How can I remove old wireless networks as a choice on my iphone?

I just picked up a new time capsule and i'm using my old time capsule to backup just one mac, just not wirelessly.  I need the rest of the Macs and Iphones in the house to no longer default to the old time capsule.  How can I delete networks I no longer use?

You're welcome.
This link provides instructions.
http://kb.mit.edu/confluence/display/istcontrib/Mac+OS+X+-+Remove+Preferred+Wire less+Networks

Similar Messages

  • How can I delete a wireless network from my MacBoork Ai

    How can I delete a wireless network from my MacBoork Air.
    I had set up a WEP Network but I need to set up a WPA (personal) network now and i cant seem to change the WEP network to a WPA2 network.
    Thank you for any help you can provide me.
    LShaps

    The MacBook Air will autodetect WEP and WPA security changes and should allow you to reconnect again. If the password stored in the Mac is wrong, it will ask you to enter it again.
    With that said, to forget a network do the following:
    - Go to the Apple Menu and select System Preferences
    - Click on the Network icon
    - Highlight the Airport / WiFi entry (sepending on 10.6 vs 10.7)
    - Click the Advanced button at the bottom
    - Make sue the Airport / WiFi tab is selected
    - Click on the network name you want to forget
    - Press the minus button at the bottom of the list.
    You may also want to consider restarting if you are having this issue.

  • HT203756 How can I remove 'old' or 'incomplete' backups from iCloud?

    How can I remove 'old' or 'incomplete' backups from iCloud? 
    When I attempted, the iPhone 6+ message asked if I wanted to remove ALL of the backups... without giving me the option of selecting the specific one I wanted to remove.
    I had performed 'backups' of my old iPhone, but, when I tried to RESTORE to the REPLACEMENT iPhone, at least one of the iCloud backups shows 'incomplete'.  There was no 'error' on the original iPhone...when it 'failed' to complete the backup.
    Now, I would like to 'clear up' the 'storage' on the iCloud, but am unable to select specific ones. I can either keep all instances or shut off iCloud Backup which would, according to the message, remove/delete ALL of the BACKUPS.
    This shouldn't be this difficult.....

    I too wondered how you remove apps from iCloud.  Judging by the quantity of questions, comments, suggestions and replies (some rather rude) there is a clear need for Apple to make their literature a lot clearer.  The page describing what iCloud backs up refers to "app data" as an item which is backed up.  To the uniniated this might mean the app program but it seems not.  The app is "bought" via iTunes or the App Store and details of your purchase (free or otherwise) is held there separately on the server.
    It would be nice however to be able to remove the reference to junk I have downloaded and decided I don't want so that it doesn't appear on the purchased apps listing!  Apple please note this.
    It must be remembered that Apple products come pitifully supported by manuals "out of the box" on the assumption that it is so easy to use the product that no explanation is needed.  They forget that most buyers of Apple products (me included) don't know (and don't want to know) how they work, so when something is not obvious they are required to plough through Lord knows how many web pages of "knowledge base" material until they find an answer.
    All I can add is that it is worth spending time reading the multiitude of discussion threads before asking the question yet again...

  • How can i access my wireless network?

    how can i access my wireless network at home?

    Does your iPad see your WiFi network - Settings>WiFi>Tap your network name, enter your password and tap join.
    If the iPad isn't seeing the network, try rebooting the router - unplug it for about 30 seconds and then plug it in again.

  • How can I remove old Bonjour in order to install iTunes?

    5.0?
    how can I remove old Bonjour files and registry in order to install iTunes to update my ipad to ios 5.0?

    You simply need to correct your birth date? Don't create a new account.
    Go to https://appleid.apple.com/
    Sign in with your Apple ID and password. Choose "Password and Security" from the left column, answer your security questions, and fix your birth date under Select your birth date.
    Save
    Done.

  • How can I remove old devices from my iTunes-Mediathek?

    How can I remove old devices from my iTunes-Mediathek?

    That's a very general question, so here are two documents from Apple for using automatic syncing and manually managing content.
    Sync your iPhone, iPad and iPod with iTunes using USB - Apple Support
    Manage content manually on your iPhone, iPad, and iPod - Apple Support
    If your question is actually about removing content (you know how to add content), you are probably using the manual method to add content, and don't know how to manually remove content.  For iTunes 12, on the horizontal bar that goes across the iTunes window (near the top), click the Music button near the left end.  Near the middle of same bar, click Playlists.  The sidebar appears along left side of window and Devices, your iPod is listed.  Click the small triangle to the left of the iPod's name, to drop down its content list (indented below iPod).  Click Music there.  To the right, the list of songs on the iPod is shown.  Select the song you want to remove and press Delete on the keyboard.  You can do this with one or more songs selected.
    You can also use the iPod's "management" screen.  Select the iPod in iTunes, so that you see its Summary settings screen.  In the sidebar, under On My Device, click Music.  This is the same as on the "content list" described above.

