How can I repair my internal earpiece? The speaker works not the earpiece., How can I repair my internal earpiece? The speaker works not the earpiece.
How can I repair my internal earpiece? The speaker works not the earpiece. All other sound features work. I can use an external earpiece and I get sound.
OK, I went to Private Browsing to change Never remember history to choose Use custom settings for history and then clicked on Permanent Private Browsing Mode and clicked on the bottom OK. I then went to my Firefox messages and clicked on that internal-linked multimessage and then clicked on a link. It went there for only 1 second and reverted to the top of the message, not moving on further clicking.
I then went to tools > options > privacy only to find that the default Never remember history was back in the panel. It wasn't stable at Use custom settings for history. I tried this several times. It always reverts either right away or after that 1-second success. One time it lasted an amazing 3 seconds before reverting to the top of the multimessage e-mail. So THAT failed too.
OK, so then I went to Internet Explorer and called up that message. Clicked on an internal link and watched it fail for 1 second and then clicked again and it held the message for a long time. It's something in Firefox not Int. Explorer. Please see the image to let you know what I am doing.
Comments?
Carl
Similar Messages
-
i have an unlock iphone 4s that i buy it not from apple store can and i broke the screen can i repair the screen i apple and how mich is it if yes??
Not covered by warranty. If you make an appointment at an Apple store, you will be offered an out of warranty replacement. Cost is US $199 for an iPhone 4S.
-
When Firefox is opened, nothing shows up but a black screen and the program is not responding. How can I repair this?
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.99 Safari/533.4That issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode -
I'd like to restore photos from my iPad3 to the iMac once I have a new drive. I had uploaded them directly from the iMac onto the IPad via iTunes. That iTunes was wiped out in the drive failure. In the meantime I wanted to move the photos to my MacBook Pro, but iTunes tells me they belong to another iTunes (mine also but was on the iMac) and syncing will erase the content on the iPad. Moved all photos (4000+) to an album in iPhoto on the iPad, but iPhoto on the MacBook doesn't see the album- It only see photos directly taken on the iPad. I seem to be caught in an owenership issue between my photos, my computers, and permissions due to the dirve failure.
Any ideas?
Thanks in advance for any assistance.
ToddPhotos synced to an iDevice are different from ones taken by the device's camera.
Difference between camera roll, photo stream, and photo library - https://discussions.apple.com/thread/3846502
You will need to use a third party utility to try to recover them as it is assumed that if you transferred them from your computer you alredy have the original files on the computer and a backup of the computer itself (do not rely upon your iPad as a backup). Furthermore, the photos transferred to your iPad have reduced quality so they are not as good as the originals.
Here's my old list of utilities (this list was really done for music rescue so make sure they do photos too):
Note: The information below hasn't been updated since early 2013.
Some of the information below has subsequently appeared in a document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991
Your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was planned with you maintaining a master copy of your media on a computer which is itself properly backed up against loss. Syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchases which can be transferred to a computer.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only purchases from iTunes Store
For transferring other items from an i-device to a computer you will have to use third party commercial software. Examples (check the web for others; this is not an exhaustive listing, nor do I have any idea if they are any good):
- Expod (free) - http://www.headlightsoft.com/expod/ - Mac, universal for 104.+ (newer machines try de-Tune)
- deTune (free) - http://www.headlightsoft.com/detune/ - Mac, 10.5+
- Senuti - http://www.fadingred.com/senuti/
- Phoneview - http://www.ecamm.com/mac/phoneview/
- MusicRescue - http://www.kennettnet.co.uk/products/musicrescue/
- Sharepod (free) - http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2 - Windows
- Snowfox/iMedia - http://www.mac-videoconverter.com/imedia-transfer-mac.html - Mac & PC
- iexplorer (free) - http://www.macroplant.com/iexplorer/ - Mac&PC
- Yamipod (free) - http://www.yamipod.com/main/modules/downloads/ - PC, Linux, Mac [Still updated for use on newer devices? No edits to site since 2010.]
- 2010 Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them. -
How do I repair a damaged dmg that won't mount and Dick Utility can't repair?
