How can I remove the photo library from my mini iPad (6.1 GB) to regain storage for essential applications?

I have tried the work around recommended on YouTube of creating a blank folder on my PC and syncing my photos on the mini iPad to that folder but it has not worked. I badly need the 6.1 GB as I use my mini iPad for meetings and I cant get my notetaking apps to work any more! I have removed everything else I can find that is dispensable. Thanks for your advice.

You probably need to run your movies thru a piece of software called "Handbrake" on your PC. You can remove closed captioning and only have the language you want.  Plus it will produce the output suitable for viewing on any Apple device.
Google it.

Similar Messages

  • HT1229 How can you transfer the  photo library from  an iphone to a mac.

    I have a photo library on my iphone which was synced to the iphone from my pc.  Now I have a mac laptop and I cannot figure out how to get the photo library onto my mac from the phone.  The photo stream has transferred over but none of my other albums.

    If the photos are in your Camera Roll on the iPhone connect the iPhone to your Mac, launch iPhoto and import directly into your library on the Mac.
    OT

  • How can I remove the Photo Stream from my iPhone?

    I enabled iCloud on my iPhone, then disabled it and can't get rid of Photo Stream under photos. Using iOS5.

    This is covered in the manual.
    iPhone User Guide (For iOS 4.2 and 4.3 Software)
    Hold an icon until they all wiggle, then tap the "x" in the corner.

  • How can I remove the photos without deleting them from the album?

    I am making a book in Aperture 3.  I want to change some of the pages that I have put together, and want to remove some of the photos from some of the pages, to put them on another page.  How can I remove the photos without deleting them from the album?

    As a follow-up, I have found that clicking on the photo in the book also highlights the photo on the strip below.  So, if you then hit delete, you will delete the photo from both the book page and the album (which is the book, the way I have it set up).  If you only want to delete it from the book page, you then have to un-click the photo on the strip below, or both will be deleted.  This seems unwieldy.  I deleted 6 photos from a page and found all of them gone from the album.  The only way that I can see to keep them in the album is to then unselect them from the bottom strip after selecting them fro the page.  This seems to call for an extra step. 
    Nancy

  • Hello, My Iphone is full with photos as it has my Photo library on it, I guess from Syncing it with my computer... How do I remove the photo Library and just keep the photos I take on my phone on my phone?  Hope that is clear.... :)

    Hello, My Iphone is full with photos as it has my Photo library on it, I guess from Syncing it with my computer... How do I remove the photo Library and just keep the photos I take on my phone on my phone?  Hope that is clear....

    Same way they got on your phone, through the iTunes sync process. With your phone connected, iTunes running, under the "Photos" tab, deselect the albums/folders/photos you do not want on your phone. Hit the "Apply/Sync" button & they will be removed from your phone.

  • How can i delete the photo library in my iphone 4 with ios6

    how can i delete the photo library in my iphone 4 with ios6

    go to settings > general > usage > music app under the storage section > slide across the bar that says 'photo library' and a red delete button will appear
    you can also plug the device into your computer with itunes, go to the photos tab at the top center and uncheck where it says 'sync photos.' then press 'apply' in the bottom right corner. this will erase the photos that were synced to your phone from the computer

  • How can I remove the " Source.vi" from long Express VI Names?

    I am in the Moment working on the Development of an Express VI
    library for test purposes.
    How can I remove the " Source.vi" from long Express VI Names?
    This happens when the Express VI is inserted in the blockdiagram
    and listed in LabVIEW and TestStand Palettes.
    By short names like "DAQ-Assistent" or "EasyCalc" the string " Source.vi"
    is not shown at the end of the Express VI names.
    I used The Express VI Dev Toolkit 1.0 to create the Express VIs.
    Labview Version: 7.1 Base
    TestStand: 3.1
    It would be great to get the expert advice from the Forum for this issue!
    Thanks a lot.
    Andre

    I think I understand what you are asking for. If I am wrong, please try to explain it a bit more.
    The name shown may be different than the name of the vi file. To do this, your source VI and popup on its icon. From the short menu that comes up, select VI properties. In the top ring, select Window Appearance. The page that comes up lets you set various things that can affect the appearance of the VI. What you want to change is the window title. Uncheck the Same as VI name checkbox and change the string to whatever you want it to be.
    I hope that this helps,
    Bob
    Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
    DISTek Integration, Inc. - NI Alliance Member
    mailto:[email protected]

  • How can I remove the blocked contacts from skype h...

    Peace be upon you
    How can I remove the blocked contacts from skype home and all skype features?

    I found this solution and it worked.
    Paul B. Adams
    Re: safari 6.0 flash problem (blocked plug in) 
    Jul 26, 2012 7:39 AM (in response to defconnect5)
    I have a new MacBook Pro and I followed these instructions, downlonading and installing the new Flash plugin. But when I looked in "/Library/Internet Plugins" there was no folder called "Disabled Plugins".
    However, I did see two versions of Flash:
    _Flash Player.plugin with old date
    Flash Player.plugin with todays date
    I deleted _Flash Player.plugin and this fixed the problem.

  • How can I remove the Demo Viewer from my MacBook?

    How can I remove the Demo Viewer from my MacBook?

