How can I repair my corrupted hardware key?

I've got this message:
The connected hardware key is corrupted.
How can I use Lookout 4.5 winthout hardware key?

Hardware keys ("dongles") are necessary to use Lookout packages only in certain countries. I don't think you can use that particular version of Lookout you have without the Hardware key.
You may want to get it replaced from your Lookout Sales contact.
Rgds,
Khalid

Similar Messages

How can I repair a corrupted Photoshop CC?

I am getting this message every time I try to load a photofile into Photoshop CC. I suppose the program is corrupted. How can I get my CC back in action?

When you open Mail, and go to the accounts, highlight the account giving you problems the click the minus sign at the bottom of the column to remove that account. The click the plus sign and setup the account again the way it should be.
See if that clears up the issue.
Alternative is to reinstall ML, but you would be better off trying to straightern out the account itself first.
To reinstall, restart holding the Command and R keys, then select reinstall, do not erase and install or you will lose all of your content.

How can I repair a corrupted Mail app in Mountain Lion?

Let me begin by stating I've been experiencing several issues in the Mail app off and on. Today, I was having trouble with my iCloud.com account not sending or receiving.
I go to remove and re-add the account under iCloud settings under SyStem Prefs, and I'm told that the mail account cannot be setup through the Preferences pane. I'm told to set it up in the mail app itself, but this resulted in it adding the imap version, rather than using push mail.
I decided to go and find every mail app related preferences file in the library subdirectories,, and deleted the mail folder. I did not locate any other .plist file anywhere else; although I could have missed them.
Can someone please point out what else I can do to clear out Mail of all data and start fresh? Now when I launch Mail, it displays my prior account info, in spite of the prior deletions.

When you open Mail, and go to the accounts, highlight the account giving you problems the click the minus sign at the bottom of the column to remove that account. The click the plus sign and setup the account again the way it should be.
See if that clears up the issue.
Alternative is to reinstall ML, but you would be better off trying to straightern out the account itself first.
To reinstall, restart holding the Command and R keys, then select reinstall, do not erase and install or you will lose all of your content.

Im experiments a 1436 error And I want know how can I repair it. Is my hardware a classic ipod 80 gb?

Im experiments a 1436 error And I want know how can I repair it. Is my hardware a classic ipod 80 gb?

Try this support article > iPod: Cannot restore or update in iTunes with error 1415, 1417, 1418, 1428, 1429, 1430, 1436, or 1439

PSD files corrupted, How can i repair it?

Hi,i have 3 .PSD files corrupted, How can i repair it? when i try to open it , appear this message " it is not a valid Photoshop document."

Work File Safety | Mylenium's Error Code Database
Mylenium

When Firefox is opened, nothing shows up but a black screen and the program is not responding. How can I repair this?

When Firefox is opened, nothing shows up but a black screen and the program is not responding. How can I repair this?
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.99 Safari/533.4

That issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

How can I repair the Volume?

My IMac G5,(late model '04) was not working as expected. I verified the permissions, and a few were repaired. The problem continued, then I verified the disk(Tiger).
The process returned a message box with the following text: "First Aid Failed. Disk utility stopped because the following error was encountered: The underlying task reported failure on exit".
There are 2 message indicating the "Volume bit map needs minor repair" and "the 1HFS volume checked needs repair"
The clickable button that should be pressed to perform this repair is grayed out and non functional.
How can I repair this disk?
Re Hard drive specs:
ST380013AS:
Capacity: 74.53 GB
Model: ST380013AS
Revision: 3.42
Serial Number: 5MR6P2DG
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Tiger:
Capacity: 74.41 GB
Available: 46.94 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s3
Mount Point: /

Yes, you cannot repair the Disk while booted from the same one.
"Try Disk Utility
1. Insert the Mac OS X Tiger Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
In the future... you do not want to Repair Permissions or do any writing the the HD if it needs repair.

