How can i remove manually oracle 10g express edition from vista

hello
i use windows vista
how can i remove manually oracle 10 g express edition
please help

1. Uninstall all Oracle components using the Oracle Universal Installer (OUI).
2. Delete the HKEY_LOCAL_MACHINE/SOFTWARE/ORACLE key which contains registry entries for all Oracle products by using regedit.
3. Delete any references to Oracle services/components in the following registry location: HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Services/. Looks for key entries that starts with “Ora” which are obviously related to Oracle.
4. Reboot the workstation.
5. Delete the ORACLE_BASE directory. (i.e C:\Oracle)
6. Delete the C:\Program Files\Oracle directory.
7. Empty the temp directory.
8. Empty the recycle bin.
have you done this?

Similar Messages

Can i work with oracle 10g express edition by connecting it with visuval studio 2010?

i have oracle 10g-express edition,and visuval studio 2010, can i have a connectivity between these two?or it requires any additional installations,or any special procedures for installing it? HELP ME..

You might want to post this in the Oracle 10g XE support forum, where you might get a better response. The is is the support form for Oracle App Express..
Thank you,
Tony Miller
Monroe, WA

Can not connect Oracle 10g express edition from report builder.

I have newly installed report builder . Different home was selected for Report builder and oracle. Oracle database server is also in the same machine. But i am not able to connect my oracle 10g express edition database. It throws error ORA-12154 : TNS could not resolve service name.( same error displayed while trying to connect from SQL Plus).But from toad i am able to access the database. May be because here I am able to select the proper home.
Here i am adding my tns entry
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 1ECA66A679AB494)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
can any one suggest what the actual problem is?
Thanks ..........

Hello,
Oracle 10g XE is rather specific and, I'm not sure that you can upgrade it to 10.2.0.4 .
However, Oracle published an Upgrade Guide for Oracle Express Edition but, it's limited to *10.2.0.3*:
http://download.oracle.com/docs/cd/B25329_01/doc/server.102/b32391/toc.htm
But be careful:
Once you have upgraded to Oracle Database 10g, you cannot downgrade back to Oracle Database Express Edition.Hope this help.
Best regards,
Jean-Valentin
Edited by: Lubiez Jean-Valentin on May 22, 2010 12:06 AM

How to install and configure Oracle 10g Express Edition on Fedora 11?

Hi everyone!
I have recently installed Oracle 10g XE on my Laptop Gateway T-1625, which has Fedora 11.
I followed the install instructions on [http://st-curriculum.oracle.com/tutorial/DBXETutorial/index.htm] , and configured the server as explained, but something is wrong... When I try to go to the database home page http://127.0.0.1:8080/apex, I get "Failed to Connect" on Firefox 3.5b4... I don't think it's because of the Firefox version because it's proved to be very stable (for a beta).
I've search for similar issues on GNU/Linux and I found this thread in these forums: [ http://forums.oracle.com/forums/thread.jspa?threadID=915218&tstart=0] , but the solution is for Ubuntu 9.04, and if it's possible I would like to know a specific solution for Fedora 11.
I also tried to see the oracle server status with:
# /etc/init.d/oracle-xe status
And I got this....
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 25-JUN-2009 22:10:31
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=talos)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
I hope someone can help me out and guide me on the right direction. Thanks a lot!

