How Can I Repair the Triangle/Exclamation Point Issue?

I have repaired and then Rebuilt my database only to have the same triangle come up while totally putting different Event dates around my photos.
This is Apple for crying out loud. This monumentally time consuming answer which doesn't work should not be coming from Apple.
How can I fix this issue once and for all?
I also have trouble dragging and dropping my Albums in the order I want them.
Both these issues are unacceptable coming from a company such as Apple that charge so much for their devices, etc.

Moving albums is a strange issue that I've not seen and many othr have not but many have
Try creating a folder and putting your albums in it - some people have foud that to help - you also can use folders to reduce the number of albums you are dealing with while organizaing - no idea what you have but as an eampe if you ha an album for every town you visited on vacation it woudl be hard to manage - if you made a vacation folder with country folders in it an then town folders in the counrty folders all of a sudden you are dealing with a much more managable set of data to organize
I have not seen a definative answer other than using folders to help
As to IPLM - almost all of the time it doess resolve things - but even then there are people who had to start over (which is not quiet as bad as it sounds - but certainly not great)
The real answer is a good backup so when there is a problem rather than cure it you can go back to a good tiem and move forward from there
LN

Similar Messages

How Can I Remove the Red Exclamation Point on SMS text messages?

I have a blackberry 9300. I receive text messages that has red exclamation point even though my messages are not on high priority. is there any way I can fix this? Please help. Thank you!

Are you using the "Reflections" theme in your slide show? Then the mirrored reflection is built in and you cannot remove it. It is part of the design. Pick a different theme, if you do not like this feature.

How can I repair the Volume?

My IMac G5,(late model '04) was not working as expected. I verified the permissions, and a few were repaired. The problem continued, then I verified the disk(Tiger).
The process returned a message box with the following text: "First Aid Failed. Disk utility stopped because the following error was encountered: The underlying task reported failure on exit".
There are 2 message indicating the "Volume bit map needs minor repair" and "the 1HFS volume checked needs repair"
The clickable button that should be pressed to perform this repair is grayed out and non functional.
How can I repair this disk?
Re Hard drive specs:
ST380013AS:
Capacity: 74.53 GB
Model: ST380013AS
Revision: 3.42
Serial Number: 5MR6P2DG
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Tiger:
Capacity: 74.41 GB
Available: 46.94 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s3
Mount Point: /

Yes, you cannot repair the Disk while booted from the same one.
"Try Disk Utility
1. Insert the Mac OS X Tiger Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
In the future... you do not want to Repair Permissions or do any writing the the HD if it needs repair.

CS3: Rotated page item: How can I get the top-right point

Hi
I have a rotated page item. Now I should have the top-right and the bottom left point. If I get the rectangle of this page item I only have the top-left and the bottom-right point. And I can read the rotation angle.
- How can I get the missing points?
Thanks
Hans

Algorithmically speaking (ie, this is NOT real code), isn't it just something like:
if page.rotationAngle == 90 then
origTopLeft = (newBottomRight.Y, newTopLeft.X);
else if page.rotationAngle == -90 then
origTopLeft = (newTopLeft.Y, newBottomRight.X);
else if page.rotationAngle == 180 then
origTopLeft = newBottomRight;
else
origTopLeft = newTopLeft;

How can I monitor the active access point + data c...

My privider (o2 Germany) requires me to use different access points (APN, proxy) on my phone (N80) depending on the type of browsing I want do do (WAP vs. "normal" access), and each of them has a "high cost trap" if I use the wrong one for the particular service.
Very annoying - up to the point that I consider not using the phone for online access at all because I'm so scared to run into uncontrollably high fees.
Anyways. I wonder if there is add-on software for my phone that helps me monitor my data connection, i.e.:
* show me the currently used access point at the top of the display (yes, I know I can go into some deep menus to look it up, but that's not very helpful or even easy to use)
* automatically disconnect when the conn is idle for a while (One of the data modes is time-based, meaning I do not want to have it open all the time by accident)
Currently, all I can see at the top of the display is that I have a data connection at all, but that does not give me enough information to know I'm in the right mode for what I'm doing.
Thomas

You can force a disconnect by pressing the red/hangup key for a couple of seconds when the phone is in the standby state.
And in menu > Tools > Settings > Connection > Packet data change the setting "Packet data conn." to "When needed" and leave the "Access point" setting there to "None".
When you or apps on your phone are not doing any data transfer, then regardless of whether it is a WAP or "full" Internet packet data connection, you should not cumulate any charges.
You can also move the Connection Manager app from the Tools submenu to the main menu, or even to the Active standby apps list (or the softkeys) for quicker access. No need to deep dive into menus for it then.
And for individual apps, you can usually set the default access point to whatever is best to use for that particular app. For the browsers ("Web" and "Services") you can also make them ask you to pick the access point every time you connect.