How can I view the USMT recovery key in SQL report

Hello all,
Can anyone help me to provide sql query for below link… What I am looking is Just to create a report with all computers that has computer association any type with the recovery key information.
http://www.windows-noob.com/forums/index.php?/topic/1763-how-can-i-view-the-usmt-recovery-key/
I have tried below but not working so looking for help…..
SELECT TOP (100) PERCENT dbo.v_StateMigration.SourceName, dbo.v_StateMigration.SiteCode, dbo.v_StateMigration.SMPServerName,
dbo.v_StateMigration.SourceMACAddresses, dbo.v_StateMigration.RestoreMACAddresses, dbo.StateMigration.StateEncryptDecryptKey,
dbo.StateMigration.StorePath, dbo.StateMigration.StoreSize
FROM dbo.StateMigration INNER JOIN
dbo.v_StateMigration ON dbo.StateMigration.SMPServerName = dbo.v_StateMigration.SMPServerName CROSS JOIN
dbo.v_UserStateMigration
WHERE (dbo.StateMigration.StorePath IS NOT NULL) AND (dbo.StateMigration.StoreSize IS NOT NULL)
ORDER BY dbo.v_StateMigration.SourceName

Try this.
SELECT Distinct
SM.SourceName,
SM.SiteCode,
SM.SMPServerName,
SM.SourceMACAddresses,
SM.RestoreMACAddresses,
SMT.StateEncryptDecryptKey,
SM.StorePath,
SM.StoreSize
FROM
dbo.v_StateMigration SM
JOIN dbo.v_UserStateMigration UM on SM.RestoreClientResourceID= UM.RestoreClientResourceID
join dbo.StateMigration SMT on SM.SMPServerName = SMT.SMPServerName
WHERE
(SM.StorePath IS NOT NULL)
AND (SM.StoreSize IS NOT NULL)
ORDER BY
SM.SourceName
http://www.enhansoft.com/

How can I repair damaged pdf files?

I have several hundreds of damaged pdf files and want to repair them. I need to know how to repair them, for example with a software!

Hello Sukrit,
thank you for your reply!
I have deleted the PDF Files and needed to recover them. The size will be shown, but I can't open all of them.
I would like to recover them again or change them again to PDF files, if possible.
With regards,
Stephan
Von meinem iPad gesendet
Am 24.04.2015 um 15:41 schrieb "sukritd15" <[email protected]>:
How can I repair damaged pdf files?
created by sukritd15 in PDF Forms - View the full discussion
Hi Stephan ,
Acrobat is capable of repairing the damaged PDF' ,however it depends on the requirement as to how do you want to repair them.
There could be several reasons that can damage a PDF.
We need to know the cause that has damaged those PDF' and how exactly you want to repair them in order to assist you accordingly .
Regards
Sukrit Dhingra
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7474818#7474818 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7474818#7474818
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in PDF Forms by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

I have an Iphone 4s and i can't make a connection to my mac and other devices via bluetooth! Why is this a problem and how can i repair it?

I have an Iphone 4s and i can't make a connection to my mac and other devices via bluetooth! Why is this a problem and how can i repair it?

"I have an Iphone 4s and i can't make a connection to my mac and other devices via bluetooth! ":
That is correct.
"Why is this a problem and how can i repair it?"
Becasue this has never been a feature of iphone/ipod/ipad. There is nothing to repair.

How can I create a new recovery key if you automatically removed my trusted device after update do iOS 8?

How can I create a new recovery key if you automatically removed my trusted device after update do iOS 8?

Hey -
I need to do the EXACT same thing, but have no idea how. Has anyone out there done this?
My situation is a tad different..this is a new Mac (and I'm a brand new Mac user). Tons of querks occur under my original account (videos won't run, Safari won't support certain plug-ins). I spent 6 hours on the phone w/ 4 different Apple Reps and nobody could fix it. A rep finally looked at my MacBook Pro in person today. He created a new account just to see if that would work and under that new account, everything works perfectly fine (no querks, can view video). He tried switching a million settings in my original account to no avail.
He said to create a new account (as he did) and move my files over to the new account and then go back to the original and delete it. How do you do this?! I can't figure it out! I've got a new account created, but of course it just has the default folders in it w/ the little red icons next to them! Thanks in advance!

