How can I remove  pages 5.0 to work with Pages 09 again?

How can I remove  pages 5.0 to work with Pages 09 again?

Welcome to Apple Support Communities
When you upgraded to Pages 5.0, the Mac App Store kept Pages '09 in case you want to use it again.
To access to Pages '09, open a Finder window, choose Applications in the sidebar and open the old Pages version. To access to it quickly, you can drag the icon to the Dock.
I do not recommend you to remove Pages 5.0 or the Mac App Store will be always asking you to upgrade Pages. Also, Apple will add more features to Pages 5.0 in the future. See > http://support.apple.com/kb/HT6049?viewlocale=en_US&locale=en_US

Similar Messages

  • I accidently deleted my motion templets folder for fcpx, how can i get it back so it works with fcpx again?

    hey guys.
    i was cleaning my movies forlder out, and accidently deleted my motion templetes folder.
    i havent figured out / found a way to recreate the folder and link it back to fcpx.
    would really love some help on this as i cant use any of the custom plugins ive got.
    thanks

    Do you use Time Machine?
    If so you should be able to retrieve an old version of it.

  • HT203687 How can I remove apps from my iPhone 5 home page?

    How can I remove apps from my iPhone 5 home page?

    Tap and hold an app until they all start to wiggle, then tap the black "x" on the apps you want to delete from your phone, or drag them to the edge of the screen if you want to move them to another screen rather than deleting them.  Finish by tapping the home button.

  • I have Iphone 4, version 4.3.3 (8J2) How can i remove the brightness toolbar from the main page, below the applications above the shorcuts?

    I have Iphone 4, version 4.3.3 (8J2) How can i remove the brightness toolbar from the main page, below the applications above the shorcuts?

    There is no brightness toolbar unless your iPhone is jailbroken.  If so, you can try to restore to remove the JB.
    The only place brightness exists is under Settings.

  • HT201363 My iPhone, iPad and iPod are all associated with the same Apple ID.  How can I remove the iPod and associate it with a new Apple ID without affecting the data on the other devices (note: there is no data on the iPod I want to keep)?

    My iPhone, iPad and iPod are all associated with the same Apple ID.  How can I remove the iPod and associate it with a new Apple ID without affecting the data on the other devices (note: there is no data on the iPod I want to keep)?

    Very simple.  Turn off Find my iDevice, then  Tap Settings, General, Erase, Erase all content and settings.

  • I locket laptop with find my phone program but now I forgot the password? How can I remove that password, I locket laptop with find my phone program but now I forgot the password? How can I remove that password

    I locket laptop with find my phone program but now I forgot the password? How can I remove that password, I locket laptop with find my phone program but now I forgot the password? How can I remove that password

    Repeating yourself 4 time does not make things any clearer
    Read posts over on the right under the heading More Like This
    Allan

  • How can iWeb hit counter be made to work with non-Apple server?

    How can IWeb hit counter be made to work with non-Apple server?

    This tutorial describes how to add an alternative counter to an iWeb page: iW05 - Adding a Graphical StatCounter as an HTML Snippet to an iWeb Page
    OT

  • I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter  plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio

    I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter  plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

    For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
    For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
    See: 
    http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html  
    Be well...

  • How can use my Wireless Location Appliance to work with RF ID's?

    How can use my Wireless Location Appliance to work with RF ID's for Asset Tagging.
    It seems Smartcard used for ID cards have a small RF ID, can I use this for Asset Tagging?
    Thanks in Advance

    There are two kinds of RFID tags: Active tags, which have a battery or other internal power source, and passive tags, which have no power source and work by reflecting the energy from an RFID scanner (basically). At the energy levels and distances used for WiFi location detection, passive tags will not return a detectable signal.
    Take a look at http://www.aeroscout.com/ for more info on WiFi RFID tagging.

  • I have an older G5 tower Power PC and the OS 10.5.8, but the firefox and safari browers are no longer supporting this computer. How can I download an older version that works with this computer?

    I have an older G5 tower Power PC and the OS 10.5.8, but the firefox and safari browers are no longer supporting this computer. How can I download an older version that works with this computer?
    Or what is the newest OS system I can load onto this computer?
    I think it is from 2006

    Hello,
    10.5.8 is the highest OSX it can run.
    TenFourFox is the most up to date browser for our PPCs, they even have G4 & G5 optimized versions...
    http://www.floodgap.com/software/tenfourfox/
    I'd avoid vesrion 24 though, as it no longer supports plug-ins like Flash.
    SeaMonkey seems pretty fast also, with many options...
    http://www.seamonkey-project.org/
    http://www.seamonkey-project.org/releases/
    Might also look into iCab & OmniWeb versions.

  • How can I remove a Disabled Extension not compatible with Firefox 4.0.1? I just want to remove it... I don't want to wait for a compatible update. Why can't I remove it?

    When I upgraded from 3.XX to 4.0.1, it informed me that 2 extensions were not compatible and it never gave me the option to remove them. Firefox 4.0.1 disabled them and now I'm not able to remove them.
    Also they were added by Acrobat Pro X (Adobe Acrobat - Create PDF 1.0) and Nokia Ovi Suite (Firefox Synchronisation Extension 7.3.4.51).
    These extensions won't probably be updated unless they update the software that installed them. With this said, How can I remove the disabled extensions? Why it doesn't give me a button to remove them to start with?