Apple Care gave me wrong instructions on how to create a disc image of my internal HD then erased it. Now I have a .dmg that has the same gigs as the HD but won't mount and Disk Utility can't repair. Tried to recover files with Data Rescue 3 but that isn't going so hot. Any suggestions?
Thank youThe Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
I guess that it's a moot point to ask if you didn't test the dmg before you erased the drive. Do you have a Time Machine or other type of backup?
If not, it's a hard lesson to learn, but I would guess that unless you are willing to pay for expensive outside data recovery service, all is lost and you are starting over. -
My imessage isn`t working properly from my iphone. what could be the problem? how can I found out? the internet is working and in ipad i can send message.
I have no idea what the "freezer fix" is, nor why anyone would think temporary exposure to cold will somehow fix a hardware issue with a 100% solid state device. Also, actually freezing your iPhone may very well itself cause damage.
If you dropped it and wifi immediately failed to work, the odds are you inflicted physical damage to it - perhaps the antennae connection internally. You could try a simple reset and see if that helps, but if not, you need to take it into Apple for an evaluation and diagnosis.
If it has internal damage, since you dropped it, your warranty no longer applies. Apple does not repair iOS devices, the merely swap them for factory refurbished units (and send your damaged one back to the manufacturer in China for refurbishment or recycling). You would ahve to pay the out of warranty replacement fee (look on your country's Apple web site, under support for the iPhone for fees). -
I am extremely disappointed and angry with Apple service. I am a writer and booked three weeks in Spain so that I could finish my book. On the second day my laptop cut out on me asI was working on it, so I took it to Goldenmack in Cadiz. Not only was I given someone else's macbook when I went back to collect it, but then when I returned to the UK, the Apple shop in Brighton managed to delete ALL my data from the hard drive because I was unlucky enough to get a trainee on her first day. I have since learned she should not have deleted my data without even running a diagnostic. She told me she was going to 'restore' the drive. I took this to mean she was going to restore my work. But no! She erased the lot.
I complained and eventually was put in touch with a supervisor, who I was told had authority to resolve the issue. She said she would get the shop to phone me. That was ten days ago and I'm still waiting.
Ok so there's nothing I can do now to get back the three chapters of my book that I have lost and didn't back up, but the hard drive on this laptop is still faulty. I try to back up my work every time I use the machine but as soon as I attach an external drive, the whole thing shuts down. I can't use it any more as I can't risk losing any more work. This laptop is only just over a year old and this is just not acceptable, especially since I have really looked after it.
This is an appalling service I have encountered from Apple, and I am not going to ignore it. I have contacted the young chap whose laptop I was erroneously given, and the repair of which I paid for! (although I did eventually get a refund), to ask him if he had been given mine as well. He said he had been completely unaware that his laptop had been given to me and he is furious as he had loads of "sensitive material" on it." I have no idea in whose hands my laptop has been either, or indeed what damage it sustained while it was supposed to be in for repair.Contact Apple Support:
http://www.apple.com/support/contact/
Apple - How to Contact Us:
http://www.apple.com/contact/
Be sure to refer to the repair ticket number.
Sounds like a terrible mixup.
Good luck & happy computing! -
In oracle rac, If user query a select query and in processing data is fetched but in the duration of fetching the particular node is evicted then how failover to another node internally?
The query is re-issued as a flashback query and the client process can continue to fetch from the cursor. This is described in the Net Services Administrators Guide, the section on Transparent Application Failover.
-
Hi, I was just wondering how much it would cost to repair the rear camera of my iPhone 4s. I dropped it and it won't work and I hear something rattling inside when I shake it. How much would it cost to fix?
If you have a tool, try removing the battery cover and chech out. Some times the camera pin may have been misplaced. If so, you can fix it yourself.
-
I am trying to use and education program that needs Java applets and it will not run on Safari. IE will not install from the web. How do I get a browser that will work to install so I can use this program when I travel.
Try using FireFox. IE will only run on a Mac if you run Windows on the Mac.
