How can I reopen a crashed file that wasn't saved in logic?

I dont think u can reopen a file that wasnt saved.

Similar Messages

How can you recover a .docx file that was previously saved and can no longer be found?

Document appears in 'recent files' however Word says it is unable to locate the file

sofaysofay wrote:
Where can you locate backup files? I can't seem to find the backup either but perhaps I'm looking in the wrong place
It depends on how you have been doing your backups. What backup solution have you been using?

How can I make an ant file that launches an AS project app in a debug flash player that traces to the flex console?

How can I make an ant file that launches an AS project app in a debug flash player that traces to the flex console?
Basically I like the control over the compiling process that I get by using Ant - but I really want traces to come up immediately without having to switch contexts.
I have an ant file that successfully launches a swf in the flashplayer - but I don't know how to make the flex console start displaying the trace output. I assume that I will have to point it to the appropriate trace output file - but I am not sure how to have ant even address the console. Is this possible?
Here is the the target node from my ANT file:
    <target name="launch">
        <exec executable="${FLASHPLAYER_EXE}" errorproperty="trace.output">
            <arg line="'${DEPLOY_DIR}\test.swf'" />
        </exec>
    </target>
Thanks for any thoughts, or alternatives!

For the record, I ended up using Logwatcher - it worked perfectly.
http://graysky.sourceforge.net/

How can I convert a pdf file that's larger than 100MB to word

How can I convert a pdf file that's larger than 100MB to word?
I have just paid $20 to Adobe to get this facility but It won't work ,
as the pdf is larger than 100MB,
I actually believe that I have paid twice for adobe but I'll take this up with them,
in the meantilme,
do you have any suggestions, I really need this material in word urgently,
many thanks
Shanna

If your files are this large, ExportPDF is the wrong tool for you. You need Adobe Acrobat, which runs locally and does not need to send your files to Adobe.

How can I open and edit files that were developed and published by ftp to my host on my old macbook, which I can no longer access.

How can I open and edit files that were developed and published via ftp to my host on my old macbook, which I can no longer access. The HD containing the files cannot be accessed. I want to be able to download the published files to be edited in iweb?

You CAN'T download published files and then edit them in iWeb because iWeb can't open them - it has no import facility so is unable to open any html or css files - a previously published site.
You can download these files yes, but you'll need to use them as a guide or to cut and paste text from there whilst you re-build your site in iWeb.
The only other way is to download the files and then open them with an html editor such as TextWrangler or use one of the other web design programmes out there that is capable of importing html and css such as Dreamweaver of Flux 4.
These are your only alternatives as iWeb can't import and if you want to continue to use iWeb, then you'll have to re-build your site from scratch. If you do just remember to back up your domain.sites file this time around - it is found under your User/Library/Applicaion Support/iWeb/domain.sites.

How can I reduce an Adobe file that I load fro a CD

How can I reduce an Adobe file that I load fro a CD.
It is 10mb and is text only.
I need to send it in an email and would like to reduce it to 3 mb
Any help is appreciated,
Greg

OK. A couple of things. You don't really have a text file. It's a scan, so it's actually a photo of letters that isn't searchable or stored as text. I'm sure that if it was really text it could be measured in tiny KB (not MB), like a long email. If you want to convert it to real text, use some software that runs Optical Character Recognition (OCR) on it. That would result in an extremely small file for truly searchable text.
OCR software comes with many scanners but usually not with the cheapest scanners. Some shareware can do it. Acrobat can do it (the paid version not the free version).
greg1424 wrote:
I got it reduced to 7.9 but when I attach it to the email it shows the 10.3 MB.
That may seem bizarre but it is normal. A file must be re-encoded for network compatibility during e-mail transmission, and that causes some types of files to bloat back up. If you can, OCR it so that you are no longer trying to send a bloated scanned photo of words and letters. If you continue to try to send it as a scan, it will remain hundreds of times larger than it needs to be. If you don't have a way of running OCR on it, at least Malcolm's suggestions above will help bring it down, maybe enough to send. But the form it is in right now is a tremendous waste of disk space.

