How Can I replace an image and save the same size as the previous?

I want to replace an image in a PDF, but I would like to keep the same size, and location as the previous. I have tried to to it, but the new image takes a different size.
This is a PDF exported from an InDesign template.

Thank you.
The problem is that the person to edit the PDF doesn´t have ID and doesn't know how to use it.
The idea is that the design department create very sharp ID templates for people from other departments of the company only have to replace information (text and image).
We are looking for a program to edit PDF files and function as templates forreplacement information.

Similar Messages

  • How can I do to acquire and save date in the same time and in the same file when I run continual my VI without interrupti​on.

    I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
    So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
    Thank you in advance.
    Regards,
    Attachments:
    HP8563E_Query_Amplitude.vi ‏37 KB

    Hi,
    Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
    So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
    I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
    So I want to acquire 1 time amplitude from spectrum analyser each 5
    period of the signal that I am acquiring from parallel port.
    So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
    Here is a new algorithm.
    1) i=0 (counter: number of period)
    2) I read value from In Port
    3) If I acquire a period
    i= i+1 (another period)
    4) If i is multiple of 5 (If I read 5 period)
    acquire 1 time amplitude and write to the same
    file this amplitude and the corresponding distance
    Distance = 12*i). Remember each period of signal
    Corresponds to 12 Inches).i has to take these
    values: 5,10,15,20,25,35,40,45,50,55,60............
    5) Back to 2 if not stop.
    Thank you very much for helping me.
    Regards,
    Attachments:
    Acquire_Amplitude_00.vi ‏59 KB
    Figure_Algorithm.doc ‏26 KB

  • How to scan with capture image and save 10.6.8

    how to scan with capture image and save 10.6.8 ?

    Instructions for using Image Capture for this available via the 2nd section.
    http://support.apple.com/kb/HT2502

  • How can I quit (close) Photoshop and keep all windows so that the next time I open Photoshop the fil

    How can I quit (close) Photoshop and keep all windows so that the next time I open Photoshop all the files that I had open are there already in the same position as when I closed Photoshop?
    I've been a Fireworks user for over 10 years and just switched to Photoshop. I cannot find a setting that will enable all my file windows to reopen when I quit Photoshop. This is really a problem since I often work on several files at the same time.
    Please let me know if the feature exists or point me to where I can post a message for a new feature to be implemented. The feature is a must for any designer working on large projects.
    Thanks!

    There is no such functionality. You could perhaps create a script that stores that info in a custom text file and arranges them accordingly in the workspace, but that's as good as it gets...
    Mylenium

  • Good evening..i accidentally dropped my iphone 5ang it has scratches on the metal case,how can i replace a new and original metal case?

    good evening..i accidentally dropped my iphone 5 and it has scratches on the metal case..how can i replace anew and original metal case?

    You cannot.  Apple also does not repair iPhones.
    Did you purchase Apple Care Plus?  If yes, they will replace the phone for a $49 fee.
    If nothing else is wrong, I'd just put it in a case and not worry about it.

  • How can I merge conference calls and hang up on one of the instead of both on iOS 8.1.1

    How can I merge phone Calls and make conference calls with iOS 8.1.1 and hang up on one instead of both of them , it's not giving me an option like before on iOS 7 ?

    The following from the 8.1 user manual (http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf) may help
    Create a conference call. While on a call, tap Add Call, make another call, then tap Merge Calls. Repeat to add more people to the conference.
        Drop one person: Tap  next to a person, then tap End.
        Talk privately with one person: Tap , then tap Private next to the person. Tap Merge Calls to resume the conference.
        Add an incoming caller: Tap Hold Call + Answer, then tap Merge Calls.

  • How can I Create Class Diagram and save as image in Java

    Hi
    I have to make a project in java that will generate class diagram of the input class file.
    I have some knowledge of listing methods/properties of a class file in text from but don't really know how to draw a class diagram model (JBuilder 2005 such class diagram whenever a class is compiled). I have to save that class diagram in an image file as well.
    Please guide me what must be my line of action to follow. I need some suggestions on urgent basis.
    Thanx in advance
    Regards

    Hi
    My problem is that I have to construct toll like JUDE. What I need from this tool is just to simply draw the diagrams and save in an image format.
    So I need to know how to draw the diagram and save in an image file. I don't know about the drawing libraries available in Java. Kindly help me
    Regards

  • How can I replace my Mac and iCloud contacts with the ones in my iPhone?

    I have a new iPhone (iOS 6) and have edited, added, linked and deleted some of my contacts. How can I have THAT list replace all of the other contact lists in the rest of my devices?

    If you are using iCloud on iPhone and Mac, that must be already done. If not, you have to setup iCloud on both devices with the same Apple ID.
    Before you try anything, download an app like "Contacts kit" or "My Contacts Backup" to your iPhone and make a backup of your list and send it via email to yourself.

  • How can you use one image and edit it three different ways to export later?

