How can i remove headphones mode of my ipod?

how can i remove headphones mode of my ipod?

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iOS device. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

Similar Messages

My headphone is stuck in the jack of my Mac Pro how can i take headphone mode off

my headphone is stuck in the headphone jack of my mac pro, how can i take it off headphone mode

I am on SL, not ML, but should have this under SystemPreferences > UniversalAccess

How can I remove old musics from my Ipod to put new ones using ITunes

How do I change and manage my musics on the Ipod Nano using windows 7 and ITunes?

That's a very general question, so here are two documents from Apple for using automatic syncing and manually managing content.
Sync your iPhone, iPad and iPod with iTunes using USB - Apple Support
Manage content manually on your iPhone, iPad, and iPod - Apple Support
If your question is actually about removing content (you know how to add content), you are probably using the manual method to add content, and don't know how to manually remove content. For iTunes 12, on the horizontal bar that goes across the iTunes window (near the top), click the Music button near the left end. Near the middle of same bar, click Playlists. The sidebar appears along left side of window and Devices, your iPod is listed. Click the small triangle to the left of the iPod's name, to drop down its content list (indented below iPod). Click Music there. To the right, the list of songs on the iPod is shown. Select the song you want to remove and press Delete on the keyboard. You can do this with one or more songs selected.
You can also use the iPod's "management" screen. Select the iPod in iTunes, so that you see its Summary settings screen. In the sidebar, under On My Device, click Music. This is the same as on the "content list" described above.

How can I remove "other" Capacity if my ipod is completely empty?

i just reformatted and restored my ipod to a mac. I have not added any songs yet but under the summery page it states I have 20.8 MB Other Capacity (Orange).
Please help

If it's in GBs it's unusually large. This often happens when the iPod data base becomes corrupt.
If the iPod is enabled for disk use, you can look at the folders on the iPod through Explorer or Finder and delete anything you don't want.
if it's a corruption it may need to be restored, see how to restore the iPod to factory settings which will erase the iPods contents and reclaim the used space.
Then reload the music from iTunes.

How do I remove duplicate calendars from my iPod Touch?

I just synced iCal with my iPod after removing mobile me and now I have duplicate calendars on my iPod Touch. How can I remove these calendars? My iPod has one set of calendars that is called "On my iPod Touch" and another set (exactly the same) called "untitled account". I'd like to remove the untitled account and I would like to know if there's something I should change to avoid the duplication in the future. Thanks.

If the calendar still exists in iCal, delete it there and then sync your iPod. That should eliminate the extra calendar(s).
If that doesn't do it, make sure iCal is setup the way you want it and then do the following:
1. With your iPod recognized by iTunes, click on the Info tab in iTunes.
2. Scroll to the bottom of the page
3. Check the box on the application that you want to overwrite data on the iPod
4. Sync your iPod
That box will not stay checked so you don't need to worry about accidently doing it again.

How can I remove the background sound from the headphone jack for my MacBoo

for my MacBook Air problem adding music intensifier (Panasonic ST-HT1000) to give it an unpleasant sound background that sounds like a whiz, it's not so loud, but it is an unpleasant .. after a short time can get used to, but the fizz does not pass, however, believe that it is a big problem.
Further I notice that when MacBookAir disconnected from the charger, it remains quieter sound.
At first thought that the headphone jack (3.5 mm Headphone:
Connection: 1/8-Inch Jack) or wiere have problem, but tried 3 different cables, but that does change enything, the problem remains.
When I added iPhonu3GS playing - the background sound were not, then everything is OK!
How can I remove the background sound from the headphone jack for my MacBook Air 13?

There is no way to bring that up unless you have it typed in a document. You can use My Support Profile to find a list of serial numbers that have been purchased or registered with your Apple ID.
http://support.apple.com/kb/HT2526?viewlocale=en_US
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD  240G Vertex 3 SSD Boot HD 

How can i remove the end pice/pin from my headphones out of my computer?

how can i remove the end pice/pin of my headphones out of my computer?

IF you cannot pull it out with your finger tips, you need to take the machine in for service to an Apple Store or AASP. Doing this type of work yourself could seriously damage the computer so it's best left to professionals.

How can i remove password from my I Pod

how can i remove password from my I Pod

If you mean you can't get past the screen lock then:
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

How can I remove icons from the Finder sidebar? Were transferred when I set up laptop from my desktop computer. Tried dragging off but that didn't work.

How can I remove icons from the Finder sidebar? Transferred info from my Mac Pro desktop computer (using target mode) and there were folder icons on the Mac Pro Finder sidebar that are now on the MacBook Finder sidebar, even though these folders do not exist on the MacBook. Tried to drag them off, which is the usual way to get rid of folders that the user adds to the sidebar (as opposed to those that can be added via the Customize Toolbar dropdown menu) but was unsuccessful. I then unchecked all of the Customize Toolbar menu items and the folder icons still remained. What else can I do?

