, Can you please advice or give me some steps to write script pelase? Regards,Kareem

Hi All, How can we provide access/provide permissions to a user/group for group of folders at single step?? I can able to provide access for a single folder at a time. I want provide access to a list of folders( more than 30 ..) at single step?? Regards,Kareem

How can I give administration permissions to a specific user+group on wiki?

How do I give administration capabilities to a specific user for only ONE specific group on my wiki server, not all of them.
Anyone know the simplest way to do this?

Really all I'm looking to do is to keep my web site exactly the same but limit the reading and writing capabilities of some users on specific groups/wiki pages/blogs but still allow them to read and write to other specific ones that somehow I would designate.
For example: I'm setting up a group for multiple users (about 15), and they each have their own page within that group, however i want to give them very limited administration capabilities on the site, all I want them to be able to do is to edit their own page, NOTHING else in the group
there's gotta be a way to do this without 3rd party software installation that seems complicated enough on it's own, isn't administration capabilities a fundamental part of wikis?
Someone has to have gone through something similar, any help?

How can I remove the default right click option of the text Area control?

How can I remove the default right click option of the text Area control?
Is there any way to disable this control in any of the text controls available?

The iPhone does not store email addresses for received mail. The iPhone stores all email addressees for sent mail in a list of previous recipients. The list of previous recipients is not synced with Outlook or any address book, but the list of previous recipients is included with the iPhone's backup which is updated by iTunes as the first step during the iTunes sync process. The auto-addrss feature pulls from your contacts on the iPhone and from the list of previous recipients.
Different from the Mail.app on a Mac, there is no access to the list of previous recipients on the iPhone to remove a previous recipient from the list, or to add a previous recipient to contacts that is not already entered - not at the present time anyway.
The only way to purge the existing list at the present time is by restoring your iPhone with iTunes as a new iPhone or not from your iPhone's backup.
Hopefully access to the list of previous recipients will be included with the iOS 5 update.

I cannot remove the rotate screen sign on the upper right of my iphone5s, how can i remove it?

My iphone is locked & can't be rotated, tgere us a sign but I cannot remove the rotate screen sign on the upper right of my iphone5s, how can i remove it And rotate the phone ?

Locking Orientation
(Note that I am affiliated with this site, it contains a donate button, and some pages contain ads).

How can I remove the applications form Content Administrator

I had undeployed the applications from Content Administrator in two ways:
A:
1. Start the tool using the go.bat located in \usr\sap\<SID>\<Instance Name>\j2ee\admin folder
2. Log in with an Administrator user.
3. Under the Server node click Services-> Deploy.
4. In the runtime tab, on the right hand side screen click on the Applications checkbox. The list of all deployed applications appears.
5. Select the application and click on the Remove button.
B:
Undeploying using SDM remoteGUI.
after I finished that,the application still exist in the browse of Content Administrator Web Dynpro.
But it is'n invailable.When I click the application name,it throws exceptions:
Failed to get the list of names of referenced deployable objects for deployable object 'local/Welcome'.
Failed to get list of defined JCO clients for deployable object 'local/Welcome'.
Failed to get the list of names of referenced deployable objects for deployable object 'local/Welcome'.
Failed to get enable state for 'local/Welcome'.
No resource bundles found for development component ''local/Welcome''.
My question is , how can I remove it form the list.

Hello,
     What is the version of the server you are using?
     The steps you have followed are perfectly fine and I don't see any issue there.
     I hope you refreshed the list on the Content Administrator before accessing the application.
Kind Regards,
Padma