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows 7 or Windows 8. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusion and Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. A more recent comparison of Parallels, VM Fusion, and Virtual Box is found at Virtualization Benchmarks- Parallels 10 vs. Fusion 7 vs. VirtualBox. Boot Camp is only available with Leopard and later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive. -
I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully under me?
The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
3. Other issues
If you see a lock screen when trying to boot from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another authorized service provider to be unlocked. You may be asked for proof of ownership.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. -
How can I get someone to answer the phone? I'm ready to give VERIZON my business. I sat on the phone for over 20 minutes only to be transferred to "Sales." I then sat on the phone for another 15 minutes!!!! I finally hung up.
It takes an enormous amount of patience and time to get through to a qualified person.
My Samsung S5 was locked out and needed a factory reset. Including attempts to achieve this locally, it took over an hour before my problem was even addressed.
You may be interested in my journey to a very good technical support person.
First I called the local sales person who had given me his personal business card with the friendly advice to call me with any questions. No answer at about 8:30 am when the business was open. His voice mailbox was full.
Then I called the local store where I had purchased the phone. The person who answered the phone had learned all the proper stock phrases, but was not familiar with the issue, stated that there were no customers in the store, and I should go there in about an hour when there would be more staff. He suggested dialing *411 from my phone (which was locked). Then he gave me a number to call Verizon, which he had to look up, and it took a minute or so. The number was (removed). That is an internal number for employees and contractors and requires a code to access, obviously not designed for customers' use. He finally cut me off by stating that there were a number of customers in line waiting for his attention!
After researching all my papers I found 800-922-0204 on my bill. The automated message suggested a hold time of 5 minutes, it took 20 minutes for a Customer Service Representative to pick up, and then I was referred to technical assistance. The hold time was announced to take 5 minutes, after 12 minutes I finally was connected.
Fortunately I had my computer set up for Skype on a loudspeaker, and was able to do some other paperwork while waiting.
Persistence was rewarded by having the good fortune to be connected to a very experienced, qualified and patient technical support staff with the name of Thomas (removed). He solved my problem, answered my questions during the process of resetting the phone, and gave an example of courteous and kind customer service that I had never experienced before when dealing with any major internet company.
>> Edited to comply with the Verizon Wireless Terms of Service <<
Edited by: Verizon Moderator -
TextEdit is not working. I have tried repairing and I have tried reinstalling but it still says "You can't open the application TextEdit.app because it may be damaged or incomplete."
Can anyone give me some other ideas as to how to fix. Thanks.Thats the first thing I tried last night. And reinstalled just textEdit but no luck, then I deleted TextEdit and reinstalled it again and I was still getting the same message. Tried pacifist this morning again but this time I tried reinstalling the whole apps package half way through its says it cant reinstall due to multiple missing files.
Tried the repair option on the OS disc it says everything is fine -
Hello,
Here is my application: I need to use a 6602 counter/timer to generate a pulse train of certain frequency and duty cycle. On each rising edge of this pulse train, I need to output an arbitrary waveform on Ch. 0 of an niFGEN (5422) AND acquire data from CH. 0 of an niSCOPE (5124). I also need to synchronize the niFGEN and the niSCOPE to the same clock used for the pulse train (6602/ctr0). This process needs to continue until the user stops the system.
I can generate the pulse train using the 6602 just fine using ctr0, but the pulse train shows up on OUT0 by default. When setting up the niFGEN and niSCOPE to trigger on rising/positive slope edge, OUT0 is not an option for either device as a source for the digital rising edge (pulse train). The main options for both are PFI0-3 and RTSI lines.
Questions:
1.) Is there a way that I can direct the pulse train to a location (such as an RTSI line) where BOTH the niFGEN and the niSCOPE can use it as a start trigger for each rising edge? I noticed in MAX that a route can be made between ctr0's internal output and a trigger line and others. If this is a solution, could you please explain how to accomplish this?
2.) Once I configure the niFGEN and niSCOPE to be triggered on a digital rising edge, how can I effectively have this happen for every rising edge from the pulse train? In other words, can I just initiate the FGEN outside of the while loop and it will generate a waveform for each rising edge it sees at the source until the while loop is exitted?