How can I permanently disable the "fn" key?

Hi. My subject says it all. How can I permanently disable the "fn" key?
At first I thought I had a virus or something because when I typed only weird symbols came out. Then I reset the computer. Then I couldn't even log in. I tried Time Machine etc.
Then I realized that the "fn" key wasn't working right. It seems to be working backwards. It acts like it's being pushed when it's not, and when I do push it it acts like it's not being used.
So it's kind of a simple problem but it's really annoying.
Is there a way I can just disable it permanently? Even physical force if necessary. I tried to break it but it wouldn't break. I don't really use the key anyway so it doesn't really matter. I don't want to pay a bunch of money to replace a key I don't even use.
Thanks. I hope someone knows.

That's the best answer. Yeah usually if you press "fn" or "option" you can get it to work for awhile.
Yeah I have considered some kind of external keyboard also. It will make a laptop less laptopish. But it could do the job for awhile.
It's sad because I don't even care about the "fn" or "option" keys.
But anyway it's not catastrophic at least.
And yeah maybe we can get a new computer later or something. I like mine though. It's customized and is how I like it right now.
Anyway thanks for the reply.

How Can I select an Audio Hardware with AudioQueue ?

Hello,
Apple is providing this Demo Code...
http://developer.apple.com/samplecode/AudioQueueTest/AudioQueueTest.dmg
but how can I select the Audio Hardware? I want to write an application that should output to 4 different USB Audio Cards. Is that possible?
I am searching for hours now
Thanks,
Klaus

I confirm your issue as I just tried an audio CD in my XP laptop. "All Files" showed only the 44 byte .cda files and no others. QuickTime couldn't open them (error -2048).
I also tried "Open File" with version 7 Pro and it couldn't open.
Odd that I get the option to open using iTunes and it opens and plays just fine. Since iTunes uses the QuickTime engine I would have thought QuickTime could read the files directly.
The same audio CD inserted in my Mac allowed me to double click any track and it opened directly in QuickTime Player. The files show as .aiff files measured in MB's.
Windows users could open an audio CD in iTunes and then convert to .aiff (no compression) and then open the .aiff in QuickTime.
I guess I should have tried myself before getting your hopes up. I apologize.

How can I repair a cracked itouch screen

how can I repair a cracked itouch screen? can it be fixed in an apple store?, etc.

Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
A third-party place like the following may be less expensive. Google for more
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace it yourself
iPod Touch Repair – iFixit

My airport extreme has connected to a Tplink router, i set my AE in Create network, so i get a problem of Double NAT. How can i repair this probleme because i have to use TPlink for my IP TV and i want to use AE to creat my network and the guest NW.

my airport extreme has connected to a Tplink router, i set my AE in Create network, so i get a problem of Double NAT. How can i repair this probleme because i have to use TPlink for my IP TV and i want to use AE to creat my network and the guest NW. If we don't have a solution for this question, can i set my AE to use the IP TV and how??? I'm using a 4th Airport extreme

No, not unless it is simply a network connection.
How is your IPTV being provided.. if it is using a separate vlan or separate vpi/vci in the adsl connection. Who is your ISP?
Is the TP-Link ADSL?
Is the IPTV using a separate voice channel on adsl?
Or a different vlan.
Sorry but it is something where a definite answer is not possible unless you provide all the details.
The setups are unique to each ISP around the world..
Here is one for our local ISP.
http://www.avenard.org/iptv/Setup.html
He has a section on getting this working with apple router over wireless.. look
http://www.avenard.org/iptv/IPTV_and_Wireless.html
Google around and see if other people have had success.. the whole setup is tricky.. and it is hard if nobody has used it who actually understands networking.

How can I repair my corrupted hardware key?

Similar Messages

Maybe you are looking for