My macbookpro is not opening pdf sites from safari or firefox, it goes to the address but just gives me a black screen. I can however open a pdf file that I have saved on my HD, it opens on preview. any thoughts?

My macbookpro is not opening pdf sites from safari or firefox, it goes to the address but just gives me a black screen. I can however open a pdf file that I have saved on my HD, it opens on preview. any thoughts? osx 10.6.8

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste (command-V) into the text box that opens, then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
I've seen an unconfirmed report that the "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you might need to remove it as well, if applicable.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

How can I password protect pdf files that intend on email

How can I password protect a pdf file that I intend on emailing?

Hi kimberlyb5119003,
To password protect a PDF file, you need to use Acrobat. For instructions, see Acrobat Help | Security
Best,
Sara

How can I create a jar file that will run automatically on double click

all the jars I created run only from the command-line.
how can I make it run by double-click on it?

First you will need to associate .jar files with the javaw.exe program in order to just be able to double click on the jar and run it from within a windows explorer application. Next you will need to set the main class attribute of the manifest file. My understanding is that the value of this attribute is used by the launcher to know which class to load. In other words, which is your main application class. To specify this attribute open your manifest file in a text editor. You will find this file located within the jar at META-INF/MANIFEST.MF. Then, add the line,
"Main-Class:<relative path to the main class>" However, remember not to add the .class extension to the end of the class name.
In Windows 2000 you can associate jar files with javaw by finding a jar file in Windows Explorer and right clicking it. This will give you a context menu which should have an Open With... option (if you are not using Windows 2000 and don't see the 'open with' menu item, try holding down the shift button while right click on the file). Select the Open With... option, then, when the dialog appears highlight javaw and select the "Always use this program to open these files" checkbox. When you hit the OK button you should have all your jar files associated with the javaw process.
Once you've done this, you should be able to double click on your jar file and run your application.
Regards,
Daniel Walsh

How Can I Make a Text File that Lists Files in a Finder Folder?

I would like to email lists of files in my various Finder folders. I have Mac OS X (10.4.6). Finder works nicely, but I cannot figure out how to save a list of file names. Can I get advice? Thank you.

I'd like to thank "roam" for the link http://www.searchwaresolutions.com which opened a site for "printwindow" for Mac OS. Wow!! That was easy! It's a free download for the standard product which luckily worked for me. After downloading PrintWindow, and putting it in my Applications and reading PDF instructions, I opened PrintWindow and clicked "File". Then I chose "Print Folder Listing", clicked that and see "Print Listing" of all my Mac's folders. Then, I selected the folder for which I wanted the file names listed on paper. Then it opens a Print Options menu. I clicked Print. Then, a "Page Setup" menu appears. I clicked "OK". Then a "Print" menu appears. On the "Print" menu, there is a PDF options menu!! On that, there is a "Save as PDF"!! I clicked "Save as PDF" and then there is a small "Save" menu where I typed a new file name and the folder in which I wanted the listing saved. It worked! Thank you.

How can I get rid of files that cannot be imported error message

Hello, this is my first post. I am a new mac user. I have imported my jpgs from an external hard drive which was in the most part successful, however, 14 of the files appear to be corrupted and every time I open iphoto9, I get the error message, '14 of your files could not be imported, would you like to import them now?' I have tried choosing both options yes and no and it then writes error message telling me it has created recovered photos folder. When you go to this folder it is empty and every time I restart iphoto, I get the same message. I have tried deleting all the files and re-importing only to find that the number of corrupted files has now doubled. I have also deleted the iphotos library recovered photo folders to no avail. I have tried creating a new library and importing the files to that but the same problem occurred. How can I get rid of this repeated error as I am now up to recovered folder number 47! Help!

P Robbins
Welcome to the Apple user to user assistance forums
quit iPhoto and right click (control click) on the iPhoto library (in the pictures folder by default) and select the show package contents command - find the import (or importing) folder and drag it to the desktop and launch iPhoto - you should be fine now - open the import(ing) folder on your desktop and if there are any photos you want import them then trash the folder
LN

How Can I View an AppleScript File that was Saved as "Run Only"?