    I am a new Lightroom 3 user.  How can use the same image and edit it multiple ways to produce mulitple images to later export?  For example,  I have a picture of a bride and groom.  I want to use that image and create a color image, a black and white image, and a close up of their hands.

    Do I need to do either of those options before I start editing the image at all?  For example,  what if I am working on the image and doing some creative edits.  Then I think of another option that I could do.  Is it too late at that time or can I still get the original image to begin with?

  • How can I drag an image from a page in Safari to the finder and have it be saved as an *actual* image instead of a webloc?

    Safari used to let me drag an image from a webpage to the finder and have the dragged file be saved as an actual image but now all that's saved is a webloc file.  I want the image saved, not a reference to the image's URL - do I now have to always use "save as" to save it?
    I can understand Safari creating a webloc file if I dragged the site icon from the location bar to the finder, but to make the default behavior for dragging things that are parts of a page (not the page itself) as webloc files seems like a HUGE step backwards for usability.
    Does anyone know if there's, say, a key to hold when dragging to avoid saving a webloc file or a defaults command or something to make Safari revert back to sane draging behavior?

    Good questions...  I'll have to try and figure out when the problem first happened - I was thinking it was when I upgraded to Safari 5.1.4 but that might not be the case...  I'll try your suggestions to see if any of them eliminate the problem (I have restarted recenlty and that didn't fix it) but I'll try repairing permissions,etc.  Thanks!
    hmmm... Mcbuffy: are you implying that you *don't* get the webloc when dragging an image out of Safari and that this isn't a caused by change to Safari but is a big/conflict in mine?

  • Old pc crashed how can I upload ipod playlist and save to new pc?

    How can I upload my playlist off my IPod to a new pc?

    Be very careful when connecting an iPod full of music to an empty iTunes library.There is very real risk of permanently losing all the music.
    To prevent auto sync, before you connect the iPod go to the iTunes preferences and select "devices", then select "disable automatic syncing for iPhones and iPods".
    An alternative method is to connect the iPod whilst holding down the 'control+shift' keys and do not let them go until your iPod appears in iTunes.
    If you see a message that your iPod is associated with a different library and asks if you want to link to a new one, make sure you press "Cancel".
    If you should click on "Erase and Sync" will erase all the content currently on your iPod and it will be replaced with the content of the iTunes library you just connected to.
    When you've pressed cancel your iPod should appear in the iTunes source list under "devices" and allow you to change the update setting to manage the iPod content manually, and that will let you use your iPod for the time being without the risk of accidentally erasing the contents.
    Then do any of the following to transfer your music from iPod back to the computer/iTunes.
    For iTunes version 7 or later, then you can transfer purchased iTunes store music from the iPod to an authorized computer by using the "file/transfer purchases from iPod" menu. Note that the maximum of 5 authorized computers applies here.
    Find out how to do that here.
    How to copy iTunes purchases from an iPod or iPhone to a computer.
    For all other non purchased content (your own CDs etc), check out the instructions/suggestions here.
    Music from iPod to computer (using option 2). This a manual method using "hidden folders" and although it works, it is a little more involved than other methods.
    Much easier ways are to use one of the many 3rd party programs that copy music from the iPod to the computer.
    One of the most recommended is Yamipod. This is a free program that transfers music from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
    Other free programs are Pod Player, SharePod and Floola and iDump and iPodRobot.
    If you want to recover just the structure of playlists from the iPod (and not the actual song files themselves), there's iRepo for Windows. which I understand has this feature along with all the standard features for these programs.
    iPodRip also has the feature enabling you to reconstruct playlists.
    There is also CopyTrans. This does preserve ratings/playcounts etc if those are important to you but this program is not free. It also supports video transfer.
    More information is contained here.
    Copying content from your iPod to your computer - The Definitive Guide.

  • About adobe voice....how can I download my video and save a copy in my pc?? help me please!!

    (english): I made a video with adobe voice in my ipad mini. I sent by email to my boss, but he needs to save a copy in his pc and he doesnt know how can do this.
    español: Hice un video con adobe voice en mi ipad mini. Lo envie por email a mi jefe, pero el necesita salvar una copia de ese video en su pc y dice que no sabe como hacerlo pues creo que el programa no se lo permite.

    You've added the music to your computer's iTunes library (File > Add To Library) that you want to sync to the iPad ? If you have then you should be able to select the iPad on the left-hand sidebar of your computer's iTunes (if you have iTunes 11 then you can enable the sidebar via option-command-S on a Mac, control-S on a PC) and then use the Music tab on the right-hand side to sync the music to your iPad (if there are downloads on your iPad that aren't yet on your computer's iTunes then you may want to copy them over first via File > Devices > Transfer Purchases).
    Syncing Music : http://support.apple.com/kb/HT1351

  • How Can I take this image and put it in another image? Basically Background but different

    So, I got photoshop today for a project I have to do and have never used it in my life. I am making a childrens book for school and I am trying to pug the corner pug in this photo onto the couch of the next photo. I am going to use the various expressions of the pug in different settings but I want just the pug I choose to be there withouth the other ones or the white background. Im aware that its watermarked, Im just going to ignore that unless someone has specific instructions on how I can get that off aswell. How do I do this? Please be specific, thanks!