  • How can I remove the at&t  contract restrictions and make my iphone internationally unlocked as i was scammed in buying it

    How can I remove the at&t  contract restrictions and make my iphone internationally unlocked as i was scammed in buying it

    no i am leaving in egypt and we have no at&t here theguy who soled it said it works and he put my sim in it and it was working tillyesterday then i upgraded it and it stopped realized what i bought after a month.And i don’t like the dilemma i am willing  to pay whatever to solve thismess i am in

  • HT4259 How can I extend a wireless network from a 2Wire modem by usingan Airport Express? Years ago I could do this just by plugging in the (old) Airport Express. TIA Travelmonger

         How can I extend a wirelss network from a 2Wire modem using an Airport Express? Some years ago using the old Express I was able to do so simply by plugging on the Express witha minimum of tweaking. Still the same?
    TIA
    Travelmonger

    Still the same?
    Unfortunately, no.
    Apple's newer "Extend a wireless network" feature was designed to only work with other Apple products, so it would be extremely unlikely that it would work with a 2-Wire device if you plan to extend using wireless only.
    If you plan to connect the AirPort Express to the 2-Wire device using a wired Ethernet connection, the Express can be configured to provide more wireless coverage that way.

  • How can I remove old calendar names from the iTunes sync list?

    I gave my calendars new names as part of reducing the total number of calendars in my iCal, and now iTunes still lists the old calendar names as well as the new ones in its "selected calendars" list, even though these names are no longer present in my iCal nor on my iPod Touch. How can I remove the old calendar names?

    The "genius" folks at the Apple Store lived up to their names. The key was to reset the iSync history in the iSync Preferences.

  • How can i remove duplicates and certain contacts on Outlook and my iPhone?

    I use the Outlook mail and contact program on my PC with a Windows 7 operating system, which I sync with my iPhone5.
    After installing the iCloud program, I now have duplicate and sometimes quadruplicate contacts.
    1. How can I remove the duplicates?
    2. How can I be selective about which contacts I want to share on iCloud, in other words, can I share only certain contact categories/folders like work contacts or personal contacts?
    3. How can I "uncloud" specific contacts and have them appear only on my computer and not on my iPhone?
    4. Is there a way to restore accidently deleted contacts?
    Thanks for any help you can give.

    Connect the device to the computer.
    Select what is desired to sync.
    Sync.

  • How can i removed account from my ipad is linked to an iphone ide

    i restored my ipad n i can't activate now so how can i remove the other owner  account can them help me

    Import you music into iTunes (File>Add to Library...), then sync to your iPhone (connect to iTunes), on Music tab select what to sync.  If you're having trouble connecting your iPhone to iTunes see: http://support.apple.com/kb/TS1538 (windows) or http://support.apple.com/kb/TS1591 (mac).

  • How can I extend a wireless network with my AirPort Extreme Base Station?

    Today I purchased a brand new, dual-band base station to replace my Belkin N router, as I have had a handful of firewall, coverage, and other networking problems in my house lately. First off, I really like this router and it was very easy to setup. My MacBook Pro could use both bands and established a 300 Mbit/s link very quickly. After tweaking various settings to my liking, I was also able to maximize the connections on many of my non-Apple machines and devices. I noticed that the range of its network was better than my Belkin's, but unfortunately, it failed to completely saturate the area sufficiently. Since the Belkin still works well enough, I was hoping I could bridge them together one way or the other.
    The Belkin router does not support any bridge mode that I know of, but the AirPort Extreme should be able to join a wireless network and then extend that over WiFi and Ethernet, correct? I would like to place them at opposite ends of my home so I can get strong WiFi signals everywhere inside. However, when I try to get the base station to connect to my preexisting WiFi connection, it tells me that I can't extend the network and fails to join.
    So is this possible? And if it is, how would I go about setting it up? I know it would probably be easier if I had a simple range booster such as an AirPort Express, but I didn't buy one while I was at Fry's since I hoped I could make use of the older Belkin. This is its product page, if needed. Thanks for any suggestions.
    -MacUser

    The Belkin router does not support any bridge mode that I know of, but the AirPort Extreme should be able to join a wireless network and then extend that over WiFi and Ethernet, correct?
    Sorry, but no. The AirPort Extreme Base Station cannot "join" a network like the AirPort Express or Time Capsule, but you wouldn't want to do this anyway because in this configuration these devices will only perform as wireless clients ... not routers.
    Instead, the AirPort Extreme can either be extended or can extend another 802.11g or 802.11n AirPort ... or a very very few non-AirPort devices.
    One option for your Belkin would be to connect it to the AirPort Extreme by Ethernet but this may not meet your requirements or be a desirable situation. Otherwise, you would need to get another AirPort to extend your current one.