Hi again!
After your last post I realized that the dba group and the oracle user already existed.
#groupadd dba
groupadd: group dba exists
#useradd oracle -d /home/oracle -s /bin/bash -g dba
useradd: user oracle existsHowever, I finally assigned a password for that account and changed the ownership of the /usr/lib/oracle/xe
with the commands you suggested:
passwd oracle
chown -R oracle:dba /usr/lib/oracle/xeAfter this, I can log in as the oracle user but the SELinux showed a warning and the /usr/lib/oracle/xe
is treated as the oracle home, and no .bashrc file is located on this home. This is the SELinux warning:
SELinux is preventing gdm-session-wor (xdm_t) "write" to /usr/lib/oracle/xe (lib_t).
Details:
SELinux denied access requested by gdm-session-wor. /usr/lib/oracle/xe may
be a mislabeled. /usr/lib/oracle/xe default SELinux type is user_home_dir_t, but its
current type is lib_t. Changing this file back to the default type, may fix your problem.
File contexts can be assigned to a file in the following ways.
* Files created in a directory receive the file context of the parent
directory by default.
* The SELinux policy might override the default label inherited from the parent directory
by specifying a process running in context A which creates a file in a directory
labeled B will instead create the file with label C.
An example of this would be the dhcp client running with the dhclient_t type and
creates a file in the directory /etc. This file would normally receive the etc_t type due
to parental inheritance but instead the file is labeled with the net_conf_t type
because the SELinux policy specifies this.
* Users can change the file context on a file using tools such as chcon, or restorecon.
This file could have been mislabeled either by user error, or if an normally confined
application was run under the wrong domain.
However, this might also indicate a bug in SELinux because the file should not have
been labeled with this type.
If you believe this is a bug, please file a bug report (http://bugzilla.redhat.com/bugzilla/enter_bug.cgi)
against this package.
Allowing Acces:
You can restore the default system context to this file by executing the restorecon command.
restorecon '/usr/lib/oracle/xe', if this file is a directory, you can recursively restore using
restorecon -R '/usr/lib/oracle/xe'.
Fix command:
restorecon '/usr/lib/oracle/xe'I suppose the command #useradd oracle -d /home/oracle -s /bin/bash -g dba is where I can define the user's home, but if this user already exists how can I modify its settings?
is SELinux preventing the .bashrc file to be created? or what could be causing this?.
I hope you know how much I appreciate your help and want to thank you for your time.

Installing Oracle 10G Express Edition on Linux after installing Libaio-0.3

I had got a error while installing 10G Express Edition on Redhat Fedora core 4 linux after installing libaio-0.3.104-2.i386.rpm
I had given the following command in Linux Command prompt to install the oracle database 10 G Express Edition (oracle-xe-10.2.0.1-1.0.i386.rpm)
# sudo rpm -ivh /tmp/oracle-xe-10.2.0.1-1.0.i386.rpm
The error I had got is as follows:
Preparing.....#####################[100%]
1:oracle-xe Warning:/etc/init.d/oracle-xe saved as /etc/init.d/oracle-xe.rpmorig
error:Unpacking of archive failed on file /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/ons;4698950F:cpio:MD5 Sum Mismatch

The steps I am asking is for installing oracle 10G express edition on Redhat Fedora core 4 Linux version. Now, after downloading the fresh copy of Oracle 10G express edition from the Oracle site. I have successfully installed oracle now.
I was getting the following errors - I have pasted previous query for the problem which I had faced after installing Oracle 10 G Express Edition successfully on Redhat Fedora Core 4 Linux.
The Previous Query is as follows:
Thanks For Guiding Me All of you!
Finally, I have installed Oracle 10G Express Edition on Redhat Fedora core 4 Linux.
Now, I am having the following problems:
After making the changes as per my Reference mentioned in my different messages, I had done the troubleshooting steps going to Options and setting the same.
1.When I try to load the http://127.0.0.1:8080/apex page it gives an error popup:
" The connection was refused when attempting to contact 127.0.0.1:8080 "
2. After opening the Run the SQL Command Line by clicking on applications and When I say " Connect System and when prompted for password, I have entered the password and gives another error as follows:
ORA-01034 : Oracle not available
ORA-27101: Shared Memory realm does not exist
Linux Error:2:No such file or directory
3. When I try to manually start the Listener or Services, It gives one more error:
Root Not a Member of DBA Group
I need to What is happening or What is the Problem and How will I rectify them?

What we actually doing with oracle 10g Express Edition???

