How can i remove moved and deleted old libraries?

I've moved a bunch of my libraries around, removed some, and have installed iphoto9 on a new mac. I love that in iphoto9 I can now create new libraries or decide which library to open. But, all of my older libraries are showing up in the list when I open with "option". Plus there are duplicates of the older libraries. I'm assuming there is a db or data text file somewhere that is populating this list. Does anyone know how I can remove old defunct libraries from showing up in the list?
Thanks,
Bob

Thanks Terrence. I didn't even realize all these old files still had album xml files. I appreciate your help.
Thanks,
Bob

Similar Messages

  • How can i remove videos and music that are not on my ipad mini but are still taking up space and are showing that they are there even after i've deleted them?

    how can i remove videos and music that have been deleted from the ipad but are still showing in settings as still being on the ipad?

    I believe that I have the same issue with iPad Mini with Retina Display, iOS 8.1. No matter which way I delete videos from my iPad, they will still show as "deleted", yet the space is not cleared up. I tried restore and then a full restore (clean setup as a new iPad) and it still does this to me. I can solve it by doing a restore each and every time I download a video and delete it. Rather frustrating. Has been a problem since day 1 of iOS 8. I'm yet to try the power+home button reset. It may very well work, but I am surprised that a "fresh setup" of an iPad didn't resolve it from ever occurring.

  • How can I remove asm and ocr installation in AIX?

    Hi,
    I try to install single instance with using ASM in AIX.
    But I did not make successfully.
    Now I want to remove ASM and OCR installation then
    I will plan to make new clear installation.
    How can I remove asm and ocr ??
    Or How can I control my removing is fully correct ?

    1) ASM Instance Clean-Up Procedures
    Stop all of the databases that use the ASM instance that is running from the Oracle home that is on the node that you are deleting.
    On the node that you are deleting, if this is the Oracle home which from which the ASM instance runs, then remove the ASM configuration by completing the following steps. Run the command srvctl stop asm -n node_name for all of the nodes on which this Oracle home exists. Run the command srvctl remove asm -n node for all nodes on which this Oracle home exists. If there are databases on this node that use ASM, then use DBCA Disk Group Management to create an ASM instance on one of the existing Oracle homes on the node, restart the databases if you stopped them.
    If you are using a cluster file system for your ASM Oracle home, then ensure that your local node has the $ORACLE_BASE and $ORACLE_HOME environment variables set correctly. Run the following commands from a node other than the node that you are deleting, where node_number is the node number of the node that you are deleting:
    rm -r $ORACLE_BASE/admin/+ASMnode_number
    rm -f $ORACLE_HOME/dbs/*ASMnode_number
    If you are not using a cluster file system for your ASM Oracle home, then run the rm or delete commands mentioned in the previous step on each node on which the Oracle home exists.
    2) Deleting an Oracle Clusterware Home Using OUI in Silent Mode
    !!! Oracle recommends that you back up your voting disk and OCR files after you complete the node deletion process.
    If you ran the Oracle Interface Configuration Tool (OIFCFG) with the -global flag during the installation, then skip this step. Otherwise, from a node that is going to remain in your cluster, from the CRS_home/bin directory, run the following command where node2 is the name of the node that you are deleting:
    ./oifcfg delif –node node2
    Obtain the remote port number, which you will use in the next step, using the following command from the CRS_home/opmn/conf directory:
    cat ons.config
    From CRS_home/bin on a node that is going to remain in the cluster, run the Oracle Notification Service Utility (RACGONS) as in the following example where remote_port is the ONS remote port number that you obtained in the previous step and node2 is the name of the node that you are deleting:
    ./racgons remove_config node2:remote_port
    On the node to be deleted, run rootdelete.sh as the root user from the CRS_home/install directory. If you are deleting more than one node, then perform this step on all of the other nodes that you are deleting.
    From any node that you are not deleting, run the following command from the CRS_home/install directory as the root user where node2,node2-number represents the node and the node number that you want to delete:
    ./rootdeletenode.sh node2,node2-number
    If necessary, identify the node number using the following command on the node that you are deleting:
    CRS_home/bin/olsnodes -n
    Perform this step only if your are using a non-shared Oracle home. On the node or nodes to be deleted, run the following command from the CRS_home/oui/bin directory where node_to_be_deleted is the name of the node that you are deleting:
    ./runInstaller -updateNodeList ORACLE_HOME=CRS_home
    "CLUSTER_NODES={node_to_be_deleted}"
    CRS=TRUE -local
    Deinstall the Oracle Clusterware home from the node that you are deleting using OUI as follows by running the following command from the Oracle_home/oui/bin directory, where CRS_home is the name defined for the Oracle Clusterware home:
    ./runInstaller -deinstall –silent "REMOVE_HOMES={CRS_home}"
    Perform step 9 from the previous section about using OUI interactively under the heading "Deleting an Oracle Clusterware Home Using OUI in Interactive Mode".