How can i solve the contact itunes support issue when trying to make in app purchases

how can i solve the "please contact itunes support" issue when trying to make in app purchases? my account has available credit from a gift card

Click here and request assistance.
(69559)

How can we repair the output of the downloaded excel in bid invitations?

Hi
We are intrested in changing the current format of the downloaded file. We would like to remove the header lines and that only the item lines will be performed, we are also intrested of removing the columns: line category, Field Attribute, Change Key. The only columns we need to be performed in the file are: Document Number, Item Number, Item Description, amount, Delivery time.
Can anyone clarify how can this be done?
Thanks
Hilla

Hi,
Dave is right.
You can use BADI : BBP_PD_DOWNLOAD to chnage the format of the file.
Also see ths related thread:
Re: SRM 4.0 - Upload function of Bid Invitations (Bidding Engine)
BR,
Disha
DO reward points for useful answers.

How can I get the Microsoft enhanced Point and Print compatibility driver installed on Win7 LC master?

We recently migrated from a Windows Server 2003 to Windows Server 2012 print server. When recomposing a linked clone pool with the old 2003 server, drivers were taken care of for the printer when the user printed for the first time after desktop recompose. With 2012, any printer using the Point and Print driver doesn't seem to obtain the driver again from the 2012 server. All of our clients are running Windows 7 which means the Microsoft enhanced Point and Print compatibility driver is not installed in the OS natively.
I apparently need to figure out a way to get this installed on the host image so it trickles down to snapshots when recomposing the linked clone pool but I haven't been able to dig much information on doing this. Does anyone out there have any insight on how to accomplish this? If I recompose a pool now for a user who is using a new Point and Print driver, they get the following message that is resolved by removing the printer from their account and re-adding it:
"The 'Microsoft enhanced Point and Print compatibility driver' printer driver is not installed on this computer. Some printer properties will not be accessible unless you install the printer driver. Do you want to install the driver now?"
I figured the easy solution would be to just install a printer using the Point and Print driver and then remove it...leaving the driver behind (unless it cleaned up after itself). The problem with this is in my testing, even after removing and re-adding a printer that set off installation of this Point and Print driver on the client, any other printer that was using it still required the remove/re-add process in order to work, else I got the same message. That tells me that the driver may be custom for each printer installed?
Color me a little confused. I do NOT like the way that Server 2012 handles printers. I've come across a few other issues as well (such as duplex capabilities not being remember on the print server for a printer) that I never had with the 2003 server.
Thanks!!

I was able to get it to work using your instructions off of here and your other thread
Thank you!
Chris
http://social.technet.microsoft.com/Forums/en-US/864553c2-c8ff-49d2-bd48-eb7b47381111/windows-2012-print-server-problem-with-xp-clients?prof=required

How can I reset the xy zero point to a different spot in my PDF? Possibly via a plug-in?

I would like to reset my zero point to aid in measuring and aligning elements in PDFs. Indesign, Illustrator and Photoshop will let you do this but not Acrobat Pro. Any ideas? I also use Pitstop Pro but can't seem to find anything in there that can help other than the measure tool.

You can't. The coordinate system defining the position of page elements is a fundamental property of the ISO PDF standard.

How can we disable the OSX Access Point functionality without disabling all wifi.

Curious if anyone knows a way in Lion/Mountain Lion to disable the OSX access point features.
i have about 50+ macs in our company for iOS development. lately we've had a lot of rogue AP's showing up, people bridging the internal network by activating the "become a hotspot" feature in OSX. this is a *GREAT* feature, don't get me wrong. especially the latency and ease of use.. but in our case its causing problems, and i'm looking at a way to disable the AP features without disabling ALL wifi with something like.
/usr/sbin/networksetup -setairportpower en1 off
this is a bit too much ,it disables the entire airport/wifi. we want to only disable the access point capabilities.
any hardcore guru's out there have some advise?
TIA!