Hi all,
i'm a housewife.... i like to work on oracle which is very new to me.... so i recently downloaded "oracle 10g Express Edition" from oracle.com....
i got
run sql commamd line
get started
backup database
start database
stopdatabase
go to database homepage
why those all above???? how i can practice myself on exp' edition???.... actually what the s/w engineers do with express edition???
i follow the instructions given for get started....
i can view sometables which already exist....
what is the use with that.....i don't have any idea when work with get started.....i just follow the instruction given on help and create a table....
what is the actual use of express edition???

Hi,
10g express edition (XE) is free database version of 10g. Application Express (Apex) is already installed to it.
Apex version that comes with XE is 2.1.
You can upgrade it to version 3.2.1 witch is latest one. New version of Apex comes with some nice features like interactive reports.
If you have installed XE you are ready to go developer Apex applications and practice Oracle database
Edit:
http://www.oracle.com/technology/products/database/application_express/html/apex_and_xe.html
Br, Jari
Edited by: jarola on Aug 31, 2009 7:48 AM

Installing and Running Oracle 10g Express Edition on Microsoft Vista

My computer is running on Microsoft Vista.
I downloaded Oracle 10g Express Edition for Vista.
I ran the setup.exe. Everything went well there.
But, when I open the SQLPlus program, a window prompts me to enter my username, password and host string.
Can someone please tell me what it is expecting for these fields? I am using the same username and password I used to create my Oracle account.
But what is the host string?
Appreciate it.
Thanks.

This may help
http://sites.google.com/site/delphibasics/home/delphibasicsarticles/installingoracledatabase10gexpresseditiononwindowsvista
Check out the section "Access demonstration data"
Also this is not the best place to post a question of this nature. This might be better :
Database Installation
Best Regards
mseberg

Oracle 10g Express Edition Host , Port, ServiceId(SID)

Hi
I am trying to connect Oracle 10g Express Edition from Net Beans. But it is prompting for the following detials.
Host , Port, ServiceId(SID).
Please help me .
Thanks in Advance.
PurnachandraRao.

Drop down to a command line. Enter the command 'lsnrctl status'. That will tell you all this information.
Often it is 'localhost', port 1521, and always SID=XE

How can i create a new database instance in oracle 10g express edition?

hello everybody
i'm a student
i am developing a database application
i'm using oracle 10g express edition
to run my application i need to create another database instance
but i didn't find any option for doing so in that product
if there is pls tell me where it is?
if not pls tell me how to manually create it?
regards,
Chaitanya

Chaitanya Babu M wrote:
yaa i'm sure about that .
i want one more instance of database.Can you perhaps explain why? I have a fair share of production and development servers - and not a single one of them needs to run more than one database instance.
So I'm interested in what requirement you are trying to satisfy by using two database instances on a single platform.
Oh yeah - if you want to create a custom XE instance (different SID, different tablespace sizes, more/less PL/SQL stuff installed, hack standard), make a copy of your XE db creation script (in your XE's +$ORACLE_HOME/bin+ and called createdb.sh ) and modify that for your needs.
PS. even with a different SID, only a single XE instance can be run at a time - you can however have 2 different ones defined and then use one at a time (e.g. testing international settings, init param differences, etc.)

How can I uninstall Oracle 10g express edition(Western European).

Hi
I tried to install Oracle 10g express edition(Western European) in my laptop which is having windows vista home basic, but it was not installed properly so that I remove the related files in the program files, and i again tried to install Oracle 10g express edition(Universal) but it was not installed saying that already Oracle 10g express edition(Western European) edition was there and both Oracle 10g express edition(Western European) and Oracle 10g express edition(Universal) cannot co exist. can any help me regarding this one.........
I need to install Oracle 10g express edition(Universal) now.

Oracle XE can be uninstalled like other applications from Control Panel => Add/Remove Programs
my laptop which is having windows vista home basicYour Vista version is not certified, as you can see in Oracle Certification Matrices ( Oracle Database is certified to run on the Business, Enterprise, and Ultimate editions of Microsoft Windows Vista ).