  • My ipad2 is asking old id password, when i go to forget password link for that id then I am not getting any mail to reset the same. Please help how can i remove or change the old id.

    my ipad2 is asking old id password, when i go to forget password link for that id then I am not getting any mail to reset the same. Please help how can i remove or change the old id.

    You cannot remove or change the old ID. This is Find My iPhone Activation Lock. You need to recover the credentials for the Apple ID originally used to activate the iPad.
    Check your spam and junk folders.

  • A phantom folder with the name of a folder that held photos has appeared in my finders places list.  I can't choose it to delete it.  it won't move.  It can't be found in a search.  How can I choose it and delete it?

    a phantom folder with the name of a folder that held photos has appeared in my finders>places list.  I can't choose it to delete it.  it won't move.  It can't be found in a search.  How can I choose it and delete it?

    Can you drag it off holding down the CMD key?
    Do a search for it with EasyFind  (try different settings in "Operator")
    http://www.devontechnologies.com/products/freeware/

  • How can i remove apps and notifications?

    how can i remove apps and notifications?

    To remove an app from your phone, hold down on the app until it wiggles and hit the X.
    For notifications, settings - notifications - the rest is self explanitory.

  • Hi when i click on mozilla firefox it keeps coming up saying restore session why is this every time i go on firefox how can i stop this and delete it all together

    hi when i click on mozilla firefox it keeps coming up saying restore session why is this every time i go on firefox how can i stop this and delete it all together

    When you quit firefox with tabs and windows open it "remembers".  When you start Firefox it tries to restore the tabs and windows you had open.
    You may also want to check the preferences for Firefox:

  • HT1688 I made the mistake of downloading my entire I tune library to my phone how can I remove it and  and replace  with playlist .

    i put my entire itunes library on my phone how can i remove it and replace with playlist

    Open itunes, connect iphone, select what you want on the iphone, sync

  • How can i remove duplicates and certain contacts on Outlook and my iPhone?

    I use the Outlook mail and contact program on my PC with a Windows 7 operating system, which I sync with my iPhone5.
    After installing the iCloud program, I now have duplicate and sometimes quadruplicate contacts.
    1. How can I remove the duplicates?
    2. How can I be selective about which contacts I want to share on iCloud, in other words, can I share only certain contact categories/folders like work contacts or personal contacts?
    3. How can I "uncloud" specific contacts and have them appear only on my computer and not on my iPhone?
    4. Is there a way to restore accidently deleted contacts?
    Thanks for any help you can give.

    Connect the device to the computer.
    Select what is desired to sync.
    Sync.

  • How can I remove Babylon and put Google into toolbar?

    How can I remove Babylon toolbar and put Google´s into my Firefox toolbar?
    Thanks

    Babylon: Removal (see [https://support.mozilla.com/en-US/questions/860950 Q860950])
    * How do I uninstall Babylon <br>http://support.babylon.com/index.php?_m=knowledgebase&_a=viewarticle&kbarticleid=79
    *How do I fully remove Babylon <br>https://support.mozilla.com/questions/746530

  • How can i remove Go and Exit buttons as well as Advanced text from OVS help

    Hi Gurus,
    Once i have impleted OVS code in my webdynpro, i am able to see Go and Exit buttons as well as Advanced Search Text, but i do not want see buttons and Text in my screen, How can i remove the same?
    Thanks
    Venkat.

