How can i replace my ipad if it is disabled and i cant figure it out?

i forgot my iPad's passcode is there a way to replace it for free or an even exchange?

So yu tried everything in step 2:
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.

Similar Messages

I have the newest version of the iPad and can not see it under devices in my iTunes account on my PC. I can however see my iPod touch under devices and sync it. How can I get my iPad to show under devices and sync as well?

I have the newest version of the iPad and can not see it under devices in my iTunes account on my PC. I can however see my iPod touch under devices and sync it. How can I get my iPad to show under devices and sync as well? I have also tried may suggestions on the apple support site and none have worked. Any suggestions are welcome.

You need iTunes version 11+.
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
 Cheers, Tom

How do i unlock my ipad when it's disabled and says connect to itunes

how do i unlock my ipad when it's diasabled and says connect to itunes?

Please see: http://support.apple.com/kb/HT1212 for full details.
Regards,
Steve

How can I REPLACE original RAW files with JPG's and keep my 'Develop mode' edits?

An image describing my problem:
http://i.imgur.com/hcqMYkv.jpg
(Lightroom 5)
'edits' = Edits made in develop mode.
'CR2' = My RAW image file format.
I have existing CR2's with edits for them saved in Lightroom.
I want to replace the CR2's with JPG's, and do nothing else. I want those JPG's to inherit the CR2's edits, but I DO NOT want the edits to be permanently applied to the image.
If I export the CR2's (which have edits) to JPG's, the edits will be permanently applied to them. I do not want this.
If I export the CR2's to JPG's without the edits, I have no way of getting the edits back and will have to redo the work if I use that photo again.
Any solutions? I've been trying for a while and have no idea how to do this.
Q: Why not keep the CR2's?
A: I am uploading these files to an online host (S3) as my primary storage method and uploading CR2's takes way too long with my internet speeds. Furthermore, online storage costs money.
Q: Why not shoot with JPGs instead of shooting raw?
A: I do my initial edits with the raw files and then archive them as JPG's to save storage space. They won't be raw anymore if I apply future edits, but I still have the option of retouching them from the 'original' state and still have my old edits preserved.

Probably the best thing for you to do is simply use lossy DNG format (e.g. export as, or convert to..): raw data is re-formatted with jpeg compression (full-rez or reduced-rez), but all raw settings apply.
If you insist on trying to have a true jpeg file with (mostly) raw settings, then:
The simplest way I can think of to do it without a script or plugin:
* Reset the raw photo (consider preserving things that don't translate well, like profile-based lens corrections and white balance).
* Export jpeg
* Un-reset the image (e.g. using edit history or pre-reset snapshot).
* Sync settings from raw to jpeg (note: omit settings that don't transfer well, or that were not reset..).
* Optionally: Delete raw
To automate/streamline would require a script or plugin.

HT1296 How can I transfer my ipad calendar to my iphone and ipod touch without using gmail?

How can I transfer the Calendar on my ipad2 to my iphone5 and ipod touch without using gmail, and keep them synced?

You could use iCloud, or you could sync them through iTunes on a Mac or a Windows computer.

How can I fix my Ipod Touch thats been disabled and isnt detected in ITunes?

My son gave me his 8GB Ipod Touch that he locked or disabled and it says to connect to ITunes but It dosnt show up on my computer or ITunes.Iv done everything suggested by Itunes support but still cant get it to work. Can someone tell me how to solve this problem? I wanted to restore it but Im begining to think its nothing but a paper weight now.

iOS: Unable to update or restore

HT4113 how can i unlock mi i pod i change computer and i cant unlock it because i cant restore it what can i do to unlock it

how can i unlock mi i pod ? i change i compute i usualy use to unlock my i pod but sisnce i chage mycomputer my new computer wont unlock it how can i unlock it ?

Mespain wrote:
... i chage mycomputer my new computer wont unlock it ...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

How can I unlock ipod touch 5th gen currently disabled and never sync'd with itunes

Basic situation. Ipod touch 5th gen. Passcode forgotten and tried too many times such that ipod is disabled and requested to connect to iTunes. Problem is that the ipod was never sync'd with iTunes so the connection fails. I've only owned it for 9 months or so. I know I can recover all my music through iTunes and my applications through the app store since all of my content was legally purchased. The problem is that I need to also recover my contacts and pictures since this is the only place they exist.
I have read about methods up to 4th generation where you can access a particular file on the device via computer and rename it to unlock the device. That would most likely allow me to then sync/backup via iTunes and recover my data. Problem is that I can only access the DCIM folder via windows manager and it contains no data. Perhaps there is a way to access the device a different way?
Is there a way with the 5th generation to either reset the lock (from disabled to locked with a 1 min wait for retry as an example) to allow me more opportunities to try other passcodes that I may have set (including mistypes etc) or to remove the passcode completely and let me set it to something I will write down this time?
Please do not reply with the standard apple responses of 'sync with itunes' or 'factory reset' and no, I did not sync with the icloud either (I tried but it was unsuccessful for some reason).
The answer doesn't even have to be a free one as I would be willing to pay for the solution if it were guaranteed to work. Since apple seems to want to charge for any type of support, even to ask a question, I am relying on the community for help. Thanks much.