Can't uninstall or reinstall oracle 10g express edition in w/server 2003

Hi,
I need help from all of you, i already install oracle 10g express edition in
windows server 2003 in D drive. but i can't remove because the oracle not in
the add remove program so i download the windows install clean up to remove
but after remove it still in the all program i still can start and stop the
database but can't go to the database home page.The error message (the install
cannot proceed as service OracleServiceXE is present on the system. Remove the
service , reboot the systemand retry the installation) can any one guide me to use
command prompt to remove.
My email address [email protected]
Thanks

Hi,
Perform the following steps, this will solve your problem and can go with new installation. :-)
(Only perform the steps 7.2 section and here is the link : http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25143/toc.htm#BABDJDCD
Manually Removing Oracle Database XE
If the deinstallation is interrupted, follow these steps to manually remove Oracle Database XE from your computer:
Step 1: Stop the Oracle Database XE Services
Step 2: Remove the Oracle Database XE Registry Editor Settings
Step 3: Update the System Variable Path
Step 4: Remove Oracle Database XE from the Start Menu and Desktop
Step 5: Remove the Oracle Database XE Directories
Step 6: Install and Run the Windows Installer CleanUp Utility
7.2.1 Step 1: Stop the Oracle Database XE Services
Follow these steps:
1. Open the Windows Services utility: From the Start menu, select All Programs, then Administrative Tools, and then Services.
2. If any of the following Oracle services exist and have the status Started, then select each of the services, and click Stop:
OracleXE
OracleXETNSListener
OracleJobSchedulerXE
OracleXEClrAgent
OracleMTSRecoveryService
3.
Exit Services.
See also the Microsoft online help for more information on stopping services.
7.2.2 Step 2: Remove the Oracle Database XE Registry Editor Settings
Follow these steps:
1.
Log on to Windows with Windows administrative privileges.
2.
Ensure that you followed the instructions under "Step 1: Stop the Oracle Database XE Services" to stop the Oracle Database XE services.
3.
Start the Registry Editor at a command prompt:
SYSTEM_DRIVE:\> regedit
4.
Go to HKEY_CLASSES_ROOT.
5.
Delete the following keys:
NEED TO CONFIRM THE XE-SPECIFIC ONES.
6.
Go to HKEY_CURRENT_USER\Software.
7.
Under Microsoft\Windows\CurrentVersion\Explorer\MenuOrder\Start Menu\Programs, delete the Oracle Database 10g Express Edition key.
8.
Go to HKEY_LOCAL_MACHINE\SOFTWARE and search for the ORACLE group key.
9.
Expand the ORACLE group key and then delete the KEY_XE and OracleMTSRecoveryService keys.
10.
Go to HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBCINST.INI.
11.
Expand the ODBCINST.INI key and remove the Oracle in XE key.
12.
Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services.
13.
Delete the following keys:
OracleServiceXE
OracleXEClrAgent
OracleXETNSListener
14.
Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog\Application.
15.
Delete the Oracle.xe key.
16.
Exit the Registry Editor.
17.
Restart your computer.
Thanks,
Rams...
Edited by: user10888288 on May 3, 2010 5:58 AM

Can't uninstall or reinstall oracle 10g express edition in windows server 2

Hi,
I need help from all of you, i already install oracle 10g express edition in windows server 2003 in D drive. but i can't remove because the oracle not in the add remove program so i download the windows install clean up to remove
but after remove it still in the all program i still can start and stop the database but can't go to the database home page. can any one guide me to use command prompt to remove.
Thanks

Hi,
I need help from all of you, i already install oracle 10g express edition in windows server 2003 in D drive. but i can't remove because the oracle not in the add remove program so i download the windows install clean up to remove
but after remove it still in the all program i still can start and stop the database but can't go to the database home page. can any one guide me to use command prompt to remove.
Thanks