Enabling sharing services requires administrative access, so one option is to set this and only give folks standard "managed" access. The Internet Sharing service is a process called "InternetSharing" that runs as the root user and establishes all the appropriate services for the needed connection. You could technically remove or even rename this process on systems to prevent it from being used, or remove or disable its launch daemon. These files are in the following directories:
/System/Library/LaunchDaemons/com.apple.InternetSharing.plist
/usr/libexec/InternetSharing

How can I repair the minor damage done to my HDX16 laptop case?

I own a HP HDX16-1140US laptop. I accidentally bumped the right corner against a door and the plastic piece protecting the USB port, laptop lock, and AC port came off. It looks like the repair would be pretty easy, but I want to make sure that I do the right thing and don't risk damging the case or the ports itself. Would super glue be acceptable?
Plastic piece on
Plastic piece off
Metal piece slightly off

Super Glue is not a good idea. I would disassemble it and see if I could not get the pieces to snap back into place. Everything is held in with snaps. Have the snap tabs been broken? if so I guess you can use Super Glue but keep it as far from any circuitry as you can. Here is the Manual:
Manual
It does not appear that any of your broken off pieces is a separate part. All are part of the base.

How can I repair the the letters wearing off of my keyboard?.

The letters are wearing off of my 4 year old iMac keyboard. Is there a good way to mark the keys that will not rub off? Everything else works great and I would like not to buy a new keyboard if at all possible.

Check out this website.
http://www.thekeyboardcompany.com/keyboard-stickers/replacement-keyboard-sticker s/

How can I repair the shuffle feature for IPOD?

My 3g phone recently lost its ability to shuffle music. I plays music just fine, but only one song at at time. The same song will repeat until I manually select a different one. The shuffle button has no effect.

Turn off the repeat feature.
iPhone User Guide (For iOS 4.2 and 4.3 Software)

How can I resolve the push button dot issue in oracle forms 10g..?

Hi All,
We have migrated to forms6i to forms10g, in 6i all the push button labels are displaying properly, but in 10g forms its giving dots like this … after displaying some characters. I guess its width problem but how come its changing in 10g alone.
Kindly give me any workaround to resolve this issue
Thanks in Advance
Thangaraj.

Hi All,
We have migrated the forms 6i to forms 10g R2.We are facing push button issue like,the lable is displayed in the button is reduced.Assume the button's label name is Cancel.Actully it is displaying like Can.....Due to Java used in forming the buttons.We have forms count nearly 300.We have diffent size buttons.
We have solution like
1.Manually
2.PC Creation
3.Java Class and Jar Files
4.JDAPI
5.basejini.htm
The method five,we have tried.But there is no changes after this changes also.
Can you guys please let us know the correct menthod(with steps 1 by 1) to do this in quickly.
2.There are look and feel 2 types oracle and generic,rather than this do we have any other type.We are looking for any cusrtomized settings in config files.
Thanks in Advance.
Regards,
GR

On plugging my iPod to the iMac, all the songs got deleted on the iPod. Now it doesn't sync to iTunes and it shows that 'mac os can't repair the device'. How can I get my iPod to start functioning normally again? Please help!

Hey! I plugged my 80 gb ipod classic to my imac, but had to switch it off when itunes hung. The ipod wasn't switching on , and when it did, all the data, including all my songs were deleted. Now, when I try syncing it to the mac, it doesn't connect to the itunes and I keep getting an alert saying ' Mac osx can't repair the device'. Now, althought all the data is gone, the ipod still shows 30 gb free. What will happen if I partiton my ipod? How do I get it to start functioning again? Please help!

Try a low level reformat of the iPod's hard drive to possibly try and repair some of its damage. Use the instructions in this article to walk you through the process.
http://www.methodshop.com/gadgets/ipodsupport/erase/
B-rock

How Can I Repair the Triangle/Exclamation Point Issue?

Similar Messages

Maybe you are looking for