    I think it's not the problem of compatibility. Extensions installed into Windows registry won't have a remove button ( or it's greyed out ). For these extensions, you can have a look into these keys:
    HKEY_CURRENT_USER\Software\Mozilla\Firefox\Extensions\
    HKEY_LOCAL_MACHINE\Software\Mozilla\Firefox\Extensions\
    If you are under a 64bit OS as I am, you may also try this key:
    HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Mozilla\Firefox\Extensions\
    And you may find the registry entries corresponding to the extensions you want to remove. Just export them to a backup.reg, then delete these entries. Firefox will do the rest, but it seems that fx still leaves extensions.rdf untouched. You can also delete the RDF entries corresponding to those extensions inside extensions.rdf
    cf: http://kb.mozillazine.org/Uninstalling_add-ons#Windows_Registry_extension
    BUT the Wow6432Node key wasn't mentioned in the above article
    I had to search the registry to find out the entry corresponding to a Fiddler2 extension, then I found the Wow6432Node key. I also saw the Nokia Ovi Suite entry beside the Fiddler2 entry.
    Hope it helps.

  • How can you configure a WD external to work with Time Machine??

    I have an 1TB external WD MyBook drive that is connected to my network through my Linksys wireless router and am trying to figure out how to format the drive to use with Time Machine.
    I currently use the drive to store files from both my PC and my MacBook but can't seem to select the drive to use with Time Machine. I figured that I could just format the drive through the Disk Utility program, but the drive doesn't show up in Disk Utility. This may be because it is a drive connected through my router and not directly to my MacBook?!
    Here are a few questions...
    Any ideas on how to format the drive so it will work with Time Machine?
    Once formatted to use with TM, can I still use the drive to store other files from both my Mac and PC? or do I need to partition for this??
    Is it possible to set up an automatic backup schedule that will happen via my home wireless connection?
    Thanks in advance,
    Todd.

    You cannot use the drive with TM as you have it set up. TM will not work with a networked drive except a Time Capsule or a USB drive connected to an Airport Extreme Base Station (current version.)
    If you wish to use this drive for TM backups it must be connected directly to the computer. Other computers on the network can access the drive for TM backups if you turn on file sharing for the drive (select drive, press COMMAND-I, check the box labeled "Shared Folder," click on the Enable button.) The shared drive will have to be mounted on the other computers in order for them to use it as a TM backup drive.

  • How Can I Remove the Home Link on the Main Page

    I am using PT 8.49 and I am creating a custom page where the only options I'd like to show on the page are my custom menu option and "Sign out" at the top right. I'd like to remove the "Home" link on the top right menu because I am doing the selection for them. I don't want them to be able to go back to the Home menu once they've entered my custom page. I have everything working the way I'd like except that I cannot get rid of the "Home" link. Can anyone help with that?
    I am also using a template in portal called HOMEPAGE_DESIGNER_TEMPLATE as this causes the page to display without the left menu, as I want it to be.
    Thanks for your help!

    Restore the default home page
    * https://support.mozilla.com/en-US/kb/How%20to%20set%20the%20home%20page#w_restore-the-default-home-page
    Now, set a single web site as your home page
    * https://support.mozilla.com/en-US/kb/How%20to%20set%20the%20home%20page#w_set-a-single-web-site-as-your-home-page
    Check and tell if its working.

  • How can I remove redundant entries it the "Open With" pull down?

    In Mountain Lion, now, when I right click on a document or image and move down to "Open With" I get a triple redundant (long) list of applications that might do the task. How can I purge the list of all the duplicates?  Part of the problem COULD be that I have three operating systems on my machine,(different spinning disk volumes) snow leopard, lion and mountain lion.  SL and Lion, are not spinning now, but they have been ot one time or another.  Is there a function that re-collects the AVAILABLE disk applications for "Open With?"
    Apple needs to update the below product list for "OS X 10.8.1"

    Go back to the editor and close the photo there.

  • How can an ADF Tree be configured to work with varying levels of heirarchy?

    We have a need for a Locations tree that represents the Locations heirarchy for any one of our clients. Depending on the client the number of levels in a location heirarchy could range from 1 to 9.
    I have created 9 different tree bindings and I can change the tree binding in the jsp page - the example below is for a client with 4 location levels.
    <af:tree value="#{bindings.ScdLocs4View1.treeModel}" var="node"
    binding="#{backing_locations.tree2}" id="tree2">
    For a client with 5 location levels, I'd like to programatically change the value to
    #{bindings.ScdLocs5View1.treeModel.  How can I do this?
    I was thinking I could use the setValue method on the tree control in my page's backing bean.  But I have been unable to get a reference to the tree binding.
    I don't see an appropriate method for finding a Tree Binding.  There are methods for finding an Iterator Binding, an Executable Binding, or a Region Binding (whatever that is).  But how do I "find" a reference to a Tree Binding?
    I have also given consideration to using a single Tree Binding with 9 levels (or rules in the Tree Binding Editor) and finding a way to  programatically "start" the rendering at a particular level (or rule) - in effect telling the ADF Tree control to ignore some number of rules and begin with the specified rule.  But I haven't been able to figure out how to do this either.
    Help would be greatly appreciated.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

    Bill,
    A tree binding is a particular kind of control binding, so you can find it as a control binding and then cast it to the more specific interface to work with it.

Maybe you are looking for