Oracle 10g Express edition,can't visit database homepage

I have installed Oracle 10g Express edition without error meggage, It seems goes well ,but when I want to visit my database_homepage on http://127.0.0.1:8080/apex, I see this:
The page cannot be displayed
There is a problem with the page you are trying to reach and it cannot be displayed.
Please try the following:
Click the Refresh button, or try again later.
Open the Web site home page, and then look for links to the information you want.
If you believe you should be able to view this directory or page, please contact the Web site administrator by using the e-mail address or phone number listed on the Web site home page.
10061 - Connection refused
Internet Security and Acceleration Server
Technical Information (for support personnel)
Background:
The server you are attempting to access has refused the connection with the gateway. This usually results from trying to connect to a service that is inactive on the server.
ISA Server: csscisaser
Via:
Oracle is installed on my own computer.I think ISA should do nothing with it.And I have removed proxy setting in Internet exploer,but the error still happed.
I used netstat-a,and can find this:
proto :tcp
local address: myxxxxxx:8080
foreign address myxxxxxx:0
state : listening
does it mean my oracle http listener is started?

Open a command line and
- enter ping 127.0.0.1 ... should tell whether
connectivity is possible. If not, something is
blocking, and that something is usually a firewall.ping 127.0.0.1. I can connect to 127.0.0.1,very fast.but when I ping 127.0.0.1:8080 ,Can't get response.
enter ipconfig /all
enter and post output of lsnrctl status
There are so many output content.And you may see some #^$*#*&^$#@&* because I'm using Chinese version Oracle and OS.
IPconfig
Windows IP Configuration
        Host Name . . . . . . . . . . . . : cjis-e89f34e63f
        Primary Dns Suffix . . . . . . . :
        Node Type . . . . . . . . . . . . : Hybrid
        IP Routing Enabled. . . . . . . . : No
        WINS Proxy Enabled. . . . . . . . : No
        DNS Suffix Search List. . . . . . : xxxx.wan
Ethernet adapter 本地连接:
        Connection-specific DNS Suffix . : xxxx.wan
        Description . . . . . . . . . . . : Broadcom NetXtreme 57xx
roller
        Physical Address. . . . . . . . . : xx-13-72-7D-67-8B
        Dhcp Enabled. . . . . . . . . . . : Yes
        Autoconfiguration Enabled . . . . : Yes
        IP Address. . . . . . . . . . . . : 172.18.9.30
        Subnet Mask . . . . . . . . . . . : 255.255.255.0
        Default Gateway . . . . . . . . . : 172.18.9.252
        DHCP Server . . . . . . . . . . . : 172.18.18.9
        DNS Servers . . . . . . . . . . . : 172.18.18.9
        Primary WINS Server . . . . . . . : 172.18.18.9
        Lease Obtained. . . . . . . . . . : 2007年7月16日 15:51:15
        Lease Expires . . . . . . . . . . : 2007年7月24日 15:51:15
LSNRCTL status
正在连接到 (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
LISTENER 的 STATUS
别名                      LISTENER
版本                      TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Prod
ction
启动日期                  20-7月 -2007 11:19:13
正常运行时间              0 天 2 小时 17 分 10 秒
跟踪级别                  off
安全性                    ON: Local OS Authentication
SNMP                      OFF
默认服务           XE
监听程序参数文件          C:\oraclexe\app\oracle\product\10.2.0\server\network\
dmin\listener.ora
监听程序日志文件          C:\oraclexe\app\oracle\product\10.2.0\server\network\
og\listener.log
监听端点概要...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=cjis-e89f34e63f)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation
HTTP)(Session=RAW))
服务摘要..
服务 "CLRExtProc" 包含 1 个例程。
例程 "CLRExtProc", 状态 UNKNOWN, 包含此服务的 1 个处理程序...
服务 "PLSExtProc" 包含 1 个例程。
例程 "PLSExtProc", 状态 UNKNOWN, 包含此服务的 1 个处理程序...
服务 "XEXDB" 包含 1 个例程。
例程 "xe", 状态 READY, 包含此服务的 1 个处理程序...
服务 "XE_XPT" 包含 1 个例程。
例程 "xe", 状态 READY, 包含此服务的 1 个处理程序...
服务 "xe" 包含 1 个例程。
例程 "xe", 状态 READY, 包含此服务的 1 个处理程序...
['/pre']
Display contents of
C:\windows\system32\drivers\etc\hosts.['pre']
# Copyright (c) 1993-1999 Microsoft Corp.
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
#      102.54.94.97     rhino.acme.com          # source server
#       38.25.63.10     x.acme.com              # x client host
127.0.0.1       localhostMessage was edited by:
sailfish83