3.) Is setting a reference clock for the niFGEN and the niSCOPE the same thing as synchronizing both devices using the same clock that generated the pulse train? It is not clear to me the difference, and why it would necessarily be useful.
Images of my current front panel and block diagram are attached. If you would rather have the actual VI's just let me know. Any help and/or explanation on this is greatly appreciated. Thanks in advance.
Attachments:
Front_Panel_Control.jpg 278 KB
Block_Diagram_Control.jpg 263 KBHello Cgifford,
Welcome to National Instruments Forums.
To output your signal to the PFI lines,
you can use external connectios between OUT0 and PFI lines. You can also use
the backplane to do so by routing into the same RTSI line.
1)
On the SCOPE and FGEN, the name of the
terminals are actually “PXI Trigger Line x/RTSIx” but on the 6602 you might
need to route the signal using the property:
You can also use the DAQmx route signal which perform the same opperation.
2)
This will depend on the frequency of
your pulse train. If this is lower than about 10 ms, then you can probably
place this on a loop and start and stop the acquisition every time. If the
frequency is higher than this, you will have to use:
- Scripting on the FGEN side (read more)
- MultiRecord Fetch (more information in the scope help file
section “Acquisition Functions Reading versus Fetching”).
3)
The short answer is yes. The longer one
might depend on how tight you need the synchronization to be (us, ns, ps). For
very tight synchronization, you should look into here.
Message Edited by Yardov on 06-18-2007 03:14 PM
Gerardo O.
RF Systems Engineering
National Instruments
Attachments:
property.JPG 7 KB -
How can we provide 2 URLs in the HR personalization form, so that users can
We are not able to open the PDF report from the external node which is placed under the OA_HTML. Nvaigation is Employee Self Service for US -> Update or Add Direct Deposit Account
Internal urll ----"http://tech.com:8000/OA_HTML/TTEC_Benefits_Docs/Branded/DebitCrdholderBrochureSignature.pdf"
However, the external users from internet need to access the pdf document and this fails for them because they have no access to above URL from public internet. They need to get to above pdf document for e.g. as:
"https://publicerptech.com:443/OA_HTML/TTEC_Benefits_Docs/Branded/DebitCrdholderBrochureSignature.pdf"
How can we provide 2 URLs in the HR personalization form, so that users can access the pdf document?Hello David,
Sorry for not getting back to you sooner. You can provide feedback on Transport agents by using this site:
http://officespdev.uservoice.com/.
With regards,
Michael | Microsoft Exchange Developer Content
The
Exchange Development Forum Guide has useful information for using the Exchange Development Forum.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
I just backed up my photos by copying my iPhoto Library onto an external drive. Now the Library on my MacBook won't open. I can only open the photos if the external is plugged in. How can I resolve this issue?
Exactly what did you do?
The correct steps are
Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
My guess is that that you have not switched iphoto to use the external drive yet - opttion launch and select libary
LN
Maybe you are looking for
-
Not able to find saved WEBI reorts in BO 4.0
Hi, I am experiencing weird Web Intelligence 4.0 behavior, I have upgraded report from BO 6.5 to BO XI 4.0 but now am not able to edit report, Edit option is available but when click on it then it doesn't opens edit window. Also same report when i tr
-
Opinion of 256Gb SSD? Worth it?
I don't know why Apple has the 320GB at 5400 rpm as their standard config, when the 320Gb at 7200rpm is only $45 more (for educators it is). If I want the 7200rpm drive I would have to order it so that got me thinking about getting the 256Gb SSD driv
-
Is iCloud replacing mobile me?
Is iCloud replacing mobile me. My mobile me is running very slow or not loading at all and everything else seems to be fine.
-
Link Pivot tables between workbooks
I have two BEx workbooks A and B. Workbook A has the query data, pivot table and a pivot chart. I need to create a new Workbook B and link only the pivot table from Workbook A to the Workbook B. Can we link a pivot table between two workbooks? Raa
-
Hi I purchased a white macbook in August 2010 and upgraded to Lion about a month after release this year. Ever since doing that the laptop has been slow. Examples of this include anytime I go to open Launchpad the gesutre freezes for a few seconds be