Did you hold the Command (Apple) key while dragging them off the sidebar? That usually makes them go *poof*.

How can i remove a hybrid mbr from my system drive so that Efi booted windows will install.

Hi,
i have just clean installed OSX lion on a freshly wiped drive in my macbook pro, using a bootable lion installer usb i used disk utility to partition my drive into a mac and a windows partition under the GPT/GUID partition scheme, i then proceeded to install lion onto the mac partition, and completed the set up, All Good...
so i plug in my Windows 8 EFI Boot USB stick (Notice, EFI boot here, NOT BIOS EMULATION BOOT), shutdown and power on the mac and proceed to the boot picker by holding option, So far so good, the usb key is recognised and the system boots into the Windows Setup in EFI mode, Enter product key, accept terms and so on, Now i select my Windows partition and windows Says That it cant install to Partition 4 (EFI Partiton, OSX Lion, Lion recovery, Windows), It says that it can only install to a GPT / GUID based disk as expected...
Why is there a protective MBR on my drive when i didnt add one, and i have not even touched bootcamp assistant...
How can i remove this Protective MBR from my drive so that my disk is PURE GPT so windows can install?
hours of googling has turned up nothing...
System:
Macbook Pro 13 inch Mid 2009
Mac os: OSX Lion
Version of windows trying to install: Windows 8 Release Preview 64 bit in EFI Mode

Alexander, I would like to apologize for the TERRIBLE answers you have been given so far. I too had this question, and so here is what my thoughts are, as maybe they might provide insight in leading you towards the answer.
I am a *nix user in general, and thus own a mac and a thinkpad. In fact I just got my thinkpad not too long ago. As such, I transfered my faster hard drive to my faster computer, which made logcal sense to me. Ergo, I moved my Mac drive to my lenovo. On this drive I have a hybrid mbr which is no longer needed. So my thoughts are this:
From what I gather, the UEFI standard indicates that there is to be a protective MBR on all GPT systems. This is so that when you use programs that are not GPT aware, they will see a presumably "full" drive and not think that they have the right to destroy your existing data in what it thinks is free space. For instance, fdisk or other MBR only partitioning systems. Thus, if your system has only a MBR with a single EE partition, it would be my guess that it was in fact not put there by installing Windows, but rather for the protection of your system.
If you are in my situation, where you do indeed have a hybrid MBR with written out partitions, it would be my guess that the only way to rid yourself of it is to do it manually. The way I would recommend, is using gdisk (gpt fdisk). It is command line only, but the syntax is pretty easy:
$ sudo gdisk /dev/disk0
Assuming you are using your mac partition and your primary hdd is disk0. That will put you into an interactive session of gdisk. Enter "?" for command options. What you need is the "recovery and transformation" section which is the "r" I think. From there I would say you probably want to create a new hybrid mbr (you will be using this to delete it). When it asks you for the partitions you would like to include, just hit enter. It should then ask you if you would like to create a protective entry for the remainder of the empty space. This is what you want so tell it to do that. After you are done, "w" will write and exit. You may want to first use the "p" to print and ensure that you have what you want. You can proabably check your work by using fdisk as so:
$ sudo fdisk -l /dev/disk0
I hope this helps you, and if you find that there is a better way, I hope you might enlighten this thread.
Cheers!
PS The command examples, the $ is to indicate it is a bash/shell command as a non-root user, do not include it in the command.

How can I remove this purple grid (see picture)?

I got an INDD document to complete from someone else and it contains this purple grid (see picture).
How can I remove it? (I don't need it)
Thanks
Christian

It's just guide lines, they will not show up in your final product. (Well ... unless you happen to have checked "Include Guides" on exporting to PDF.) Switching to "Preview" mode will hide them from view.
You can safely ignore them, for anything you are designing. Just pretend they are not there. If you find objects are snapping to these guides (which is one of their primary functions), toggle off "Snap to Guides".
You can't switch them off *entirely*. You can set the number of columns to "1" (it seems to be set to "4" here), but you'd still have the *outer* guides, indicating the default text margins for your document. You can set these margins to "0" , but then the purple lines are drawn on top of the actual page border, which may still be somewhat distracting.

How can I remove the messages list on imessage on ipad?

How can I remove the messages list on imessage on ipad?

If you want to delete messages from the list - Tap the Edit button in the upper left corner of the messages app - above the Messages list. Then tap the red circle next to the messages that you want to delete.
But ....if you are asking how to remove the entire list from the screen so that you can use messages in a "full screen" type mode, there is no way to do that.

How can I remove asm and ocr installation in AIX?

Hi,
I try to install single instance with using ASM in AIX.
But I did not make successfully.
Now I want to remove ASM and OCR installation then
I will plan to make new clear installation.
How can I remove asm and ocr ??
Or How can I control my removing is fully correct ?