How get scott user database schema in oracle 10g express edition

hi
plz any on can tell me how to get the scott user database table details into the oracle 10g express edition
Iam created the user as scott but but i didn't get the table details
...plz give me the details correctly.

You will go into this path C:\oraclexe\app\oracle\product\11.2.0\server\rdbms\admin\scott.sql. You can get scott.sql script yhen you need to run the script like @C:\oraclexe\app\oracle\product\11.2.0\server\rdbms\admin\scott.sql. Otherwise you just copy the below script and save it into one file then run that file using @
Rem Copyright (c) 1990 by Oracle Corporation
Rem NAME
REM    UTLSAMPL.SQL
Rem FUNCTION
Rem NOTES
Rem MODIFIED
Rem    gdudey       06/28/95 - Modified for desktop seed database
Rem    glumpkin   10/21/92 - Renamed from SQLBLD.SQL
Rem    blinden   07/27/92 - Added primary and foreign keys to EMP and DEPT
Rem    rlim       04/29/91 -          change char to varchar2
Rem    mmoore       04/08/91 -          use unlimited tablespace priv
Rem    pritto       04/04/91 -          change SYSDATE to 13-JUL-87
Rem   Mendels     12/07/90 - bug 30123;add to_date calls so language independent
Rem
rem
rem $Header: utlsampl.sql 7020100.1 94/09/23 22:14:24 cli Generic<base> $ sqlbld.sql
rem
SET TERMOUT OFF
SET ECHO OFF
rem CONGDON    Invoked in RDBMS at build time.     29-DEC-1988
rem OATES:     Created: 16-Feb-83
GRANT CONNECT,RESOURCE,UNLIMITED TABLESPACE TO SCOTT IDENTIFIED BY TIGER;
ALTER USER SCOTT DEFAULT TABLESPACE USERS;
ALTER USER SCOTT TEMPORARY TABLESPACE TEMP;
CONNECT SCOTT/TIGER
DROP TABLE DEPT;
CREATE TABLE DEPT
       (DEPTNO NUMBER(2) CONSTRAINT PK_DEPT PRIMARY KEY,
    DNAME VARCHAR2(14) ,
    LOC VARCHAR2(13) ) ;
DROP TABLE EMP;
CREATE TABLE EMP
       (EMPNO NUMBER(4) CONSTRAINT PK_EMP PRIMARY KEY,
    ENAME VARCHAR2(10),
    JOB VARCHAR2(9),
    MGR NUMBER(4),
    HIREDATE DATE,
    SAL NUMBER(7,2),
    COMM NUMBER(7,2),
    DEPTNO NUMBER(2) CONSTRAINT FK_DEPTNO REFERENCES DEPT);
INSERT INTO DEPT VALUES
    (10,'ACCOUNTING','NEW YORK');
INSERT INTO DEPT VALUES (20,'RESEARCH','DALLAS');
INSERT INTO DEPT VALUES
    (30,'SALES','CHICAGO');
INSERT INTO DEPT VALUES
    (40,'OPERATIONS','BOSTON');
INSERT INTO EMP VALUES
(7369,'SMITH','CLERK',7902,to_date('17-12-1980','dd-mm-yyyy'),800,NULL,20);
INSERT INTO EMP VALUES
(7499,'ALLEN','SALESMAN',7698,to_date('20-2-1981','dd-mm-yyyy'),1600,300,30);
INSERT INTO EMP VALUES
(7521,'WARD','SALESMAN',7698,to_date('22-2-1981','dd-mm-yyyy'),1250,500,30);
INSERT INTO EMP VALUES
(7566,'JONES','MANAGER',7839,to_date('2-4-1981','dd-mm-yyyy'),2975,NULL,20);
INSERT INTO EMP VALUES
(7654,'MARTIN','SALESMAN',7698,to_date('28-9-1981','dd-mm-yyyy'),1250,1400,30);
INSERT INTO EMP VALUES
(7698,'BLAKE','MANAGER',7839,to_date('1-5-1981','dd-mm-yyyy'),2850,NULL,30);
INSERT INTO EMP VALUES
(7782,'CLARK','MANAGER',7839,to_date('9-6-1981','dd-mm-yyyy'),2450,NULL,10);
INSERT INTO EMP VALUES
(7788,'SCOTT','ANALYST',7566,to_date('13-JUL-87')-85,3000,NULL,20);
INSERT INTO EMP VALUES
(7839,'KING','PRESIDENT',NULL,to_date('17-11-1981','dd-mm-yyyy'),5000,NULL,10);
INSERT INTO EMP VALUES
(7844,'TURNER','SALESMAN',7698,to_date('8-9-1981','dd-mm-yyyy'),1500,0,30);
INSERT INTO EMP VALUES
(7876,'ADAMS','CLERK',7788,to_date('13-JUL-87')-51,1100,NULL,20);
INSERT INTO EMP VALUES
(7900,'JAMES','CLERK',7698,to_date('3-12-1981','dd-mm-yyyy'),950,NULL,30);
INSERT INTO EMP VALUES
(7902,'FORD','ANALYST',7566,to_date('3-12-1981','dd-mm-yyyy'),3000,NULL,20);
INSERT INTO EMP VALUES
(7934,'MILLER','CLERK',7782,to_date('23-1-1982','dd-mm-yyyy'),1300,NULL,10);
DROP TABLE BONUS;
CREATE TABLE BONUS
    ENAME VARCHAR2(10)    ,
    JOB VARCHAR2(9) ,
    SAL NUMBER,
    COMM NUMBER
DROP TABLE SALGRADE;
CREATE TABLE SALGRADE
      ( GRADE NUMBER,
    LOSAL NUMBER,
    HISAL NUMBER );
INSERT INTO SALGRADE VALUES (1,700,1200);
INSERT INTO SALGRADE VALUES (2,1201,1400);
INSERT INTO SALGRADE VALUES (3,1401,2000);
INSERT INTO SALGRADE VALUES (4,2001,3000);
INSERT INTO SALGRADE VALUES (5,3001,9999);
COMMIT;
SET TERMOUT ON
SET ECHO ON