    Open the picture of the pugs. On the Toolbar click the icon for the Lasso tools. In my PSE version this is row 2, column 1 of the Toobar; it might be in a different location in your version. On the tools option bar you will see icons for the different types of lassos. Select the Magnetic Lasso. Click on the pug you want and slowly trace his outline. At the end click again to complete the selection. The pug will be outlined in "marching ants".
    Copy this selection to the clipboard: Edit > Copy.
    Now open the picture of the sofa. Paste the pug from the clipboard: Edit > Paste. The pug will be placed on a new layer in the Layers Palette.
    You will probably want to resize him. To do that, activate the Move tool (row 1, column 2 on my Toolbar). Eight handles will appear around the pug. Holding down Shift, drag any corner handle to resize (Shift preserves the proportions). Also use the Move tool to position the pug where you want him using the mouse. You can also use the arrow keys to fine-tune the position.
    <edited by forum host>
    If when you selected the pug you selected some excess white outside his outline you can remove this with the Eraser tool (row 7, column 1). Similiarly if you had not selected all of the pug you can use the Brush to paint in the rest. You can also use the Eraser for example to flatten the bottom of the pug as I have partially done.

  • How do I place an image and insert a different photo for the "mouse down" state?

    I have placed an image within an accordian widget and when I select the "mouse down" area in the states dialog box, i click "fill" in the toolbar and insert the photo i want to display when the image is clicked but this image is "covered up" by the originally placed image and is not seen in my states dialog box.
    I have done this before when i made rectangles and placed images in rectangles. But i soon realized that you cannot add alternative text to images in rectangles for some frustrating reason.
    How do I place and image and have a different image for the mouse down state?

    Hello,
    This effect can only be achieved when you use the images as a Rectangle Fill. And as you mentioned it above, you cannot add alternative text to images because it is added as a fill and not as a image.
    I would suggest you to post this as a feature request on our "Ideas for features in Adobe Muse" section of the forums : http://forums.adobe.com/community/muse/ideas
    Regards,
    Sachin

  • HT201933 How can I use my trackpad and my Apple Magic Mouse at the same time? If I don't have my mouse with me I can't use my laptop. The trackpad only moves an arrow around but doesn't let me click on anything?

    When I want to use only my laptop without the apple magic mouse, how do I disable the mouse so that the trackpad works?

    Hi, thanks for your answer,
    No, I connected the midi-in from the blofeld to midi-out from the virus. I was told to do so by the guy who sold me the ultralite mk3.
    I made some tests before getting the ultralite... I used the Virus soundcard as audio device and I could control the blofeld. But I had to link my monitor to the Blofed Out... then I wasn't able to listent to the Virus. But this way I could play the Blofeld in Logic (but couldn't see any midi data and when I bounced I had no sound)
    That's the main reason I decided to buy an external audio device (to be able to play both the Virus and the Blofeld)
    But I think the way I connected Blofeld to Virus is right because I can see the light which means it receives midi data.
    I think it's more about how to set it within logic...
    And the Blofeld only gets one Midi connection: Midi In
    Both my Virus and Blofeld are also connected to my MacPro via USB, that's the reason I didn't connect the synths to the ultralite via midi...
    thanks for you help! I'm getting crazy lol

Maybe you are looking for

  • Mail apps/plugins to help file messages?

    With the closure of MobileMe I have finally made the move to Lion and with it I had to finally put Eudora to rest... There was a great feature in Eudora where you could simply right click on a highlighted word in an email in your Inbox and it would p

  • Where do i download rented movies to on my macbook pro to then watch offline later?

    Where do i download a rented movie from iTunes to so i can watch it offline on my macbook pro?

  • Authorization values by role table AGR_1251

    hi, I need to find the authorization field values for a user. I am proceeding as follows: Select values from table AGR_1251 but in the field values i.e. for BUKRS LOW and HIGH fields has values '$BUKRS'. Can you tell me that which table will have the

  • Is it possible to set multiple textfield value with a for=loop

    JTextField W1HourTF=new JTextField(8); JTextField W2HourTF=new JTextField(8); JTextField W3HourTF=new JTextField(8); JTextField W4HourTF=new JTextField(8); I have created the above 4 textfields, I want to set all the text field editable using a for l

  • Does anyone here knows how a while loop works?

    The following code works... DECLARE zz NUMBER := 1; BEGIN While zz < 10 LOOP zz := zz + 1; END LOOP; END; If I put a prompt in it like so it does not.... DECLARE zz NUMBER := 1; BEGIN While zz < 10 LOOP prompt Look THEO I am looping...; zz := zz + 1;