  • How can you remove old conversations from the iMac. Even when I remove them they return when I start a new conversation with the same person. Only happens on iMac with the Beta iMessage program

    How do you remove an old conversation using  the Beta iMessage on an iMac. When I open a new conversation with the same person the old conversation comes back

    Hi,
    Previously iChat had tried a Last Chat/IM option when using Saved Transcripts - which itself was an option.
    iChat has also tried "Saving" the Last Chat by leaving a Chat window open and using something similar to the Lion method of showing an app in the state is was closed in.
    In Messages the option to Save Transcripts has been removed and Chats or all types are saved as a matter of course.
    What this tends to mean for your iChat style Buddy Chats is that it opens all the Transcripts  for that buddy as a sort of History you can scroll back through if you want  (I have  some Buddies with saved chats gong back to 2004)
    With the Syncing of iMessages with iPhones and iPads (or Touches) then it seems this works slightly differently.
    Although you can delete the chat and the contents of the Chat as separate action it is true that in the Beta as soon as you connect to the same Contact that the contents of the previous chats are shown to you.
    I have found that Messages stores a data base of info on iMessages in Your Home Folder/Library/Messages
    I have found that deleting this chat-db removes the "History" that keep popping up.
    By default the Saved "iChats" are also stored in the Home Folder/Documents/iChats (At least this is the default place iChat used and they go to the same iChats folder where ever you had it)
    Some people claim removing iMessages saved here stops the "History" reappearing.
    In Lion the only access to the Home Folder/Library is via the Finder's Go Menu and hiding down the ALT key
    10:00 PM      Sunday; June 10, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.4)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.7.4),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • How can I expand my wireless network with a Time Capsule and Airport Express?

    My entire house is wired for ethernet access (2 floors).  I have a Time Capsule on the 2nd floor that reaches the entire house except for one room. 
    In this one room I have an ethernet port plugged into an Airport Express. 
    The problem I encounter is that I have two separate wifi networks with two separate names.  I realize I can extend the wireless network on the 2nd floor to the 1st floor but I can only do this wirelessly to my knowledge, and the entire problem is that the signal doesn't reach the front room.  Also, there is really no place in-between that the AE can be placed to extend the reach.  The building is concrete and steel, I think that has a lot to do with the problem.
    My question is: Can I have two wireless routers (connected to the same home network via ethernet) broadcast the same wifi network?  I also have a SONOS system that further complicates things, I'm afraid.  Would it help if I drew some sort of diagram?
    Thanks!

    Your network is not working as you describe.. or I have misunderstood the layout..
    What is the broadband type? Modem is where? What is the main router?
    From your screen shots the main router is the airport express that covers one room which seems wrong.
    Why isn't the TC the main router? or both bridged.. if you go back and look at the apple document.. one or both apple routers are in bridge mode..
    You are having issues with setup .. half of which is caused by v6 airport utility.
    What OS are you running? Please install 5.6 utility.. do it.. do it now!!
    Easy for Lion.
    http://support.apple.com/kb/DL1482
    Messy but possible for ML.
    How to load 5.6 into ML.
    1. Download 5.6 for Lion.
    http://support.apple.com/kb/DL1482
    Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
    2. Download and install unpkg.
    http://www.timdoug.com/unpkg/
    Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
    You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.

  • How can I extend my wireless network with the Time Capsule?

    I recently bought a Time Capsule and set it up, backed up all my data, etc. It is currently plugged in to my AT&T Uverse wireless router via a LAN CAT5e cable. I am wondering if it is possible to wirelessly extend my preexisting network with the Time Capsule so I can move it somewhere else in my house where it can still pick up the signal but extend it. And if possible, how so? Or does it ALWAYS have to be wired'connected to my router for the internet to work?
    Thanks in advance.

    I am wondering if it is possible to wirelessly extend my preexisting network with the Time Capsule so I can move it somewhere else in my house where it can still pick up the signal but extend it.
    Sorry but no.  Extending using only wireless would require that the Time Capsule connect to another Apple router that is producing the wireless network.
    Another way of saying the same thing is that you must have two Apple routers to be able to extend the signal wirelessly.

Maybe you are looking for

  • Trouble with homepage pic

    I just updated my iPhone 5 to the new iOS 7 and I love it. The only thing that Im having a problem with is setting a home page photo.  When I try to select one of mine to use, it zooms in on the picture when it says move and scale.  It wont let me zo

  • ORA-19612: datafile 0 not restored due to missing data

    Hello, I'm testing a restore of the controlfile. The database is in archivelog mode and autobackup is set to ON. I successfully did a full backup and backup as copy database. To test I did the following: - note the DBID - shutdown the database - rena

  • Webdynpro components within SRM

    Hello all     I want to access the webdynpro components within SRM Portal . How do I do that?   Regards, Sanjeet

  • Mac OS Lion Kernel Panic after RAM upgrade

    Hi everyone. Yestarday I upgraded RAM of my MBP from 4GB to 8GB. Note 4GB wasn't native, when I bought MBP it had 2GB. Both RAM (2x2GB and 2x4GB) is Samsung. For last day I had 3 Kernel Panic!!! Never got it BEFORE. I run memory test and it showed th

  • PowerMac running Leopard wakes up but the Apple display doesn't

    I installed Leopard 10.5.1 on my old Dual G4 MDD (2x867MHZ). My monitor is an Apple Display 20". Whenever the system goes to sleep and I try to resume, the computer comes up, but not the display, which remains in suspended mode. The computer is fully