How can I remove the applications from the Content Administrator

I had undeployed the applications from Content Administrator in two ways:
A:
1. Start the tool using the go.bat located in \usr\sap\<SID>\<Instance Name>\j2ee\admin folder
2. Log in with an Administrator user.
3. Under the Server node click Services-> Deploy.
4. In the runtime tab, on the right hand side screen click on the Applications checkbox. The list of all deployed applications appears.
5. Select the application and click on the Remove button.
B:
Undeploying using SDM remoteGUI.
after I finished that,the application still exist in the browse of Content Administrator Web Dynpro.
But it is'n invailable.When I click the application name,it throws exceptions:
Failed to get the list of names of referenced deployable objects for deployable object 'local/Welcome'.
Failed to get list of defined JCO clients for deployable object 'local/Welcome'.
Failed to get the list of names of referenced deployable objects for deployable object 'local/Welcome'.
Failed to get enable state for 'local/Welcome'.
No resource bundles found for development component ''local/Welcome''.
My question is , how can I remove it form the list.

Hi,
Have you restarted the server after removing the application from the Visual Admin?
Regards,
Satyajit.

How can I remove exportpdf window from my screen?

how can I remove exportpdf window from my screen? It clutters things up and is very annoying
Ed

I accessed it via reader, thinking it was a free part of Reader, but don’t have a use for it, and now I cannot get it off the screen where it takes up the right-hand 2 inches of my screen as clutter.
Any ideas?
Ed
<removed by admin>

How can you remove pop up ads

How can you remove pop up ads.

You installed the "SaveKeeper" adware. To remove it, please take the steps below.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of the date it was posted, as far as I know.They won't necessarily be valid in the future. Anyone finding this comment after a few days from now should look for more recent discussions or start a new one.
1. From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need. If in doubt, uninstall all extensions, including any with the name "RightCoupon," "SaveKeep," or similar. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
2. In the Applications folder, there may be an item with the name "SaveKeeper" or similar. Move it to the Trash and empty. If you get a warning that the item is in use, force it to quit, then try again.
The rest of this comment is optional. I can't be sure that you don't have a variant of SaveKeeper that I'm not familiar with, or that you haven't installed some other kind of malware in addition to SaveKeeper. If you want to rule out that possibility, see below.
1. This procedure is a diagnostic test. It changes nothing, for better or worse.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) on the advice of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.evenflow.dropbox com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; BI () { $PB\ :CFBundleIdentifier "$1"; }; LC () { $2 launchctl list | awk 'NR>1 && !/0x|\.[0-9]+$|com\.apple\.(AirPortBaseStationAgent|launchctl\.(Aqua|Background|System))$/{print $3}' | grep -Fv "$1"; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"and $((l-25)) more line(s)"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps Model; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^EO]|x([^8]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm POST; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/s/^.*://p' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;/Apple|Intel|SMSC/d;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm Heat; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; o=; fdesetup status | grep -q On && o=On; Ps FileVault; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel log"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; bi=`egrep '\.(kext|xpc)/(Contents/)?Info.plist$' <<< "$sys" | while read i; do [[ -f "$i" ]] && BI "$i"; done`; o=`kextstat -kl | grep -Fv "$bi" | cut -c53- | cut -d\< -f1`; Pm "Kernel extensions"; li=`egrep 'Launch[AD].+\.plist$' <<< "$sys"`; jl=`while read f; do [[ -f $f ]] && $PB\ :Label $f; done <<< "$li"`$'\n'"$bi"; R && o=`LC "$jl" sudo`; Pm Daemons; o=`LC "$jl"`; Pm Agents; o=`for d in {/,}L*/Lau*; do M; done | grep -Fv "$li" | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; p=`lsbom -pfc /var/db/*/*.BSD.bom | sed -En '/peri.+\/.+\./s/^\.\/[^/]+//p'`; [[ "$b" && "$l" && "$p" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do i="$d"/Info.plist; [[ -f "$i" ]] || continue; ID=$(BI "$i") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Shared libraries"; o=`find -L {,/u*/lo*}/e*/periodic -type f -exec cksum {} \; | awk '{print $3"\t"$1}' | grep -Fv "$p" | awk '{print $1}'`; Pm "Periodic scripts"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=; defaults read /Library/Preferences/com.apple.alf globalstate | grep -q 0 || o=On; Ps Firewall; o=`scutil --proxy | egrep 'Prox.+: [^0]'`; Pm Proxies; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print}; /v6:/{if ($2 !~ "A") print}'`; Pm TCP/IP; [[ "$I" =~ [AW]i ]] && { o=`/S*/*/P*/*/*/*/*/airport -I | awk '/lR/{print $2}'`; o=$((o<=-87?o:0)); Ps RSSI; }; R && o=`sudo profiles -P | grep : | wc -l`; Ps Profiles; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc hosts <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "App check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`find .??* -path .Trash -prune -o -type d -name *.app -print -prune`; Pm "Hidden apps"; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font issues"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps UID; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Removing Admin Rights