Hello. I would like to view the AppleScript of a file I downloaded. But when I show the package contents, find the script, and try to open it, I get a message saying that the file "main.scpt" could not be opened because it was saved as run-only. How can I view this file?

Are you using the save version of Illustrator on both Mac and PC? If so, and you have the same fonts installed on both machines you should be able to open it without any problems. You may need to tell it which fonts to assign, they are not always named the same. If you don't need to edit the text, you could convert the text to outline and eliminate the need for fonts.

How can I open a keynote file that was made in Keynote Beta and downloaded from the web?

I have Keynote version 5.3
I want to edit a Keynote presentation made originally in Keynote Beta on the web.
When I download it in .key it wont let me edit the file because it says I need a newer version of Keynote.
When I try to download Keynote 6.0.1 I'm told I can't because I need a newer operating system!! I currently have 10.7.5 and there are no new updates.
Can I NOT open a keynote file that was made in Keynote Beta??!

Dude, the FCP-X forum is located here: https://discussions.apple.com/community/professional_applications/final_cut_pro_ x?view=discussions
This is the Final Cut Studio forum. There are no similarities between the two.
-DH

How can I restore the library & files that were previously on my Nano?

Here's what happened... I hooked the Nano up to my computer at work to listen to it & charge it, but could not click on any of the music. Somehow I ended up with a prompt to "update the library" with a "yes" or "no" choice. I thought updating the library meant that the files on my Nano would create a list on the work computer's empty library so that I could play the files from my Nano. I did not expect it to transfer any files!!!! There was NO WARNING THAT IT WOULD ERASE INFORMATION!!!!! What then happened was horrible. The empty library on my work computer overwrote my Nano!!!!!! So now I have lost all of my files that I was planning to listen to on my flight to Spain tomorrow. I have been searching desperately to try to restore the files on my Nano, but have not been able to find an answer. I was planning to learn Spanish from the files on my Nano during my flight there! Now the Nano has wasted the money I spent on the Spanish CD's, the Nano and the ridiculously expensive & numerous separate accessories! This incident has really made me hate the Nano (which was given to me as a Christmas present). It has caused me nothing but pain & expense in buying junk for it and now trying to recover files without any good information on the Apple website! Why????? I thought Apple was user friendly before this Nano!

I'm sorry that you didn't read the manuals but that's the way it works:
Copying songs from your iPod to your computer
"The iTunes library on your computer holds all the songs you've encoded from your CD collection or purchased from the iTunes Music Store. With default settings, iTunes automatically copies the songs in your library to your iPod. When you use your iPod as a hard disk, you can't see the songs iTunes copies to your iPod in the Finder or My Computer. This is normal. Using the Finder or My Computer, you can't copy these song files from your iPod back to iTunes or to any other computer. The synchronization between your iPod and your computer is always one way: from iTunes to iPod.
If you've erased the music library on your computer, there's no way to use the Finder or My Computer to copy the songs from your iPod to reconstitute the library on your computer. One solution is to encode the songs from your CD collection again, then sync your new library with iPod. If you purchased songs from the iTunes Music Store and didn't back them up, there's no way to download them again. You'll have to buy new copies of the songs."
Taken from Using your iPod as a hard disk
Regards
Colin R.

How can I edit a pdf file that was imported?

I want to edit a pdf/jpeg file that I imported/placed in AI? Can that be done?

Steven,
Illy just sees a bunch of pixels as do the rest of us.
You may use Image/Live Trace with suitable settings, expand, and let her work with the resulting vector artwork.
Or you may draw a (set of path(s) round the part(s) you want to keep (turning htem into a compound path in case of multiple paths, then select everything and Object>Clipping Mask>Make. That will only hide the outlying parts (unless you do the destructive deed), and you only have limited ways of (further) editing.
Or you may work in Photoshop or similar.

How can I reopen a crashed file that wasn't saved in logic?

Similar Messages

Maybe you are looking for