You have to place the iPod in Recovery mode as Apple says and erase the device. It is a security feature.
or
If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone and use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
You can also wipe the iOS device by installing the FindMyiPhone app on another iOS device and using that app to wipe the device.
There is not other way

I need to do slow motion, but i have imovie '08 and i cant figure it out. can anyone help???

i cant figure out how to do slow motion in imovie '08 and people are saying that i need to get imovie '06 but i cant find it!!! HELPPPP! i need slow mo!!!!!

The free program JES Deinterlacer has a slow motion (or fast motion) feature. To use this program you will probably need to look at Help in the JES menu. In the window that opens, click on the Project tab. In the lower right you will see a box labelled "Movie speed". If you want half speed type in 0.5000 (representing 50%). For quarter speed use 0.2500, and so forth. For fast motion, 1.500 represents one and a half times speed and so on.
In iMovie, right-click (or control-click) on the clip that you want to slow down, then select Reveal in Finder. In Finder, open the clip with JES and proceed from there (as I said, you may need to look at Help).
The exported clip can then be reimported to your iMovie Event and used in your Project.
JES Deinterlacer can be downloaded from the home page of the developer Jan E. Schotsman:
http://www.xs4all.nl/~jeschot/home.html
It is also downloadable from this Apple site (but it's an earlier version):
http://www.apple.com/downloads/macosx/video/jesdeinterlacer.html
John

How can I replace my old Airport with new one and keep my network?

I want to replace my 5+ year old Airport Extreme (runs 802g)
Would appreciate advice on how I can set up the new Airport Extreme and maintain my current network (my printer, Apple Tv etc are all signed into my network, would like to keep my network.
Is there a way to transfer settings from the older Airport Express to the new one?

Sorry for confusion; I have a 5 year old Extreme, want to install a new Extreme
Have an older Express as a range extender ad I have a new Exrpress I would set up likewise
Cable modem connnected to the Extreme via ethernet cable
Computers and printer are wirelessly connected to the network

How can I fix my ipad when it is disabled?

I am getting the message from ITunes that it cannot connect with my IPad2 because the IPad access is block with a passcode, the IPad is disabled so I cannot enter my passcode. What can I do to sort this out?

If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

How can I display my ipad on a remote screen and charg it at the same time

I need to display my ipad on a remote screen for 10+ hours a day so I need to be able to charge it at the same time. Is this possible?

The best way to charge the iPad is with its included AC charger. If it is not doing something energy intensive, it can be charged and used at the same time and not deplete the battery, especially if services that are not being used are turned off.
Can you share more about the situation or environment in which you want to employ the iPad and which model you want to use? The new iPad consumes more energy and takes longer to charge the battery than the iPad 2.

How can I find my iPad without a serial number and without the Find My iPad app?

I LOST MY IPAD 2...I DONT HAVE A SERIAL NUMBER OR THE FIND MY IPAD APP ON THE LOST IPAD...BUT I NEED TO FIND A WAY TO FIND MY IPAD.

All you can do is physically look for it yourself in all the places you may have lost it.

How can i download photos to my IPhone after Disable and Delete ICloud Photo Library?

I`ve started to use Icloud Photo Library, but i`ve decided to not use anymore because just a few photos were uploaded to the cloud.
So, I`ve turned off my ICloud Photo Library entirely at Manage Storage section of ICloud Settings. After that i`ve been trying to re-download my photos to my IPhone, by "Transfer and Keep Originals" set up, but it isn`t working!

You cannot. this is how the iphone handles photos.
ALL PHOTOS synced to iphone can be accessed via the "Photo Library". Those same photos can also be accessed from the folders that you synced. Just as you can find a book in your public library and you find the same book in the fiction section.
Stop trying to resolve it as there is nothign to resolve. All is working as it should.

HT4946 hey my 3rd gen ipod is disabled and i cant figure out how to restore it on this computer

can u help

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

How can i replace my ipad if it is disabled and i cant figure it out?

Similar Messages

Maybe you are looking for