    Hi Venkat,
    Create a context attribute say Va_Attr1 in the parent view, popup view and component controller. Map both the context in 2views to the component controller. So, the context variable which is bound to input field is passed via component controller to popup view and is stored in there as context attribute.
    Now, you can just get the context attribute value set in the input field in parent view and use it for search in popup view.
    In order, to have tables with multi-selection. Goto table properties and in selectionMode, set multiNoLead instead of auto.
    Then in the wdDoInit() of popup view put,
    wdContext.node<Table>().setLeadSelection(-1);
    Loop through the table node and find out at what all index rows are selected for table using
    int count=0;
    String s = "";
    for(int i1=0; i1<wdContext.node<Table>().size();i++){
       if(wdContext.node<Table>().isMultiSelected(i1)==true){
        count = count+ 1;
        s=s+ i1;
    count will give you no. of rows selected which would be equal to s.length.
    s.CharAt(0) will give the first row selected and similarly
    s.CharAt(n) will give the nth row selected
    Using Integer.parseInt(s.CharAt(n)) will give you back the index int type where s.length will give No. of rows selected.
    For rows which are selected append the text values of all those separated by ";" using
    StringBuffer strBf = new StringBuffer();
    for(int i=0; i< <No. of rows selected>; i++){
    if(i=0){
    strBf.append(wdContext.node<Table>().get<Table>ElementAt(Integer.parseInt(s.CharAt(i))).get<Text>());
    }else{
    strBf.append(";" + wdContext.node<Table>().get<Table>ElementAt(Integer.parseInt(s.CharAt(i))).get<Text>());
    Finally when 1 or more row is selected and needs to be populated in the input field then set in the context attribute which will pass the value through context mapping using
    wdContext.currentContextElement().setVa_Attr(strBf.toString);
    Regards,
    Tushar Sinha

  • How can I remove spyware and malware from my mac ?

    How can I remove rootkit.spyware and Trojan.malware from my mac ?
    Since a few days, some webpages open by themselves and it look like the security of my computer is compromised.
    I have a Mac OS X 10.9.5
    Thanks for your help !

    Remove Browser Pop-up Problems
         AdwareMedic
         Adblock Plus 1.8.9
         remove adware that displays pop-up ads and graphics on your Mac

  • I've created a movie but at the end there is an invisible audio clip that keeps playing. How can I select it and delete it?

    Hello everyone,
    This is Karie Garnier in British Columbia, Canada.
    I'm new to FCPX.
    I've created a 20 minute movie, but at the end of the movie, there is an invisible audio clip that keeps playing.
    How can a video clip be playing and making sounds, when it doesn't appear in the timeline? and ...
    How can I select this invisible audio clip and delete it?

    I think you could be right, that it's an old render file that's got stuck.
    By the time I finished this movie my 500 GB hard drive was 99.9% full and
    FCP started acting wierd, so I suspect you are right.
    I have since upgraded my hard drive to one 1000 GBs but when I play the movie the
    glitch remains.
    Can you please tell me:
       a) How can I fix the old render file so that it is no longer stuck?  ... and
       b) How do I take a screen shot of the timeline?

  • Catalog is jacked,  How can I remove it and start over

    My catalog is really in bad shape, I have tried to remove it, and can find no option to do so.  I have tried to reconnect all missing files, and it runs through about 25,000 pictures and when it is done, nothing is changed. most of my directores are empty, if I have any photos displayed they are showing question marks, and only about 1/10 of the photos are actually connected.   I have tried to get photos and videos from folders but it does not help. (similar results to reconnecting.
    This program is worthless with a bad catalog.  I tried to un install the entire program and much to my dismay when I resinstalled, it, there was my bad catalog!!!!.
    I tried to delete files with catalog in my pictures\pictures directory, but his  had no impact.
    Please help!

    Thanks. PE7.  Now I figured this one out, but it took a while. I tried to use the optimize and the repair functions, but still had a very corrupt file.  I finally realized that it would not let me delete my catalog until a created another one (seems like it will not let you delete your only catalog).  Once I created a new one, I was able to delete the old one.  Then with the new empty catalog, I was able to rebuild it so it only looked at my pictures directory.  Took about 1 hour or so to complete 20 k of photos, but now I am good.

  • How can I remove red and green lines from a footage?

    I cannot remove red and green lines without removing the title graphics that I have in my footage. How can I solve the problem and keep the graphic there?

    @Ann Benns
    I will try to do that. Thank you!
    @Bill Hunt
    Well, the raw footage is an avi filmed with a handycam. This error occurred
    the next day after I finished the editing in Adobe Premiere cs5. It might
    be something wrong with the title graphics that I use, but still if there's
    a solution I would like to find it out as this error occurred before.
    Cristina

Maybe you are looking for