1) ASM Instance Clean-Up Procedures
Stop all of the databases that use the ASM instance that is running from the Oracle home that is on the node that you are deleting.
On the node that you are deleting, if this is the Oracle home which from which the ASM instance runs, then remove the ASM configuration by completing the following steps. Run the command srvctl stop asm -n node_name for all of the nodes on which this Oracle home exists. Run the command srvctl remove asm -n node for all nodes on which this Oracle home exists. If there are databases on this node that use ASM, then use DBCA Disk Group Management to create an ASM instance on one of the existing Oracle homes on the node, restart the databases if you stopped them.
If you are using a cluster file system for your ASM Oracle home, then ensure that your local node has the $ORACLE_BASE and $ORACLE_HOME environment variables set correctly. Run the following commands from a node other than the node that you are deleting, where node_number is the node number of the node that you are deleting:
rm -r $ORACLE_BASE/admin/+ASMnode_number
rm -f $ORACLE_HOME/dbs/*ASMnode_number
If you are not using a cluster file system for your ASM Oracle home, then run the rm or delete commands mentioned in the previous step on each node on which the Oracle home exists.
2) Deleting an Oracle Clusterware Home Using OUI in Silent Mode
!!! Oracle recommends that you back up your voting disk and OCR files after you complete the node deletion process.
If you ran the Oracle Interface Configuration Tool (OIFCFG) with the -global flag during the installation, then skip this step. Otherwise, from a node that is going to remain in your cluster, from the CRS_home/bin directory, run the following command where node2 is the name of the node that you are deleting:
./oifcfg delif –node node2
Obtain the remote port number, which you will use in the next step, using the following command from the CRS_home/opmn/conf directory:
cat ons.config
From CRS_home/bin on a node that is going to remain in the cluster, run the Oracle Notification Service Utility (RACGONS) as in the following example where remote_port is the ONS remote port number that you obtained in the previous step and node2 is the name of the node that you are deleting:
./racgons remove_config node2:remote_port
On the node to be deleted, run rootdelete.sh as the root user from the CRS_home/install directory. If you are deleting more than one node, then perform this step on all of the other nodes that you are deleting.
From any node that you are not deleting, run the following command from the CRS_home/install directory as the root user where node2,node2-number represents the node and the node number that you want to delete:
./rootdeletenode.sh node2,node2-number
If necessary, identify the node number using the following command on the node that you are deleting:
CRS_home/bin/olsnodes -n
Perform this step only if your are using a non-shared Oracle home. On the node or nodes to be deleted, run the following command from the CRS_home/oui/bin directory where node_to_be_deleted is the name of the node that you are deleting:
./runInstaller -updateNodeList ORACLE_HOME=CRS_home
"CLUSTER_NODES={node_to_be_deleted}"
CRS=TRUE -local
Deinstall the Oracle Clusterware home from the node that you are deleting using OUI as follows by running the following command from the Oracle_home/oui/bin directory, where CRS_home is the name defined for the Oracle Clusterware home:
./runInstaller -deinstall –silent "REMOVE_HOMES={CRS_home}"
Perform step 9 from the previous section about using OUI interactively under the heading "Deleting an Oracle Clusterware Home Using OUI in Interactive Mode".

How can I remove sites listed under "Most Visited?" Clearing history doesn't accomplish this.

The tool bar has a category "most Visited" sites and lists the top site. How can I remove this? Clearing the history has not accomplished this.

Hi,
Usually the category is emptied when the entire history range is erased. You can also permanently remove the '''Most Visited''' category by right-clicking on it and '''Delete'''.
Useful links:
[https://support.mozilla.com/en-US/kb/Options%20window All about Tools > Options]
[http://kb.mozillazine.org/About:config Going beyond Tools > Options - about:config]
[http://kb.mozillazine.org/About:config_entries about:config Entries]
[https://addons.mozilla.org/en-US/firefox/addon/whats-that-preference/ What's That Preference? add-on] - Quickly decode about:config entries - After installation, go inside about:config, right-click any preference, enable (tick) MozillaZine Results to Panel and again right-click a pref and choose MozillaZine Reference to begin with.
[https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]
[https://support.mozilla.com/en-US/kb/Viewing%20video%20in%20Firefox%20without%20a%20plugin Viewing video in Firefox without a plugin]
[http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]
[https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
[https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting Basic Troubleshooting]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://kb.mozillazine.org/Testing_plugins Testing Plugins]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins Troubleshooting Plugins]

My friends put cydia on my ipod and other stuff from it like something who slide your apps differently how can i remove the both, plz help ..???

My friend put cydia on my ipod and other stuff from it like something who slide your apps differently. How can I remove the both, I really want, plz help ...?

They hacked it and may have caused damage to your device. Jailbreaking also voids your warranty and support from Apple. To restore to a clean state, restore in Recovery Mode: http://support.apple.com/kb/HT1808

How can i remove headphones mode of my ipod?

Similar Messages

Maybe you are looking for