Hi
To get an audible account to register in itunes I had to give an account Admin rights... now I want to take the Admin rights away from the user, but can't seem to do it.
Can someone tell me how to remove Admin rights (the tick box is currently 'greyed' out in the preferences box)?
Thanks in advance!

you may have abandoned this thread, but in case not could I suggest you do not delete the second admin. Apples dictum, a good one, is have a reserve admin. One can, I have had one, a failure of an admin, and used the reserve admin to fix it. I keep two admins on each machine. One is just kept in reserve so as 'not damaged by use'. I exercise it every so often.
If you log in from a blank dialogue box you will not even see the name except in the users folder or some other esoteric listings.
Of course you do 'always' have another admin in root but it is a clart enabling it and disabling it which one should always do after use of root.

How can I remove credit card from itunes account?

How can I remove credit card from itunes account?

I'm not home right now, so don't have iTunes here. I am basing this on having to do this a few days ago, as well as pictures from Google Images, so things may have different names now...
Store (dropdown at top of iTunes screen)>View my account>Edit Payment Information>In the list of types of credit cards, the one at the far right says "None." Click that.

HT1657 I couldn't play movie rental and accidentally rented it twice. How can I remove one of the charges?

I just bought and used my apple tv. I tried renting a movie but was asked to go to my itunes to verify my info. In the process, I ended up renting the movie 2x and had to accept to be able to get the PLAY button to pop up on the screen. I watched to movie but do not want to be charged 2x for rental.
How can I remove one of the charges?

You can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

How can i remove Ubuntu from my laptop

yes im an idiot, i installed ubuntu over windows when my computer died and How can i remove Ubuntu from my laptop cause i tried to reformat but kept giving me the blue screen error and its realy annoying me,Ubuntu just isnt right for me please help me :L

aquos wrote:
i have an h.p. g60 535 dx note book,windows was wiped out so i installed ubuntu and don't like it is there a sequence of key strokes that will erase the pc back to factory? ubuntu is useless ...thanks i forgot what ever name i made up to register. just use m.h.Not if you wipe the Factory recovery partition then you will have to order the Factory REcovery media from hp. Obtaining HP Recovery Discs or an HP USB Recovery Drive
Read this before ordering your Recovery Discs! (US and Canada Only)

How can i remove them from my purchased(no hidden them)and my account for ever?

hello
I got a few free app before and did not download them completely and dont want to do this,
but they stay in my purchased and start automatly when i connect to itunes store and going to crazy me
How can i remove them from my purchased(no hidden them)and my account for ever?
(I want to delete all free apps and Books from my purchases.)
please help me
thank you.

There is no way to do it. Others have asked for the very same thing that you are asking for, but currently it just cannot be done. You can't remover purchases from your Purchase History - you can hide them - but you can't delete them from the history.
You can delete the Apps from the iPad and you can delete them from iTunes on the computer. Delete them from iPad, delete them fromiTunes so that when you sync there is no chance that they will come back. Then hide the purchases. That's the best that you can do.
On the iPad, tap and hold down on the app icons until the X pops up. Tap the X to delete the apps.
In iTunes, clcik on Apps under the Library heading on the left. Right click on the apps that you want to delete and follow the prompts.

How can I remove admin rights to a mobile user group

Similar Messages

Maybe you are looking for