    Drag it to the Trash.
    Uninstalling Software: The Basics
    Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash.  Applications may create preference files that are stored in the /Home/Library/Preferences/ folder.  Although they do nothing once you delete the associated application, they do take up some disk space.  If you want you can look for them in the above location and delete them, too.
    Some applications may install an uninstaller program that can be used to remove the application.  In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
    Some applications may install components in the /Home/Library/Applications Support/ folder.  You can also check there to see if the application has created a folder.  You can also delete the folder that's in the Applications Support folder.  Again, they don't do anything but take up disk space once the application is trashed.
    Some applications may install a startupitem or a Log In item.  Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder.  Log In Items are set in the Accounts preferences.  Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab.  Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
    Some software use startup daemons or agents that are a new feature of the OS.  Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
    If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term.  Unfortunately Spotlight will not look in certain folders by default.  You can modify Spotlight's behavior or use a third-party search utility, EasyFind, instead.
    Some applications install a receipt in the /Library/Receipts/ folder.  Usually with the same name as the program or the developer.  The item generally has a ".pkg" extension.  Be sure you also delete this item as some programs use it to determine if it's already installed.
    There are many utilities that can uninstall applications.  Here is a selection:
        1. AppZapper
        2. AppDelete
        3. Automaton
        4. Hazel
        5. AppCleaner
        6. CleanApp
        7. iTrash
        8. Amnesia
        9. Uninstaller
      10. Spring Cleaning
    For more information visit The XLab FAQs and read the FAQ on removing software.

  • How can we remove the following zeros from quantity field ?

    Hi All.
    how can we remove the following zeros from quantity field while populating ALV by using FM REUSE_ALV_GRID_DISPLAY ?
    eg:getting output zqty = 2.000
    but i need           zqty = 2.
    help me to reslove this issue.
    Regards.
    jay

    Hi,
      While populating the field catlog do the following thing to   avoid zeros.
      wa_fieldcat-tabname = 'I_OUTPUT'.    " Curr
      wa_fieldcat-fieldname = 'FWAER'.
      wa_fieldcat-seltext_l = text-023.
      wa_fieldcat-no_zero = 'X'.
      APPEND wa_fieldcat TO i_fieldcat.
      CLEAR  wa_fieldcat.
    Thanks,
    Khushbu.

  • How can I disable the Photos app from automatically running when I plug in my iPhone?

    How can I disable the Photos app from automatically running when I plug in my iPhone?
    I have no intention of ever using Photos, in fact, having to abandon Aperture takes me one step close to moving back to Windows, but I digress.
    I just want to NOT have to kill the Photos app every time I plug in my phone.
    Thanks.

    I am still seeing the option Image Capture, like shown in the screenshot that Rysz posted.   But it is another example of the hide-and-seek Apple likes to play with us.
    The option has to be set for each device individually. With the device connected to USB, you have to click the tiny disclosure triangle in the lower left corner of the sidebar to reveal the option.
    I was perfectly happy with the program I paid for (Aperture), and now to maintain the functionality I have to pay for another application (LightRoom) to get the functionality that I paid for in Aperture.
    Aperture 3.6 is working well with Yosemite. I will use it, as long as I have a Mac, that will run Yosemite or a compatible system.
    Have you looked at Capture One?  It looks much more similar to Aperture than Lightroom.

  • HT3702 how can i remove the authorization hold from my card...

    how can i remove the authorization hold from my card

    You can try contacting iTunes support : http://www.apple.com/support/itunes/contact/ - click on Express Lane, then iTunes > iTunes Store
    How much was the amount ? A 'normal' holding charge is a small amount (e.g. equivalent to about $1), and usually happens after you add or change credit card details on your account. Here in the UK it can take a few working days for it to disappear (so a weekend can extend the elapsed time).
    Edit : I don't know what a non-liability certificate is and/or whether Apple can do one.

  • I just installed Firefox 5. How can I remove the Bing search from the address bar? I don't want to see Bing at all.

    I just installed Firefox 5. How can I remove the Bing search from the address bar. I don't want to see Bing at all. I tired the Firefox options, right-clicking on the search field and the toolbar selection drop-down but could not find a way to get rid of that unwanted search window.

    *'''at the bottom of firefox''' there is a weird looking greenish circle with a lightning bolt in it*
    1. click it and hover over to '''PREFERENCES'''.
    2. click the second circle that say's '''BING.'''
    3. '''Un-check''' both boxes.
    4. you're done :)
    Note: it's not going to show the google symbol encrypt when you open a new tab it's just going to automatically use google as a search engine.

  • HT1277 how can i remove the email add from a deleted mailbox from the prompts of the 'from' field?

    how can i remove the email add from a deleted mailbox from the prompts of the 'from' field?

    Thanks a lot, roam! That worked

  • How can I remove the background sound from the headphone jack for my MacBoo

    for my MacBook Air problem adding music intensifier (Panasonic ST-HT1000) to give it an unpleasant sound background that sounds like a whiz, it's not so loud, but it is an unpleasant .. after a short time can get used to, but the fizz does not pass, however, believe that it is a big problem.
    Further I notice that when MacBookAir disconnected from the charger, it remains quieter sound.
    At first thought that the headphone jack (3.5 mm Headphone:
    Connection: 1/8-Inch Jack) or wiere have problem, but tried 3 different cables, but that does change enything, the problem remains.
    When I added iPhonu3GS playing - the background sound were not, then everything is OK!
    How can I remove the background sound from the headphone jack for my MacBook Air 13?

    There is no way to bring that up unless you have it typed in a document. You can use My Support Profile to find a list of serial numbers that have been purchased or registered with your Apple ID.
    http://support.apple.com/kb/HT2526?viewlocale=en_US 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD  240G Vertex 3 SSD Boot HD 

Maybe you are looking for