Can I import a tablespace into Oracle 10g Express Edition

I am very new to Oracle 10g Express Edition. We have a server running Oracle Enterprise Edition and we have been creating a transportable tablespace to be imported into a few servers. This works fine for us. I would like to find out if I can import the tablespace into Oracle 10g Express Edition. Someone told me that I should be able to do that but I have no clue to how to do it. If this is possible, can someone tell where to find the information how to do this.
Thanks,
RJ

I finally tried it and I got the following errors:
IMP-00017: following statement failed with ORACLE error 721:
"BEGIN sys.dbms_plugts.checkCompType('COMPATSG','10.2.0.2.0'); END;"
IMP-00003: ORACLE error 721 encountered
ORA-00721: changes by release 10.2.0.2.0 cannot be used by release 10.2.0.1.0
ORA-06512: at "SYS.DBMS_PLUGTS", line 2004
ORA-06512: at line 1
IMP-00000: Import terminated unsuccessfully
Am I right that the server that I exported the tablespace is using Oracle 10.2.0.2.0 while Oracle Express is 10.2.0.1.0? I looked around and I did not see Oracle Express version 10.2.0.2.0 that I can download. Is there a patch or something to upgrade it?
Thanks,
RJ

How can i remove manually oracle 10g express edition from vista

Similar Messages

Maybe you are looking for